MUST WATCH IF YOU ARE DOING TIMING CHAIN OR BELT REPLACEMENT ON MAZDA FORD

Подписаться 948 тыс.

Просмотров 113 тыс.

50% 1

MUST WATCH IF YOU ARE DOING TIMING CHAIN OR BELT REPLACEMENT ON MAZDA FORD
If you have Ford or Mazda and you are about to do timing chain replacement, or timing belt replacement you must see this video so you do not mess up your engine. Mazda and Ford have developed multiple engines together and they use the same design to keep they crankshaft pulley stuck in place. There is no key on pulley for the timing belt or chain. There are certain torque specs that you need to follow and use new crankshaft pulley bolt every time and new camshaft pulley bolts if removed. If do not follow this procedure when replacing the timing belt or chain you will mess up your engine and most likely bent the valves.
This video might be helpful on 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019:
Ford Focus Timing Chain Belt Replacement Tip
Ford Fiesta Timing Chain Belt Replacement Tip
Ford Edge Timing Chain Belt Replacement Tip
Ford Flex Timing Chain Belt Replacement Tip
Ford Explorer Timing Chain Belt Replacement Tip
Ford Taurus Timing Chain Belt Replacement Tip
Ford Fusion Timing Chain Belt Replacement Tip
Ford Mustang Timing Chain Belt Replacement Tip
Ford F-150 F150 Timing Chain Belt Replacement Tip
Mazda 3 Timing Chain Belt Replacement Tip
Mazda 6 Timing Chain Belt Replacement Tip
Mazda 5 Timing Chain Belt Replacement Tip
Mazda 2 Timing Chain Belt Replacement Tip
Mazda CX-7 Timing Chain Belt Replacement Tip
Mazda CX-3 Timing Chain Belt Replacement Tip
Mazda CX-5 Timing Chain Belt Replacement Tip
Lincoln MKX Timing Chain Belt Replacement Tip
Lincoln MKX Timing Chain Belt Replacement Tip
Lincoln MKT Timing Chain Belt Replacement Tip
► Mechanic Tool Set: amzn.to/38Nt311
► The OBD Scanner that we use the most: amzn.to/2QgN9KH
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmech...
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@AutoRepairGuys 4 года назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@NullH3ad 3 года назад

I just did a front timing cover reseal on a 14 Focus .. I learned this lesson the hard way. I ended up with p0016 timing correlation code, but surprisingly the engine did run. Your video helped me to understand that the crank sprocket is not keyed to the crank, nor is the pulley which contains the crankshaft position sensor reluctor wheel. I was able to lock the crank in place and roll the cams back into alignement and all is well. Thanks for this video, it was very helpful.

@alexhoexum9548 3 года назад

Thanks for the video, great info here and this is the same motor that’s in my Ranger so this video helped a ton!

@videogregor 3 года назад

Very informative video. Thx!

@Shirkatron 3 года назад

just did a timing cover re-seal and learned this lesson the hard way.

@cjslowman08 3 года назад

Did you use old crank bolt?

@Shirkatron 3 года назад

@@cjslowman08 Yup I’ve been working for Subaru for seven years as a SM Tech now I do used cars for extra coin. The job looked very similar to our chain cover re-seals and other Toyota chain cover re-seals so I did not focus on reading every warning on Shop Key Pro. Before removing the crank I saw the reluctor gear and said “weird”, double checked Shop Key and said “well I don’t have the special tool”....”I’ll just mark the pulley against the timing cover”. Three hrs later car won’t start. Then print out all the data from Shop Key, including the safety info and supplemental info. A pot of coffee later I call my Ford guy (who’s a foreman now) and say “how bad can someone shot their self in the foot doing a timing cover re-seal without knowing the warnings?”. His response was “you pulled the crank pulley without the stay tools...ugh...we’re getting an average of one a week this year. The whole engine is out of time and the valves are probably bent”.

@Shirkatron 3 года назад

@@cjslowman08 yes I reused the crank bolt and diamond lock washer.

@cjslowman08 3 года назад

@@Shirkatron I did a front timing cover reseal on a 2015 ford escape 2.5 for the first time. l reused the crank bolt and diamond coated washer. Did a test drive and everything is fine. I just heard it is recommended that a new crank bolt was nessasary when taking off crank bolt. I had co workers that helped me that have done this. Didn't read Mitchel even though I printed up the instructions.

@Shirkatron 3 года назад

@@cjslowman08 i mainly work on Subaru and you would be surprised at the bolts, washers, and seals they want replaced when taking a timing cover off. Like your coworkers I used good judgement and decide on what needs to be replaced. If the crank bolt didn’t fight me coming out, I keep it. If I didn’t rip the crank seal taking the cover off, I keep it.

@ephraimcamacho9600 Год назад

Thanks for the info!!!

@ignatiusabrahamshapaka2071 4 года назад

I replaced the timing belt on a 1800 Mazda F8 engine. The timing marks on the cam pulley is A or B or CX. Which of these are the correct setting? Much appreciate your help in this.

@abisismael1343 4 года назад

Thanks

@carlosbanegas7577 Год назад

thank you very moch

@mashrurahmedkaify9305 2 года назад

Hi, i have an 2009 ford fusion se 2.3l automatic. My question is can I put a standard transmission from mazda3? If so, do I need to use the ecu from the mazda3 aswell?

@grippingyarnsuk Год назад

Great video. Can you do that on an mx 5 nc with the engine in ?

@joeshafer881 2 года назад

So what millage interval would you recommend to change timming chain on this 2.5 I can't find a maintenance interval for this job... they say the chain is good for life of vehicle but I don't buy thay

@erasmosolis1963 3 года назад

Does Mazda 1992, B2600i have the belt that doesn't have the small canal ?

@ryanramlochan1504 3 года назад

Do you have a diagram for a mazda e5 timing marks,it's a carburetor engine

@iCrazyBoy99 3 года назад

Thank you so much for the explanation, you got a new subscriber

@nikeshnabee 4 года назад

When will the f30 timing chain video be available to watch

@yfautocare.diagnosticrepai7918 3 года назад

How I can take timing Marks

@pocketaas75 4 года назад

Does this apply to both the Mazda 5 2.3 and 2.5 liter engines?

@nelsonmartinez1281 4 года назад

If they come with timing chain yes it’s apply for them!

@gertis7420 3 года назад

Great info. Does this motor have friction washers on the crankshaft?

@chriscusick6890 2 года назад

Yes it does

@govinseelochan4925 2 года назад

I look everywhere and cant find the engine number in the Mazda 5 engine,,,help

@user-lh4us9ps6y 2 года назад

hello dear how I install vvt gear Ford mondeo

@vinceking719 Год назад

Thanks for the info but ypu could have explained that in 30 seconds. i came here to learn how to set the new timing chain.

@kwalatamonate3713 2 года назад

Mazda LF 20 timing

@gilgodinez1018 Год назад

Thus happened to me, crank pulley jumped. Heads have to be worked on now. Now my question is, if pistons look ok, did this hurt the crankshaft or piston bearings? Pistons are able to smoothly go up and down. I removed the oil pan, no debris in there.

@dirtrider5001 Год назад

how did it happen, was it torqued correctly?

@gilgodinez1018 Год назад

@@dirtrider5001 got the car this way. Took heads to a machine shop, installed them back in. Car seems fine now. Two valves were replaced by shop.

@govinseelochan4925 2 года назад

Where is the engine number in the mazda 5 engine,,,,from Sanjay from trinidad

@davidsimmons5936 Год назад

I'm Jesus I'm in gold Beach Oregon hi friend

@zacosa4569 3 года назад

Ok well...how about setting the timing properly then where is that?

@WaveAction777 4 года назад

Why is that pulley not keyed?

@tyronenur2373 4 года назад

I guess friction washers are cheaper or easier to manufacture 😂

@sicklad3277 3 года назад

@@tyronenur2373 And then they require special tools and take twice as long to install and time, so i imagine they save a few cents a motor and cause headaches for everyone.