Outstanding details and instructions for repaired on the trx420. It has been a wealth of information that will be a tremendous help with working on my 2013 trx420. Thanks.
had the same problem, got it sorted all thanks to your video, the regulator was giving the .5 reading but where it should be giving no reading it was giving a 1.7 so something was definitely wrong
What should be the voltage coming out of the regulator rectifier when it's off the machine? Thank you for your video hope to hear from you soon. Also I'm only showing 15 volts coming from the stator at idle when revving it can go up to 35 or more
My 2008 Rancher 420 has a voltage from the stator of 13.68 on all three. I am guessing that is too low? What should a 2008 TRX420 ES 4x4 be? The output from the rectifier is only 8.98 Volts. to the battery.
What might be the problem if it will not start but you move the gear shifter to the left of neutral before you go into reverse and then press the starter and it starts?
I have a Honda 125M I got a new Battery for it I ran it not even a block around my house I parked it for a few minutes it will not start no Neutral light or ignition all dead at this time regulator rectifier not sure what it does I ran a screw driver between the two bolts and I got spark it was trying to start but no go I am running 14.00 volts at this time I checked the fuses they look ok not sure what to check next please Help
What would happen if you miss a line a trx350fm 2006 4x4 swingarm bolt? Would it cause the swingarm bolt to fallout and not torque to spec? And the swingarm bolts are rusty I'm asking because I've went through it and couldn't figure it out