No video :(

MK6 GTI with Boss 500 turbo kit hits the dyno

Подписаться 38 тыс.

Просмотров 15 тыс.

50% 1

Installing and tuning a CTS Turbo Boss 500 kit on this MK6 GTI TSI. This big turbo 2.0T TSI was tuned with Malone / Tunezilla software with great results on 91oct. I suspect we'll see this car back on the channel to maximize the turbo's capabilities with some additional upgrades.
Support the channel on Patreon - / comotorsports
Support the channel with CO Merch
CO Motorsports Holographic Sticker 2 Pack - comotorsports....
CO Motorsports Pullover Hoodie - comotorsports....
CO Motorsports Zip-Up Hoodie - comotorsports....
CO Motorsports Shirt - comotorsports....
CO Motorsports Snap Back Hat - comotorsports....
CO Motorsports Beanie - comotorsports....
Tools we use.
Orange Nitrile Gloves
amzn.to/3wFWK2w
Bolt Extractor Set, Easy-Out Screw Extraction
amzn.to/3HvKtE4
Inspection Camera 7” 1080p
amzn.to/3R8PSnL
3M Safety Glasses
amzn.to/3Y1vQ0R
Grinding discs
amzn.to/3H6HzUU
Lincoln Welding Gloves
amzn.to/404S8jQ
TITAN 16138 9-Piece Low Profile Impact Triple Square Bit Socket Set
amzn.to/3XVRIuj
Digital Timing Light
amzn.to/3JkxJBL
Swivel Magnetic Spark Plug Socket
amzn.to/3JbZ4FV
GEARWRENCH 20 Pc. Screwdriver Set
amzn.to/3WDXlMR
Camera Gear
Sony Alpha ZV-E10
amzn.to/3DbAi52
Rode Compact On-Camera Microphone
amzn.to/3kCVudP
67'' Phone Tripod Stand & Selfie
amzn.to/3kxLSks
Audio Video Capture Cards Cam Link Card HDMI
amzn.to/3XOnJoe
Dummy Battery DC Coupler Kit for Sony Alpha A5000 A5100 A6000 A6100 A6300 A6400 A6500
amzn.to/400wyNE
20FT USB-C to USB-C Cable
amzn.to/3inpU2U
25ft HDMI to Micro HDMI
amzn.to/3wvcMwk
Camera Tripod, Mini Flexible Tripod Stand
amzn.to/3H6orXi
Milling
Carbide End Mill 2 Flute Square End Standard 1/4" Diameter x 3/4"
amzn.to/3WDJsy0
Accusize Industrial Tools 1/8'' Thickness 10 Pairs Precision Parallel Sets
amzn.to/3WBUrYL
Precision 123 Blocks, Two Pack
amzn.to/3XEQuUB
Deep Black Apron
amzn.to/3j8Ochx
Accusize Industrial Tools 2-1/2'' Cutting Diameter R8 Shank Indexable End Mill
amzn.to/3XT2KAE
Lathe Turning Tools, Boring Bar Turning Tool Holder with 10pcs CCMT09T304 Inserts
amzn.to/3kCPfql
Tap Magic Cutting Fluid
amzn.to/3HtG6cC
Carbide roughing End Mills, HRC45 Tialn Coated
amzn.to/3Del3Z4
Hold Down Clamp Clamping Set Kit Mill
amzn.to/3XV3vch
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyL...
Music promoted by Audio Library • Finally - Loxbeats (No...
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyL...
Music promoted by Audio Library • Finally - Loxbeats (No...

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 157

@COMotorsports 11 месяцев назад

Miss you guys, we're playing catch up. More content coming this week.

@CliffB5A4 11 месяцев назад

I've been wondering how the drag car is coming along, can't wait for a new video of it.

@MeltingRubberZ28 11 месяцев назад

Absolutely! We want to see the drag car make 1050

@caveone-365 11 месяцев назад

@@CliffB5A4Agreed. Same here bro! Track cars/ builds are my personal favorite as I do similar work myself but mostly on E30/ 36/ 46 chassis cars. I still will always have a soft spot for VW/ Audi as I was very much into building and running them before I was bitten by the Bimmer bug 😁

@CliffB5A4 11 месяцев назад

@@caveone-365 yeah I love seeing people max out cars for drag racing. 🖤

@caveone-365 11 месяцев назад

@@CliffB5A4 Definitely a hell of a lot of fun no doubt!! There are certain series/ classes that let new people that are interested in getting into racing compete for a lot less money than most normal racing bodies, plus with something like the SPEC series, it's very even and with similar cars/ legal mods. It boils down to having the majority of success from the teams "driver mod." 🙂

@zuluagaco 11 месяцев назад

wish we could see the owners reaction on their first drive :)

@youtubejunkie8053 11 месяцев назад

Nice!! I have the k04x from CTS with 360whp on stock fueling. My buddy is running this kit with Meth, bigger injectors, and upgraded hpfp/lpfp and seeing 490whp. Clutches slipping on the DSG but once he increases clamping pressure he’ll he ripping 50-160

@abdallahalassaf8084 11 месяцев назад

Stock internals? I heard that gen2's ea888 can handle tons of power if you manage tq correctly

@zackarimartel2980 11 месяцев назад

How much boost you running on the ko4x.

@845_Mk6 11 месяцев назад

490on a ko4x hmmmm

@cooperdouglas3747 11 месяцев назад

@@845_Mk6hes making 360whp on his k04x and his buddy is running 490whp on the boss 500 kit

@whorutothink 11 месяцев назад

@@abdallahalassaf8084 The initial torque is a concern with the oem connecting rods, especially on a smaller hybrid K04 turbo. The torque curve ramps up significantly quicker (hits full boost a few hundred rpms sooner than a GT28R). I reach full boost on the CTS K04-X (~26 psi) at 3200 rpms.

@NuffxSaid 10 месяцев назад

I'm limiting myself big time on my build with fueling. I have an 83mm bore, IE pistions, rods and springs, mhale bearings, Ferrara valves, IE mani, CTS TBE, CTS intercooler and rad, CTS outlet and throttle pipes, DV+, K04 CTS with IE K04 tune, DSG tune and mani tune. Running stock injectors, hpfp and lpfp. I didn't set up for meth, I don't want it. I'm doing the suspension now, then I may dive back into the engine if I dont start on body work.

@caveone-365 11 месяцев назад

Always enjoy your videos fellas 👍 Nothing wrong with those numbers whatsoever, it will be a very different animal since a competent tuner had a hand in it, and I bet the owner will be pleased. The build is decent too, with good quality/ welll chosen mods. That Boss 500 compressor is a nice looking unit of course. Thanks again for sharing, and can't wait for the next one! 🙂

@aaronkent76 11 месяцев назад

Would love to see some of these cars at a drag strip, road course or auto cross Thank you for all the hard work of doing this content You guys are amazing

@845_Mk6 11 месяцев назад

Love the mk6 content !

@jaygray99yo 11 месяцев назад

The things I would do if you guys were closer I did all the work to my car myself but idk who to trust with further tuning I have the cts boss kit on my GLI made 363 341 whp on 93 but I want more!!!!! 😂 cts kit is really nice so far

@CliffB5A4 11 месяцев назад

Love your work! 🖤

@steveallam 5 месяцев назад

Awesome keep it coming show more tuning ❤

@ScottieDoNot 11 месяцев назад

Love your videos and all your work!

@JusDitty 11 месяцев назад

love the mk6 content!!!

@voltioxz87cod55 11 месяцев назад

I wish I could do my mk6, with you guys but I'm from Puerto Rico 🇵🇷

@yadieldeleon5957 11 месяцев назад

Busca cabrerabrakes la mía hizo 426whp sin gastar 3 mil en ese kit con ko4 porteada de Puerto Rico y methanol es mucho mejor el hizo 330whp en el video y eso lo cojes en una ko4 normal

@MattRodriguezgti 11 месяцев назад

426whp on a ko4? Hmm….

@voltioxz87cod55 11 месяцев назад

@@yadieldeleon5957 grasias 💪

@voltioxz87cod55 11 месяцев назад

@@yadieldeleon5957 en q pueblo

@Scatterurremanez Месяц назад

I'm so giddy because I am getting the same turbo for my 8j tts

@junkyarddawgfixit8970 11 месяцев назад

Nice job, nice car, do those run in stratified mode under load and what were the max boost/timing to net those numbers? Keep rolling....

@sebastianlorenzo4935 11 месяцев назад

When’s the next live feed. ?? Need to unveil the drag car !!

@COMotorsports 11 месяцев назад

We just fired it up over the weekend. More to come.

@4BillC 11 месяцев назад

I have a flex fuel A4 and was wondering about these boss kits. Keeping the stock fuel I'd be able to go a lot farther, right? I also have a methanol injection that I plan to put on. Currently IE stage 2. Are the boss kits worth it?

@savagecr-x2438 11 месяцев назад

Direct port pro meth kit on a snow snow performance vc-50 controller oooooo baby that would be killer

@Daryll_Flaro 11 месяцев назад

Gotta order me one of those hoodies!

@jeanfrancoismenard705 11 месяцев назад

What do you think we can do with boss 500 on R mk6 full bolt on with HPFP on 94 octane. QC. What figure we can hope ? And witch tuner you can use for this purpose ? Car is on IE stage 2 pro and boost is fuc .... High peak over 30 psi Sound not good.... surging flickering boost.

@scottricci7154 11 месяцев назад

Would the elite 1500 be sufficient to run a vr?

@slic1one 11 месяцев назад

considering this kit for my mk6 Golf R, but not sure how to go about tuning for it, as I don't have any proper tuners locally

@jeffkoch8612 11 месяцев назад

Remote tuning

@cooperdouglas3747 11 месяцев назад

Best option would to find a buddy or purchase a laptop if you dont have one, and buy the “UNIconnect plus” and have the tune sent to you. Its an easy job to do at home. I’m know there’s other brands such as APR, Tunezilla and Cobb that will have the same idea as UNIconnect.

@MrTrick450 10 месяцев назад

when i got into vw i was told apr was the way to go but now that i have apr i never see anyone use it why is that

@josemarques4674 11 месяцев назад

if money wasn't an issue... sick!!

@JusDitty 11 месяцев назад

thought i needed a boss 600 kit for those power levels. what type of setup does the 600 kit open the doors for? is it overkill for a stock motor 450hp setup?

@abdallahalassaf8084 11 месяцев назад

Run on low tq(not too low) set up and you'll be fine and make sure your cooling system is good to

@jameshaulenbeek5931 11 месяцев назад

Have you guys ever built/tuned a compound turbo setup on a V-dub?

@BADMUJU 11 месяцев назад

The hpfp is not close to being maxed out. The stock lpfp and fuel pump controler is the limitation. The ea113 hpfp would need to be upgraded at that hp level.

@Alpinee30 11 месяцев назад

Wrong and HPFP is the first to run out About 350 wheel is the limit Its well documented. Also its why Some people run Nostrum HPFP & MK7 R injectors like myself.

@BADMUJU 11 месяцев назад

@alowlevelbot43 The MK6 GTI has a TSI engine that does need an HPFP upgrade. The FSI needs an HPFP upgrade to run anything bigger than the stock turbo. The Golf R has a different engine.

@oWolf0 4 месяца назад

So around 360whp on 91 is the max on stock fueling?

@COMotorsports 4 месяца назад

Depends on type of fuel. This had to be turned down. Left with about 330whp on 91.

@845_Mk6 11 месяцев назад

Any chance u can explain the leak situation

@COMotorsports 11 месяцев назад

Sure, a coupler slipped off.

@845_Mk6 11 месяцев назад

@@COMotorsports assuming it was the outlet side and if so did u have to weld it for it to hold cuz my pipe blows off a lot

@COMotorsports 11 месяцев назад

@@845_Mk6 nah just needed to tighten the clamp

@845_Mk6 11 месяцев назад

@@COMotorsports cool thank you for your time we appreciate you n all the content!

@vinnyvega1985 11 месяцев назад

I’m so full of questions. I’ve considered this kit for my MK6R. Firstly, I know my car has an EA113, but don’t the MK6 GTI use the early version of the EA888? Also, my car has the APR Direct Injection pump, so I’m curious how much this fuel system is good for. I know the EA113 ECU won’t run port injection so I’m limited unless I buy a standalone ecu. Love the videos man

@COMotorsports 11 месяцев назад

The engines are quite different but there are options for fueling for your car. It just comes down to power goals.

@vinnyvega1985 11 месяцев назад

@@COMotorsports how much is the APR high pressure pump good for? I’ve read 500hp is that accurate?

@COMotorsports 11 месяцев назад

@@vinnyvega1985 I do not believe APR offers a hpfp for the gen 1/2 TSI.

@vinnyvega1985 11 месяцев назад

@@COMotorsports they do for the ea113

@COMotorsports 11 месяцев назад

@@vinnyvega1985 yes they do, however that's not what this is.

@thirty.mk7 11 месяцев назад

How much would it cost me to come get my mk7 1.8 dyno’d? Been changing a fair amount of stuff and looking to see where I’m at for power.

@COMotorsports 11 месяцев назад

Email us

@JacesOwnWorld 11 месяцев назад

Wow, the MK7's are seriously so much stouter than the MK6's.

@jaydinbabb9882 11 месяцев назад

would i risk anything going ko4 on stock fuel pumps & injectors? I also have a mk6 gti

@COMotorsports 11 месяцев назад

We have lots of mk6 k04 videos on the channel, check'm out.

@jg-pt4gu 11 месяцев назад

NICE

@wouter1202 11 месяцев назад

Here in belgium we have 95 and 98 octane on the pump but 95 have 10% ethanol in it 98 5% 😅

@COMotorsports 11 месяцев назад

Your 95 Ron is our 91oct.

@hyper8545 11 месяцев назад

Exact same gti i own 😂

@phoenixrising7047 11 месяцев назад

Is a Mk 7 Gti a better platform for all round performance than a Mk 6 R? The 4WD is a big one for me and I hear the older engine is more robust but certainly being drawn to the later model as its similarly priced. Looking for a long term daily to improve gradually and not end up regretting purchasing one or the other. Any input appreciated.

@youtubejunkie8053 11 месяцев назад

The platform on the mk7 GTI is better if all you want is cheap power BUT the mk6R is FAR superior in multiple ways.

@jameshaulenbeek5931 11 месяцев назад

Each generation has it's pros and cons. Not sure where you heard of the older engine being "more robust", but the Mk 7 GTI can handle a lot - the third gen EA888 is a beast of an engine. I recently got into a Mk 7 R, and I can say it's definitely a different animal from the all FWD platforms - that AWD makes a massive difference in acceleration on slippery surfaces (tires are also very important here), also in handling. The FWD GTI is going to be a blast to drive and modify, as is the AWD R. The question for you is, do you want FWD or AWD?

@phoenixrising7047 11 месяцев назад

@@jameshaulenbeek5931 Pretty sure AWD will win in this instance. If I can safely drive it faster that's a giant factor. I have heard that VW stuck with the older engine in the R as it was better able to reliably cope with the higher output over the '888 GTI. Best go for the 6 spd manual over the DSG I reckon.

@jameshaulenbeek5931 11 месяцев назад

@@phoenixrising7047 AWD is a blast. Put good tires on it and have fun. Also, while there are differences in the engines between a Mk 7 GTI and R, the R doesn't have an older generation engine. And I do have the DSG - it's a lot of fun.

@MeltingRubberZ28 11 месяцев назад

@phoenixrising7047 the MK7s can hold a boatload of power. Making power on them is not a reliability concern if tuned correctly.

@christianpalazzo9647 6 месяцев назад

Where do I find a black grill like that, can’t find one anywhere

@COMotorsports 6 месяцев назад

paint/plastidip

@MattRodriguezgti 6 месяцев назад

This is my car and the grill is rattle canned lol

@whorutothink 11 месяцев назад

Let me guess...the leak was coming from the intercooler side of the turbo outlet pipe? 😏

@COMotorsports 11 месяцев назад

No. Just loose clamp.

@Tantoblade1pd 9 месяцев назад

I thought MK6 GTI's start bending rods at 350 horsepower? Or is that not true?

@COMotorsports 9 месяцев назад

Nah

@Tantoblade1pd 9 месяцев назад

@@COMotorsports What sort of horsepower can you run before you need to upgrade rods an/or pistons?

@andrewwright. 11 месяцев назад

nice

@k.thornton3469 11 месяцев назад

So you guys do most pulls in 3rd gear?

@COMotorsports 11 месяцев назад

4th, some DSG 5th.

@DS-ed9nn 11 месяцев назад

how much boost were you running at the end with this kit?

@COMotorsports 11 месяцев назад

Not much. I think around 21psi. This was filmed months ago so I can't remember exactly.

@DS-ed9nn 11 месяцев назад

@@COMotorsports 21 at high rpm? i have this kit on my car and anything more than 18psi will start dropping rail pressure above 5500. just curious because im peaking at around 21 in the midrange but i taper it back so i dont have fueling issues on the top end. im on stock fueling as well. thanks.

@COMotorsports 11 месяцев назад

@@DS-ed9nn sorry don't remember exactly, was months ago.

@DS-ed9nn 11 месяцев назад

no worries, great video again btw @@COMotorsports

@jasonott2283 11 месяцев назад

Would this setup be applicable for my Mk6R?

@COMotorsports 11 месяцев назад

Similar stuff yes.

@jasonott2283 11 месяцев назад

@@COMotorsports or should I just VR6T swap it when the stock turbo fails?

@COMotorsports 11 месяцев назад

@@jasonott2283 if you want to spend a hole bunch more money sure lol

@repll 6 месяцев назад

Stock block?

@MattRodriguezgti 5 месяцев назад

It was in this video. Not anymore though

@haroldbutler778 11 месяцев назад

Stock internals on this block?

@COMotorsports 11 месяцев назад

Yes

@El_Jefe_S3 11 месяцев назад

A hybrid k04 can make 450wheel kw

@COMotorsports 11 месяцев назад

Nope, and not without fuel could it even think about it.

@whorutothink 11 месяцев назад

The turbo might be capable of making that much power, but the oem low pressure fuel pump limits the GTI to around 350 whp (same for the MK7). Also, the smaller turbo spools more quickly, and therefore the torque curve ramps up a few hundred rpms quicker, so the connecting rods become a concern. I'm currently running the CTS K04-X kit on my daily driven MK6 on the stock rods/fuel system, along with a custom tuned ecu/tcu. At around 380 whp, the high pressure fuel pump becomes the limiting factor.

@jordancespedes15 11 месяцев назад

Direct port meth and send it , it will probably make too much power for the fwd

@vitomelchionno6225 7 месяцев назад

Stock engine?

@COMotorsports 7 месяцев назад

yes, but it's here now for more upgrades.

@vitomelchionno6225 7 месяцев назад

What is the engine stock limit?

@iliaspsath8942 3 месяца назад

@@vitomelchionno6225about 600nm

@ArielJLuna 26 дней назад

Boss 500 for barely ko4 #s LMAOO , upgrade that fueling man

@COMotorsports 26 дней назад

It made over 400whp. Not k04 numbers

@ArielJLuna 26 дней назад

@@COMotorsportsthought it made 330 , 400+whp is more like it

@COMotorsports 26 дней назад

@@ArielJLuna yeah there's another video in this series.

@Alpinee30 11 месяцев назад

Needs a Nostrum HPFP and MK7 R injectors. and water meth.

@chroniccrypto75 16 дней назад

Needs upgraded brakes

@COMotorsports 16 дней назад

nope

@chroniccrypto75 16 дней назад

@@COMotorsports I got golf R brakes on my Ed35 makes it so much better with the extra power.

@COMotorsports 16 дней назад

@@chroniccrypto75 this has a good set of pads which most don't realize make a huge difference.

@craizygolf1980 11 месяцев назад

CTS SHOULD CALL THIS BOSS 300 OR BOSS 400

@COMotorsports 11 месяцев назад

Nope. It's labeled correctly.

@craizygolf1980 11 месяцев назад

@@COMotorsports 🤔🤔🤔

@COMotorsports 11 месяцев назад

@@craizygolf1980 turbos are rated as HP not WHP. So it will make 500hp for sure.

@craizygolf1980 11 месяцев назад

@COMotorsports yes, I understand probably when it's all done I might hit the 500+ It's just that I was really hoping to see it ! Great job on ur behalf 👏 👍 👌 🙌 😉

@JordieG8 10 месяцев назад

That turbo is a bit of a dog hey?

@COMotorsports 10 месяцев назад

No, not at all. Doing exactly what I'd expect for a turbo of this size to do at this point on our fuel.

@JordieG8 10 месяцев назад

@@COMotorsports power wise, yeah. I was kind of talking about spool, like like 38-4000? Hard to tell however.

@COMotorsports 10 месяцев назад

@@JordieG8 Maybe a couple hundred RPM but nothing out of the ordinary. I wasn't starting the run until a bit later also as the TQ hit is what drags down the fuel demand. This one's coming back to push the turbo more. :)

@JordieG8 10 месяцев назад

@@COMotorsports looking forward to it. I would like to see a GT2260S on your dyno as well.