Тёмный

Inventorying the Stanley No45 combination plane w/ a brief overview of the parts 

Just Plane Fun
Подписаться 7 тыс.
Просмотров 11 тыс.
50% 1

Volume 1 in a series on the Stanley No45 combination plane. Come along and let’s see what components were originally included in a new Stanley No45 when first purchased off the shelf.
Also covered - a brief description of some of the parts and a look at what you need most vs. what parts are maybe less important to have initially.
#stanley; #handplane; #handtools; #combinationplane; #no45

Опубликовано:

 

8 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 67   
@nickmastro9287
@nickmastro9287 4 месяца назад
Thank you for sharing your knowledge. I have been waiting a long time to purchase a 45 and just recently found one that didn’t cost an arm and leg. I have found your videos very helpful for all my planes.
@justplanefun
@justplanefun 4 месяца назад
Thank You for watching! I’m very glad to hear that you’ve found these videos helpful 🙂
@What_Other_Hobbies
@What_Other_Hobbies 2 года назад
Definitely needed this video, need this video and will need this video.
@jamesmeier432
@jamesmeier432 Год назад
What an awesome resource, especially for someone new to a 45.
@justplanefun
@justplanefun Год назад
Thank you 🙏🏻
@glideking
@glideking 2 года назад
That was a lot of fun. I use the cam rest for any cut where I want to stabilize the plane; helps keep it vertical. Slitter would have easily popped that wood off if you had done the other side as well. 45 is a very handy tool. Use mine all the time.
@kcirful
@kcirful Год назад
Great video and very detailed. Thank you!
@justplanefun
@justplanefun Год назад
Thanks for watching! I really want to do a similar video on the No55 but time is proving to be elusive.
@derekdolecki2759
@derekdolecki2759 2 года назад
Great video MJ. As CS would say " Cheers "
@josephglover3595
@josephglover3595 2 года назад
Thanks again. This was very helpful 🙂
@solosniper86
@solosniper86 2 года назад
I was lucky enough to have a complete cam rest with both No 45s I have. I recently found one with a micro fence as well. I was super excited about. Great video series so far!
@g.m.h.dr.ratheiser2109
@g.m.h.dr.ratheiser2109 6 месяцев назад
Great instruction - thanks a lot, Gershom Ratheiser (the Netherlands)
@justplanefun
@justplanefun 6 месяцев назад
I’m glad you found it helpful!
@philipchandler330
@philipchandler330 8 часов назад
Thanks so much just received mine today. I need some reference material you mentioned for setup and operation if you have available. I would like to order from you.
@georgeb.wolffsohn30
@georgeb.wolffsohn30 6 месяцев назад
I received a #45 from my great uncle after he died . Now maybe I can gdt to using it.
@justplanefun
@justplanefun 6 месяцев назад
They’re great once you get the hang of it. Just don’t give up!
@snort455
@snort455 Год назад
thank you! great content and presentation.
@justplanefun
@justplanefun Год назад
Glad it was helpful!
@arboristBlairGlenn
@arboristBlairGlenn 9 месяцев назад
Great presentation. Thank you
@justplanefun
@justplanefun 9 месяцев назад
Thanks for watching! Let me know if you have any questions or if you need any parts.
@arboristBlairGlenn
@arboristBlairGlenn 9 месяцев назад
@@justplanefun I have two 45’s (one pretty complete in a box), I have a 46 with cutters and a 55 in a box that looks almost new. In fairness, I hardly ever use them but you have inspired me to get them out and try. I also have a large collection of wooden planes that I enjoy getting them to work again. I’m also a RU-vidr with my channel called Arborist Blair Glenn on trees and tree care.
@billenger865
@billenger865 2 года назад
Thanks for the informative video! It's very timely for me, as I just fell down the rabbit hole. I now have a very incomplete 45 with good bones. Will be asking you about some parts!
@justplanefun
@justplanefun 2 года назад
Sounds great. Look forward to hearing from you
@markvankoersveld5881
@markvankoersveld5881 Год назад
This is very helpful.
@justplanefun
@justplanefun Год назад
I’m very glad to hear that!
@RGRGJKK
@RGRGJKK Год назад
Pura vida mi amigo great review could you made a video about a type study of the Stanley 45 combinations planes ? Pura vida
@morganhurst_redridge
@morganhurst_redridge Год назад
Great video, just picked one of these up tonight for a great price, with the only issue being that the set screw for the adjustable fence was sheared off. I was able to get everything apart without damage but do you have any advice on removing what's left of the screw and then finding a replacement?
@justplanefun
@justplanefun Год назад
If you’re on Facebook, find me there at Just Plane Fun - the parts division. If not, feel free to email me some pics to jplanefun@gmail.com
@johnnyzone1967
@johnnyzone1967 Год назад
Videos like yours are great for knowing what to expect when buying or what to buy thereafter 👍. I received a Stanley no.45 in the mail on Thursday. Looks like a similar year with the SW logo as well. I negotiated down to a more reasonable price as it lacks the camber leveller, the two auxiliary depth stops and the cutters except one 1/8” iron that was in the tool. After an initial cleaning and oiling it appears to be mechanically sound. I have a set of no.50 cutters that I will notch on the side and use while I wait for a good deal to come around. It’s my preference to buy tools in needs of restoration to use. I would not want to use a museum piece and the tool becomes a personalised to my style of use.
@justplanefun
@justplanefun Год назад
I’m glad it was helpful! I have plenty of no45 irons available if you ever want to chat about prices and such.
@johnnyzone1967
@johnnyzone1967 Год назад
@@justplanefun Thanks MJ, I live outside the USA, can you direct me to your website (or recommend alternative) and I can contact you through there.
@josephtowers5959
@josephtowers5959 Год назад
My complete Stanley 45: metalic box...
@justplanefun
@justplanefun Год назад
Sounds like a gem!
@Mr_Rick
@Mr_Rick 5 месяцев назад
Excellent presentation! Have you ever tried using Lee Valley's combination plane fluting blades in the Stanley 45?
@justplanefun
@justplanefun 5 месяцев назад
I haven’t tried that before. I have a contemporary Veritas plane but it’s the skewed version so the irons wouldn’t be compatible with a Stanley 45
@Mr_Rick
@Mr_Rick 5 месяцев назад
@justplanefun If you look at the LV site the blades look like they'd work in the 45. I've read from others that they'll work but wondered if you tried. LV is a good source of they do work. Cheers!
@rustysnails
@rustysnails 6 месяцев назад
Great vid. Much help trying to get my head around latest purchase. It's missing a few bits and pieces that I will acquire over time. The one part I am curious about is the thread on part 86, the fence arm set screw on the movable fence. The other flat head thumb screws and the arm set screws all appear to be 1/4-28 not easily found in Australia where metric rules. Can anyone offer help with thread specs?
@justplanefun
@justplanefun 6 месяцев назад
It should be a 10-28 thread. I have reproduction screws available and I have 10-28 taps and dies available. I also ship to Australia regularly so let me know if you’re interested. I send one large box to one customer but there are smaller packages inside said box. The recipient catches the box and forwards all the smaller packages using your postal system
@Vincent-S
@Vincent-S 2 года назад
Haha yeah the screwdriver would be nice, as well as the spares. I just got an almost complete 45 with the cutters for super cheap and the screw for the spurs are just barely useable to remove. Do the screws and spurs on a no. 78 fit on the 45? Still fun to use though! I’m planning on trying to make a couple hollow and round bases as an experiment since those are supposed to be rare.
@justplanefun
@justplanefun 2 года назад
The spurs themselves are interchangeable between the 78 and the 45 but the spur screws for the 78 are longer and won’t fit the 45. I sell replacement screws and/or spurs if you need some
@martydom666
@martydom666 2 месяца назад
Icneed a left sided fence for a Stanley 55 and the blade boxes i got all the blades. Also i need a screw that locks the skate adjuster where the rods slide in. Idkcthe name of the locker
@justplanefun
@justplanefun Месяц назад
Email me at jplanefun@gmail.com or find me on Facebook at Just Plane Fun - the parts division
@Mr_Rick
@Mr_Rick 5 месяцев назад
Do you have any pointers on how to sharpen the "slitter" that is used for veneer?
@justplanefun
@justplanefun 5 месяцев назад
The way I understand it is each of the 4 “faces” should be flattened separately in order to bring the edges to a point but I’ll be honest - I’ve never sharpened one before
@RGRGJKK
@RGRGJKK 11 месяцев назад
Pura vida mi amigo could make one video about each type thanks .pura vida guys
@justplanefun
@justplanefun 11 месяцев назад
I do plan to make a type study video for the no45, I just haven’t made the time to create the video yet
@fredpierce6097
@fredpierce6097 Год назад
It’s a wonder that anybody can find a complete 45 given the myriad of parts!
@justplanefun
@justplanefun Год назад
Fortunately there have been collectors out there for a long time. They’ve blessed us by preserving these old tools. Now it’s up to us to keep it going…
@vincethomrm
@vincethomrm 7 месяцев назад
So there's more than one #45 model? My 45 has no micro adjustable fence 🤔
@justplanefun
@justplanefun 7 месяцев назад
Lots of them have a fixed fence. The really early 45s didn’t have wood on them
@timbarry5080
@timbarry5080 Год назад
What is an original, full set going for now? Original box, instructions, everything in seemingly unused condition . Thank you
@justplanefun
@justplanefun Год назад
It depends on where and when it goes up for sale. $300-400 is not unrealistic for a complete No45 as you’re describing
@timbarry5080
@timbarry5080 Год назад
@@justplanefun thank you. There is one on ebay right now. I was gonna pull the trigger on it but I just had to spend a bunch of money on my truck today lol. Thanks again!
@j.d.1488
@j.d.1488 Год назад
MJ, wife picked up a bunch of planes for me. Have a 54 , just missing rods both short and long. Are 50 and 54 interchangeable?
@justplanefun
@justplanefun Год назад
The no54s are fairly uncommon and I don’t own one but to the best of my knowledge, the parts are all interchangeable between the 50 and 54. I have long rods (standard issue) available for it. Just to be sure, you meant 54 and *not* No45, correct?
@j.d.1488
@j.d.1488 Год назад
@@justplanefun Yes. #54 Came with 3 of 8 blades. Are you an Ebay seller as well?
@justplanefun
@justplanefun Год назад
I do sell on eBay but I don’t have much for no50 stuff listed right now.
@j.d.1488
@j.d.1488 Год назад
What's stores name for future.
@ruaraidhmaccormick4677
@ruaraidhmaccormick4677 9 месяцев назад
Where can I get the black covered book do you have them for sale
@justplanefun
@justplanefun 9 месяцев назад
You can try eBay. Unfortunately I don’t have any currently
@bigsecondrow
@bigsecondrow Год назад
Hi, can you help me find two brass screws for the handle of a Stanley no. 12 scraper please?
@justplanefun
@justplanefun Год назад
You can find me on Facebook at Just Plane Fun - the parts division or email me at jplanefun@gmail.com
@mjac8373
@mjac8373 2 года назад
Nice channel new discovery for me. Am wondering if you have spare parts for sale for Stanley planes?
@justplanefun
@justplanefun 2 года назад
Absolutely. Spare parts is the heart and soul of what I do. Feel free to join us at “Just Plane Fun - the parts division” on Facebook or email me at jplanefun@gmail.com
@jimcarter4929
@jimcarter4929 Год назад
You're a smart fellow on Stanley planes, so I have a question, but maybe not necessarily in your wheel house. I have asked a few people and no one seems to know answer. On Stanley later series (5 digit) plow combination plains not have a 3/4 inch cutter? For example my 12-250 has 17 piece cutter set and three others but goes from 5/8 to 7/8, skipping 3/4 and it is not listed as available in manual.Just curious to me.
@justplanefun
@justplanefun Год назад
That is a great question and unfortunately I don’t have an answer either. I’ll have to look around and see if I can find something out.
@clintbrown4691
@clintbrown4691 Год назад
My thought would be in that era most of the so called one by dimensional lumber was 7/8 now one by is 3/4......
Далее
Luiza Rasulova #luizarasulova
00:37
Просмотров 1,2 млн
Stanley 45 Combination Plane Demo
40:37
Просмотров 31 тыс.
How to Setup a Combination Plane Stanley 45 and 55
17:28
The Affordable Combination Plane Stanley 50
12:19
Просмотров 20 тыс.
The Surprisingly Essential Plough Plane
16:09
Просмотров 189 тыс.
The Real Reason The New Yankee Workshop Ended
8:19
Просмотров 657 тыс.
Comparison Between Stanley 45 and Stanley 55
8:53
Просмотров 38 тыс.
Slitting with a Stanley No.45
14:35
Просмотров 22 тыс.
HOW TO USE A STANLEY 45 COMBINATION PLANE
30:32
Просмотров 14 тыс.