Just washed a 20-minute video 24 minute video and learned nothing the guy was jabbering on about whatever washed your 5-minute video at 3 minutes and 11 seconds learned everything I need to know... you sir or a practical genius in the world educated idiots thank you, for answering my question when the rest of youtub could not! Thank you again
Very good of you to day gasoline and not gas . The gas is the propane of course. It's in liquid state in the cylinder though but not important for now .
Ok i got it 1/4" copper tube, i will do it also to my other Honda GX390 clone gen-set (China made), and you gave you viewer a simple conversion to Propane fuel without a kit. Thanks a lot,
Just remember to stop the generator by turning off the gas. If you cut off the ignition, the gas will continue to flow all over the place, and a spark could blow the cylinder head off, quickly killing you. Same thing if the motor stalls for some reason. Turn the gas off.
I have done the same thing works very well 6.5 HP and a 11 HP generator considering the conversion kits are now gold coated this works well and serviceable.
just an afternoon project, I ran 5 100 watt lights, a bench grinder and 3/8 drill all at same time and she just purrs away, Just gotta remember if engine dies to shut off propane at the tank or AALLL the propane will escape into the surrounding space and cause a BIG fire, Thank you for watching
We have 2 of them ,  one has had to have the carb replaced ,  both work well EXCEPT they both  leak oil ! ( I think I overfilled just slightly . one runs window AC  when needed , the other we use to charge 2 batteries that run the 1500 watt inverter for lights ,TV , and internet as our tv is thru internet provider. and both seem to work better now than when new .
He said 1/4 inch at beginning of video. He also sanded down and to 45 degree opening at end of tubing placed as close to carburetor, just where it misses the choke plate.
