How To Replace Ignition Lock Cylinder 1992-99 GMC K1500

Подписаться 474 тыс.

Просмотров 147 тыс.

50% 1

Buy Now!
New Ignition Lock Cylinder from 1AAuto.com 1aau.to/ic/1AIMX00066
If your ignition lock cylinder is stuck or broken and you can't start your vehicle, you can replace it with this new lock cylinder with included keys from TRQ. This video shows you how to install a new lock cylinder on your 1988-2002 GMC K1500.
• Check here for more videos on the 1988 to 2002 GMC K1500 Sierra: • GMC K1500 Sierra 1988-...
This process should be similar on the following vehicles:
1988 GMC K1500
1989 GMC K1500
1990 GMC K1500
1991 GMC K1500
1992 GMC K1500
1993 GMC K1500
1994 GMC K1500
1995 GMC K1500
1996 GMC K1500
1997 GMC K1500
1998 GMC K1500
1999 GMC K1500
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• 8mm Wrench 1aau.to/oa/1AXAA00011
• E5 Socket
• T25 Driver 1aau.to/oa/1AXAA00008
• T25 Socket 1aau.to/oa/1AXAA00008
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXAA00015
• Marker / Writing Utensil
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
Check out our playlist:
GMC K1500 Sierra 1988-2002 4th Gen: • GMC K1500 Sierra 1988-...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@TRQ 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@mrmikemrmike 3 года назад

The steering wheel is locked, hence the need to replace the lock cylinder. How do you turn the steering wheel if the lock cylinder needs replacing?

@zivaandzeusshenanigans1113 2 года назад

There is absolutely no reason to remove the steering wheel..other than that it’s a good video

@lluwd 3 года назад

no need to remove the steering wheel. Also, this vid is only for 95-98 and some 99-2000 3/4 and 1-ton trucks.

@Fuk911 2 года назад

I didn’t think there was either.. I assume this is similar to my 98 s10. Took 10 mins to change and didn’t do half of this.. These videos are cool, but aren’t specific enough and do a lot of unnecessary steps at times.

@philconey11 3 года назад

You handle the airbag like someone that's had one deploy in your hands before. I know the feeling.

@TRQ 3 года назад

+Mountain Mike Thanks for watching our video! 1aau.to/m/Shop-TRQ

@cobyporschifer221 2 года назад

You are the MAN ! Just what I was looking for. Thanks for solid info. Good Vibes 👣

@beardumaw24 Год назад

Excellent video, very easy to follow to replace the ignition cylinder.

@jdeane2649 2 года назад

Very clear and accurate. Thank you

@defiantgoon4061 3 года назад

Turn the switch to the on position before connecting the battery so if the airbag deploys you aint sitting in front of it

@jasonegan5058 7 месяцев назад

What if I can't turn it into the cranked position? Kinda the whole reason I am having to change it out?

@abelvasquez7165 2 года назад

Would this cause the 40 amp fuse to blow? If this was bad? That is the problem i am having. It keeps blowing the 40 amp fuse when i try to start my 02 chevy silverado. When it did start i would start my truck and keep cranking! i replaced the starter and now it just keeps blowing fuses.

@DJ-mix 3 года назад

Good video.thanks

@TRQ 3 года назад

+DJ F. Thanks for the feedback! 1aau.to/m/Shop-TRQ

@jcarlofd91 2 месяца назад

My truck won't stay running, it turns on then off right away , any advice? Thanks Great video

@weswsp01 3 года назад

My ignition switch works fine but there is some going on with it because it won’t let my truck go into “sleep” mode. I have to unhook the battery to keep it from going dead.

@daleemrick9816 Год назад

On my 93 GMC truck after you pull the lock plate and the blinker housing out of the way, there's a 5/16 socket bolt that you will pull out which will enable you to pull the cylinder out.

@ssampson572 5 месяцев назад

Is there a video of a kew switch removed with a lost key?..

@CLONEINK Год назад

What if you don't have the key?

@stevefranklin9920 3 года назад

Very helpful! Only problem is, he don’t mention what you’re supposed to do to keep your truck running due to the parts store bought switch not having a chip in the key. My 1998 GMC K1500 Sierra would not stay running. I ended up having to put the old one back in so I could be able to drive it. Anybody got any info on what I’d need to do to get a new one to work?

@Mo_Gainz 3 года назад

I had mine done at a shop and they guy said the new lock cylinder has to be programmed

@charliela1844 2 года назад

i just did it, what you have to do is turn the truck on, then pull the theft system, while its running (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KRoyl2kikTc.html ) then you can put in the new key

@charliela1844 2 года назад

ps, your key doesnt have a chip, about 2 years to early for that

@chasesmith8544 Год назад

@@charliela1844 Bought my 99 suburban at an auction and came without key, had to put new cylinder in to put it in neutral for towing. It’ll start and shut off when key is let go. Any suggestions? Basically I was not able to remove the theft system while it was running since I had no original key.

@daleemrick9816 Год назад

@@charliela1844 they started putting chips in in 1996.

@johngodley7477 Год назад

Why remove steering wheel?

@infadel13 Год назад

How do you do this with a stick shift?

@RALPHD099 3 года назад

good tutorial, however my truck is now in security mode because of the new parts... some help would be greatly appreciated...

@nappy-oreo6414 3 года назад

So what do I do if I don’t got the keys to turn it to start so I can remove it ? Please help ASAP

@LarrySmith-du6qp Год назад

Show me how to remove without the keys

@chasesmith8544 Год назад

Just had this problem with a suburban I bought at auction, managed to take a 1/4 inch drill bit and drill carefully in to ignition cylinder and it was fairly easy to remove after breaking the little lock pin bar. HOWEVER, without having the original key the theft system prevents me from turning it on.

@user-bk2oh7kn5t 6 месяцев назад

How much does that repair cost?

@JuanGarcia-go1ij 11 месяцев назад

Tanks

@sethhardy8227 3 года назад

How do I change the lock cylinder without a key

@lluwd 3 года назад

try to vibrate it by using an air chisel on a low setting, while turning it at the same time. it has worked in the past

@blancamazariegos6792 3 года назад

Good afternoon & what are the name of the materials that you used in this videos ?

@jamesm568 2 месяца назад

All I did was drill a hole in the top of the steering column bezel then stuck a pic in there and removed the ignition switch.

@tristendady793 2 года назад

Probably a good video, if they didn't waste my time with giving the wrong year range. This interior is only 95-98 and some later year in heavier duty trucks. Was looking for a video with 88-94 interior

@daleemrick9816 Год назад

It says 92 to 99 but that's different than my 93. I don't have the upper and lower plastic.

@SimonTekConley 2 года назад

What I gather is, if I'm doing all that, I might as well upgrade to cruise control in the process

@tinathompson1973 2 года назад

Love you sweetie

@georgeyoung613 8 месяцев назад

This is an outstanding video. Thank you for making and posting this. It's full of very useful information and was extremely easy to understand and follow along with. Much respect 🙏 🫡.