HOW TO Replace the Chain and Sprockets (on a Suzuki GSX650F)

Подписаться 2,5 тыс.

Просмотров 50 тыс.

50% 1

I'll start by saying a massive thanks to my mate Ollie for helping out on this one and supplying some of the additional tools.. show him some love in the comments :)
In this video I show you how to change the chain and sprockets. It is quite a fast paced video after all the editing but the original was close to 30 minutes long which is just too much.
If you haven't done this change before I would recommend giving yourself a day to not worry about rushing it and maybe even a weekend if you want to go all out on cleaning everything really well.
I purchased this kit from ebay (literally just typed in "chain and sprockets for GSX650f)
www.ebay.co.uk/itm/Suzuki-GSX6...
I paid £85.50 GBP
Tools Needed:
Paddock Stand/Center Stand
Cross Head Screwdriver
Flat Head Screwdriver
4, 5 and 6mm Allen Key
Socket Wrench
Socket Wrench Extension
8, 10, 14, 22, 27 and 32mm Socket
10mm Wrench
Torque Wrench with 6.5 - 115 Newton Metres of Range
Additional tools/bits that would be useful
WD-40 (for cleaning parts)
Multipurpose grease
Thread Lock
Impact Gun
Wrags
Gloves
A second person
Bungee Chord / String
Follow me on Instagram - / cjmph
Follow me on Twitter - / cjmph
Gear I Use:
Camera: amzn.to/2ojYqtH
Slider: amzn.to/2fOCSX8
Slider Ball Head: amzn.to/2wwNHjS
SD Card: amzn.to/2pvDBPX
Mic: amzn.to/2ok08eN
Main Tripods: amzn.to/2oIOtqU
Small Tripod: amzn.to/2pvyxLz
LED Light: amzn.to/2yHUckG
Kit Bag: amzn.to/2oIH8aD
Useful Bike Bits
Paddock Stand: amzn.to/2pvAOXb
Bike Lock: amzn.to/2oRB027
Oil: amzn.to/2pvIbgX
I would never expect it but if you want to support the channel and help me make better videos, anything on here will do exactly that: amzn.eu/dxuRuox

Авто/Мото

Опубликовано:

21 ноя 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@ADOGGBOY 4 месяца назад

I know these are pretty old Videos. But for this bike there are almost no maintenance or repairs videos available. Just wanted to thank you for your time and service to Gsx 650f owners. Though I don't think you'll ever see this. Thank you again from across the pond.

@UneasyRider 6 лет назад

make sure you take a picture of the gear change selector rod at the position you took it off! I put mine on the wrong angle and couldn't select the gears properly. Lesson learnt!. Great video as always matey.

@nicksinishtaj8518 2 года назад

Wanted to make sure i said a HUGE thanks from the americas mate. This was a huge help on a bike that has sat for almost a year! God bless and god speed!

@humanbeingpeaceandlove3850 3 года назад

For those of you who are just wanting to replace the chain alone, break the old chain and use something to link the new chain with the old, spin it around until you have the new chain on and secure it. Takes less time and keeps everything the way it was if you don't have all the proper tools.

@7eye7 5 лет назад

About to do this on my Baby blu. I need to start collecting the shit i need. Thanks playa, this helped so much haha

@jordizee 6 лет назад

Another great video..showed us everything we needed to know.. But there's just one thing......A Green Fred Perry?

@tommyk5624 8 месяцев назад

I'm gonna start to do mine soon. Was told to cable tie the clutch lever in first ? Any point? Your video was bang on. Very good information and clear instructions, Cheers

@650GSF 4 года назад

Bloody hell mate your were not wrong about that sprocket nut being tight, I spent about 3 hours trying to get if off on my own, I think my breaker bar looked more likely to snap than for the nut to undo. Got if off this morning it took a 1 inch drive breaker bar with a heavy trolley jack handle used over the handle for extra leverage.

@simonkerr5169 Год назад

Thank you very much, gave me confidence to change mine. I would like to see one more thing though, your partners reaction to the oil on your carpet 🤣

@mcopeland5426 4 года назад

I'm following your lead. The allen bolt at the speed sensor is what mm? Also, the front sprocket bolt is what mm? Thanks!

@mfojon5926 6 лет назад

Justo la semana pasada lo hice! Buen video.

@CJMPH 6 лет назад

Nice one. Gracias amigo

@virgiliuoprea3287 4 года назад

Good job, i have gsf650 k8 but dont have press instrument

@rotherham1962 4 года назад

Very informative many thanks.

@CJMPH 4 года назад

Thanks, glad you found it useful, thanks for commenting

@virgiliuoprea3287 4 года назад

Good job and thx for video

@CJMPH 4 года назад

No worries, thanks for commenting

@Anderson-p 3 года назад

to measure the chain slack, don't you have to pull it down too?

@ageinggolferbiker3869 6 лет назад

Hi there I'm finding your videos interesting as iv just bought a 2012 bike same as yours.. My question is have you ever change your head light bulbs as I would like to put LED.s in the 2 small driving lights ?

@CJMPH 6 лет назад

Ahhhh, found your original question now :) Hopefully I've sort of answered that with my reply to your other comment... I haven't changed my bulbs yet but they defiantly need to replaced as the standard ones just aren't bright enough in my opinion. I believe you just need to add load resisters when changing the bulbs to LED ones... I am going to try and replace mine to the Philips one I mentioned in the other comment, so I will record myself doing that of course... Thanks for commenting and hope you enjoy the bike, they are awesome as I'm sure you know

@rikkibeattie5174 4 года назад

cheers - very helpful.

@CJMPH 4 года назад

No worries, glad it helped. Thanks for commenting mate

@craigmartin3855 5 лет назад

Good video, the pace is bang-on. What did you use to break/rivet the chain? Looks like a DID KM500, any info would be good. Especially if it's not that one (as it's over £100).

@CJMPH 5 лет назад

Thanks mate, I actually borrowed the tool from a car mechanic mate as I couldn't justify buying one either as they are expensive. I'm not sure of the exact one I used but it does look like that - but I imagine they all similar :) Sorry I cant be of more help

@craigmartin3855 5 лет назад

@@CJMPH Cheers for the reply, much appreciated :) I ended up getting a £20 chain breaker and riveting tool off e bay and it was bang on. However, I did completely flatten the head off the rivet with an angle grinder before pushing it through to split the chain and took my time when joining the new one. Vernier calipers are essential too.

@iphil91 6 лет назад

i liked the videos, where you have shown us your tools, from the beginning a little bit more. i guess for international viewers it's better to see your tools

@CJMPH 6 лет назад

To be honest, I started recording the tools but then I forgot to do some and I was just trying to get it finished as quickly as possible :)

@iphil91 6 лет назад

ah ok i see :) at least it's still a pretty good video !

@michaelkennedy8573 2 года назад

Why did you use the impact gun only too slacken the nut and not just buzz it all the way off?

@YAESUMEN 6 лет назад

Nice job, but next time I recommend cleaning up front sprocket area from old fat and dirt, preferably with a brake cleaner and compressed air.

@oscarmuffin4322 5 лет назад

Nah, just give it a soak with some kerosene, scrape all the crap off and jam a pressure washer on it.

@grantross663 4 года назад

How did you get the first nut off the front sprocket? Your Hand was in the way. Is it the allen key coz mine don't wanna move!

@CJMPH 4 года назад

grant ross hi mate, is it the one at 3:00 that you’re talking about?

@jedigeekbiker 4 года назад

with the chain splitter, did you grind head off the old link or just put splitter straight on? cheers

@CJMPH 4 года назад

Was a while ago when I did it but pretty sure there was no grinding the old link and it was splitter straight on. Thanks for commenting and good luck if you’re replacing the parts 👍

@jedigeekbiker 4 года назад

@@CJMPH cheers and thanks for sharing. :)

@StormAutoAdventures Год назад

These questions are for anyone... I just bought a low mile, 2008 GSX650F. What is the difference if I go with a one tooth less sprocket up front, and less teeth in the sprocket in the back, versus if I went with a one tooth less front sprocket, and a rear sprocket with more teeth? Versus going with a one tooth less front sprocket, but use the OEM rear sprocket? Versus just using a rear sprocket with less teeth, and not touching the front sprocket? How would these all compare? It's so confusing lol. I hear that a lot of people like going with a front sprocket with one less tooth, and a rear sprocket with more teeth? Any help with this would be great! Thanks guys 👍

@luispaulomaia9396 5 лет назад

Brasil ✌👏👏

@650GSF 4 года назад

made a start to this today, but as I thought would be the case, I didn't have a socket big enough for the front sprocket , do you remember what size it was ? my mate will probably have one in his collection.

@CJMPH 4 года назад

Hi mate, sorry I cant remember which size that was.. I listed these sizes in the description "10, 14, 22, 27 and 32mm Socket" so guessing its the 32mm but it was so long ago and pretty sure I had to borrow that one too :)

@650GSF 4 года назад

HI thanks for the reply, got a socket of my mate today, yes it is the 32 mm I will get the chain and sprockets off tomorrow.

@CJMPH 4 года назад

@@650GSF ah nice one, good luck mate

@hayabusabart 2 года назад

Hi. Great video! But I only want to change my front sprocket (from a 15 tooth to a 17 tooth) the bike has hardly done any miles and the chain & rear sprocket are fine. Question. Do you think that by slackening off the chain by the rear wheel it will allow the chain to disengage/reengage the front sprocket without having to break the chain?

@Xenro66 2 года назад

I'd like to do the same to mine as well, 1 tooth on the front just to calm the revs in 6th a bit at cruise. I haven't attempted myself by my set are fairly new, or at least my standard for "worn" is different lol. Still, if you've tried this and you only slacked the back wheel, let me know. You'll save me a tonne of effort 😅

@iphil91 6 лет назад

2:46 at least you have an oiler :D imagine how it looks with just normal chain-lube :D

@CJMPH 6 лет назад

I know, the oilers can be a pain but they do look after the chain

@petersmith7001 5 лет назад

what lube do you prefer to use on the chain?

@CJMPH 5 лет назад

I cant actually remember the last lot of lube I brought as my bike had a scottoiler so always brought their standard blue refill

@oscarmuffin4322 5 лет назад

Just use gear oil and a small brush, don't buy into all this fancy lube crap.

@cksrobloxlife8540 Год назад

If you don’t have a chain breaker, you can always use bolt cutters

@jacobm3785 4 года назад

What year is the bike?

@CJMPH 4 года назад

This was on a 2008 model

@IMMU16 3 года назад

@15:22 what’s that pipe sticked to swing arm .dont have on mine one thanks

@oscarmuffin4322 5 лет назад

See, look at how much faff this is. On a Gs500 this is a 10 minute job without having to remove half the electrics and plastic.

@iphil91 6 лет назад

oh CJ btw i sold mine :(

@CJMPH 6 лет назад

I saw on your Instagram :( Sad to see it go

@iphil91 6 лет назад

she is in good hands now (female hands :D ) but year, i was totaly ....sad is not even close enough a word for. maybe next year will come a new one. But i've told the new owners about your channel :D

@CJMPH 6 лет назад

Haha, thanks mate, you are too kind :) Hopefully you will be back on 2 wheels next year