Тёмный

Jeep Towed Vehicle Wiring & Charge Line Install With Hopkins RV Toad 56200 and Roadmaster Charge Kit 

RV Habit
Подписаться 17 тыс.
Просмотров 28 тыс.
50% 1

Read our blog article on the Jeep Towed Vehicle Wiring & Charge Line Install With Hopkins Toad 56200 and Roadmaster Kit at www.rvhabit.com/post/jeep-rug...
See the Hopkins Vehicle Wiring Kit 56200 on Amazon: amzn.to/2H9ERR8
See the Curt 6 Pin Mount 57208 on Amazon: amzn.to/2Vuh5mK
See the Curt 6 Pin Connector on Amazon: amzn.to/2XzoTpt
See the Roadmaster Charge Line Kit 156-25 on Amazon: amzn.to/2XxoQdu
See the Hopkins 7 Pin RV to 6 Pin Coil Cord on Amazon: amzn.to/2NBiTYB
See Dielectric Grease on Amazon: amzn.to/2T8qoMt
See Tacklife Wire Stripper Multi-Tool on Amazon: amzn.to/2VvkfXk
Shop Amazon with this link at no additional cost to you: www.amazon.com/shop/rvhabit
As an Amazon Associate I earn from qualifying purchases
In this second step of preparing my Jeep as a toad I am Installing a Hopkins 56200 Plug-In Simple Towed Vehicle Wiring Kit and a Roadmaster 156-25 Towed Vehicle Charge Line Kit. I also used a Curt Manufacturing 57208 Towing Wiring Mount, Curt Manufacturing 58130 Trailer 6 Pin Connector, and Hopkins 47053 Endurance 7 RV Blade to 6 Pole Round Nite-Glow Flex Coil Adapter. The complete article can be found on my website RVHabit.com
You can also see the Blue Ox Tow Bracket install at our blog article on the Jeep Rugged Ridge Spartan Bumper and Badland ZXR Winch Install and Review at www.rvhabit.com/single-post/J...
You can also view an excellent video series on preparing your Jeep as a toad by YT channels Get Gone with Us and WeRmudfun.
Part 1 Base Plate: • Part 1 - Jeep to RV To...
Part 2 Ready Break Cable: • Part 2 - Jeep to RV To...
Part 3 Wiring Kit: • Part 3 - Jeep to RV To...
Part 4 Brake Relay Kit: • Part 4 - Jeep to RV To...
Part 5 ReadyBrute Tow Bar: • Part 5 - Jeep to RV To...
Part 6 Brake Monitor: • Part 6 - Jeep to RV To...
Visit us at www.RVHabit.com
Visit us on Instagram at / rvhabit
Visit us on Twitter at / rvhabit1
Visit us on Facebook at / rvhabit
Visit us on Google+ at plus.google.com/+RVHabit
Visit us on Pinterest at / rvhabit
Get your RV Habit Apparel and Merchandise at: bit.ly/RVHstore
Please support this channel by subscribing, liking and sharing this video.

Хобби

Опубликовано:

 

1 мар 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32   
@GetGonewithUS
@GetGonewithUS 5 лет назад
Nice Job Lou! Hey, no bloopers? LOL We like your tail light covers. If you get a chance sometime shoot us a pic with the brakes on. Nice explanation on the plug connections, especially the part about how some RV are wired differently for the 7 way, we lived and learned about that. Thanks for mentioning us in the description, it's appreciated. Thumbs up my friend! 😃
@RVHabit
@RVHabit 5 лет назад
I was so cold and working so fast I actually didn't have too many bloopers this time. Don't worry mistakes come easy to me so I am sure I will have plenty next video. I have read that most RVs are wired with the 12v feed to the 'S' (brake pin). Sure enough mine was lol. Thanks for watching and I will take some pics of the tail lights for you.
@timrover
@timrover 5 лет назад
Great job Lou, I will no doubt keep these episodes in mind when I upgrade to a jeep later this year. Safe Travels!
@RVHabit
@RVHabit 5 лет назад
Hi Tim, is that correct a Jeep is in your future? That's great. Hope all is well. Stay safe, Lou.
@RVEnthusiast
@RVEnthusiast 5 лет назад
Great job Lou! Nice seeing you again. Looking forward to some better weather soon. Fingers crossed.
@RVHabit
@RVHabit 5 лет назад
Hi Bruce, yes it is pretty cold here. My nose was running by the end of the video lol. Looking forward to some videos when you start your pole barn. Stay safe.
@noelk01469
@noelk01469 4 года назад
Great video! I have the jeep wired for the lights with a 4 pin, then realized I need a charge line. Your links and video was a lot of help to find everything. Have thumbs up and subscribed!
@RVHabit
@RVHabit 4 года назад
Awesome, thank you!
@TSchra37
@TSchra37 3 года назад
I didn't know I could charge my toad battery with the hot wire from my motor home. Now I have a new project and thanks for the video!
@RVHabit
@RVHabit 3 года назад
No problem 👍 Glad it helped.
@garyhair8264
@garyhair8264 4 года назад
Hey RV Habit, Just wanted you to know how helpful and well done your video is for the wiring kit for the Jeep. It has given me the confidence to trying it. Keep up up the great tutorials.
@RVHabit
@RVHabit 4 года назад
Thanks Gary glad it helps.
@THEVROD64
@THEVROD64 3 года назад
Plug n play. perfect
@dunlapmichaell
@dunlapmichaell 5 лет назад
I've used a Hopkins kit on both a TJ and YJ and love them. The diodes are the only way to go so you don't have lights everywhere when towing. .....makes it look unchanged but works perfect.
@RVHabit
@RVHabit 5 лет назад
I will say the install was super easy. I tested it out and everything worked perfectly. Thanks so much for watching and taking time to comment.
@RVHabit
@RVHabit 5 лет назад
I also have a blog article on the install with manufacturer installation instructions and links to everything used. Read it here www.rvhabit.com/single-post/Jeep-Towed-Vehicle-Wiring-Charge-Line-Install-With-Hopkins-RV-Toad-56200-and-Roadmaster-Charge-Kit
@FernTheCamper
@FernTheCamper 5 лет назад
Thanks for this video - we need to add a 7pt connector pin for our little tow. I know it's totally different to what you've just done lol. Wish us luck! Just subbed
@RVHabit
@RVHabit 5 лет назад
Thanks for watching. It is not much different than the six pin. Tons of diagrams available on the Internet. Wiring is more intimidating than it actually is. Good luck!
@FernTheCamper
@FernTheCamper 5 лет назад
@@RVHabit Thanks!
@Soffball
@Soffball Год назад
Thanks for the video! This is the one I've been looking for. Very detailed. I do have one question about wiring the 6 pin. My 7 pin on the rv has the positive pin at the 1:00 position as youre looking at. Would that mean I would connect the red wire to the S position? Thanks again and you have a new subscriber
@RVHabit
@RVHabit Год назад
Hi Aaron, The only way to be sure is to connect the umbilical cord to the RV and use a multimeter to identify which pin on the end of the cord is 12v. I hope that makes sense.
@FreedomIsntFree2023
@FreedomIsntFree2023 3 года назад
Thanks for the post! Question.....I installed a similar kit by Curt, that like yours, does not have a provision for lighting the license plate. Seems that this could be an issue for law enforcement when traveling during dark-thirty hours.....have you had any issues with this concern? Thanks
@RVHabit
@RVHabit 3 года назад
Hi, I had not noticed if the plate light are on or off. I will definitely look next time I'm hooked up.
@ARCSTREAMS
@ARCSTREAMS 11 месяцев назад
hi i got a question,, my vehicle was recently towed a few kms from a gas station to a garage because diesel fuel was put in the tank by mistake , i did not witness the towing as it was my mother who was driving the car at the time and supposedly no one touched or worked on the car while it was in the parking lot of the garage as i told them i have not decided what to do after i was given an estimate ,long story short the next day when i went to pick the vehicle up from the garage it would not start, there was enough power to run the dashboard, cargo light radio etc but it would not be enough to crank the engine, i got a boost from the neighbor who drove me there and it seems fine after that, was wondering if the towing had anything to do with draining my battery? the only other thing i could think of is if someone forgot the cargo light on but no it was shut off when i inspected it ,so any thoughts on what may have happened here?
@chessiesabino9929
@chessiesabino9929 3 года назад
What about a trailer brake controller? Do I need one of those as well?
@RVHabit
@RVHabit 3 года назад
Hi Chessie, For most brake devices that go into vehicles you wouldn't but that depends on what brand and type of brake device you choose. If you go with the Ready Brake you would not need a brake controller as that is completely mechanical in nature.
@ecp3031
@ecp3031 4 года назад
Nice job, except the location of the plug below the bumper. That will be the first thing ripped off if you do any serious offroading.
@RVHabit
@RVHabit 4 года назад
that is true, mounting on top of the bumper is safer if your going do any hard offroading.
@davidsierra6682
@davidsierra6682 3 года назад
Most of the parts in the "Roadmaster Charge Line Kit 156-25 on Amazon: amzn.to/2XxoQdu" - you can put together though a local parts dealer. But can you use a 20 Amp thermal circuit breaker instead of a 15 Amp?
@RVHabit
@RVHabit 3 года назад
the fuse would depend on the length and gauge of wire you are using.
@timyedo6510
@timyedo6510 2 года назад
Toad vehicle= frog car WTF towed vehicle= a vehicle being pulled behind It's simple 2nd grade spelling
@RVHabit
@RVHabit 2 года назад
Hi Tim, in the RV world a towed vehicle is commonly spelled toad. grammatically correct....no, but its just the way it is done in the community.
Далее
50 YouTubers Fight For $1,000,000
41:27
Просмотров 63 млн
Do This When You Wire Your Trailer!
8:11
Просмотров 21 тыс.
Wiring 7 Way Plug For RV
21:28
Просмотров 11 тыс.
Ява 638 сегодня в Тренде ?
0:14
Просмотров 1,6 млн