Making an Old Fashioned Door Bell from Silver Coins 

This is a great concept for an Easter egg too! The hinge would be a little hard to pull off but I know you can do it! Basically the same design as the bell but with a rounded cap at the end. You could use it for the big prize at hunts. Not necessarily to win the egg but if you turn it in then you get a “table” prize. Thought I’d share!

I would still like to see silver coin cufflinks, that would be pretty cool

I recently bought the tooling to produce quarter bells from Legacy Brand and have thoroughly enjoyed making my first few bells! After the first one, and realizing that when I drilled the hole after doming that it wasn’t centered, I started drilling the hole after the original anneal, but before doming. Using a center finder, I can hit it spot on and drill it on my drill press! I’ve had no problems doming the tops when they’re predrilled in this manner! Thanks for a great video!

I just love your craftsmanship! thanks for sharing!

I’m trying to fill my Monster Box and you’re just punching holes in perfectly good ASE’s 😭. Seriously though, this is really cool. Thanks for sharing!

Beautiful bell.

I agree with you about the silvers being outside but it is what it is ! How about trying with something cheaper like common quarters ! Lol. I thought about doming one and making the rest on my lathe out of brass or bronze or even aluminum might look nice with a pattern on it !

I can see salt/pepper shakers and a hollow ball bell with a silver striker inside.

That is absolutely amazing! Keep it up Skyler!

Wow that turned out surprisingly well! Nice one

Fantastic doorbell, and pretty nice tool also🤗😄 Whish I could afford some of Jasons tools 😩 Why don't you hang it inside, above the door, and fix it so every time the door opens or closes the bell chime's. Like every shop had in the old days 😁 that way you will probably keep it goes a long time 😄🐾🇩🇰

Beautiful!

You aré the Best my brother Grettings from México Querétaro

Another cool project.

Really nice idea and work. Looks and sounds great. Thank you for sharing. 👍

I have missed the videos!! The bell looks great, the bell tool you have there look great, nice to see tools evolve

Christmas tree 🎄 bells ~ from song: “Silver Bells”!!

Good job. bom trabalho BRASIL, I LOVE YUOR JOB

great idea

Looking good

Make a cheap one for outside and take that one and hang it inside above the door when it opens the door hits the bell and ring it

Really nice. I made one with 3 quarters, turned out quite dorky looking.. but I think I'll revisit it. I liked the way the bottom was shaped inward. Unfortunately I flared mine out and it doesn't look right. Peace

You know you could put a cord outside with a fancy handle that your visitors can pull...which rings the bell inside the shop. Just a thought. 2 years late. :D

look good as car gear knob

Very cool man. Looks very old fashioned like. Hope you are doing good man. Dont know why I missed this video but I saw it today 😁👍

so cute a door bell🤣👍👍🥰

Skyler, the bell is beautiful, love it. I was wondering if you could design a essential oil diffuser that could be worn on a chain? I’ve been looking at them and most look cheap. Something designed by you would be amazing.

Sweet little bell. I know it's been about a year since you made it. First, do you still have it? second, did you modify the setup in any way? I ask the second question because the twine you use will have a dampening effect on the ringing. Wire, chain, or fishing line would be way better for the sound. Keeping the bell inside is not too hard to set up. Because commercial doors swing to the exit of a building, you can rig up an arm extension on the inside of the door that will catch the weight that hangs off of the clacker when the door opens and closes, while at the same time, does not interfere with the operation of the door. A light, plastic arm of some sort, could be adhered on so you don't do any damage to the door. Interesting a beautiful work you do. I subbed to hopefully see more. All the best from Alberta, Canada.

Awsome work as always. What is next to try a bracelet for the wrist from coins.

Dude!!!! That’s really nice. Best channel in this genre on RU-vid!! Going off one of the other commenters. I could totally see a Faberge type egg. With all the stone setting you have been doing. Could be really spectacular!

Love the videos, but I have a question about heating up the coins. I don't have the ability to really use a propane torch either inside or outside of where I live. Do you have an recommendations as one can heat up a coin without using one? Thanks!

Could have done a cat type bell 2 half domes with a coin inside ..

In my head it was going to be hit by the door when you open close it, I tried to figure out how you going to do that with this design 🙂

What about using the one that started to split and make a miniature Liberty Bell. Always enjoy watching you make usable things that look awesome!!

Hello, if the coin is not silver, may be is just acopper nickel how to clean the welding marks ？use pickling the thing turns black so Is there a good pickling formula？

nice weekend

Your crack could be a mini Liberty Bell😀

Imagine living in Chicago that thing would get ripped off within the day

Should have hung it inside over the door so when it opens. The only other thing you could have done is used a better thread and used some fancy knots.

Do ya think ya could make a thimble out of a quarter or half dollar

Well, there's a camera so you can see when it walks off! Cool project! Be safe . Beach, NC

Could you list the products you used? What the name of the pickle is, what the name of the liver of sulfur is and what kind of solder did you use? Thanks

We live in the same town lol..

I have a question. Why are you quenching the copper ? Im not saying anything is wrong by any means im just curious. Would it not be softer if you let it cool naturally ? Or does it not matter with copper? Awesome project btw it looks great!

Heavy fishing line is nicer, using swivel with or without hook.

Hey man, when is your next coin ring competition?

Nice job.Next project a silver coin egg :)

bikers would love thay

I'm just curious, why do you hand punch the coins instead of using the press?

Jason works website not pulling up 😞

❤❤❤❤❤❤❤❤❤❤🎉❤❤❤❤❤❤❤❤❤❤

Wind chimes

I enjoy your channel and the value that it has given to my experience of investing in precious metals. In case you haven't collaborated with them yet, I would suggest trying to collaborate with Yankee Stacking, BigstackD, MooseScrapper, SalivateMetal, Spegtacular, or International Stacker. I consider this channel a best kept secret of mine, however I know it is wrong to keep this content from the masses. Keep up the good work, even if you end up not doing it I will continue to support your channel! Stay well and God bless you!

Question: Is it still on the porch or has someone stole it by now? Just curious.

Anda sekilas mirip mendiang paul walker...

I really love the process!! Just started collecting and vids like this make me wanna put holes in all my coins lol thank you!!

Suggestion: Hang it hire, above 6' 3" and extend the cable down to the bell (make it longer). What ya got there is a personal injury law suit just begging for a jury !!

Why did you switch from XL gel to Grobet?

Great project. Thank you man👍

9:47 that's what she said 😂

The part should be smaller and more in side then outside

I need one ☝️

canu make a silver sniffer

Different, I’m not wild about using actual coins for the bell, but 2020 was a shit storm… what would a bell like that cost?

You know someone would steal those and get the money at a gold/silver exchange.

I would say wind chime not a door bell.

Most don't know anything about silver,it be fine.

Please tell me the name of your drilling machine?

Cool video, but over 10 commercials. I understand monetizing videos, but, dang!

Where is your shop... address please 😂😂

This is just waiting to be stolen off of their porch. I would definitely leave this inside, some people know valuable things when they see them, and will take them if given the opportunity

In my continuing effort to drive you insane with questions, I present this: In most of the jewelry making YT videos, they use a pickle solution that’s heated in a mini crock pot, and most of them mention the noxious vapors produced by that method. In your videos, I see you using a solution in a glass cup or Mason jar, and not heated. What are you using, and is it less of a health risk than the heated crock pot concoction? This is a subject that I don’t see covered on the coin ring channels, but I’m very interested in getting some facts on the options and efficacy of each. And who better to look to for knowledge than you! Help???

Isn’t the federal offense, defaced money and alternate?

I'm just waiting for the day that Jason stops working and becomes lazy