MK3 Ford Focus front wheel bearing replacement

Подписаться 56 тыс.

Просмотров 20 тыс.

50% 1

Step by step guide on how to replace the front wheel bearing on a 2016 MK3 Ford Focus ST. Ive also replaced the rear wheel bearing which you can find the guide for on the channel.
New Wheel bearing Ebay - ebay.us/cailKn
ABS sensor - ebay.us/B0J9ws
Tools used :
Milwaukee 12v 3/8 Impact driver - ebay.us/Pg8ilg
Milwaukee 18v 1/2" Impact driver - ebay.us/h7mI4N
Draper socket set - amzn.to/2FdUEjf
Screwdriver set - amzn.to/30RA53L
WD40 - amzn.to/3oiaIRE
Snap on Pliers set - ebay.us/suhaXX
Wire brush - ebay.us/E00HlO
Digital torque wrench 3/8 - amzn.to/2PP9vpP
Manual torque wrench 3/8 - amzn.to/33eZsxj
1/2" Torque wrench - amzn.to/2VZ4CKu
Hammer - amzn.to/2PAoD9V
Suspension arm bar - ebay.us/hbZkJS
Long reach 3/8 ratchet - amzn.to/3iJsADg
20 ton press - ebay.us/QY72Tm
Sykes insertion press tool / tube - ebay.us/QvPwyC
Circlip pliers set - ebay.us/FyfWcn
Milwaukee 18v Angle grinder - ebay.us/QoVWRp
Safety glasses - ebay.us/VDiQ2w
Copper hammer - ebay.us/fsvPHQ
Punch and chisel set - ebay.us/q39kTS
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Check GSF Car parts - tidd.ly/34pZe7o (use discount codes on site)
Torque settings :
Upper pinch bolts = stage 1 - 80NM, stage 2 - 180 degrees
Lower pinch bolt = 83NM
Hub nut = stage 1 - 80NM, stage 2 - 90 degrees
Track rod end = 48NM
Caliper carrier bolts = 175NM
Wheel nuts = 135NM
Check out the video for the replacement of the rear wheel bearing - • MK3 Ford Focus rear wh...
Check out the diagnostic machine I use - diydaly.co.uk/products/phoeni...
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Useful links:
Car Analytics - Vehicle information checker - tidd.ly/3B2PEbx
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. ru-vid.com?...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay!

Авто/Мото

Опубликовано:

9 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@diydaly Год назад

New Wheel bearing Ebay - ebay.us/cailKn ABS sensor - ebay.us/B0J9ws Tools used : Milwaukee 12v 3/8 Impact driver - ebay.us/Pg8ilg Milwaukee 18v 1/2" Impact driver - ebay.us/h7mI4N Draper socket set - amzn.to/2FdUEjf Screwdriver set - amzn.to/30RA53L WD40 - amzn.to/3oiaIRE Snap on Pliers set - ebay.us/suhaXX Wire brush - ebay.us/E00HlO Digital torque wrench 3/8 - amzn.to/2PP9vpP Manual torque wrench 3/8 - amzn.to/33eZsxj 1/2" Torque wrench - amzn.to/2VZ4CKu Hammer - amzn.to/2PAoD9V Suspension arm bar - ebay.us/hbZkJS Long reach 3/8 ratchet - amzn.to/3iJsADg 20 ton press - ebay.us/QY72Tm Sykes insertion press tool / tube - ebay.us/QvPwyC Circlip pliers set - ebay.us/FyfWcn Milwaukee 18v Angle grinder - ebay.us/QoVWRp Safety glasses - ebay.us/VDiQ2w Copper hammer - ebay.us/fsvPHQ Punch and chisel set - ebay.us/q39kTS Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site) Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site) Check GSF Car parts - tidd.ly/34pZe7o (use discount codes on site) Torque settings : Upper pinch bolts = stage 1 - 80NM, stage 2 - 180 degrees Lower pinch bolt = 83NM Hub nut = stage 1 - 80NM, stage 2 - 90 degrees Track rod end = 48NM Caliper carrier bolts = 175NM Wheel nuts = 135NM Check out the video for the replacement of the rear wheel bearing - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qHtx5WgAKbE.html

@TheDervMan Год назад

Some 'top tips' in there, you make it look so easy.

@diydaly Год назад

Thanks 👍 makes life abit easier having the right tools

@HugeVictor Год назад

Really appreciate the mk7 golf wheel bearings after watching this😮 Lots of work on the ford by comparison!

@diydaly Год назад

👍👍

@ANDY-we7mr Год назад

Cracking job there very well explained thanks 😅

@diydaly Год назад

👍👍 thanks

@cameronmoffat1525 4 месяца назад

Excellent video as ever. Thank you.

@diydaly 4 месяца назад

👍👍 thanks

@MrZimmaframe Год назад

16:48 i dunno if you have an air tool or dremel but the little dremel wire wheels are really good for getting into the crevice where the clip goes in. Great in depth video as always.

@diydaly Год назад

Thanks mate 👍👍👌

@livingsoul.4105 Год назад

Very informative professional video .Thanks

@diydaly Год назад

Thanks for the comment 👍👍

@castrolgtx5064 Год назад

Great job 👏 if that was a Kia or Hyundai that Abs sensor would never have come out.

@diydaly Год назад

👍 haha yeah your right there!

@lovepreetsinghhanjra1997 Год назад

Good job sir 👍👌

@diydaly Год назад

Thanks 👍

@kristalydaniel3113 7 месяцев назад

Thanks for the video, do i torque the wheel bolt with the tire up 80 Nm then 180% with the tire down? Thanks

@DUKEisALIVE Месяц назад

Thanks for the video! Do you think it would be possible to replace the wheel studs without taking it all apart or is there no room to push them trough?

@exowinaanm6400 Год назад

after disconnecting the abs plug or the steering sensor, you will not need to accept them again with the program?

@toyotoe3732 Год назад

Thanks for the video and the links. That chisel you used to tap off the bearing inner race from the hub, appreciate if you could provide a link for a good quality chisel set. Cheers.

@diydaly Год назад

Hi I’ve edited the description and added a midrange quality one in , they are a decent set for the price , all chisels take a beatin so I do really spend mega bucks on them , I’ve had snapon ones before that are just as soft as the cheaper ones , if you do want to go all out I’d recommend these .. ebay.us/wVvcX4