QA1's F 100 Front Coil-Over Conversion System Compared To The Crown Vic Swap

Подписаться 20 тыс.

Просмотров 43 тыс.

50% 1

Let's break down the differences between the Crown Vic swap and QA1's all-new coil-over conversion system for the 65-79 F-100s.
-----------------------------------
About QA1: Founded in 1993, QA1 specializes in providing performance shock absorbers, suspension components, carbon fiber driveshafts, rod ends, spherical bearings, springs, ball joints and more for a variety of markets, including circle track racing; drag racing; street performance; and street rodding, as well as several industrial markets. Whether you’re looking for improved ride quality, show-stopping appearance, or faster times, QA1 delivers.
You can follow us at:
Website: www.QA1.net/
Facebook: / qa1motorsports
Instagram: / qa1motorsports
Twitter: / qa1motorsports
Questions? Call us @ 800.721.7761

Авто/Мото

Опубликовано:

15 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 170

@xxxmikeyjock 4 года назад

it is cool that someone is finally making stuff for Ford's

@QA1TECH 4 года назад

Thank you! We just want to see these classic trucks being driven more. Whether you go with our system or the Crown Vic. We did this video solely just to help educate people on the benefits of each system.

@flipflopsgarage Год назад

I've installed the QA1 setup on my 68 and it's worth it's weight in gold. The front and rear are planted and the truck is super responsive.

@QA1TECH Год назад

Thank you for the feedback! We appreciate you choosing QA1!

@ozielmadrigal9374 4 года назад

Screw it i made up my mind. Saving all my pennies to buy this system for my 72. So happy I stumbled across this.

@QA1TECH 4 года назад

That's great to hear! Give us a call when you're ready and we can help answer any questions or offer any recommendations!

@jeffmikel1188 4 года назад

If your buying the suspension for a ford did you find a way to get FORD spindels????

@augustusappling139 2 года назад

i'm seriously considering a complete frame swap for the 69 f100. you get A/C, Power Steering, Power Disc breaks, Motor, 5 speed automatic trans, modern front end, and much less fabrication than using the old chassis.

@donf1006 3 года назад

Did the 2005 crown vic on my 64, picked up a crown for 1500 drove it for 2 years! And the cut it up used the engine sold the trans for 350 used the rear axel and front suspension got 4 wheel disc. Used a 5 speed from a GT, I don't think the average joe will be useing this though its nice couldn't afford this! 🤑

@markshearer1831 3 года назад

In Australia it's easy go to Car Guy's Garage and get on of their kits that use late model readily available parts.

@user-tf5kr4qp2i 4 года назад

I have a 68 with a crown Vic and a 72 with the qa1 on it and I think both are comparable with handleing. However it took me about half the time to install the qa1 and I was able to go with my desired wheel set up that I couldn’t fit with the 68 w/crown Vic. The qa1 is more money but it looks cleaner and with the simpler install it’s better investment in my book. Less time installing means more time driving it. I spent 1800 dollar and 20-25 hours on the crown Vic and 3700 and 8-10 hours on the qa1. I picked up a 71 last month I am going to do the jaguar front end swap on. So we shall see how all 3 compare

@larrywarren1049 3 года назад

Quite the stable

@Ikillintel1 4 года назад

I'm sold, its just a matter of 2 things...finish another project vehicle i'm already working on...then saving for this when I start on my 69 f100. I was planning on the CV swap, but this is a lot less work with the desired outcome....definitely getting the rear package as well.

@QA1TECH 4 года назад

Great to hear it! Please let us know if you have any questions or need recommendations! Our tech line is 952-985-5675

@arthuraguirre2068 4 года назад

I appreciate the video. I just bought a crown vic suspension for $200. It's a little rough. Would I have preferred the mustang ll or QA1? Ofcourse. But money is a factor for us little guys who have family and tight budgets. I'm sure I'll have a few more hundred invested when done, but no where near 3k. Thank you for the video.

@richdelgzz 3 года назад

Will this work on my Corolla with a blown 428 Cobra?

@rivermetal 2 года назад

Ordered this deal in April 2021, it’s coming up to six months now and still haven’t seen it Now it’s tying up a bay and I have a pissed off customer! Should have went the Crown Vic route

@elshivi8323 4 года назад

That's my problem to wide crown vic front end

@queencitycycles1860 Месяц назад

@QA1TECH think i could make this setup work on my 1986 bullnose f150?

@1pimp4history 4 года назад

Let’s say I wanted the Q1A set up but on a 64 comet Fairlane or mustang will that front suspension work or do you guy custom make that

@QA1TECH 4 года назад

We currently do not offer a full front end kit like this for the 64 Mustang, Comet, or Fairlane. We offer non-coil-over shocks for those vehicles and we just announced our release of front Pro Coil Systems for the 64-73 Mustangs.

@grannylow7073 3 года назад

Wish you guys would have made the QA1 more price reasonable for the regular hard working guys that has the old Ford.

@oscarliradelossantos6799 2 года назад

Is there one for a c10 ? With the k -member ?

@Blktpcrzrs 4 года назад

I'll take that Vic front off your hands ;) I'm in Minnesota also.

@QA1TECH 4 года назад

Haha I don't know if you want this one! There are some missing/broken components.

@Blktpcrzrs 4 года назад

@@QA1TECH that's exactly what I'm looking for actually, I'll be having narrowed a-arms for bag mounts. Please lmk if y'all want it gone.

@normansmith205 3 года назад

Do you have something like this for a 69 Ford econoline ?

@klumsytone 3 года назад

Got a coilover conversion kit for the 99-06’ Suburban. Need one for an 02’.

@QA1TECH 3 года назад

Give us a call! 952-985-5675

@REVNUMANEWBERN 4 года назад

This must be NEW?? Have my 65 front end already gutted & CV all ready purchased, wish I had of known of this B4 , too bad you didn't show the rear of your system.

@QA1TECH 4 года назад

It's newer. We released it earlier this year. You can learn more about the front and rear system at www.QA1.net/F100 and please visit our authorized dealers for the best deals on pricing! www.QA1.net/dealers

@majordickhardin7746 4 года назад

Do you have a video that gives a quick look at the: "frame preparation for installation"?

@QA1TECH 4 года назад

We do not have a video of that at the moment. That's a great request and I will be sure to pass that along to our team! Thanks for the suggestion.

@QA1TECH 4 года назад

If you have any questions about prepping a truck for the install, please reach out to our tech line at 952-985-5675. Thanks!

@larrywarren1049 3 года назад

But we can take your money

@jasoninglehart3923 4 года назад

What's the cost of a decent brake and hub package for your system? That's a added cost you never mentioned. Most guys upgrade the crown vic brakes anyway but I'm just curious. Possibly another $400 to $900? I'm glad someone is finally doing this front end right.

@QA1TECH 4 года назад

That's a great question! It honestly depends on what kind of package you are going to go with. OE packages could run up to around $250 to $300. If you are looking at Wilwood, Baer, etc. They could run anywhere from $500-$2,000.

@swilson691000 2 года назад

I purchased the QA1 rear kit for my stock 1970 Ford F100. I plan to put a Gen 2 or Gen 3 Coyote. Will the kit fit the stock 9” axle housing?

@QA1TECH 2 года назад

Yes, the kit is designed to work with the factory 9" rear end.

@robertoramirez2841 3 года назад

I recently bought the front system for my 77 f100 I know that there’s a rear call over product but it’s only from the years 66 to 72 when do you guys are going to come up for the For the rear coil over product for the dent model 73 to 79 ?

@QA1TECH 3 года назад

We are hoping to have a rear suspension kit for the dent side models in the future! We may be able to make a coil-over setup work for the rear. Give us a call! 952-985-5675

@larrywarren1049 3 года назад

Yall got one for same year chevy?

@Maverick8t88 3 года назад

Looks wonderful! Do you have a similar system for a 63 C10? 2010 Escalade sourced 6.0 LQ9, 4L80, 3.73:1 12 bolt.

@QA1TECH 3 года назад

Hi there! Check out part number R110-200. That's what our rear setup looks like for that truck. We also have a rear install video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lH64FCP-llM.html

@larrywarren1049 3 года назад

Of course they do

@367scotty 4 года назад

750 buck crwon vic with everything. 3500 . and it doesnt work on a 56 ford . what did i miss. Also like how did they make all that aluminum look like rust lol

@bradleypiercy7163 4 года назад

Do you have one of these videos for the new rear end set up you have?

@QA1TECH 4 года назад

Not at this time, but that's great feedback! Thanks for asking, we may have to do a similar video for that.

@spikeafrica 3 года назад

@@QA1TECH please do.

@iraqirestoration2991 2 года назад

Is it possible to put crown vic suspension on chevy truck 85 I really appreciate the help please answer

@QA1TECH 2 года назад

We have not done test fitting to confirm if a Crown Vic setup would work on a 58 Chevy truck.

@trkinwithmikey 4 года назад

I noticed you didn't talk about the brakes or spindles what would be the set up on that? What brakes rotors and calipers would fit on that?

@QA1TECH 4 года назад

That's up to the driver. We offer standard and drop spindles. The most common wheel hub would be 5x4.75” the spindle casting matches the 79-81 GM F body cars. (Camaro, Trans Am, etc.) There are other hub options available through some brake manufacturers that will fit this spindle, but the most common by far is the 5 on 4.75” hub. Baer and Wilwood are both familiar with our system and would be able to recommend brake setups for you if that's the way you want to go.

@trkinwithmikey 4 года назад

@@QA1TECH this is good to know. And the sway bar?

@QA1TECH 4 года назад

@@trkinwithmikey We offer the front and rear sway bars separately or as a kit. Reminder that rear sway bar and suspension system only fit 65-72 F-100s at this time. Follow the link and enter in your y/m/m in the car filter to get the part numbers! www.qa1.net/automotive/suspension/control-arms-other-tubular-components/sway-bars

@gbdcoldstart3360 3 года назад

I want it! I want it! Can’t afford it! Can buy an actuel crown Vic for that price and swap the frame! Actually CV will be even cheaper.

@rustedratchetgarage6788 3 года назад

Any you can buy parts at any parts store salvage or tractor supply (lol)

@gbdcoldstart3360 4 года назад

Hi guys, will this work for 66 f100 what other parts do we need. Ship to canada ? Thanks

@QA1TECH 4 года назад

Hi there! Yes, this front system fits the 65-79 F-100 2WD trucks! It's a completely bolt-in system, the only other parts you need will be deciding on your brake package. And then engine mounts you can purchase through us and we also offer a front sway bar that you can also purchase. You can find dealers in Canada on our website here: www.QA1.net/find-a-dealer

@Jarritos440 3 года назад

I just inherited a in-laws f100 but my thing is can this system atleast handle me hauling supplies such as a lumber etc, I’m looking for a good fun but reliable suspension but still don’t want to sacrifice hauling

@larrywarren1049 3 года назад

Crickets

@WiCk3dCj 4 года назад

I’m wanting to turn my truck into a drift style truck and I’m wondering if this system handles well for getting sideways I have a 72 f100

@QA1TECH 4 года назад

I don't see what it wouldn't be able to handle drifting! I would recommend calling and speaking directly with our tech line on the best recommendation!

@terrybaptist795 4 года назад

Please make your qa1 system availble for 92 thru 96 f150?

@QA1TECH 4 года назад

We appreciate your feedback! Hopefully we have something in the future!

@xxxmikeyjock 4 года назад

@@QA1TECH the CV swapping on the 80-96 is gaining popularity. I am doing one right now. it is far more invasive then an older frame. I think I would have been far ahead of the game to use a custom suspension rather then a CV subframe.

@lowonfat 4 года назад

Will your setup fit a 76 f100 and will it work in rhd

@QA1TECH 4 года назад

Our front kit does now fit 65-79 F-100's. However, it is not set up for RHD at this time.

@BS85700FI 3 года назад

Will this work on a 57-64 f-100 also? I think it’s the same frame width.

@QA1TECH 3 года назад

It will not, the frames are different enough that it will not directly bolt-in. We have had a lot of requests for the earlier trucks, so hopefully we offer something in the future!

@joaquinsolis7071 11 месяцев назад

@@QA1TECHwhat about now?

@harrytapley1872 3 года назад

Do you guys make engine mounts for a big block Chevy?

@QA1TECH 3 года назад

The only Chevy engine mounts we offer for the F100 system at this time are LS Mounts.

@granadojl 4 года назад

Interesting how this dude tried to make the CV system sound like it's a lemon. These can be found complete in very good condition in AZ for roughly $300 compared to the $3,448.44 for the QA1 system.

@xxxmikeyjock 4 года назад

you are going to have to rebuild a lot of stuff on a $300 cv front end. its a core type deal IMO

@granadojl 4 года назад

@@xxxmikeyjock I'll agree with you to a certain point. Some of the CV systems out there that are being sold are trashed to hell. This is where rebuilding them will nickel and dime someone..... I guess i'm lucky enough to live in AZ where rust is unheard of and Phoenix PD cycles through a crap load of CVs. I picked mine up for $300 from a Police Interceptor with 75k miles that was rear ended.. not bad, but enough to where the frame was tweaked to scrap the car. I have a total of $400 into my swap and it is a blast to build.

@QA1TECH 4 года назад

Our sole purpose for this video was to help educate people on the benefits of each system. We just want to see the F-100s out and driving no matter what you do with them or what suspension system you go with. And our price for the front kit now starts at $2995.00.

@spikeafrica 3 года назад

Yeah and this is a fully setup adjustable setup with new everything. And it's lighter to boot.

@steamy1225 2 года назад

Do you make one for the 80 to 86 ford f series and how much? I have an 83 F100 with the v8 in it and i'm thinking of this swap.

@QA1TECH 2 года назад

Our front F100 system currently only fits the 65-72 and 73-79 F100s. And the 75-79 F150.

@steamy1225 2 года назад

@@QA1TECH well that doesn't help me. I got an 83 F100.

@QA1TECH 2 года назад

We could maybe make shocks or coil-overs work depending on your specs. Give us a call! 952-985-5675

@brandoexum3135 Год назад

Will this QA1 front suspension kit work on a 1962 F100?

@QA1TECH Год назад

We have not had a 62 F100 in to test fit this kit on, so we cannot confirm that it will work. It will work on 65-79 F100s.

@gbdcoldstart3360 4 года назад

Hi, Wondering what setup you suggest for a big block 460? Adjustability spring rate? And any suggestion for shorty headers to go with this conversion. Anyone out there try this conversion seems hasn’t been done yet ?!

@QA1TECH 4 года назад

Hi there! Thanks for reaching out! So if you are going to run a 460, we recommend purchasing our Windsor Engine Mounts (PN 7740-252) with Trans Dapt Motor Mount Kit (PN 4226). As for headers, we have not tested any fitment on those yet. Adjustability would depend on what your goals are for the truck. If you are looking for it to become a competitive street/race truck, we would recommend the double adjustable. If you are looking to just cruise in it and maybe hit the track every once in a while, then we would recommend the single adjustable. I can give you part numbers for these front system options, just need to know if you want to run standard or drop spindles.

@gbdcoldstart3360 4 года назад

QA1 Hello, thanks for talking the time. Yes part numbers would be great. I would use on street no racing. And would like the low look so drop spindles. ?! Can I call you. Is there anyone who has installed these on f100. Besides your truck

@QA1TECH 4 года назад

@@gbdcoldstart3360 Not a problem! You can call us direct at 952-985-5675 or toll free at 1-800-721-7761. We are available M-F 8am-5pm CST. Our drop spindles would lower your truck 5-7". We have had a lot of people install this front system. If you call and speak to our techs, they could probably list off some people who have done it and maybe posted the install online.

@gbdcoldstart3360 4 года назад

QA1 Soinds good! Thank you il give them a call. We can do a build a post on our IG we have 30k but can we do something a cross promo ?

@gbdcoldstart3360 4 года назад

QA1 I just to be sure, part number is 52621-s500 and engine mounts. 7740 252

@kathycornish1 Год назад

can i use my stock 15 inch ford rims . i like the stock look

@QA1TECH Год назад

Please reach out to our tech team and they will be happy to offer some recommendations for you! 952-985-5675

@rockyshow5597 Год назад

Do you make control arms for the crown vic

@QA1TECH Год назад

We do not at this time.

@monyp6186 4 года назад

Does this system come in righthand drive?

@QA1TECH 4 года назад

At this time, we do not offer an RHD option for this system. We've had a number of requests, so hopefully, it is something we offer in the future!

@user-uu1mf1be6d 4 года назад

does this kit fits and work on a crown vic?

@QA1TECH 4 года назад

No, the QA1 F-100 system is designed to bolt-on into the factory locations. We may be able to help you with some custom coil-overs for the Crown Vic. Give us a call!

@Larenz0969 6 месяцев назад

Will this fit an F250, what is the difference in the frames? ?

@QA1TECH 6 месяцев назад

We have not confirmed fitment on the F150 or F250 for this setup. The frames could be wider or different enough that this system would not be a complete bolt-on system where you would have to modify it. The weight of the vehicle makes a difference as well.

@ricardoprado8846 4 года назад

Could this system be used with airbags?

@QA1TECH 4 года назад

It wasn't designed for airbags, but if you can make them fit, it will work!

@DannyG2493 4 года назад

Can I use this on a 74 Ford ltd?

@QA1TECH 4 года назад

Hi there! Assuming you are talking about the Ford LTD car, this QA1 system currently only fits the 65-79 2WD Ford F-100s.

@123murray351 Год назад

Can these be ordered with rhd steering rack

@QA1TECH Год назад

They cannot at this time. We have had some requests for this, so hopefully it's something we can offer in the future!

@brianjohnson651 2 года назад

Will your system fit a 1980 F100?

@QA1TECH 2 года назад

We have not confirmed fitment at this time. Hopefully we can expand our product line in the future!

@hooner52 4 года назад

Is there an install video? Please please please?!

@QA1TECH 4 года назад

Not at this time, but hopefully we can get one up for you guys soon!

@hooner52 4 года назад

@@QA1TECH yes please. Maybe even a walkthrough of the Blue truck?

@QA1TECH 4 года назад

@@hooner52 That one is definitely in the works! Hoping to have that one up soon!

@robertchristensen3868 4 года назад

how much power can these motor mounts handle

@shawnpaulsen9590 4 года назад

Those mounts look very weak. Not sure I like the idea of an engine making any amount of power being held in with those. Also curious to know that answer.

@QA1TECH 4 года назад

How much horsepower do you plan on running?

@nathanhale8645 4 года назад

750

@QA1TECH 4 года назад

@@nathanhale8645 Our engine mounts will have no problem handling 750 HP.

@zombie95xx 4 года назад

QA1 750+ out of a small block

@virginiarichards9783 3 года назад

Do you make this for a 1957 f100

@QA1TECH 3 года назад

Hi there! Currently, our front kit only fits the 65-79 F100s. Hopefully, we are able to make a kit for the earlier trucks in the future. Give us a call! We may be able to make shocks work for your truck. 952-985-5675 Thanks!

@bzamski17 11 месяцев назад

Now, if you would only make that kit for the OBS Ford, 92 to 96

@QA1TECH 11 месяцев назад

We appreciate the feedback! Hopefully it is something we can offer in the future. We do offer front and rear shocks with adjustable valving.

@0lddragracer426 2 года назад

I went to the website looking for prices, and there are none...and none here! Is it a secret?

@QA1TECH 2 года назад

Hi there! You would have to enter in your options for a suspension setup to get the part numbers and pricing to pop up on our website on our Classic Truck Suspension page. The front F100 kit starts around $3180 through our dealers.

@rifflicks 4 года назад

P R I C E......why wasn't that compared?.....I just bought the Crown Vic front for 300 bucks......I can weld, use a tape measure, a drill and grinder......plus there are now a myriad of companies that sell prefabricated brackets and spacers for those with limited fabrication skills of equipment.

@QA1TECH 4 года назад

We do break down the costs a little bit without actually mentioning the price breakdowns. The Crown Vic ranges depending on what you find and who you buy it from. The QA1 front kit starts around $2999.95. Again, this video isn't to tell everyone that our suspension system is better than the Crown Vic. Whatever suspension you go with, we just want to see these trucks being driven! The goal of the video was to bring awareness to people of what's available for their trucks. For someone who maybe isn't comfortable with a lot of the custom work that could come with a Crown Vic front end, we offer a complete bolt-in solution.

@rifflicks 4 года назад

@@QA1TECH Tap Dancing around "Costs" is no where near the same as talking P R I C E

@QA1TECH 4 года назад

@@rifflicks That wasn't our intention when we shot the video. Like I said before, our main goal was to give people an educational video on the differences between the two systems to help them decide which was a better fit for them and their vehicle. This is not a sales pitch video. Thanks for your feedback and have a great rest of your day!

@REVNUMANEWBERN 4 года назад

CURIOUS: The alignment specs you use for your kit Recommended Alignment Specs Caster +6.5° ±0.5° Camber -0.5° ±0.5° Toe +0.05° ±0.05° would you use the same if the CV front end was used??

@QA1TECH 4 года назад

The QA1 F-100 suspension is a different design than the Crown Vic. The OE Crown Victoria specifications vary depending on the year and application. The specs below are for a ’05-’08 Police package car. Camber -0.4° Caster +6.2° Total Toe -0.15°

@derekstone9386 2 года назад

I have a 81 f100 will this work?

@QA1TECH 2 года назад

This front system currently only fits the 65-79 F100.

@derekstone9386 2 года назад

@@QA1TECH any chance or idea for a 81 swamp ?

@QA1TECH 2 года назад

@@derekstone9386 It's not something on our radar at the moment, but doesn't mean it won't ever be! We have had some requests for it. We could most likely make shocks or coil-overs work for you depending on your specs. Give us a call!

@mikeilikeit9685 Год назад

Vwana buy one

@jeffmikel1188 3 года назад

You say is was designed for the F100 FORD. Why don't you make some spindles for a ford?

@QA1TECH 3 года назад

We currently do not manufacture spindles except for our Circle Track applications. We chose the Camaro spindle because it opens up to a lot more variety of aftermarket brake and tire size options.

@TurningGuns 4 года назад

The vic looks like it can take a curb and get you home, qa1,not so mutch.

@QA1TECH 4 года назад

Our system actually handles pretty well! We ran it on Power Tour with no problem and we have run it on the autocross with success. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WXIzYS3NGhw.html

@user-tf5kr4qp2i 4 года назад

My 68 crown Vic required a whole new k member when slide into a curb at 30mph. Frame work was required as well... just cause the crown Vic is bulky looking it’s all aluminum so it’s not any more strong than the next setup. Also curb smashing isn’t really a strong suit for any suspension system out there.

@TurningGuns 4 года назад

@@user-tf5kr4qp2i 68? I just picked up a 99 grand marquis, and didn't notice any aluminum under there, should i look again?

@user-tf5kr4qp2i 4 года назад

Billy truth B told 2003-2011 is what you want if your doing the swap on a f100. But the cross members are aluminum on the 2003 and up I know for sure Idk about the older years beside steering and suspension is different

@TurningGuns 4 года назад

@@user-tf5kr4qp2i cool, thanks man.

@jeffmikel1188 4 года назад

WHY don't you make a spindle for a ford also? MY 1969 f100 isn't a 1969 C10

@QA1TECH 4 года назад

We used the GM spindle because there are unlimited brake, wheel and tire options for it. There aren't a lot of Ford spindles out there. Yes, there is the Fox Body, but that's a completely different suspension setup and the selection for brakes, wheels, and tires are very limited.

@joeramirez9787 2 года назад

Anything yet for a 56 f100

@QA1TECH 2 года назад

Not yet! We may be able to make coil-overs/shocks work for your vehicle though. Give us a call!

@maxpain1947 3 года назад

So this wouldn't work for a 68 f250? I didn't think there was really any difference. Guess i am ignorant to it.

@QA1TECH 3 года назад

The frames are different enough that our system will not bolt onto the F-250 frame.

@maxpain1947 3 года назад

@@QA1TECH Well that sucks. Build one for a F250 pretty please.

@JackTulsen77 3 месяца назад

I have no doubt I'll have parts available for the CV decades from now. The QA1? QA1 is the only one who makes parts for the QA1 suspension. If I need a new control arm 30 years from now is QA1 going to have it?

@QA1TECH 3 месяца назад

We've been in business for 31 years and plan to be around for a long time! 😁

@JackTulsen77 3 месяца назад

@@QA1TECH Okay. Are you still going to be making parts for this in 30 years? I see no way you can guarantee that.

@PeterHatch-mx7zc 3 года назад

Price??

@QA1TECH 3 года назад

The front kit starts at $2999.95 through our dealers.

@PeterHatch-mx7zc 3 года назад

@@QA1TECH thank you!!!

@PeterHatch-mx7zc Год назад

Just put a p71 crown Victoria police interceptor front suspension in my 62 f100 did it for under a $1000 and that was with suspension fully rebuild ! I am good !just ask me

@Ironwind1972 3 года назад

Someone count how many times "umm" was said.

@larrywarren1049 3 года назад

How long yall been in business and how long yall been making this for chevy trucks yall probably got one for every gen of chevy but just now for a ford nothing against chevy and im all about capitalism but if companies took interest in ford n dodge lke they do for chevy id have no problem with buying from them instead of cashing in on someone else's idea when there wasn't a market and driving up the cost for the enthusiastic hobbyists

@travisdavis1601 2 года назад

Um um um

@MrAnaheimification 4 года назад

Umm umm umm umm

@bobadingo Год назад

So what is wrong with the I-beam suspension mine works perfectly fine and I get zero adverse tire wear and I've not messed with it for 35 years!! try that with your independent ball joint control arm suspension" so if I want race car handling I'll go buy a race car not waste my time and money trying to make an antique truck perform as good as a Corvette or a Lamborghini You must think logical people if you don't you're wasting your life away.. .

@bbkr7910 2 года назад

Nice suspension, but it's worthless for 16 years worth of Ford trucks.

@Dogman21 4 года назад

lol you got the worst vic front end you could find and the vic front end is cheaper then qa1 lol.

@QA1TECH 4 года назад

@spikeafrica 3 года назад

By the time you do coil overs, install, new bushings, rack replacement if needed etc .. you're going to be in the $800-1000 for something not as good and heavier. The vic swap has its place. But for the money the QA1 kicks ass.

@peterhatch1583 2 года назад

Ok how about helping me with your front suspension im in California why ! Im Australian Jewish Chinese Mexican @ make for a great video and you get the tax deduction!

@ronaldserocke9471 Год назад

Have you ever played back this presentation to yourself? Umm. Umm umm. How many times have you uttered that? I couldn't listen to you after 1/3rd because that is your most popular word. QA1 should have gotten a different presenter. Some one that doesn't have the. Ummm. Ummm. Umm problem.