How to Sealcoat Asphalt Pavement - SealMaster 

With one speaker on my phone, my time has come. 😂

HA! Paid more for the music than the voice audio. Mono for the win!

Yep

Just for the video

I have seen your video they are awesome 👍

Billy Goat sucks. The housings break and the impellers are plastic. Toss a 9hp Honda on an old Bannerman or get yourself a Scag Little Wonder. The only reason the Little Wonder crack cleaner they showed in the vid are good is because it has the dual belt that does not toss belts twice a week.

@@tocarules I'm debating between a heat lance or the Little wonder for cleaning cracks prior to hot melting with my RY10 Pro. Is the lancer better?

​@@jerrysmith9780 I hope your talking Little Wonder edger and not a blower. Blower will do nothing. The Dollar Store sells elongated wire brushes on a stick that will work better than a blower or a lance. The heat lance only looks impressive. The best thing is a gas powered walk behind edger. I recommend the Little Wonder edger @4:55 as the commercial edgers have the dual belt that also work wonders for edging grass. Single belt models blow a belt once every few hours. Dual belt last years before belt replacement. Not only for crack cleaning, but using the wire brush for edging eviscerates the grass so you dont have a long string of sod to put in a wheel barrow to hide under a bush somewhere. Just blow it off into the lawn and your golden. I buy the 8 inch twisted wire wheels and to be sure they come with the little plastics washers to adjust for your arbor diameter. Dont crank the nut on too tight either as the direction of the wheel naturally tightens the nut. If the nut ever did happen to come lose, the wire wheel will just stop spinning. Just saying as that if you have a wheel on a long time they can be a beech to get off as you need a pipe wrench on the dual v belt and one on the nut itself. If your gentle tightening the nut you can hold onto the wire brush with your glove and a wrench on the nut. Ten times faster than the pipe wrench way. If you ever get into a really deep edging job where the grass is overgrown 3 or more inches, I cut up an old lawn mower blade as they are 1/4 inch thick, dont dig into the asphalt/cement etc and last way longer. Dont fret about not being balanced as after 10 minutes of use, it will be balanced. I dont even worry about the arbor size matching. Just use the large washer and as before, if the nut comes even slightly loose, the blade stops working.

asys Nirvana some people do put seal coat on road,but is not necessary,I worked for a asphalt company in the northwest and we used both method buggy squeegee machine and after it dryout,a spry coat and then stripping

@josue Elizondo same view ,thanks a lot ... it helped

what does a walrus need tupperware for. It doesnt make sense. plenty of fresh food in the sea

C L18 hahaha!!

Liar

You d!ck ....this is what u call a big head

Thanks Dillinger. FU

Says who

Fuck you too - douche!! Spell it out - it’s more effective.

Says the guy who sells the equipment.

the ultra-rare type🤣🤣

What a stupid comment

you tell em Nate!

that means that liquified coal tar is best for this. Forget the enviro-friendly part.

@@rearspeaker6364 coal tar in general is always cut. My point is they don't watch what their distributors do to it, and they completely trash their product

LIAR

@@daveklein2826 Oh, all caps. Someone must've gotten mad.