Тёмный

Linksys PAP2T-NA VoIP Phone Adapter Instructions 

Kent Diego
Подписаться 12 тыс.
Просмотров 193 тыс.
50% 1

$0.99/month for phone service! No taxes or FCC fees. This adapter connects to house's analog phone line so all of my phones and FAX work. I show how to configure and sign up for voip.ms phone service. You can transfer over your present phone number or pick a new one from a list. This is actually cheaper than Magic Jack and ooma once you figure in the fees and taxes. I did not sign up for e911 so saved $1.49/mo on that! The Linksys PAP2T is a SIP protocol internet phone adapter (called ATA, Analog Telephone Adapter) and can work with many VoIP service providers to give cheap international and local US telephone calls anywhere in the world. I suggest you use port forwarding in your router for UDP range 5060-5061 (for SIP) and UDP range 16384-16482 (for RTP).
If you have a lot of phones plugged in adjust this:
Regional tab - FXS Port Power Limit = 5 for 5 phone ringer lets say.
Other VoIP well liked providers (ITP) are: Callcentric, Voicepulse, Vitelity, RingCentral, VoipDiscount, Callwave, Sipgate ect....
Cisco PAPT2 PAPT PAP2

Наука

Опубликовано:

 

15 авг 2014

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 73   
@biggyk87
@biggyk87 8 лет назад
Great video Kent. I now better understand thats all it takes to get a voip phone up and running. :)
@ravisekar8839
@ravisekar8839 8 лет назад
Thanks for your replay.yes i dit like that.thanks again
@kornygerm
@kornygerm 8 лет назад
does the router garantees a more stable connection? reception?
@BIMBOBOOP
@BIMBOBOOP 5 лет назад
Hi kent, can I make yousome questions? I wanna use one of these with an old videogame console that can play online trough phoneline callings. I have confirmed that the console works with voip nowdays, but it seems it another way to use it is possible too, with some changes in the configuration. So What want to explian you and ask if these both configuration will be compatible or I must change it each time I want to give it a different use.would you let me explain it to you better?
@northlinks6469
@northlinks6469 3 года назад
can i use two of these to use my analogue telephone over a wireless link without using a SIP account?
@parkour478
@parkour478 4 года назад
Thanks. Clear and complete instructions!
@wholeNwon
@wholeNwon 7 лет назад
Have had the same unit for many years. Completely trouble-free.
@wholeNwon
@wholeNwon 2 года назад
Still have it. No problems.
@d0tbr3w
@d0tbr3w 11 месяцев назад
​@@wholeNwonthank you for the update
@wholeNwon
@wholeNwon 11 месяцев назад
@@d0tbr3w Its power supply failed. Replaced it and the unit continues to function properly.
@bronbaderos
@bronbaderos 4 года назад
Hm nice. Clarifies some things a bit. I was figuring out the meaning of a GOIP gateway, ?FXO gateway?(a misleading word, it seems) and a VOIP gateway. Always favorite these tweaking things. Unless they don't operate because of some reason.
@ANTHONYBOOTH
@ANTHONYBOOTH 3 года назад
just seen it ... yours connects Two (analog) Phones to your system.... - I would try a few of these later (Dotted about the office and serving analog deskfones)... my SPA3000 is input + output...
@alexbaff7673
@alexbaff7673 8 лет назад
Good job!
@Suomion
@Suomion 8 лет назад
I have a question. How does that machine separate the two phones? Like I wanna setup a LAN voip system, which has few of those adapters and phones. I know you call to other phones by IP but how do you choose which phone you call in the adapter, when adapter is hooked by only one ethernet cable to the switch.
@KentDiego
@KentDiego 8 лет назад
+Antti Kannisto Each adapter or second line of same adapter would have a different SIP port number so they can all use the same LAN. On VOIP.MS site you create sub-accounts for each device or line. Each device will register with the VOIP.MS server. You can also have VoIP software running on a cell phone. Then you set up ring groups to have DID (phone number) to ring each adapter. You can have multiple adapter ring with same number and have multiple numbers ring same adapter.
@Suomion
@Suomion 8 лет назад
+Kent Diego Thanks for answering, already ordered my own piece. Quick question: Does it the linksys pap2t-na provide power to the phone? like it normally (most of I know) takes power and connection from a one cord
@KentDiego
@KentDiego 8 лет назад
+Antti Kannisto I have several phones and a FAX machine plugged in to the same line and they all ring and work. There is a setting for ring drive strength based on "Ringer Equivalence". Default is 4. The very old Ma Bell phones had mechanical ringers with a RE of 1. Newer phones have a lower RE value. The proper voltages are supplied to operate a phone without anything else needed.
@jjawads88
@jjawads88 9 лет назад
is the call between two voip device like Linksys PAP2T as you are showing in the video will be free are chargeable. thanks
@Tomajdafrytrix
@Tomajdafrytrix 7 лет назад
Depending on your phone company/sip provider. When you use for example sip2sip.info, you can call free
@kennethnicklowicz1030
@kennethnicklowicz1030 8 лет назад
This provider is EXPENSIVE.. no unlimited outgoing. Comparing to magicjack (the plus has came along way) why bother? I am thinking of getting a SIP for the 2 pap2 I have, but paying by the min for any landline is NUTS
@danlanre2179
@danlanre2179 5 лет назад
Thanks for your training video.. i have a Fixed Wireless Modem with a GSM sim containing my office front office known phone number... Now i have moved to another office space with all phones on Ip phone extension in the premises already installed just starting working.. but its a rented premises and i cant loss my office phone known phone number.. i tried using my FWN GSM device in the landlords PBX all port filled with the PSTN RJ11 port. Now i need to interface there IP Phone PBX line and still have my phone number working.. How can i do these with my GSm line still working and use there IP Phones boxes installed. I tried accessing or setting up SIP Account via there IP Phone box with interfacing my Analog line coming into there PBX but cant get it working... Please anybody with quick and easy clue? Or setup my own IP PBX seperate Using ATA SPA122 for the Analog line and ... How will i have the calls routing into the Ip Phones ? I need help any one.. Please...
@SMFJose
@SMFJose 4 года назад
Thanks for sharing
@nascarbeastc
@nascarbeastc 7 лет назад
hi i have the same setup for 2 years but suddenly 3 weeks ago, when people call I can't hear the caller but when I call its fine. Everything was fine until 3 weeks ago please help.
@KentDiego
@KentDiego 7 лет назад
Try using port forwarding in your router. I have: UDP port 5060 UDP ports 16000-17000 I set my PAPT2 to a static IP address (in video) to make port forwarding easier. Try taking PAPT2 to a friends house (different ISP and router) and see if works better there to troubleshoot where problems is.
@BrianThomas
@BrianThomas 3 года назад
Wow old but still useful. How do I connect my existing pots line? I still have an old pots line. What can I use to connect that?
@KentDiego
@KentDiego 3 года назад
Transfer your phone number to the VOIP provider. Cancel POTS service. Disconnect where POTS connects to house. Plug PAP2T into wall for your house's phone lines. Now all your phones and FAX machines will work like normal.
@pixel_xo
@pixel_xo 3 года назад
Is it possible to use this as a trunk to send the Analog phone signals to FreePBX ?
@june-gl6dy
@june-gl6dy 5 лет назад
I've a situation and I'm curious to know if it works. I use a gsm dongle and plug in to my wireless router (Using a Xiaomi 3 Router) via its usb port, then connect the wireless router to the VOIP by lan cable. Additionally, I've a dect phone which I'll connect to the VOIP by normal telephone line. The source of internet and phone line will be the sim card in the gsm dongle which i'll subscribe to a local service provider.
@KentDiego
@KentDiego 5 лет назад
Yes that should work. Internet is internet.
@june-gl6dy
@june-gl6dy 5 лет назад
@@KentDiegoAppreciated! Thanks very much!
@39rbadams
@39rbadams 7 лет назад
do i have to need phone line active i don't understand that part please i need your explanation thanks, for u kind
@KentDiego
@KentDiego 7 лет назад
The PAP2T connects to the internet LAN cable. You then plug a phone into the PAP2T. I have 5 phones and a FAX machine connected to PAP2T.
@rbadams21
@rbadams21 4 года назад
Kent Diego thank you for you kindly replay
@GreatKukuruzo
@GreatKukuruzo 8 лет назад
Hi, everyone. I need your help. I have WRT160NL Linksys with USB slot. I've created a shared folder and it has several folders in it. I need all of them to be in CAPITAL LETTERS, but Windows or Linksys changes letters to small all the time. CAPITALS-are the reason why some of my devices do not work in my network. How to make them big 4ever? Thank you
@KentDiego
@KentDiego 8 лет назад
+GreatKukuruzo i saw this: www.techsupportalert.com/content/how-force-your-windows-file-and-folder-names-have-case-you-want.htm
@GreatKukuruzo
@GreatKukuruzo 8 лет назад
Kent Diego Thank you, but I've seen it already. Used regedit method. Still folders change their names into the lower case. Any ideas?
@ravisekar8839
@ravisekar8839 8 лет назад
Hi.how i can reset the ip address on pap2t voip adapter.now my ip is 0.0.0.0 but when i entered. doesn't work.please if you can help me about that issue.please sent me the instruction.thanks
@KentDiego
@KentDiego 8 лет назад
+Sekar Ravi I Googles "Linksys PAP2T Reset" and this was first thing that showed up. To reset the PAP2T to factory defaults follow these steps: Plug in power adapter.Plug in a phone to 'Phone 1′ port of the PAP2T.Dial ****You should hear 'Configuration Option Menu'Dial 73738# (RESET#)Press 1 to confirm the reset.
@mandygiles5509
@mandygiles5509 8 лет назад
im getting 0.0.0.0 when i try to get my linksys voip box ip address please help i also tried to reset it still nothing
@KentDiego
@KentDiego 8 лет назад
+mandy giles Maybe you have bad LAN cable or port? Try different cable and port. You should see LED's light up on both ends when you plug this in. I noticed it can only support 10 mbps connection. Maybe your HUB/switch can only support 100/1000 mbps? The very first network HUBs could not auto switch so you had to use crossover cable. en.wikipedia.org/wiki/Ethernet_crossover_cable Most cables are straight patch cables, not cross over. If that does not work you need new PAP2T.
@Breikki
@Breikki 8 лет назад
Hello, i have same as you have. I got some problem with that, and I don´t know what I should change and what not. It works before very good but now, when I make phone calls, example to my cell phone, it´s ringing but I don´t hear any voice after when I have typing numbers, waiting voice. What I should to do? Please if some one knows let me know too :). Thank you!!
@KentDiego
@KentDiego 8 лет назад
+Juha Breilin I had a problem with no audio too. I think re-powering adapter and router fixed it. The VOIP.ms support suggested forwarding range UDP 10000-20000 to adapter.
@Breikki
@Breikki 8 лет назад
+Kent Diego Hi, thanks for your reply but sad to say thats not helping in this time. Instead I looking from internet and I found one answer what someone else was asking 2 years ago I try it.... and TADAA!! It´s working!! :D. I would like to share it to here if someone haves same problem sometimes. supportforums.cisco.com/discussion/12037511/linksys-pap2-no-sound-problem Have a happy talking with Internet Phone adapter :)
@waqaspk786
@waqaspk786 Год назад
Dear Community. Please confirm that if Linksys PAP2 or LinkSys SPA 3102 support to Callcentric 2nd Part. There is other model Linksys SPA3102 , what is difference in this model and the one in this video as Linksys Pap2. These Two devices looks same in video.
@markspencepancho8696
@markspencepancho8696 7 лет назад
My Linksys PAP2T-NA VoIP Phone Adapter is working fine and suddenly it's not working.I my brother in law and sisters in law's is working fine, but mine hasn't been working for 2 days and the lights are blinking on and off. I am with rogers but my in-laws are with other providers. What could be wrong?
@KentDiego
@KentDiego 7 лет назад
Guess it broke. Look in the management settings with a web browser to see if you can get any clues. These are cheap counterfeit items so not surprising for it to break. Buy a new one.
@gkoleey3592
@gkoleey3592 4 года назад
Whay using google DNS server?
@melindaburnside7189
@melindaburnside7189 3 года назад
👍 GOOD JOB
@nikkeemehta7228
@nikkeemehta7228 3 года назад
I have Linksys broadband router with 2phone ports how to used I don't know help mee sir I am from nepal
@marilynreno7510
@marilynreno7510 2 года назад
I have exact same and here looking for the same answer. Did you figure this out?
@mike212916
@mike212916 4 года назад
if I have a SIP voip phone will i need this?
@axxoaxx288
@axxoaxx288 3 года назад
Nope
@lightwarrior6489
@lightwarrior6489 6 лет назад
Can 2nd line be activated ?
@KentDiego
@KentDiego 6 лет назад
Yes. Just like the first one.
@kapembwa
@kapembwa 4 года назад
Hello, is it possible to connect two PAP2Ts to LAN to LAN, it means interconnecting two analog telephones via an ethernet cable.
@KentDiego
@KentDiego 4 года назад
You can have two but each one hooks to LAN like any other LAN device. You have to configure each one to a different SIP port. Just one PAP2T can run all the phones in your house. I also have a VoIP phone connected to LAN.
@s60570
@s60570 4 года назад
i have problem
@matthewallen5452
@matthewallen5452 4 года назад
does this work with google voice?
@chodge8366
@chodge8366 3 года назад
yes
@marilynreno7510
@marilynreno7510 2 года назад
@@chodge8366 how?
@anterbnshdad1327
@anterbnshdad1327 8 лет назад
help this devais is good
@ANTHONYBOOTH
@ANTHONYBOOTH 3 года назад
when I first saw these units I thought they were DIAL UP MODEMS....
@ANTHONYBOOTH
@ANTHONYBOOTH 3 года назад
why are so many people setting these up on a class c network ...I put mine on my class b 172.16.16.0 / 20 subnet + have created a 4 digit system and am worried about IP - I only have 2000 IP addresses and a 10,000 line capacity.... WOOOOPS ...oh, looks like a PAP2T-NA is really a SPA3000
@datlaunchystark1385
@datlaunchystark1385 4 года назад
Just wanting to post. For those looking for firmware for the PAP2T, here's a working link for 5.1.6 as of 2019 just in case the Cisco download site is giving you errors like "The download process was interrupted". Cisco, I like your products, but hate your download site... :-/ downloads.linksys.com/downloads/firmware/PAP2T_v5.1.6_fw,0.zip
@jasonzhang7528
@jasonzhang7528 7 лет назад
For Linksys machine:www.aliexpress.com/store/334059?spm=2114.10010108.0.0.dqlX0z
@vivianshi4966
@vivianshi4966 6 лет назад
please check our website : lcbtech.en.alibaba.com/ for your refference
@tesservices3058
@tesservices3058 6 лет назад
version française svp
@estusflask982
@estusflask982 4 года назад
Why do you spend most of the video talking about a static IP address. That's not necessary at all to get it working.
@user-kh1ls8tm3n
@user-kh1ls8tm3n 7 лет назад
чё за фигня?
Далее
Voice over Internet (VoIP)
9:33
Просмотров 72 тыс.
How to factory reset a Cisco Linksys PAP2T VoIP ATA
3:10
Украшаю чехлы 🎀
00:51
Просмотров 228 тыс.
How to configure your Linksys VoIP adaptor?
2:59
Просмотров 38 тыс.
Como configurar un spa3102
5:45
Просмотров 31 тыс.
COMO CONFIGURAR ATA FXS LINKSYS PAP2T
8:09
Просмотров 9 тыс.
Analog, Digital, & VoIP phones
7:48
Просмотров 165 тыс.
Aura 879dsp новинка и хит
0:48
Просмотров 168 тыс.
Samsung laughing on iPhone #techbyakram
0:12
Просмотров 687 тыс.