Our SLEEPER Turbo Marauder Hits the Dyno... (Boost Activated Exhaust Cutouts Are AMAZING!!!) 

Best comment this year, we need this to happen!

This!

LIKE THIS SO THAT CLEET SEES THIS

this for sure. it needs to have a stock looking a/c switch that wakes it up, so you could even let someone else drive and it just feels like a really peppy, stock marauder, even if you floor it lol

it is Florida, need that control still on the real AC lolololol

Looks like he did towards the end of the video, it was all shiny.

Sam could shine my Marlin. No homo.

That's worth 50 horsepower

@@jay_wright yeah was going to say it went from really dusty to really shiny by the end of the video, lol.

Heck, they should teach Sam to do the tuning.

If they added a manual boost controller inline of the dump valve they could control when that dump valve opens.. I have that same setup on my big turbo Audi and I can keep it in "sleeper mode" longer or have it crack open and let all hell break loose at 3 psi like they have here..

Yeah 😂

I saw a V6 Camry make 500 ish hp on a bolt on super charger. You can get alot out of those old Toyota V6's

Forced induction, it's a beautiful thing.

How's he tuning it? Stock ECU or aftermarket?

They put a turbo in it hows that stock? What work to the ac system are you talking about?

I agree a Ty's Fab Shop shirt would be cool

Yes that's what I said in the other video of him fabricating for the new a/c

Tired of people demanding things from this channel but a welding shirt would be cool

Tackin’ with Ty is a good name

"Burnin' Wire & Roastin' Tires"

As long as it's faster than the tesla, let it fly!

@@Ethan-kr9bh Unfortunately it won’t be faster than the Tesla Plaid! I wish though.

It's a shiny marauder. Id be suspect of it not being stock in that condition. Sure they are rare but it's one of those cars only car guys qould notice, and it sticks out. Just like a Grand National, or an early 90's SHO. You see a gem like that in that kind of condition I would not think it was stock

Sam needs a shirt also

Makes me want to ls swap my crown vic and throw a sushi slicer on it lol

He kinda went over it in one of parkers videos. But he's just basically wet sanding the paint to 3,000 grit and hitting it with some compound and polish on a buffer. You can get good results if there is enough clear on the surface, but if you go through to the base coat you'll be in for a paint job. If a car is just dirty and kinda hazy looking it makes a huge difference. If the paint is faded in spots where the sun hits it, and it has clear coat flaking off there isn't much you can do. You can make it shiny in spots, but if the clear is flaking off anywhere its probably really thin on the entire car and you're going to make a bigger mess trying to buff it than just leaving it alone until you can get it painted.

Agrees video of him doing a car start to finish with explanation

Your over thinking it, buffing out paint is not a complicated thing its just time consuming.

@@jaydunbar7538 It's literally what he said he does on Parker's video. He went over it when he was polishing that car last week. If you want it to look nice especially on a black car you have to do it right or you will get swirl marks everywhere and it will look like crap.

@@jaydunbar7538 Ill give you that its not complicated, but it can have a steep learning curve for the uninitiated. I've seen many people destroy good paintjobs burning through the clear.... If you have ample clearcoat, you're good. But 95% of people dont know WTF they are doing and can make things far worse.... I'd say for most, stick to hand polishing, clay bars, etc. You can still get quite nice results and not screw anything up TOO terribly. Or find someone in the know, who is willing to teach you. (even if you have to pay them)

Exactly, they're having fun dynoing the car and meanwhile he's still in the back working on the blazer

Looks like a guy that never get angry too.

I mean he works his 9-5 he isn’t on holiday…..

James doesn't mess around.

Or when nitrous is mentioned....😉

Boy loves him some nitrous. Wouldn’t surprise me if he were release some straight into the AC compressor intake during a pull.

So does mine lol

Wait, is he? That is awesome!

HOPEFULLY...Sam doesn't leave his blinker on the whole time all whilst going 43 M.P.H.!!!

Out of all the cars in the fleet its perfect for him. Just the old man sleeper car taking cocky youngins to gapplebees

Pull up to the redlight, old guy in an old Maurader.. Greenlight and suddenly *angry noises and boostwhine*

sick weeks going to be insane with the group of people doing attending especially with all the first timers. hopefully it helps the other race week events grow as well.

It would be nice to see all of the crew driving something!

Evening from uk mr randy👍

Hey randy! Yes it truly is a sleeper lol. Those AC condensers are working!

@@Captain_DeSync ac is super hot today 😂

@@marksaunders2500 hey!

@@AutoAuctionRebuilds 😂

100% agreed

Hell yeah! That's perfect!!

Definitely

And George is super keen

Bump this post

He's the voice of reason haha

Go check his video out on doing the tune

Go check his video out on doing the tune

@@DrVink86 you too

What happened to KSR? Did I miss something?

Lonely getting old? My grandpa & great grandpa said it was the best time of their lives being retired and doing whatever he wants' Getting older doesn't mean getting lonely unless you make it that way. Age is just a number, not a disease.

Luckily there are 4 pornbots on this comment, alone, ready to provide companionship! What a time to be alive!

@@FarmerFpv youre an fpv pilot too?? saweeet!!!

@@corystansbury 🤣

Wasn’t the motor built to handle more horsepower than turbo can make

@@Ridinglawnmower145 yeah but they ran outta fuel

@@Ridinglawnmower145 yup but they don’t have enough fuel lol. It could easily lean out and go boom

@@Ridinglawnmower145 doesn't really matter when you lean out the engine at 7500 rpm.

@@calebc6028 Lean is MEAN!!!!!

Bump

This!!! Big time! Especially if Sam will be in it.

Definitely need to beef the rear axle up, that's a lot of power to be pushing thru a stock rear

Wonder if the oil pressure gauge actually works in this one too.

Same issue on the Crown Vic's, my family has had several retired police auction vehicles that needed a rear dif rebuild.

Done ruined it in two spots already, unfortunately. I wonder if there is a warranty on that epoxy??

I doubt a warranty would cover putting fire on it.

@@androiduberalles lol tongue in cheek

Facts!

Dude yes! They need to do that, or Gumball 3000 or even getting some cheap ass car like one of the racing Crown Vic's into the Gambler 500 would be bad ass!

THIS!!

Sam is driving it at Sick Week.

Doesn't have the brakes, fuel efficiency, or cooling to stay at 100+ for hours on end.

Watch Cleeters Bros channel, Teeth and Turbos. Sam goes into the detailing a little bit. If I remember correctly he created a line of detailing products which are still available today

Old school work ethic and integrity. Those were the days.

100% agree!

@@fauxque5057 Thanks for the suggestion!

Considering he has his own shop and that's what he does it shouldn't be a surprise.

Always gonna be that guy in the comments😑🙄.... SAD AF!!!🤘🇺🇸💯

@@thisisdumb934 I dont care who you are, turning black into glass is difficult. If you know anything about paint, black shows every imperfection.

@@TylerSmith-gy8ys read his comment again. I think you replied to the wrong guy.

+

Yeah, I was thinking this too. Good catch.

fasterproms style... they just didn't show it very often

If you watch cleetus' brother channel teeth and turbos he does a full length interview with Sam. In the interview Sam explains how he founded a car detailing supply company and explains the products.

Cleets brother teeth and turbos has actually been hanging out quite a bit and has showcased some of that on his channel

@@michaelpirson8370 Awesome thanks! Didn't know he did a video.

He's wet sanding then rubbing compound then polish basically. More in depth than that but thats basically the stages

The main product you'll need is lots of elbow grease.

Yeah I like the idea of Ty getting his build but cleetus can’t keep making builds for everyone of his employees at one point this needs to stop unless Sam gets a build because unfortunately as we all know his times running out

@@Ridinglawnmower145 so George got a build, who else..? I agree Sam should get one too but 1. He's piloting the marauder for sick week and 2. Ty is the one making all these builds happen in terms of fabricating together the amazing parts that Cleetus provides

@@georgedunkley6561 James has his own builds but Ruby is basically his neighbor was also a build for his neighbor

@@georgedunkley6561 back to my point tho cleetus can’t just keep handing out builds because they always end up in some tricked out 427 with motion parts

Ty has a truck or something that he’s working on from home, I believe. Sam has his own shop that’s pretty well set up. It was featured in a previous Cleet video. Those guys are fine where they’re at.

Have a smokey and the bandit style chase

@@johnc.hammersticks Great idea!

Ford powered would win.

Twin a/c compressor Coyote... Yeah I remember those 😁

Definitely

The shop aint that big that he needs a ride in there 😂

@@Simon-747 I think we are talking about a cart to use to drive over from Sam's shop/house which is a few houses down from the shop across the street from James

That is genius

Sounds like he will be !!