Installing VVTI Gear + BC adjustable CAM GEAR and a CUSTOM EXHAUST in our 2JZ LEXUS IS300 

Yes it is probably the best option to do both at the same time, we wont going to buy the cam gears at the time, hence the reason why we did this process twice

correct, you can advance or retard timing by +2 or -2 degrees

hi @Random Kid , correct our is300 is the 2JZ GE VVTI, no problems what so ever, our car runs so good now we are extremelly happy! Items purchased are : BC CAMSHAFTS- www.golebysparts.com.au/products/brian-crower-2jzgte-2jzge-vvti-camshafts?_pos=3&_sid=09d3e0c79&_ss=r&fbclid=IwAR0O4UtFatYa3OYtajRkvK6eESL4S78FDrxWbSQC2z-Yn41CsUzvHvNmzGg BC CAM GEAR- www.golebysparts.com.au/products/brian-crower-2jz-adjustable-cam-gears?variant=15659849777261&fbclid=IwAR0resEp9WXurbLoodO4ZwQAAWKUkTW2VvMG8eVqZnwhdctEj9oaJK-PCfc

@Paul B well while the cam gear was off basically putting a new part is always best option, plus it’s not too expensive for the cam gear anyway, so we opted to change the complete unit rather than just the seal!

​@@AutoMotiv8ed so just installed the new one there's no procedure on lubricating or priming it first cuz the new one out of the box is dry and if you shake it around a little bit it cling and clangs

@Gwana m Hi, yes we did dail it in off camera

There is instructions on where you set the cam gear. Your tuner also will have more flexibility in tuning your car with the cam gear

@Paul B the cams make car feel like it has more top end power! And pulls more harder thoughout the gears! Very noticeable, but have yet to dyno for proven figures

@@AutoMotiv8ed no tune?

@@AutoMotiv8ed just plug and play no tune and you noticed a gain?

@@josesandoval4274 yep that's right, they are "drop in cams" dont require tune but uts reccomended for maximum performance

@@AutoMotiv8ed did you advance or retard the exhaust gear?

@Spencer Clark Hi, great question To simplify it for you, cam gears increase torque and horsepower without having to change the camshaft(s) and are mandatory for engines that are milled, forced induction, high compression and/or utilizing aftermarket competition cams BC adjustable cam gears deliver the easiest way to dial in more horsepower and/or torque without getting underneath the valve cover, disassembling the engine or dealing with onboard electronics. Hope this helps 👌

@@AutoMotiv8ed would you say it's a noticable difference in power with the cams and the camgear installed?

Mostly just changes where the power peaks. Can dial it in to shift your power from low mid or higher in the rpm. They don't really add more power. Just adds tunability and allows very fine for specific builds.

@Paul B exhaust is "lta industries "