Installing and Setting Up the Kasa KS230 Smart 3-Way Dimmer Switch

Подписаться 87 тыс.

Просмотров 86 тыс.

50% 1

In this video we will show how to Install and Configure the Kasa KS230 3-way Dimmer Switch. This smart 3-way dimmer installs as quickly as a traditional 3-way switch with the added benefits of a dimmer and the freedom of use and control that a smart switch provides.
FIND US AND FOLLOW US:
Facebook: / tplink.na
Twitter: / tplinkna
LinkedIn: / tp-link-research-america
Instagram: / tplink
Website: www.tp-link.us
Subscribe and be the first to see the latest news and products from TP-Link.

Наука

Опубликовано:

4 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 117

@maurocandido 6 месяцев назад

Took me a while to understand, but now I do have the 3 way dimmer is installed in my basement stairs... Pretty decent video !

@hellachuckles 2 года назад

The pictured wire diagram in the video is the opposite of what is actually being demoed. I smoked a kit because of it. I also think one of my kits came dead on arrival too, as it appeared that the wifi was already set up.

@TPLINKTECH 2 года назад

Its actually not. As is stated in the video you simply need to make sure that you properly identify the Line and Load wires. Also you need to make sure that the same wire is used in each box as the traveler wire. For example if you label the red wire traveler 1 then in the other box the red wire would also need to be traveler 1.

@TPLINKTECH 2 года назад

@@perriponders289 No it shouldn't. The main switch has the Line and the Satellite has the Load wires. Load is what carries to the light. The traveler wires are what tell the two switches what is on and off, and as long as you use the same wire in both boxes for the same traveler 1 or 2 it should not matter which one is label 1 or which is labeled 2.

@TPLINKTECH 2 года назад

@@perriponders289 that's unique. Usually the traveler wires in both boxes are the same color so like in the video Red for what we used as traveler 1 and black for traveler 2

@TPLINKTECH 2 года назад

@@perriponders289 Not sure really I don't have access to inventory levels but I am told that attentively it should be around the end of the month.

@qx4n9e1xp 2 года назад

Yep, this video confirms I installed everything correctly 🤦‍♂️ I set the app & everything up. The 3-way dimmer switch was added, and did the little self-dimming test, but the secondary switch doesn't work when you press it. Only the first switch & in-app controls work. So there's something else wrong with the switches. I'm gonna check my router when I get home.

@TPLINKTECH 2 года назад

You may need a Firmware update. Please reach out to support for assitance.

@john_thorpe Год назад

Did you get this to work ... I'm looking at possibly picking up some of these??

@qx4n9e1xp Год назад

@@john_thorpe We gave up on the 3-way switches, and just used the single smart switch, with a pair of "dumb" 3-way switches that offer traditional button-press on/off & dimming functions. After Amazon sent 2 replacements, we sent them all back because they had the same problem.

@s.cgrimaldi9692 2 года назад

Hi, any news when this model will be released in Canada? Do I need two units for a 3 way installation or can one be a HS230 and the other switch a regular 3 way switch? Thanks!

@TPLINKTECH 2 года назад

Hello unfortunately no. This channel is ran by the US team and we do not get release windows for other regions, even our neighbors to the north. You can Email CA support support.ca@tp-link.com and they may be able to tell you. We are told that both switches have to be replaced. The 2nd switch is a "dummy" satellite switch but i am told they still need to be used in tandem with each other.

@eddude2571 10 месяцев назад

I have added this switch successfully in my last home, but somehow in the new home the wire colors don't match from main to satellite boxes and I'm not sure if I fried the switch or not as it just stays constant orange without blinking. I switched the traveler wires in the satellite and it doesn't seem to make a difference and switched the traveler wires in the main and still solid orange.

@TPLINKTECH 10 месяцев назад

I would suggest reaching out to an electrician to determine which wire is which. They would be able to assist with unusual wire colors. Once that is known the device can be properly installed.

@deftdawg 2 года назад

I got one of these kits from Amazon, seems the satellite is unresponsive to input nor does it's button illuminate, the main switch is still able to power the light on and off however (I.e. power goes through the satellite's traveller/load terminal)... wondering if I've done something wrong or it's DOA. 😟 EDIT: I just noticed the 3rd brightness level dot from the right on the master is permanently illuminated, is it trying to tell me something?

@TPLINKTECH 2 года назад

You will want to contact support.

@sherwindewitt9386 2 года назад

When do you think the 3 way smart dimmer switch will be available? I am in the process of finishing out our house in smart switches and want to use Kasa but need several 3 way smart dimmers. I would hate to go to a different brand.

@TPLINKTECH 2 года назад

We are not sure yet. We are working on a concern to make sure the full launch is successful.

@EatLotsOfCurry 2 года назад

How can you tell the difference between load vs traveler wire on where the dummy unit is to be installed?

@TPLINKTECH 2 года назад

Usually its based on how the old switch is wired.

@cr1171 2 года назад

I just also installed an HS200 and it keeps turning on at 11:55am even though it is not scheduled to turn on. I’ve had to schedule it to turn off at 11:56 am. How do I fix this? Thanks!

@TPLINKTECH 2 года назад

Make sure you do not have Away mode or Timer enabled. Other than those features the only way for a switch to turn itself on is if its recovering from a power outage/brown out and the switch is set to return to last on state, or if there is a schedule for On enabled. If none of that is true please contact support.

@curtiswhite2267 2 года назад

Has this item been released for sale in the United States. I have been attempting to find it on the web and through Amazon no joy

@TPLINKTECH 2 года назад

It is but inventory was depleted. Amazon should be restoring the inventory soon.

@Royan1900 Год назад

Can you install the satellite switch on a different location, separate from the circuit which the main is installed?

@TPLINKTECH Год назад

HS210 can but the KS230 has to be the same 3-way circuit.

@LUCKas1212 2 года назад

I bought this for a group of 5 lights that have 3 different on/off switches currently. How do I get this to work?? I've tried multiple configurations

@TPLINKTECH 2 года назад

What you have is a 4-way environment. The Switch is a 3-way switch and not designed for such a scenario. This FAQ explains these scenarios better. www.tp-link.com/us/support/faq/1372/

@BigLui2909 2 года назад

Lol let a real electrician do the work.

@jackattack9799 Год назад

Can you use this switch as a regular single pole switch? purchased this by mistake thou it was just a regular dimmer

@TPLINKTECH Год назад

No the KS230 is exclusively designed for a 3-way run. The HS220 is the single-pole dimmer.

@MrDoordude125 Год назад

Hey guys love the product but I have a question for you. It says you can group together multiple switches so that you can turn a group of switches on with one tap on your phone. Is there any way you can program the switches so that when one switch is pressed it will actually turn on the switch you pressed but also other switches in the house? Or is this feature only for the app?

@TPLINKTECH Год назад

Yes actually there is. Use the smart action "Control with a Switch" This Smart Action will allow one switch to trigger other Kasa products including bulbs, plugs and switches to change status when a switch is triggered.

@MrDoordude125 Год назад

@@TPLINKTECH so I could technically make 2 switches control one set of lights using this programming even though the switches don’t have 3 way wiring between them correct?

@TPLINKTECH Год назад

@@MrDoordude125 Yes but each switch would have to have the smart action setup on it.

@alonsoped 7 месяцев назад

Love this thank you!

@zayvick1675 Год назад

can this control a ceiling fan too

@TPLINKTECH Год назад

No but there will be a fan/dimmer switch releasing soon. It will not be a 3-way though.

@cr1171 2 года назад

Can I use the 3 way dimmer on a 2 way (one wall switch not two).

@TPLINKTECH 2 года назад

No. The KS230 does require both switches to be used. We do have the HS220 single-pole dimmer though

@jasons418 2 года назад

Hi, Are you going to be releasing just the main switch instead of the kit? If so, do you know if it will work with a "dumb" satellite switch on the other side? Thank you!!

@TPLINKTECH 2 года назад

At this time no there are no plans for a single item pack. We are told that the two switches are needed for proper function, even if the satellite switch is a dummy switch. This could be accurate or simply that single switch with existing switch function was not tested. If you try it please let me know if it worked. Keep in mind that if you do the traveler wires need to be the same at both switches.

@SantiluX 2 года назад

What if i have 3 gang o lights, exist a Smart 3-gang Switch from Tp-link?

@TPLINKTECH 2 года назад

As in you have multiple switches in a single large switch box in your wall? That shouldn't matter the KS230 can still be used as long as one of those switches is a 3-way, you replace the other 3-way switch with the 2nd switch in the kit and have all the appropriate wires. You will also need to have a universal Decora style multi-gang faceplate. TP-Link does not make those at this time.

@sreenathnagarur Год назад

I did set up as mentioned but on main switch it always blinks red. My wiring is correct as shown on video. App keeps saying to check wiring but it is correct. When I do reset on main switch , it switches to flashing between amber and green. With that I go through app which says check for wiring to swap terminal 1 and 2 / do a restart. When I do restart it comes back to red light blinking all the time. I am not sure if this a buggy switch from Amazon.

@TPLINKTECH Год назад

Have you confirmed that the main switch is on the line and not the load side? If so then we would recommend contacting support for assistance.

@sreenathnagarur Год назад

@@TPLINKTECH yes main switch is on live wire side. Satellite switch is on load side. Main switch is always on with red wifi signal which means it has live wire all the time. Right ?

@TPLINKTECH Год назад

@@sreenathnagarur actually a Red Wifi inidcator would mean either the switch is disconnected from the WiFi or the wiring at the time of onboarding was wrong. Keep in mind that the V1 and V2 have slightly different wiring, but have the same requirements. Both switches must be used, Cannont be used on a 4-way circuit, Sat unit must be on the Load side.

@sreenathnagarur Год назад

@@TPLINKTECH this is a V1 switch. This is the first time I am installing switch , so wifi won't be connected. It starts with red rapid blinks & then after app sends me in loop not offering a solution which works.

@TPLINKTECH Год назад

@@sreenathnagarur I would suggest contacting support for assistance.

@edric_munster5531 2 года назад

Has anyone got this too work in connect with the kasa 3 way switch? It seem silly to have 2 dimmers.

@TPLINKTECH 2 года назад

No the KS230 and HS210 are not compatible. Wiring is different and in the KS230 both units are needed to creating the circuit. This is different with the standard 3-way HS210 switch which can be paired with a manual switch.

@pavangupta336 2 года назад

I'm curious about when this will return to being in stock for US buyers on Amazon. Right now it appears to have a very long wait. And reading the details here, I take it the bugs in the KS230 kit's firmware have been fixed, right? How can I purchase these devices, they'd be perfect in my home!

@TPLINKTECH 2 года назад

We did recently receive inventory in our warehouse so I would assume soon. The product sell page is up. www.amazon.com/Kasa-Smart-KIT-SmartThings-KS230/dp/B09CX9G1WT/ref=sr_1_5?crid=3RETI67MZ3WVF&keywords=KS230+Kit&qid=1643217741&sprefix=ks230+kit%2Caps%2C112&sr=8-5

@user-je9eg3qu6y 7 месяцев назад

I have 3 wire. 1 it’s line, 1 it’s travel but 1 it’s neutral? I connected it doesn’t work.

@TPLINKTECH 7 месяцев назад

3-way switches will have to traveller wires 1 line or load wire (depending on side) and possibly 1 ground and 1 neutral. The neutral wire is required.

@davedempsey3404 2 года назад

Like most, been waiting a long time for these. Im now on my third replacement and still the dimmer turns itself off after a few minutes - the firmware update fixed NOTHING! Support is horrible. This is totally unacceptable. 😞

@Angel-mp6xu 5 месяцев назад

will the switch work with 2 live and 1 neutral wire?

@TPLINKTECH 5 месяцев назад

Switch 1 (primary) needs 2- traveler wires 1 - live wire 1 - neutral wire. Switch 2 (secondary) 2- traveler wires 1- load wire. We do recommend the ground being used as well.

@eebenitez373 4 месяца назад

After installing these, my light doesn't turn on at all, or dim whatsoever. Both switches look like they work fine however, showing the dimming level and even on the Kasa Application I can turn them off and on, dim, but my light never actually comes on.

@TPLINKTECH 4 месяца назад

It is likely a wiring issue. Check to make sure the primary switch is installed on the Line side and satellite switch is installed on the load side. You will also want to make sure that both traveller wires are installed the same way. You may need an electrician for assistance if you are unsure.

@jaehmm 2 года назад

Is installation different between kasa switch vs regular switch? I'm trying to work with contractor and they are charging more installation fee for it so was wondering if there's difference.

@TPLINKTECH 2 года назад

It can be. It all depends on the wiring.

@chrisdunstan7537 Год назад

Is the contractor configuring the kasa software, or just installing the physical switch? The configuration is extra work, but the physical installation is the same.

@secretstorymusic Год назад

Do both switches carry the same MAC address?

@TPLINKTECH Год назад

no, because only the main switch is actually connecting to the network the 2nd switch is a dummy switch, still required, but does not connect to the network.

@secretstorymusic Год назад

@TPLINKTECH So there will be no MAC printed on the secondary switch? I have 4 3-way kits and I got the switches mixed up so just trying to pair them back together.

@TPLINKTECH Год назад

@@secretstorymusic Not that i know of. There should be a serial number on them and that would be how we could identify the pair. The Serial number should be identical, except for 1 character. for example the Main unit could be 231116000A01 and the sat could look like 231116000B01

@secretstorymusic Год назад

@@TPLINKTECH Thank you for being so attentive to my needs. I really appreciate it. Cannot wait to automate scenes in our new home So exciting.

@oddassembler Год назад

Does the Switch emit any light when it is off, to any extent?

@TPLINKTECH Год назад

Yes, all of our Switches have a small, white LED circle that is illuminated when the switch is "Off". For most this light is dim and easy to ignore but for a few "light Sensitive" customers there have been concerns about its brightness. Some of our switches allow this light to be disabled

@oddassembler Год назад

@@TPLINKTECH Does this specific model allow the light to be disabled?

@TPLINKTECH Год назад

@@oddassembler V2 and up yes.

@FitStanley 8 месяцев назад

@@TPLINKTECHcan you confirm if HS210 KIT can turn off the status light? I can’t determine if it’s V2 or not.

@TPLINKTECH 8 месяцев назад

@@FitStanley no that feature is not available on the HS210 at this time.

@akaalfie5404 Год назад

Has anybody purchased this recently? I've been interested in buying for years, but people's reviews are all over the place. Wasn't sure if the kinks have been worked out yet.

@TPLINKTECH Год назад

Yes, since the V2 release the KS230 has been stable.

@goodforalaugh 2 года назад

Your video and diagram don’t match each other. On the satellite switch on video you have load (black) wire and traveler 2 black wire together on same connection and on video it shows black and red on same connection. Went with the diagram as that’s what works. Other than that thank you for the video.

@TPLINKTECH 2 года назад

That is because the diagram was made after the recordings were filmed and we were unable to do a reshoot. Although they are different as long as the traveler wires are the same for each switch then it won't be a problem.

@jevaughnszn Год назад

Can this connect to Alexa?

@TPLINKTECH Год назад

Yes TP-Link's Kasa product line is compatible with Alexa. You would just install the product using the Kasa app, then using the Alexa app link Kasa using the Kasa Smart Skill.

@jevaughnszn Год назад

@@TPLINKTECH ok thanks

@DrZaius57 2 года назад

When?

@TPLINKTECH 2 года назад

It should be very soon. We are working on a few concerns raised by early adopters and once those are all addressed we will be able to release it fully.

@DFProductions2011 2 года назад

@@TPLINKTECH its listed on your site, but when I click buy, I get a 404 error page not found

@TPLINKTECH 2 года назад

@@DFProductions2011 It is but the buy link is currently disabled until a few concerns are sorted out.

@DFProductions2011 2 года назад

@@TPLINKTECH what are the concerns?

@henrytoh4217 2 года назад

@@TPLINKTECH it's now available to purchase on amazon, is it fixed?

@ananmatai 5 месяцев назад

I get 230 different then the one on the video

@TPLINKTECH 5 месяцев назад

The wiring of the satellite unit was modified on later versions. the load is a seperate wire rather than connecting to the screw with traveller 1.

@dylconnaway9976 Год назад

Monetized video... really? Couldn't make this ad free?

@TPLINKTECH Год назад

Just because there is an ad doesn't mean the videos or channel is monetized. We don't have an AdSense account so none of our videos are monetized.

@micro7vista Год назад

I have many Kasa switches and your 3 way kit is by far the most irritating one to install, your diagram has never worked for my home ONCE! I always have to end up just switching wires around till it works. Always hate installing your 3 way switches.

@TPLINKTECH Год назад

We would recommend that if the video and diagrams do not help to reach out directly to support. They can help walk you through the process.

@JeffRogers-ik2mh Год назад

This is essentially a useless video. I like the switch, but TP-Link needs to be more informative about covering different set-ups.

@TPLINKTECH Год назад

There aren't any different setups. For the KS230 there is one way to install it and one way to configure it.

@gregcolletti4502 2 года назад

Can this be used with a 4-way switch in between the two 3-way dimmers?

@gabrielzheng5056 2 года назад

no, KS230 KIT can only be used in 3-way circuit, and the two switches in this KIT are master-slave kind that need to be used together

@bjfire01 2 года назад

I want to know this also, if there is some way to make it work despite some saying no

@dhavalpatel2143 Год назад

@@bjfire01 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cRohQMz8w_o.html This could help, I am also eager to know.

@valerikatamadze2041 Год назад

Can this be used with a 4-way switch in between the two 3-way dimmers?

@TPLINKTECH Год назад

The HS210 can, but the KS230 dimmer cannot.

@valerikatamadze2041 Год назад

@@TPLINKTECH thank you for the information. Are you planning in future to make a dimmer switch that will work with the four way switch? And also your single pole switch and dimmers work with apple home kit but 3way switches won’t

@valerikatamadze2041 Год назад

@@TPLINKTECH I really love using your switches. They are amazing and you should make double rocker switches. I was able to find three-way dimmer, and the baraka switch for my other company but I really would like to stay with you so please let me know if you will be making those switches in the future, thank you

@TPLINKTECH Год назад

@@valerikatamadze2041 The new KS200 and KS220 were the first Kasa switches designed to work with HomeKit. A 3-way version has not been developed yet, but will likely. No there are no current plans for a 3-way dimmer for a 4-way environment. But I will suggest it to the team.

@valerikatamadze2041 Год назад

@@TPLINKTECH that would be wonderful because other companies already have it, I just wanna stay with you guys and all my clients love the product. You should also think about making a double rocker switch.