Тёмный

I Don't Think I can FIX this.. Jeep Wrangler Rock slider install and Tub repair 

Muddy Beards 4X4
Подписаться 58 тыс.
Просмотров 10 тыс.
50% 1

In this videos i bust out the sledge hammer and try to repair my bent tub. I end up cutting out some of the tub, bend, pry and press the tub into submission. I am happy with the way it tuned out!! The ‪@barnes4wd‬ rock slider change the look of the jeep, in a good way!!
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd.com/?ApplyPromo...
Get your OnX Offroad Free trial and use Coupon code “Muddybeards” for 20% off your subscription. subscribe.onxmaps.com/offroad...
Get 10% off your Yes Welder purchase and using coupon code “muddybeards”
yeswelder.com/?ref=dVU5yUQ6
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards4x4” www.olightstore.com/s/8A018Z
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerusa.com/discount/...
Tools I Use, MotivXTools: www.motivxtools.com/
10% off coupon code: muddy
www.setpowerusa.com/discount/...
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Авто/Мото

Опубликовано:

 

15 окт 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 84   
@anthonyraines5951
@anthonyraines5951 Год назад
I'm just gonna say I breathed a sigh of relief that I was already a subscriber...
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣 awesome thanks🤟🏻
@OleNasty79
@OleNasty79 Год назад
Harbor Freight has a stud welder for around $100 and it works great.
@TheScoundrel70
@TheScoundrel70 Год назад
A fairly heavy slide hammer style Dent puller can work wonders and can be used for many other strange situations and puller situations.
@johnfitzgerald5158
@johnfitzgerald5158 Год назад
Precisely what i was thinking. That or rigging up some threaded rod through a steel plate from behind to pull evenly on the whole rocker panel by cranking on nuts at each hole.
@vwclub3
@vwclub3 Год назад
Portapower with a wedge also
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Yea slide hammer would work, but I don’t have one, and didn’t want to buy one
@csabin312
@csabin312 Год назад
I just used a 2x6 3/16th rectangular tubing for rock sliders..
@richardstack4818
@richardstack4818 Год назад
Ive looked for this all my local shops say that its an uncommon size. Where do you aquire tube like that
@MacsSpecialitiesMotorsports
Can't wait for the boatsides!!
@jimferguson602
@jimferguson602 Год назад
My dad flopped his zj and we pulled the b puller out with a 2x4 and a winch 😂
@DerekStormer
@DerekStormer Год назад
Home Depot Carries the truck bed paint. I just painted my whole jeep with it. Funny I bought em all too.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Every time I go they don’t have the one I want. There is 2 rust oleum truck bed coatings. one I like and one I don’t. And the cans almost look the same too, I have been fooled before.
@DerekStormer
@DerekStormer Год назад
@@MuddyBeards4X4 Me too. I have pretty much a full can of the Rubberized can. They are pretty Identical. I keep the other stuff on hand for scratches and stuff. I like it as well..
@Thatjeepguy1996
@Thatjeepguy1996 10 месяцев назад
I miss the tj videos hope to see more soon!
@jeepindave5464
@jeepindave5464 Год назад
I've been subscribed for like 2 years 🤷‍♂️
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
I see you Jeepin Dave, I know you have been around a while. We appreciate it!🤟🏻
@jeepindave5464
@jeepindave5464 Год назад
@@MuddyBeards4X4 if you and my assigned fbi agent ever run into each other it may get awkward.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
😳🤣
@jfloydsea
@jfloydsea Год назад
This is why I have frame-mounted rock sliders. If they get hit and bend, my body isn’t taking damage with them.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Yup, future plan for sure
@bradywilliams2666
@bradywilliams2666 Год назад
Yep. I cut the body under the door frame and welded in 1.5" square tube. Then ran the same down to the frame. Skinned this with 3/16" plate. Been through hell over the past 10-12 yrs.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Nice 👊🏻
@SkyBlueOffRoad
@SkyBlueOffRoad Год назад
Holy body work man...Nicely done.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Haha, thanks
@vwclub3
@vwclub3 Год назад
Portapower with a wedge for those tight spots
@scottChapman25
@scottChapman25 11 дней назад
1:11 🎉 1:11 1:12
@scottChapman25
@scottChapman25 11 дней назад
1:16
@PaulKaiser42
@PaulKaiser42 Год назад
Great repair and awesome video 👍🏻
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 🤟🏻
@kylancook3477
@kylancook3477 Год назад
Probs for working that all out in a small garage, I have a 1.5 car garage and I feel the pain...
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Yea it’s tight in there. I have too much crap lol.
@jaredwilliams5252
@jaredwilliams5252 Год назад
Future tip a big nut and an eye bolt are your friends when dealing with body when can’t access backside. Weld/tack outside of the nut to dented panel thread in eye bolt and strap/cable to something solid. Pull while massaging the panel
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Nice, good tip. 👊🏻
@jaredwilliams5252
@jaredwilliams5252 Год назад
@@MuddyBeards4X4 I wheel an 87 square body suburban so have my fair share of having to “massage” its body lol
@bigrockoffroad1779
@bigrockoffroad1779 4 месяца назад
Subbed! I was one of those 85% 😂
@MacsSpecialitiesMotorsports
Wow Kelly you do body work like I do!! lol..... PROs for Show!!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Haha, 👊🏻
@machinesinc
@machinesinc Год назад
Came out looking great! Just had to do similar work in my last video on my Jeep to straighten out my rear bumper. When metal gets that twisted it’s tricky!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks 🤟🏻
@rocklanderoffroad
@rocklanderoffroad Год назад
I literally just did the same thing to my LJ 2 weeks ago. I was so twisted up I didnt know my rear tire was about 3.5 feet up on a boulder, slid off and caught the bar. Basically pushed in the body like yours did! Im living with it for now LOL.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Man, it sucks for sure. I lived with it for 2 years until I finally got to fixing it.
@TJY2K
@TJY2K Год назад
Maybe you could try adjusting the door hinges or latch to make it a little easier to open.
@thomastheriault9188
@thomastheriault9188 Год назад
Professional Frame machine
@StormbornJKU
@StormbornJKU Год назад
I actually find it surprising when people watch a channel consistently and aren’t subscribed. Like how do you find the videos and stay up to date? So odd.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
I was surprised as well…
@jaredwilliams5252
@jaredwilliams5252 Год назад
@@MuddyBeards4X4 I originally started watching through someone else’s account so couldn’t subscribe at first. I would just check back every Sunday or Monday till I got around to making my own account
@MacsSpecialitiesMotorsports
True That!
@MacsSpecialitiesMotorsports
@@MuddyBeards4X4 5:00 LOL
@keithfetterly4111
@keithfetterly4111 Год назад
Hahahaha, I had to subscribe just for your honesty! 👍
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks bro👊🏻🤣
@robertthrem3382
@robertthrem3382 Год назад
Easy fix with a porta power
@themanthelegend7048
@themanthelegend7048 Год назад
Cut this tub into pieces Now I got some extra jeep parts
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣
@inspireonex
@inspireonex Год назад
I was hoping you'd fill/weld up the fuel door hole in your rear quarter protector while you had it off. Maybe next time.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣 yea, I have been getting this a lot. I plan on running different fender in the near future so I didn’t spend the time to do it. That was over 2 years ago… so, yea.
@OnTheSideOff-Road
@OnTheSideOff-Road Год назад
Why the decision to not weld the filet cut in the tub back up with some new sheet metal???
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Too much work, it’s a wheeler. I could throw some seam sealer on the inside between the tub and rock sliders, that would be easier. I might do that…
@phillippearce9680
@phillippearce9680 Год назад
👍
@chadlazarus3586
@chadlazarus3586 Год назад
Things like this happen, all the time. I would think about looking into a pogo stick. They are great for jobs like this
@calebberglund53
@calebberglund53 Год назад
Is there any reason you haven’t covered the old fuel fill hole? Low key drives me crazy lol
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Haha, I always think about it, but I plan on changing fenders soon so I don’t want to spend time or money one it.
@calebberglund53
@calebberglund53 Год назад
@@MuddyBeards4X4 makes sense, I’m surprised you haven’t just tack welded a plate of metal behind it just for a temporary fix
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Yea…. I think about it every time I look at it😳
@calebberglund53
@calebberglund53 Год назад
@@MuddyBeards4X4 DO IT!
@mariotibbrine1
@mariotibbrine1 Год назад
Slide hammer?
@MacsSpecialitiesMotorsports
Agreed!
@YouTubeDoxedMyRealName
@YouTubeDoxedMyRealName 2 месяца назад
Could had left the rock slider on their and pulled it out with a winch...
@Tbmx8
@Tbmx8 Год назад
That was hard to watch, cutting the side of the tub 😅 Turned out great though 👍🏻
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣 thanks.
@douglasrodrigues8361
@douglasrodrigues8361 Год назад
It didn't seem necessary to cut off anything?
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
It was… I could have cut less but the gap was more than 1/4” smaller when I was done.
@Kyle-ev4fk
@Kyle-ev4fk Год назад
you need to drive over the rocks, not into the rocks.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣 I guess that might help..
@juanmcsweeney4503
@juanmcsweeney4503 Год назад
Why would you install sliders onto the rocker panel? It definitely defeats the purpose of sliders doesn’t it? If u had sliders that were mounted off the frame you wouldnt have rocker damage.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
They don’t make a rock slider for a TJ that comes off the frame. They are all made the same way. If you want that you will have to fabricate your own, which I will do in the near future.
@aaronmckannan8936
@aaronmckannan8936 Год назад
That is a splitting maul. Not an axe Not a hammer lol Damn west coast guys
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Very true, I grew up on a farm, split wood for heat since I was 10, raced motorcycles, ect. So yes I am aware.
@gearaltpreston5192
@gearaltpreston5192 Год назад
ᵖʳᵒᵐᵒˢᵐ
@DanDuprea
@DanDuprea Год назад
I am subscribed to your channel but I’m going to unsubscribe if you don’t put some sheet metal over that old gas tank filler hole! 😆
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣 Man you guys are killing me with that gas tank filler hole, lol. I guess it’s on the list now…
@robertthrem3382
@robertthrem3382 Год назад
Why wouldn’t you just cut them sections off and throw them away they sell those and I don’t even wanna watch no more to see if you welded that back together before you put your rock slide on it is no longer structurally sound
@robertthrem3382
@robertthrem3382 Год назад
I’m not gonna subscribe, I only watch to laugh at you
@bradywilliams2666
@bradywilliams2666 Год назад
Was thinking you were going to do something cool. IE boatsides. Nope. Disappointing.
Далее
WORLD’S STRONGEST BUDGET ROCK SLIDERS
10:01
Просмотров 36 тыс.
Penalty: Portugali - Slloveni
02:03
Просмотров 1,2 млн
The last one surprised me! 👀 🎈
00:30
Просмотров 4,9 млн
Wrangler TJ Slider Install from JcrOffroad
7:18
Просмотров 64 тыс.
Jeep TJ Repairing Tub Side Body Mounts
27:30
Просмотров 7 тыс.
Cylinder Offset Changes Everything
23:45
Просмотров 2,5 млн
The S10 gets ENDURO Joints, new hydro assist Ram!!
23:10
Jeep YJ Rocker Guard Install
14:48
Просмотров 3,8 тыс.
INSTALLING ROCK SLIDERS W/ NO DRILLING REQUIRED
7:09
Мгновенная карма 😱
0:10
Просмотров 1,5 млн