Mercedes OM606 Rear Bowl Sump 

So professional in every way. Sometimes I get bored of interesting subject because of the way it's presented. This video was straight to the point no bull....

Really nice seeing that old USA iron in your shop. Excellent.

Absolutely love your guys work. Here in Canada its tough to find a good condition OM606. I hope to soon find a gem somewhere for a "shop truck build". Keep up the great work boys!

Today i watched the american youtube channel the channel of the video was like 2jz diesel 6k rpm and i heard your name and right away clicked on and saw the wonderfull world of this engine!! Well done guys keep us entertained with these videos Happy new year!

cant wait to see more about the 8.5mm pumps!

Will you guys be trying compound turbo setups? :D

Great explanation and fitting instructions. 👍🏽😎

I like your engine swaps keep up the good work I keep on going

Love this im more familiar with 617 but i loved the video. Great instruction too.

I'm planning on doing this exact setup (with maybe a few more add-on niceties) in a 1970's Chevrolet C-10 truck.

Love the videos, really can't wait to make my om606:) just have to find one in Canada🍁

My mother is from england. I was born here in the states. I found my odd ball swap! Cheve powered om606!

Just spent a lot of today watching your excellent videos. Bit of a trip down memory lane, in so far as the "old school" technology.... I started my working life as a hgv apprentice mechanic in 1978....engines were quite a bit bigger but essentially the same as the OM606, albeit OHV. As a matter of interest will a 606 work with my 2007 Sprinter 315cdi campervan?

The billet Manifold in action will be very interesting.

Yes just the video I wanted to see

Please release a kit like this for the om617a!!! lots of engine conversions running modified oil pans due to the front sump setup, I think there's still a market for it.

You want a great tip for easy gasket alignment, tiny zip ties 4 corners and one in the middle, start you bolts in the remaining holes so they’re just in the hole and not clamping and cut the zip ties off and pull them out, make sure you can get to the zip tie once it’s in position, sometimes on water pumps that can be tricky and you have to zip tie different holes

Do you guys do engine package deals?

21:47, yep the first THING in my garage, a ruler! Ha-ha, I love the 47-54 Chevy/GMC trucks, 55-59 also 64-66 also, well 67- well I like all Chevy GMC trucks ha-ha, I even have a 50, 55, 57, 58, 59, and 68GMC and a57 Holmes tow truck, I'd like to get into diesel with one of these engines, and a couple turbos!!

this answered a question I made on another vid of yours

was the rear main seal ptfe or rubber? the first one isn't supposed to be greased

how do you prime your 606 before startup? I have the rear sump setup and I have turned it over for a few minutes but I haven't built oil pressure yet. I have heard that the oil pumps aren't set up for "suck" they are more "push" pumps.

Is the heat marks on that crank from hardening or bearing issue?

Hmm ...does it come default with no strainer or filter on the oil pickup ?

Could you do a video of different ways to install a oil pressure gauge and maybe a exhaust pressure gauge please ?

Hey! To get the same effect on om605 do I need to use a Bowl Sump from om647?

Is it ok to delete the throttle butterfly on these engines because I did this to my TOYOTA estima 2.2 td and it made so much difference.

Are those pan come from the OM648? Can you use the original oil pump and modified the pipe?

How much power can the stock automatic gearbox from the e300td handle ?

do you have any experience with 4-matic gearbox. how much power can it hold. (300td 1989 om603)

Your work is neat and professional Because of you, I thought I'd modify an om606 engine How much does it all cost me? Fuel injection pump, turbo and everything .....ext pleas

Hi i just want to ask do I need any ECU to swaping om606 in 190E ? I mean for crankshaft sensor and other sensors too ? And ignition switch? Tnx plz answer

Any chance someone can share the PN for that torque converter opening cap/cover? I can't find it on a parts diagram, but it looks like Luke has it here (it's the part in the packaging). (checked the DPUK website but couldn't find it on there either)

what engine are the oil sump with the rear sump from? beware, OM603/606 are equal lenght oilpump chain, mb320 as some use i think oil sump from, is one link shorter\longer i think. dont remember exactly though :)

Cant seem to find the rear sump kit on your site

I know the 2jz's have siamese cylinder bores do these have siamese bores as well? Not hating, just really curious if that's one of the secrets to this engines strength

for your gaskets always use HYLAMAR . That's what RR uses for their head gaskets

would now be a good time to tell you, you missed doing the final 90* pull on the second main cap? seriously now, I've heard the rear sump has slightly different transmission bolt hole location. So does your adapter plate been drilled accordingly?

i want to know how much cost engine like that

Does this setup work for M104.991 engine?

Does this work in a W124, and is there a benefit? I would imagine under heavy acceleration a rear dump is preferable.

I see the Loctite coppers gave you a thumb down already. 🤣🤣

So what is going to happen with the charger?

why are these and 6bts impossible to find in Australia

There is one for om605 engine?

which oil pump is it ? whats it out of

Есть ли разница в давлении масла родного насоса и насоса от om648?

no screen on the pick up tube?

I have om602, 250d stock engine with 90hp and 10valves. Is it possible to make my engine to have 200-250hp with turbo and some light modification? I know as example for om606 super turbo 500hp we need big turbo, big intercooler, oilcooler, massive boshpump and fuelpump and remap ofc. But I dont look for that, I am looking for "minimal & neccessery" modifications to upgrade my om602 to 200hp, and to have normal consumption when I drive normal hahaha. Any suggustions? Thank You!😁🔥

Can this sump kit be used on a OM603 turbo diesel?

How is the Chevy 3100 pickup coming along ???

Can an OM606 be swapped in to a AMG W204 ?

Hey Luke, are you selling these kits again anytime soon?

What’s the best oil for this engine Guys?

Приветствую вас! Удачи вам! Процветания канала!

Why would you want to not find a way to keep the windage tray?

kolik litrů oleje je obsaženo v této koupeli minimum a maximum díky za odpověď

Is this sump also needed for a Mercedes G wagon conversion?

when w140 superturbo diesel?

I'd love to put one in a LS400 Lexus, but to do it for refinement and economy, not for black smoke and loud power and speed off the mark.

Om613 sump?

Are the main cap bolts reusable in these engines?

сколько литров масла входит в ету ванну минимум и максимум спасибо за ответ

I wait for the running car with 600 hp videos

is this kit still available?

Luke is it worth having the rear most sump bolts with a larger diametre shoulder to locate the sump. Or does each sump differ greatly

Was there different generations of this engine it looks way bigger than I remember unless that's a small man

Shouldn't you have replaced the bolts since they're torque to yield?

I want one in a 740 iL!

😎👍

umm i thought the main cap stretch bolts should have been replaced and not re-used

Why do you hate the M57? it is just as strong, as the om606

this sumps are from w210 om613 or w211 om648 diesels

I am working on a 80 Chevy truck and want to do the om606 in it.. just saving up for parts...

90 degrees would be for a new bolt.

680 hp? What would you need to do to the engine to make 600 hp?

How much oil in litres?

Start it up !!!!!! Start it up !!!!!!! LOL

I think that would fit a P38 range rover

That Chevy's going to be bad to the bone !

I want a om606 in my defender or a cummins

Can buy it from you!!

anyone know some tricks to get an unprimed oil pump to suck oil ?

'Billet Manifold'.......? As in 'THE' Billet Manifold.....B-P

Hello sir. I am from Bangladesh. I am a fuel pump mechanic. I want you to work here

No loctite left! 😮use nail polish 🤠🙏

GMC Chevrolet it's the same thing

2jz DIESEL