Langmuir Affiliate Link and Discount Code: ManCrafting Save $100!!!
Here's my Affiliate Link store.langmuirsystems.com?aff=2
Special Thanks to my good friend Greg Mead aka Tall Greg aka @themakerlife on Instagram. He is always here to lend a hand when I need it. If you haven't seen his work on Instagram, do yourself a favor and check it out.
We made this modification to my Langmuir Pro this week to prevent potential EMI issues caused by an SMT inductor that is ironically intended to act as a trap for EMI emitted from the Crossfire Pro Board. By removing it and putting in place a solder bridge between the two contact points EMI interference from outside has been eliminated in tests and several owners who have taken the time to make this modification. It took us about 45 minutes to pull it apart make the change and put it all back together. That included filming and moving cameras etc. So I'm guessing someone skilled could do it in under 30 minutes and someone with no experience could fumble through in about an hour.
This fix is specifically for Batch 1 and 2 owners. This modification will be in place with all future orders and will not be required. The new boards will have a Zero Ohm resistor in place of the inductor. The inductor is a little rectangle while resistors are cylindrical. There is no need to do anything if you see the resistor in L1.
It's important to mention, this is not a Langmuir issue. Many Plasma CNC Tables battle EMI issues I found out as I was researching this issue. Grounding bus bars, grounding rods, and many other additional features have been added and sold aftermarket to deal with this issue.
Link to the Forum Post from Langmuir:
forum.langmuirsystems.com/t/f...
HTP Affiliate Links:
Multi Process Pulse MIG Welder 800usaweld.com/products/pro_p...
TIG Welder 800usaweld.com/collections/ht...
Plasma Cutter Used in my videos 800usaweld.com/products/micro...
Table Torch 800usaweld.com/products/micro...
Welding Helmet 800usaweld.com/collections/op...
MIG Gloves 800usaweld.com/collections/cl...
TIG Gloves 800usaweld.com/collections/cl...
Amazon Affiliate Links:
Air Compressor with adequate capacity amzn.to/2PFPo7X
Certiflat Weld Table weldtables.com/#_a_cust8g
Heavy Duty Magnet Square amzn.to/2dycStl
Magnet Level amzn.to/2cS2ZYV
Round Metal Marker amzn.to/2dMikvI
Marker holder and 12 refills amzn.to/2dCLTks
Heavy Duty Gloves amzn.to/2dMiqDD
Standard Reverse Measuring Tape amzn.to/2ut3PRK
Flatback Series Tape Measure 16 Foot amzn.to/2fgdIQQ
Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw amzn.to/2dMhkb4
Photo, Video & Film Production Studio Essentials amzn.to/2dMiP9f
USB Microphone - Silver amzn.to/2dewgA5
Sony Digital Still Camera amzn.to/2dJcAA0
Mild Steel TIG Rod amzn.to/2Di9VeX
Stainless Steel TIG Rod amzn.to/2Dke8hZ
Aluminum TIG Rod amzn.to/2Dm8Q5Q
My Welding Helmet amzn.to/2GiNI11
RAZORWELD TIG 200 amzn.to/2Iw5a5N
Jody's Helmet amzn.to/2DgkTBG
My Gear
Welding Jacket amzn.to/2IqYhCF
TIG Welding Gloves amzn.to/2Dh36KA
Helmet Bib amzn.to/2Iqp9mg
2 июл 2020