Programming Compustar Remotes (Push to Start Vehicles)

Подписаться 9 тыс.

Просмотров 146 тыс.

50% 1

Works for all Compustar remotes, including 4-button and 1-button remote transmitters!
Learn how to sync up to four Compustar remotes to a Compustar remote start or security system with this video. This particular video addresses programming remotes to a push to start vehicle.
1. Press and release the start or ignition on button 15 times.
2. Immediately following the press button 'cycle' press and release the lock button on the remote.
* The push button must be pressed consistently at about 1/2 second intervals. Be sure not to press the foot brake down at any time during this process as it will cause your vehicle to start.
Want Compustar in your vehicle? Find a dealer today!
www.compustar.com/find-a-dealer/

Авто/Мото

Опубликовано:

8 фев 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@uherath1369 3 года назад

I tried suggested method on this video but couldn't get ta to work. I then followed the method that was suggested by Michelle Mendieta and I was able to reset it on the first attempt. I guess the trick is to put your car on reverse and turn off the engine. This would allow you to turn on/off 5 times much quicker. Thank you Michelle for the tip.

@393notch 2 года назад

Thank you. Your video helped me program my remote. Very easy. Thanks for the video.

@BluetoothGoat 8 месяцев назад

It worked! I pretty much pressed the button 15 times(2 push to turn on 1 to turn off) then pressed the lock button on the remote start fob.

@Aminkassam 6 месяцев назад

Thank you, your video was very helpful for programming my 2 remotes 😃

@ireianna 8 месяцев назад

This was very helpful. Thank you 😊

@chafstoff 4 года назад

Thank you this video was very helpful

@michellemendieta6144 4 года назад

For my 2015 Honda CR-V I wasn't able to get it to start using this method because it took too long. Instead, I started the car, put it in reverse, turned the car off and took my foot off the brake. Then I hit the start button rapidly to turn it on and off 5 times (car didn't go into reverse since it was off). I then hit the lock button on the remote and it programmed on the first try. When you are in reverse and turn the car off you only have to hit the start button once to get it to turn on so you can get the 5 in very quickly. Hope this helps others that are having the same issue programming the remote for their push to start cars!

@michelbeaulieu6379 4 года назад

yes thanks now it working

@plentifulprairie 3 года назад

This was perfect! Thanks for sharing so much easier!!!!

@lempan8748 3 года назад

Worked on my Acura RDX. Thanks a lot.

@blewcollarguy5491 2 года назад

This comment! I f*cking love ya

@nequ11 Год назад

You’re a lifesaver! Thank you

@chadfuerstenberg3327 9 месяцев назад

Nothing worked for me until I replaced my car battery (it was a little weak and if the car sat for a couple days it wouldn't be able to start) So either disconnecting and reconnecting the terminals did a hard reset on the device or it just didn't have enough juice, but it worked immediately afterwards.

@RajeshPatel-lu2du 4 года назад

is this works for Honda HRV 2016 and computstar remote, after installing new module for start problem, I need to redo programming on computstar as honda is not doing it

@thomaspaulsgrove8527 2 года назад

Let me add. It gets more complicated (at least for me) If you have one remote working already. And want to add a second. If I use the instructions for adding 1 remote I get 1 remote to work but not both. And if I use the instructions for 2. The one that worked will still work. But not both. What has worked twice for me is to hit lock on the new remote and key on the existing remote. They both work finally

@marcosbraga3220 6 лет назад

My 1-button compustar lights up but the head light on my push start vehicle doesnt flash , I have the button one the antenna that I can press it lights up but the car still not starting, how do i fix it?

@grayblackwood6741 Год назад

where can i get my compustar system programmed in southcoast mass?,they place that put mine in closed and they left it all a mess ,its brand new and i cant use half the features

@DJAbraxoOfficial 2 месяца назад

Will this work if I install an aftermarket push button start kit if it's one that uses passive keyless entry fobs? (not rfid fobs but similar to factory oem PKE systems)

@caraleebrush9939 5 лет назад

Will this work for a 2018 Nissan Pathfinder?

@PotentialEnder Год назад

Pressing the button down that man times does not work on my 2014 Honda. Is there another way to get into programming mode?

@justinemacalinoofficial 9 месяцев назад

What kind of Remote starter do i buy for my Rav4 2022 XLE Push start button

@ironcladpatriot5829 3 месяца назад

Yeah it works you just have to push it rapidly.

@graceannb1493 3 года назад

Put it in reverse first then turn it on and off five times it worked for me 👍

@adamsangiolo2722 3 года назад

Doesn't work on my 2017 Tacoma. Should I do something else?

@bejuled7 5 лет назад

My remote is stuck in sleep mode how do I cancel it

@dawnlivingston8136 6 лет назад

Will the Compustar Model CS920-S-KIT work on a 2017 Camry that has a keyless start?

@forbiddenera 6 лет назад

Dawn Livingston I recommend a DC3 brain with whatever remote kit you choose, or Drone..

@barnexus9994 7 месяцев назад

Hello, I need some help please. I do the pairing and the antenna lights first red then green and the lights on the car click twice as it should but when I test the remote no reaction 😢 I disconnect the battery of the car for two minutes and when reconnect it the only thing I get is the compustar remote vibrating when lock/unlock the car with the OEM remote. Is the remote defective or there something more I can do? I tried with disconnecting the antenna and nothing happened with that fix. My remote is 2WT9R-FM. I hope someone helps because I can’t find to buy a second one in my country 😅. Thank you!

@irenehandiyanto5249 2 года назад

Anybody has tried this on Honda Civic SI 2018? I can't seem to make it work

@sharoncc9192 4 года назад

Do I need all my computstar key fobs in the car when programming this compustar? like I need them all in the car if I was programming the fobs that came from the dealer.

@quacktony 2 года назад

Thanks for this. The manuals need to reflect these instructions....it does not.

@FPShkED 7 лет назад

this doesn't work for my 2015 crv push start on the newest 2 way remote. help please.

@forbiddenera 6 лет назад

Edwin Au Yeung there is another method on the newer brains for pts vehciles, im surprised its not listed here, unfortunately i dont recall off hand

@tonytieu68 5 лет назад

Will this work on my 07 Lexus gs350??

@williambethel5453 7 лет назад

with Keyes and remote in my pocket, I hook up battery and and engine starts to crank. please I need help, HOW can I DISABLE the REMOTE so that I can start vehicle normally. please help. 😭

@Pepoziid 5 лет назад

All the commands work except to start the car, will this fix it?

@anthonyclarke9158 3 года назад

BAHAHAHHA OMG

@anthonyclarke9158 3 года назад

buddy, you have to actually install shit in your car you cant just buy a remote and tada it works. but if you've already done that, yes

@khamphatimhieu557 2 года назад

I count you pressed total 15. I tried but it didn't work

@compustaronline 2 года назад

@allan4317 6 месяцев назад

Doesnt work on the 2021 Chevy Spark

@LiftsbyDavidD 4 года назад

How do you increase the start runtime without going back to the person who installed it?

@kinglatham616 6 лет назад

When I press the button to start up my car it lights up like it wants to start... the funny thing is when I put my foot on the brake it starts up, and this is a push to start

@Canukhed 4 года назад

Doesn't work. My battery is fine. I have the 1WAM4R remote which is 12 years old. Why do remote start manufactures make reprogramming so convoluted. You are all also different to do the same thing in the end. Why not just do it the way a garage door is programed? Press and hold the antenna button and press and hold the remote button and done.