P0740 P0700 P0944 How to replace Torque Converter. Transmission whining noise 62TE shudder slipping 

Thank you for being an honest person. Not that many mechanics like you around anymore.

You explained that really well, I appreciate that. Because I'm big on details. And now I know how the transmission works furthermore. Keep up the great Tutorials/Tips!

More P0740 TIPS here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MlneNbEcJ4Y.html Always do this after any major transmission repairs: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1euQyVEhqiw.html

Man, fantastic video, really to the point and clear!!! Thanks!

A lot of respect you my man your proffessionalism is of the highest level

The best video ive seen thus far on RU-vid.

Hey 👋 JT I never would go into the guts so far. Good explain. 👍greetings

Thank you sir you are the man love your vids keep up the great work also just sub👍

Well explained. Gd. Info. I was about to buy a complete transmission for my 2001Chrysler 300m. The code is p700and p740.

Your video needs more views, great Job man.

Respect your professionalism.

My truck is in for this code. I hope the mechanic is as thorough as you.

I have this issue (p0740) on my accord and replaced the solenoids which didn’t help. I assume the pump or torque converter are bad. About how much does it cost to do a fix like this?

I have this whining noise when I accelerate and/or step on the accelerator on my 07 Nissan Altima. I had a suspicion that it would be either my Torque converter that’s the issue or my actual transmission fluid pump. Could this be the case?

I just watched your vid and found it very informative I also am having this code740 come up on my 2000 Dodge durango 4.7 with the 45rfe thing is the check engine light comes on and off would a fluid and filter change be worth doing thank you for your time and reading this much appreciated

thanks for the video and explanation. I'm about to have to tackle this myself but as far as replacing the pump, any tips? What should I look for as far as determining it's condition? Also, any thing to consider in regards to the solenoid pack? Thanks again

I need this job done to my 2013 caravan. What does it typically cost at the dealer and would it be a good idea to just buy an aftermarket warranty to cover my cost? thanks

I have a 2004 Honda Pilot and that code popped up just a day ago but car has been driving perfectly doesn’t do any jerking when changing shifts or any funny feelings while driving any idea what may have made the code come on?

hello my friend you are a wonderful person i have a problem in 62te when i put D or R the engine stops working and in the obd scan it does not show any problem can you help me

Ok so my lancer has thrown the p0740 code but will randomly bog out then rev super high piston slap and then tell me to slow down even though I'm doing the speed limit what do I do

Great info do you know where the torque converter clutch solenoid on these transmissions?

I just subscribed and liked this video! It’s very well done and easy to understand, TY! I’m having this exact problem with my 2010 Dodge Gand Caravan 3.8…gotten three quotes! My question is, how many hours does the mechanics guide flag this job at?

Hey Jt could you post a video on 2012 Durango 3.6l P2096 CODE TIPS PLEASE

I recently Just got the p740 "Torque converter Circuit open/fault" code on my 2000 Plymouth Chrysler grand voager se Would it be possible that it could also be the Torque converter solenoid is faulty as well?

Thank you so much for really explaining how the torque converter works and also explaining about the pump influence on it. I have an Acura MDX 2002 and I had the p0740 code. It says torque converter clutch solenoid circuit/ open. Is this cold automatically the whole torque converter or could it be just one of the solenoid circuit that need to be changed out. Could you do a video on the solenoid circuits

Awesome, how much does a job like that typically cost?

I get these 3 codes on my 2013 ram rt 1500 P0740 P0734 P0735 Do u know if these are all similar and would it be ok for me to keep driving my truck like that while the dealer hits me up to check it out?

Good videos 👍

What does it mean when I get the P0740 and P0700 at the same time?

You need a tv show or teach young people ... Great vid again.

Good explanation What’s your take on P0744? 2001 Nissan Maxima with 203k miles. It was shifting very blandly I did a drain and fill ATF (synthetic) and 1 bottle of Lucus . I cleared the code and drove the car. It was much better and got same code after 70 miles. Continued to drive car and the shifting and driving got better the more it was driven. After 300 miles it was almost back to normal. When I did the ATF drain and fill the fluid was black/brown. No metal shavings or Metallic tint to the fluid. It also didn’t smell burnt. Will the code just go away in the future. I may just clear it again since it is driving much better now. Would this be the connector wiring harness or the TCC inside the transmission which is only replaced by replacing all solenoids with repair kit Nissan Part No.: 31940-80X25 SOLENOID REPAIR KIT - CONTROL VALVE About. $77-120 part

Great video! I’m getting the same code on. Dodge Journey 2013. What is a reasonable price for part and labor?

What if I'm getting this code on the 2015 Dodge Durango and it only has 93 k miles on it? I went to other transmission shops and they kept saying I need to change the alternator and transmission and everything almost $4,000. But they'll just turn off the check engine light and don't do anything else. I really feel like it's more of me having a lot of debris in there and they keep turning off the check engine light and wanted me to come back and wants the truck can barely drive or break down so I can get all that money, that I do not have. What is my easiest fix for the situation?

Smart thinking! 😁

Hey my is jose I have a wheelchair accesible van 2007 grand caravan 3.8 80.000 miles and I a have p0740 the transmission is lock in 2nd gear i replace the solenoid pack and got it reprogram and it would shift normal after 2 week after the engine light come on and it would still shift but in the 2 gear it would rough after 10 of it would shift normal and smot now the transmission got lock up again how do I bypass it ?? So I could take to transmission shop ?? And why its that when I reprogram the solenoid it started working again ? I in a little pickle cause I don’t if is the TCM or the torque converter what you recommend watching your video you suggest to the a rebuild but I at the moment I don’t have the budget to rebuild it could you help me how to take it of limp mode ??? In the mean while thanks

I found out about it when I was using code reader no engine light

Hi I don't hear anything but normal sound and transmission not slipping but I would like to check transmission fluid how can I do this?

I just took my van into a shop for the dreaded p0740. They recommended a full rebuild due to the clutch material from the torque converter contaminating the rest of the trans. The vans never given me an issue shifting, and fluid was changed about 70k miles. At 107k now. The cost is 3k for a full rebuild. Just curious what your profession opinion would be. Thanks in advance

I bought a 2001 journey a week ago. It started up fine moved ok . It had a little wine under the hood. I started looking at your videos and I had no engine light. I drove it about four miles and noise got louder and then wouldn't move. I checked for codes which had a po868 and 731. I went ahead and changed the transmission oil and filter. Started up again and all was sweet. Shifts great!!!! Went for a ride for few miles now I have a code po 740. Which means noise for torque converter. I don't have any noises at all now. Would there be any issue driving this vehicle for a while? Thanks for the info on these vehicles..

I know this is an old video, but, Can you please help?!? I have a 2001 Dodge Ram 1500 5.9L, it runs good in park or neutral but as soon as you put it in drive or reverse it just dies out, kinda bucks and shuts off I was told it was a torque converter lock up switch,(TCC solenoid I assume). Does you think that would be what's causing the problem? Or maybe the converter itself? ANY help would be GREATLY appreciated!! Thanx in advance! (Edit): Great video btw, very informative and easy to understand. 👍

We just bought a 2013 town and country. The check engine light came on a few miles after leaving the car lot. It's been a nightmare the past few days trying to figure out if this is serious or not. 129k miles on and it shifts very smooth but that engine light will come on soon after resetting the codes. The owner of the dealer said he will go 50/50 since it was sold as is. He sent me to a transmission shop he recommended and they said they have to drop the transmission and that's $600. After watching your video it's kind of clear it's the torque converter. Do the vehicles usually show any symptoms with the P0740? Could it possibly just be a solenoid or sensor if no transmission symptoms exist? Thanks for great video!!!!

Funny how some of the best video's that are short and to the point get the smaller amount of views.

But can it be a bad sensor and does this code affect inspection because the car runs great

My 2013 town and country is making a noise when idling but stops when hitting the gas. Also gets worse when ac is on. Guy said it’s the torq converter does that sound right to you? I was thinking a Barron was bad. Should I drop the pan and check for debris? Like I said when driving there is no noise or anything just when idling

Recently had a 62TE transmission rebuilt on a 2013 Dodge Grand Caravan. Now it’s showing P0740 code. Shifting badly. Any suggestions or put a Reman trans in it. Frustrated. Thanks for any suggestions.

Ive replaced the valvebody 3 times and torque converter once and still sleep out of forth gear i get the CEL and still get the torque converter po740 code ! What is the problem ?

Hey are you located near Las Vegas Nv. Could really get a price quote from you

So i got this code on my jeep Cherokee. Ill like for you to come get my truck and fix it lol

I have a code p0740 torque converter clutch failure after I swapped my top solenoid and did a drain and fill, 2001 honda accord ex f23a1 figured it would solve the matter made it worse

What kind of vehicle is that in the video?

Not all typical mechanics would just change the t torque converter maybe a blow jo shop may do that

Well done... Where are you located I have a mazda rx8 with that code and I cant get anyone to replace it for me... I will even ship it to you if I can! Thank you

Hey how many miles are on that vehicle

2005 T&C.....I have a P0740 and P0700 code..... I have no debris on the magnet in the pan.... I have absolutely no symptoms while driving (no slipping, no shudder, no nothing drives just fine)........ I changed fluid and filter..... CEL stayed off for a month then came back on................ what gives?

Where are you located ?

this code p0740 happens on 2007 Hyundai elantra 2.0L i4 rather put a transmission and new shift solenoids

If you a doing a warranty job the old converter comes out and the new one goes in.

I'm having the same code on my Jeep except the car just shuts off any help appreciated

So my van runs perfect zero problems. Infact it runs like new. Check engine light kicks on with p0740 . Fluid is super clean a bright red . You think the solenoid is the issue

There’s debris in all Torq converters if there’s no slipping it’s probably the sensor.

my brain wouldnt feel like a proper diagnosis was made unless i can know how or what sensor triggered that code

Check tcc duty cycle first

It would better if you stop talking so much and show us some results