Range Rover L322 Heated / Cooled Seat Diagnosis & Repair 

Great video. Thanks. I did this work yesterday on my driver's seat. One thing - if you put the seat all the way back and pull the bottom off the central console, which just takes a small tug, you can get to the otherwise inaccessible screw holding on the left hand trim.

Ordered a replacement peltier and corrugated unit from Klifex 11 days ago ,it has now arrived. I will see how it works when I fit it at the weekend. Hopefully back to having a heated set. Cheers

Cool vid !

Great info thanks, just got the same on my 2011 tdv8, strangely cannot find that diagnostics info on my GAP iiD. Have looked into every menu. Will be stripping it down to chec it. Cheers

Excellent video, my R seat (passenger this side the pond) is doing the same - fan will stay on if only the back is selected but no heat outthe back but a few seconds after selecting the bottom the whole seat shuts down. Time to pull out the multimeter and check it out. I've checked the plastic hoses and no cracks. Hoping the peltier just needs replacing.

Can you see a part number on the fan/peltier units please? Many thanks for doing this video.

Where on the id tool.was the seats temps can't find it

I really like your channel but I wonder if I can ask you one thing. I have an IID tool myself and as in this video you showed the relevent temperatures to diagnose the problem. Would you be able to find the time to show how to get to that screen from when the IID tool has started up?

Are the filters reusable? Do you just clean with soap and water like a sponge? Thanks for the video?

Hi mate this isn’t a question to the videos but you might know. Would the 2010 door cards fit a 2006. I like the new look and the buttons seem to all look the same

Great video, I have no lights that ever show on the controls, any ideas? Fuses checked. 2012 RR SC

How did you access the Advanced live data?? I can't find it in the iid tool. I hope you can help. Thank you.

Is it normal for it to take a long time to heat up I had cars in the passed with heated seat no problem heated up fast I do have a problem with the heated streeing wheels where it comes on for about a minute or 2 then gose off it won't come back on again unless I restart the vehicle.

My local mechanic replaced my drivers side, seat (bottom) had a rip. Since the replacement, heat doesn’t work on seat, but cool function does. Would it be best to just buy that used part you took off from the rear of the seat?

I have a 2007 that I am adding the heated/cooled seats and have everything in place, but where is the harness under the seat to plug the module. I have looked under the drivers and passenger front seats. In my 2010 there was a harness tucked under the front passenger seat. Any help?

Where did you find those values within the iid tool? Can’t for the life of me find them

Have you had any experience with fitting 2010 seats into a 2006? I’m trying to retro fit them in atm

So I was able to replace the plastic “connector” however seat is still not heating (back and bottom)… I might have to buy the peltier and replace?

Chap on full fat forum sells replacement peltier cells if I remember correctly

Hi I looking for wiring diagram for front seat can U help with ? Thx