Тёмный

How to replace rear brake pads and discs - Vauxhall / Opel Astra J / Zafira C / Insignia A 

Cars Guide DIY
Подписаться 37 тыс.
Просмотров 47 тыс.
50% 1

In this video you will learn how to replace rear brake pads and discs in this Vauxhall/ Opel Astra J with standard hand brake. With this step by step video you can do it at home using all common tools. And you’re going to save a ton of money and fell proud that you’re fix your own car.
Tools: 16mm socket for brake carrier bolts
Spaners: 13mm and 18mm for brake caliper bolts
Brake piston rewind tool
Brake antiseized grease
Brake silicone grease for guide pins
Brake cleaner
Brake fluid for top up DOT4
Cars guide DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Cars guide DIY recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Cars guide DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Cars guide DIY.

Авто/Мото

Опубликовано:

 

3 май 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 24   
@Arturro671
@Arturro671 Год назад
3:18 you do not ,,have to have" this tool - if you have a angle grinder at home, you probably also have a key/wrench for it (to change discs). It fits almost perfectly with those slots - I had to take 0,5mm from the key ,,knobs" for it to fit right in. Then, I just started to turn it right/screw it in, and it went back like showed in this video. If you have this tool - I AM SURE it is easier to use etc. - but if you have not, think twice if you really have to get a tool you're gonna use once in few years. Just wanted to share this with you, because I know folks who when they see a tool they do not have, they immediately go to a shop/garage/mechanic and pay triple the amount. Why do that? Cheers, great video :)
@us3804
@us3804 7 месяцев назад
Could i use a scissor if dont have it?
@attilabori4734
@attilabori4734 5 месяцев назад
@@us3804i dont think it's a good idea...you slip and easy cut the rubber dust cap with the sharp tips...(and possibly can hurt yourself too)...
@attilabori4734
@attilabori4734 5 месяцев назад
@arturro great tip many thanks!!!👍 (I used an old bicycle tool-the flat one with multiple openings- drilled and fixed two 5mm screws with same distance as the slots on the piston) Cheers again and you take care! A
@us3804
@us3804 5 месяцев назад
​@@attilabori4734that is a great idea, thnx!
@us3804
@us3804 5 месяцев назад
​@@attilabori4734could you pls tell me the distance btw the screws?
@Bigos12
@Bigos12 2 года назад
bardzo dobra robota 👍
@KawasakiVersys-bt8cc
@KawasakiVersys-bt8cc Год назад
Good vidéo. You should paint everything with a metallic spray. Your Astra is super rusty downstairs. Good Idea for the Grease. My Astra j has 195 000 kms. Not to much problem, instead dpr end egr valve to clean. I have my own receipt to clean everything. White spirit, acéton, trichloréthylène and vaseline oil in the tank (30 cl) sometimes.. Good saturday🇫🇷😊
@Mrmobilemechanic_London
@Mrmobilemechanic_London 6 месяцев назад
Nice video
@yasityatim4850
@yasityatim4850 Год назад
Hi bro , I need your help . Can u provide me a video on how to replace LH brake light for Opel grandland x . Thanks.
@HorrorbleDriver
@HorrorbleDriver Год назад
Can I do this on the Opel Adam as well? 2015 model
@Sachertortehmmlecker
@Sachertortehmmlecker 6 месяцев назад
Hello, handbrake is propably not attracted to get the caliper off. What is the correct position for the jack stand? The jack is in the rear position of the sill. Greatings from Germany
@manueljosemateos261
@manueljosemateos261 2 года назад
Enhorabuena por el vídeo ¿El pistón de la rueda derecha también se comprime girándolo a la derecha? Gracias
@jmn495
@jmn495 2 месяца назад
Si
@gazza1927
@gazza1927 9 месяцев назад
I can’t get the calliper on the pads are on correct but seem a bit thick would it be ok to sand them down
@attilabori4734
@attilabori4734 4 месяца назад
Why sanding down?
@abbas1872
@abbas1872 2 года назад
Wow your voice and accent have changed.
@MeaHeaR
@MeaHeaR Год назад
Every one say the piston has to be align But Nobody say WHY ¿¿¿¿¿¿¿¿¿¿¿¿
@danallsopp7441
@danallsopp7441 5 месяцев назад
Or else the caliper won't slide back over the pads due to there being a little indent on the piston that allows it to slot over the pads
@MeaHeaR
@MeaHeaR 5 месяцев назад
@@danallsopp7441 oh thanks 😊 dude 😂😆👦🏿👍🏿
@Lawrence-Joseph-Norse
@Lawrence-Joseph-Norse 2 года назад
Repent to Jesus Christ! Are you a sinner? Luke 5:32 King James Version 32 I came not to call the righteous, but sinners to repentance. Luke 13:3 King James Version 3 I tell you, Nay: but, except ye repent, ye shall all likewise perish.
@greasy23
@greasy23 2 года назад
Trying to copy Chris Fix on every level, just do your own thing instead of waving your arms about.
Далее
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,3 млн
Try not to Laugh Game!
00:38
Просмотров 5 млн
Vauxhall Astra H - Rear Brakes Replace
20:07
Просмотров 22 тыс.
Opel Astra/Vauxhall J REAR Brake Job. Step-by-Step
16:52