How To Replace Anti Drop Sensors A-Z Full Tutorial. Deebot working Like Crazy? giving Anti drop sensors error? Created by InShot:inshotapp.page.link/YTShare
Dude, this looks so easy when HE does it. "REMOVE ALL SCREWS" - duh.... by the time i get the first one out, he has removed ALL of them! Now I know that I should bring it to a professional repair-shop. Clearly above my skill level!
Can you give us an example of changing out the front anti-drop sensors for a T8 AIVI? I followed your instructions for replacing the side sensors but couldn't tell how to get the front sensors disconnected without damaging anything. Unfortunately changing the side sensors didn't help so I think I do have to replace the front sensors. Thanks for these videos! They've been extremely helpful.
@@ecovacstechnicalsupport5278 I really hope you show how to replace the front sensors soon. My husband was able to replace the side sensors but the front ones we were afraid of breaking something. Thank you.
Thanks for your videos. It’s really helpful. My DX5G 2.5 years old deebot is getting stopped while app is still showing 50% charged. It works again after charging but stops again after around 50% charging left. It doesn’t say my battery is low. Do you think it’s battery or motherboard issue?
salut , j'ai le.meme problème sur mon ecovacs omni x 1 j'ai tout démonter j'ai le capteur mais impossible de le trouver sur internet tu as trouver facilement ? 😢
Hello thank you for the info. I am getting a "clean anti drop sensors" message however none of my sensors are rusty as I have never had water in it. What could be wrong?
Hi, thanks for the video! I have a strange issue where all 3 anti drop sensors from the right side (2 right sensors + right front sensor) are not working - the 2 right sensors are working if I plug them into the left sensor socket (checked with digital cam) - where could be the fault in this case? Thanks! Edit: if I exchange the plugs from the front bumper (right to left, left to right) All anti drop sensors are working, but half of the bumper sensors are dark ^^
Through camera we can see signal but receiver working or not need to test with multi meter or just replace all Anti drop sensors together...not very expensive...time is more expensive
In few videos I informed that if you couldn't find the original parts its ok.. you can buy same led size from any electronic shop & can request a any TV mechanic to replace these new led in ur original sensor..it works...
thank you very much for your answer 🙏 I manage to find the sensor but from the front, do you think that if I replace it with this one, it will work? What I mean is that no matter the location or color of the wires if it matches visually, by soldering the wires, I can make my robot work?
Sir original maybe not available there but nothing impossible...just take out anti drop sensor go to any TV repair shop or electronic shop request to replace those led sensors that's All...same wire & clip can use again if you couldn't find the original sensor then try to fix this way 😉
Thank for tutorial, i have replace righe and left drop sensor but error remaining. I look with phone camera the infrared from sensor and the left side is ok but the right side and front right don't work. the same with new and old sensor. Maybe motherboard problem? Could ou help me? Thank so much
@@ecovacstechnicalsupport5278 I have already change the sensors but still error problem of Anti drop sensors. Could you please tell me, how we can fix this problem? Thank you.
Super video, my deebot 950 have 3 sensors on each side. On the left side non of 3 sensors work, i check it via camera. Is it possible that motherboard is damaged or not working as it should? We dont have service for deebots in my country, could you help me out with that problem?thank you in advance for your response.
Thanks for nice comments...2 types of IR sensor inside...one we can see with camera but signal receiver we can not test with camera... might be that is not functioning...better you open the deebot get help from my video.. available...open n check sensors weather rusty or not...better replace then only can confirm motherboard got issues or only sensors...ir sensors u can buy online
Hi thanks for your nice videos. My ECOVACS DEEBOT OZMO T8 AIVI has got some issue and always showing wheel malfunction or deebot is stuck. But infact deebot will not stuck any where? One of the main wheel is also very tight to rotate with hand. Can you please suggest some service center in Dubai. @ecovacstechnicalsupport5278
Wonderful! You finally brought all my brainstorming to rest. However, now the question is how to reach you to get my N8 fixed? I’m in Delhi. Where’s your setup? Or share your contact details, if you are okay with it.
Hello, I have a deebot ozmo 920. When stepping on a carpet, the left brush stopped spinning.I have very good skills in electronics.found that they were damaged Q1 Q3 R8 0.1oM R9 0.1OM. I replaced them.The robot now reports cleaning the anti-drop sensors. Uou are a great specialist.Please help me and give me a schematic
hi artist, I can't find my sensor for my deebot omni X1, left sensor they are duplicates. it is impossible to find it via all sites. please help me. you will be the boss thanks in advance
Hii. Thanks for the informative video. Im searching for sensors for 950 series but I find only T8 sensors. Are the sensors of T8 compatible with 950? If not where can I find 950 left sensor? Thanks alot
My 6 month old T20 Omni has started throwing and repeated error saying clean anti drop sensors. I can’t see anything wrong with the sensors on external examination. The robot is in warranty. But I must say, Ecovacs makes some really unreliable products.
If it's giving plz put me down on the floor that means wheel sensors not functioning...if any other errors plz give me exact error I'll let you know what's the issue
@@ecovacstechnicalsupport5278 Hi, yes it was keeping telling me to ‘’plz put me down on the floor’’… i did unbolt and cleaned all my anti-drop sensor (water-soap ad definitly been in them 4 days ago when my husband didnt dry out completely the air filter, and the translucid plastic over the antidrop sensor were all ternished on the 2 sides, but no rust yet) this morning and it started back to work! But where is the ‘’wheel sensor located’’ cause if it starts back to get the alarm and not work i’ll look into them! (Do you have a video for the wheel sensor assembling/fixing trouble?) Thanks a lot by the way for your great help and videos
@@user-gq5fe2zh5l other models video regarding this issue available but omni X1 is slightly different in disassembling..so if can wait few days I'll upload video about this topic
Thanks for everything. If ever it bugs again i’ll check for The sensor in the top of the wheels but yes if you have the time to upload new omnix1 videos it would be great! Also, for that model inwas only abble to find a replacement battery but not the wheels or antidrop sendors on amazon/ali express. Do you have any other contact?
Actually with mobile camera we can check only white colour ir sensors which gives red light...but black colour ir sensors can not be test with mobile camera maybe they r faulty.. not receiving signals.....so better can replace anti drop Sensors first
In different regions different models available which can be use through app ..if you bought a model from overseas but that model is not available officially in your region then can not go through with that app...you have to contact with your seller they will provide you a link... using that link only you can connect to that reign s App ..
Ahhh not really...Ozmo 920, 950, T8, T8AIVI, T9 these model left & right sensor are same... Front one also almost same slightly just wire size different
All six of the anti drop sensors from my deebot ozmo t8+ are not turning on. I checked with my phone camera and they are all off while the system is on. Bumper sensor and LDS sensor are working fine. I opened the deebot and checked each sensor and they're clean. No rust no dust no dirt. If all of them are not working is the issue in the motherboard?
@@ecovacstechnicalsupport5278 I will try changing the left and right sensors. I have already bought them online, I'm just waiting for their arrival. I don't know how to change the front 2 sensors though in case they are the defective ones. I found a motherboard on Ali express for $50. If replacing the sensors doesn't work I'll buy the motherboard and change it.
I have manged to fix it. I just had to change both side sensors. I realized the left one had a loose cable to the connector. Maybe that was the issue. Replaced for a new one ordered on ebay and voila! Working fine now. Thanks for the help.
@@ecovacstechnicalsupport5278 sir my debbot frequently move around 360 degree. After one or two days it's work properly then repeat the same. What can I do. Can you guide me
What’s the point of having a cleaning robot if it doesn’t have water proof sensors ??? It’s meant to mop the floor and apparently the sensor shouldn’t contact moisture. Such a comedy this brand is. I threw mine out of the window. Waste of money