Тёмный

Kess v2.53 clone after Rework vs MPPS 18. Mazda 6 .ECU reading and writing 

YOYO Diagnostic
Подписаться 16 тыс.
Просмотров 22 тыс.
50% 1

In this Video I present 2 more Fake Products from China. One has done the Job only after an expensive investment in Parts and Chips, instead the other is far from working and we must keep in mind that the Car is 15 years Old. What I show you is that they are unstable and can create problems in use.
We often pay without knowing what we are receiving, but we have to ask ourselves why it costs so little compared to the Original ones!
Use them only at your own Risk.
In diesem Video präsentiere ich 2 weitere gefälschte Produkte aus China. Einer hat den Job erst nach einer teuren Investition in Teile und Chips erledigt, stattdessen ist der andere weit davon entfernt zu funktionieren und wir müssen bedenken, dass das Auto 15 Jahre alt ist. Was ich Ihnen zeige, ist, dass sie instabil sind und Probleme bei der Verwendung verursachen können.
Wir zahlen oft, ohne zu wissen, was wir erhalten, aber wir müssen uns fragen, warum es im Vergleich zu den Originalen so wenig kostet !
Verwenden Sie sie nur auf eigenes Risiko

Опубликовано:

 

8 апр 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 81   
@TemporallyHandle
@TemporallyHandle 2 года назад
Keep the videos coming. I'm learning a lot 👍
@YOYODiagnostic
@YOYODiagnostic 2 года назад
👍
@reza524
@reza524 2 года назад
Hello. I have a question. I have a Peugeot 207 1.4 8v Flex, with ECU Bosch 7.4.9. I have it's map file and now after remapping it's file with a professional guy, want to know that MPPS can write this Remap file on my ecu with OBD2? Thanks
@bestwreckauto1158
@bestwreckauto1158 8 месяцев назад
Thanks for a great video. I have KESS V2 EU clone with firmware version 5.017. Do i need to rework this device?
@ploughable
@ploughable 6 месяцев назад
Are you doing the re-maping by yourself or are you using some website that you pay per modified ECU map file? As OBD adapter I only have the Tactrix OpenPort 2.0 for PCMFlash. I believe I need a Kess clone for this software, correct? Mersi mult :)
@YOYODiagnostic
@YOYODiagnostic 6 месяцев назад
tunings are customized and made with Winols Software. I do not agree with ready-made software bought from other sites. I do not recommend this and do not use such a thing. Regarding your question, you need Kess to use that software, but I don't recommend buying that clone because it's very old.
@TheMateusz535
@TheMateusz535 Год назад
Hello, do you know what's the difference between Full and data only option? If I read file with option Full, then I can write changes later with option data only, or I need to use full option again?
@YOYODiagnostic
@YOYODiagnostic Год назад
Hello. It is preferable that the method used and the programmer be the same when writing and when reading
@spring6meow
@spring6meow Год назад
Tried reading my EDV16 Mercedes with a MPPS v18 and v21 and while reading it looses comms with the ecu after a minute or two. Already ordered a Kess v2 and hoping for better results.
@YOYODiagnostic
@YOYODiagnostic Год назад
Make rework on this Clones.
@SuperAntibobos
@SuperAntibobos 3 года назад
You recomend use ksuite 2.53 or 2.70 from kess? Thank you.
@YOYODiagnostic
@YOYODiagnostic 3 года назад
because these are clones some versions work others do not. use the one that works for you, the protocols are the same for Kess. the idea is not to spend money on them to believe that version 2.70 or 2.80 has something extra compared to 2.53
@Lamelldiff
@Lamelldiff 2 года назад
Whats is better for bosch edc16c35? Bmw 530d. China kess or mpps? Only for this ecu.
@YOYODiagnostic
@YOYODiagnostic 2 года назад
Hello. H For this ECU is better Kess
@robertszczepek8004
@robertszczepek8004 Год назад
i made kess mazda 3 2.0 143 hp denso rf7x there was no problem. I am using version 2.23 kess
@AutomotiveSolutionTV
@AutomotiveSolutionTV Год назад
Salut , poti sa ma ajuti cu fisierul pentru SDcard , versiunea mea este KessV2 2.53
@stattack5855
@stattack5855 8 месяцев назад
how is ksuite 2.53 on windows 10? is it stable?
@sara78130
@sara78130 Год назад
Hi can I read with. Mpp18 wana delete one dtc
@giovannicavarretta9013
@giovannicavarretta9013 17 дней назад
Hello but for a fiat punto 1.2 8v to read and write a map what do you recommend kess v2 or MPPS?
@YOYODiagnostic
@YOYODiagnostic 15 дней назад
Hello. Tell my which ECU is instal on the car.
@giovannicavarretta9013
@giovannicavarretta9013 15 дней назад
IAW5AF.P4@@YOYODiagnostic
@corolla70
@corolla70 2 года назад
Dear Friend, what does it mean "switch on and off"? It means ignition switch? I have a clone kess and i have switched on and off but no difference. I saw "wake up error". My car kia sportage 2007 crdi
@YOYODiagnostic
@YOYODiagnostic 2 года назад
Hello. Yes, that's what I mean. If it doesn't work, try rewriting the card. I hope you've reworked this clone before you get to work. If so, that Protocol is not supported for OBD reading. Get him out of the Car and read him with Ktag
@corolla70
@corolla70 2 года назад
@@YOYODiagnostic Thank you so much Dear Friend. If it is possible, i have a question for you that i need simple answer. My car is Kia Sportage 2.0 CRDI, model year is 2007. It has got 83 kw and 110 hp. But I analyze my car information in internet that i saw this model year is 140 hp. I don’ know cars phsycal properties are same each other (turbo, cam shaft, etc). But i know two car compression ratio is different. I search and found my car’s 140 hp original ecu software in the forums. So if my KESS can run and if i restore my car 140 hp sportage original ecu software, is it suitable my car? Is my car run problemless? Have i need change anything in ecu software (immo, EGR settings, etc)?
@YOYODiagnostic
@YOYODiagnostic 2 года назад
@@corolla70 Hello. To replace one software with another you must have the following: 1. the same ECU number. 2.to write only flash Maps. 3. to make checksums correction. 4. to re-code the injectors because in the map on the internet are the numbers of the injectors on the car they come from. Most importantly back up the Flash and Eeprom
@corolla70
@corolla70 2 года назад
@@YOYODiagnostic Dear Friend, i don't understand exactly instruction number 4th. please more information. where can i find information about how can i re-code the injectors?
@YOYODiagnostic
@YOYODiagnostic 2 года назад
@@corolla70 It makes sense that if you copy the Software from another Car, the Injector codes will be stored from that car and not yours. The codes are written on each Injector (open the hood of the car and take a Picture or write them ). After writing the desired Software in the ECU you must have a Tester that can code the Injectors and code them. Don't forget to check the Engine operating position. At cylinder one you have to code the injector mounted on cylinder 1 and so on.
@norwindaveramirez6089
@norwindaveramirez6089 2 года назад
Nc info, Sir, You Proved that Kess Clone will worked in read and write ecu files
@YOYODiagnostic
@YOYODiagnostic 2 года назад
Thanks 👍
@fierakuitali9313
@fierakuitali9313 Год назад
What is better for Fiat bravo 2 2008
@YOYODiagnostic
@YOYODiagnostic Год назад
Galletto
@N63s
@N63s Год назад
does this work for bmw f10 550i N63 engine?
@YOYODiagnostic
@YOYODiagnostic Год назад
none of me can read ecu ecu of bmw f10
@Pitman556
@Pitman556 Год назад
What can flash simos 8.51 through obd?
@YOYODiagnostic
@YOYODiagnostic Год назад
Reading this ECU is quite difficult as many original programmers failed. CMD failed on this one, I think your options are Flex or Kess V3.
@Pitman556
@Pitman556 Год назад
@YOYO Diagnostic I hear trasdata or hptuner can aswell. On audi q5
@omerward9261
@omerward9261 Год назад
hi mate great video what tool can clone fiat 500 bsi and ECU
@YOYODiagnostic
@YOYODiagnostic Год назад
Hello, for ECU cloning you need a separate programmer from the one for BSI. If you use clone, Ktag is ok for ecu and for BSI CGpro or VVDI prog.
@frijus100
@frijus100 2 года назад
hi where you buy this kess v2 reworked?
@YOYODiagnostic
@YOYODiagnostic 2 года назад
Hello. You didn't pay much attention to the videos. Do you think I bought it or made it? I'm going to post a video this week on how to rework kess.
@jordanbroughton4820
@jordanbroughton4820 8 месяцев назад
Can any clones read anf write edc 16/17 through obd
@YOYODiagnostic
@YOYODiagnostic 8 месяцев назад
Depends on which ECU, as you know there are many edc17 that have tuning protection. Those must be read in Bench or BDM.
@mrl3524
@mrl3524 2 года назад
Do you sell kess v2 reworked ? Or would you ?
@YOYODiagnostic
@YOYODiagnostic 2 года назад
Hello. I have said before and I repeat that I do not sell products, if I do, I'll let you know. A video will follow where I rework Kess and Ktag. Be patient and you will be able to fix it yourself.
@madvelila
@madvelila Год назад
Does these work for flahing tuning file to edc17c46?
@YOYODiagnostic
@YOYODiagnostic Год назад
No
@ivannemet1324
@ivannemet1324 Год назад
@@YOYODiagnostic but in car list is golf vii with edc17c64. For this ecu is ok writing tuning file?
@YOYODiagnostic
@YOYODiagnostic Год назад
@@ivannemet1324 It's a big risk, to use Kess because I'm convinced you're using a clone. You can read this ECU but in Tricore. You can also use Kess if you have VR files, or if your clone has Firmware 4.036.
@ivannemet1324
@ivannemet1324 Год назад
@@YOYODiagnostic I have a clon but full rework done on it.. if I have a vr file do you think I can write the folder with kess?
@jannehusedcardealer2309
@jannehusedcardealer2309 Год назад
Hi mate can you clone swap ÉCU from the scrapyard With Kess?
@YOYODiagnostic
@YOYODiagnostic Год назад
Hello, kess clone is made for obd reading. which means you can only read Flash. To clone an ECU you also need Eeprom. This function is performed by Ktag. .
@jannehusedcardealer2309
@jannehusedcardealer2309 Год назад
@@YOYODiagnostic thanks very much for your response.
@YOYODiagnostic
@YOYODiagnostic Год назад
@@jannehusedcardealer2309 👍
@zvonem123
@zvonem123 25 дней назад
Does anyone have a solution to unlock ..cloning or remap ECU for mazda cx30 skyactiveD year 2020 ecu denso s805 18881, mb275700-9552, 12V KE124D MADE IN SPAIN...THANKS FOR ANY INFORMATION
@filipbalaz2053
@filipbalaz2053 2 года назад
Hello yoyo, are you going also to prepare video how to rework this KESS? or could i write you email, for helping me out how to solve this problem with KESS MAZDA 6 writing? thanks.
@YOYODiagnostic
@YOYODiagnostic 2 года назад
Hello. A video with Kess Rework will be out soon!
@filipbalaz2053
@filipbalaz2053 2 года назад
@@YOYODiagnostic and i have forwarded to your email Also question regarding kessm i ordered from China. Should i ask here?
@edgardanii8863
@edgardanii8863 2 года назад
Can kess clone all type of vehicles from ECU to TCM ?
@YOYODiagnostic
@YOYODiagnostic Год назад
Hello. Not even 50 percent of what's on the menu. A clone is a clone, don't confuse it with the original!
@diyautovlog6828
@diyautovlog6828 2 года назад
mpps 18v reflash mazda6 2005
@YOYODiagnostic
@YOYODiagnostic 2 года назад
Hello. No I will not work.
@diyautovlog6828
@diyautovlog6828 2 года назад
@@YOYODiagnostic what will work for mazda6 2005?
@YOYODiagnostic
@YOYODiagnostic 2 года назад
@@diyautovlog6828 Scanmatik + PCM Flash
@diyautovlog6828
@diyautovlog6828 2 года назад
@@YOYODiagnostic thanks but i was thinking about trying tactrix open 2.0
@robertszczepek8004
@robertszczepek8004 Год назад
when it comes to kess it's too much on / off
@evgeniyspynoff7482
@evgeniyspynoff7482 3 года назад
Battery level: 0.00 v 🤔
@YOYODiagnostic
@YOYODiagnostic 3 года назад
it was a error. for this reason care must be taken with these clones. you get worse things than that.
@evgeniyspynoff7482
@evgeniyspynoff7482 3 года назад
@@YOYODiagnostic I also use a clone. maybe it's the software itself?
@evgeniyspynoff7482
@evgeniyspynoff7482 3 года назад
P.S. I don't use mpps and openport yet. they are too unreliable
@YOYODiagnostic
@YOYODiagnostic 3 года назад
@@evgeniyspynoff7482 of course from the software was the error. it was the first and last time. imagine that you can make a fatal mistake when writing an ECU. that's why I don't recommend clones. and unfortunately they are getting worse, but many companies also exaggerate when they give prices of tens of thousands of euros for these programmers. but if you do something, you take responsibility
@evgeniyspynoff7482
@evgeniyspynoff7482 3 года назад
@@YOYODiagnostic i have clones k-tag galletto 54 piasini and bdm 100 in stock, they complement each other well
Далее
kess v2 wake up error
0:51
Просмотров 9 тыс.
когда мучает жажда // Eva mash
00:58
Просмотров 331 тыс.
Беда приходит внезапно 😂
00:25
Просмотров 238 тыс.
How to use K tag to read microprocessors and eeproms
13:54
Infiniti EX35 ECU location.
0:12
Просмотров 4,3 тыс.
EDC15 VAG bricked ECU MPPS V18 flash
8:04
Просмотров 1,8 тыс.
Restore ECU via OBD with KESS or MPPS
7:11
Просмотров 8 тыс.
Beginners kess
7:20
Просмотров 67 тыс.
когда мучает жажда // Eva mash
00:58
Просмотров 331 тыс.