REDTIGER HARDWIRE KIT (Install Prep, Connections & Fuse Taps Explained)

Подписаться 65 тыс.

Просмотров 118 тыс.

50% 1

I explain how the kit works ahead of installation to enable Parking Mode.
Links to kit below:
From Amazon
Hardwire Kit amzn.to/4aUHmSt (For F4, F8, F9, F17, T27, T700)
Hardwire Kit amzn.to/3VFLbFS (For F7N, F7NP, F7NS, F7N Touch)
Hardwire Kit (Extra Long) amzn.to/3Q406H8 (F7N, F7NP, F7NS, F7NT)
OBD Power Adapter amzn.to/3y6ys5M
Fuse Tap Kit amzn.to/3yZiJkN
Stripper Crimper Tool amzn.to/3l1cHut
Butt Crimp Terminal amzn.to/3wfVClz
Bullet Terminal Kit amzn.to/3wCoKE3
RELATED VIDEOS
How I find ACC and BAT in Car Fuse Box • Don't Install a Hardwi...
How to Install Fuse Taps • How to Install FUSE TA...
How to Hardwire Dash Cam • Don't Hardwire your Da...
How to Connect Dash Cam To Reverse Light • How to Connect BACKUP ...
RELATED VIDEO PLAYLISTS
How to Install Dashcam & Hardwire Dashcam Kits
• How to Install Dash Ca...
Traditional Dash Cams
• Traditional Dash Cams
Mirror Dash Cams
• Mirror Dash Cam Reviews
Heads Up Displays for Car
• Heads Up Displays for Car
OBD2 Car Scanners & Code Readers
• OBD2 Scanners Code Rea...
Backup Cameras & Side Cameras
• Backup Cameras, Side C...
Solar Generators & Power Stations
• Solar Generators & Pow...
Visit the AutoFun Store for cool merchandise! autofun.myspreadshop.com/
My Instagram / alexautofun
Chapters:
0:00 Intro & Main Features
1:49 Connections Explained
4:22 Fuse Taps Explained
6:51 Instruction & Final Thoughts
Disclaimers: Vehicle repair, service, modification or installation of aftermarket components should only be performed by a trained professional. Do not try this at home. Injury or Death can occur. I'm not a trained installer. Any action you take on the information on the AutoFun RU-vid channel and in the videos, contained therein is strictly at your own risk. Autofun makes no warranties on the accurateness of the information. This video description contains income earning affiliate links.

Авто/Мото

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 225

@AlexAutoFun 11 дней назад

Hi Everybody! If you have the USB C Hardwire Kit, here is my video for it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_1cIkR3YB-8.html Cheers!

@robtk3 10 месяцев назад

Exactly what I was looking for. I was back and forth regarding the "Single Fuse" kit and the "Double Fuse (with taps)" kit. However, my Mazda has limited spots of BAT in the fuse box so I'm getting the Redtiger "Double 4 Fuse" kit. Your video was the deciding factor. Even though I already was looking at the product on Amazon, I'm going to buy it through your link (and, hopefully, you get some commission). Tu vídeos sempre exelcente! Gracias mano!

@AlexAutoFun 10 месяцев назад

Thank you for supporting the channel Rob!

@lopeiaran3422 Год назад

Your video was the best one on RU-vid that explained everything easily, thank you!

@AlexAutoFun Год назад

You're welcome and thank you Lopeil Aran!

@GuyzLikeMe Год назад

Thanks for a very clear explanation on how to install & how to fix the hurtles we might run into!

@AlexAutoFun Год назад

You're welcome!

@cshajur Год назад

Thank you for the clear and detailed exclamation on how to use this product. This information will be useful when we install our lower front bumper after-market fog lights on my 2021 Toyota Corolla LE Sedan.

@AlexAutoFun Год назад

You're welcome cshajur!

@philkane4390 6 месяцев назад

Just bought a REDTIGER F7NP along with this HW kit for my Wrangler. Thanks for the vid, always great ones!

@AlexAutoFun 6 месяцев назад

You're welcome Phil and congrats on your new F7NP dash cam! Cheers!

@americanpatriot8996 5 дней назад

Just an FTI depending on what wrangler you have there are 6 accessory wires already there from factory. In the wrangler JL with the accessory switches they give you 6 wires in the engine bay and 6 wires under the foot well of the passenger side. So I installed my hardwire kit inside the vehicle and works like a charm. Just an fyi it makes it much easier.

@philkane4390 5 дней назад

@@americanpatriot8996 I have a 2024 Sport S. Man if I can install inside under the foot well that would be great! I'll check more on that.

@enfield7123 Год назад

Another good video 🧐 I got a E_ACE, reversing camera mirror cheap and cheerful.. but after a year decided to get another with all the fancy gadgets it was in my car for 3 months and it did my head in So now it's in the back of my garage and I put my cheap one back ..

@AlexAutoFun Год назад

Thank you Enfield! Ah yes the E-Ace, I haven't tested that one yet but so far I had good results with the Veclesus version here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-67MZ7dpYd_g.html may have to add a review for the E-ace later in the future. Cheers!

@cinemageek 10 месяцев назад

Thank you so much for this video! This makes the whole process make so much sense! Thumbs up! 🎉

@AlexAutoFun 10 месяцев назад

You're welcome!

@EventHorizon123 6 месяцев назад

I just bought rhis kit and red tiger F7PN i will be hard wiring in my 2020 subaru outback. Your video was extremely helpful.

@AlexAutoFun 6 месяцев назад

Thanks EventHorizon, glad to hear it helped, Cheers!

@izzymoney85 Год назад

Thanks a bunch for this helpful tutorial for this Hard wire kit keep up the great work man

@AlexAutoFun Год назад

You're welcome Esmar and thank you!

@raissadiv343 Год назад

😅😅I . U.

@RazoE Год назад

Great video, even better mustache 👍🏻

@AlexAutoFun Год назад

Thank you RazoE! I appreciate that bud!

@billhattori3034 3 месяца назад

Great instruction and commentary. More willing to attempt this myself now. Thanks!

@AlexAutoFun 3 месяца назад

Thank you Bill, Cheers!

@tschuler9923 25 дней назад

Great info . And i love the "POP" when demonstrating pulling a fuse 😃

@AlexAutoFun 25 дней назад

Lol thanks T!

@bazcharlie4680 6 дней назад

Yr installation videos are no nonsense straight forward and informative greatly appreciated 👍 thankyou

@AlexAutoFun 5 дней назад

You're welcome and thank you!

@pradeepb1277 4 месяца назад

One of the best video i have seen in RU-vid

@AlexAutoFun 4 месяца назад

Thank you Pradeep!

@BLINDEYE 6 месяцев назад

such a well explained video thank you so much for the help

@AlexAutoFun 6 месяцев назад

You're welcome and thank you!

@CJL-Land Год назад

Hi. Thank you for your very helpful and informative video. Finally realised I was needing a Fuse Tap to correctly install & use my RedTiger Dashcam & Hardwore Kit. Are the soldered Fuses on the hardwire kit 15A for both the ACC and BATT wires?

@AlexAutoFun Год назад

Hi Chris! correct, the molded on fuses are soldered to the kit (underneath the molding) Here is my follow up video on how I replace this molded fuses with actual functional fuse taps ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html Cheers!

@christinartnd Год назад

I've watched all of your cameras for the red tiger F7NP - thank you fo being So detailed. however Im having LOTS of trouble installing it and I think I need to send back the entire camera - I have a brand new car - i've done all of the correct fuse checks and even had a dash cam fitter look at the car, but it seems that the redtiger hardware kit is turning the camera off once the inigition turns on, as it falls under 12v but then it doesn't turn the camera back on again. I tried an old nextbase camera that I also have, which only has a red hardwire cable and this works, turns on and stays on. but I cannot get the redtiger camera to work when hardwired. Do you have any suggestions?

@AlexAutoFun Год назад

Hi Christina! That is very strange, specially if you had a installer verify the connections, maybe a bad hardwire kit? I would recommend contacting RedTiger for support, I'm sure they can walk you thru some troubleshooting steps. Hope this helps and please let us know what you find. Cheers!

@user-DODOZ Год назад

They should have included the inline fuses in the wires, as the given fuses will only be for replacement of factory fitted fuses leaving the dashcam hardwire without any fuse as most people while installing hardwire don't bother about polarity of fuse taps and fuse sockets. And if some how they get the right polarity it will put double load on the single fuse as it will be providing power for both dashcam and default device.

@AlexAutoFun Год назад

Hi DODO! correct, the kit unfortunately assumes that both ACC and BATT will be connected to unused spots on the car's fuse box (and also assumes the fuse size will be a Mini size) If the kit is connected to a fuse spot that is already occupied, the use of functional fuse taps shown at 4:22 is needed to ensure both the original fuse is retained along with the fuse for the hardwire kit. I keep telling dash cam manufacturers to improve this (AZdome does it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FLcIM2MwAL8.html and also Rove ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9Pq3UKQNrcU.html with their awesome Ultimate hardwire kit) Hopefully one day they will listen! LOL Cheers Bud!

@khalilrazak6486 Год назад

Exactly, especially for how much it costs. There are third party ones which are cheaper and include the inline fuses but Redtiger doesn't recommend using third party hardwire kits, I wonder why!

@AlexAutoFun Год назад

@@khalilrazak6486 Hi Khali! yeah that is the one major weakness I seen on dash cams, the dash cams themselves are fully loaded with features but their hardwire kits leave something to be desire. So far only Rove has he most complete hardwire kit I ever reviewed ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ny-TvRnhTs4.html but again as you mentioned, using the matching hardwire (made by the same brand as dash cam) is the what I also recommend to avoid issues both technical and warranty ones. Hopefully one day will we see more manufacturers create better kits like the Rove one. Cheers!

@andersonammelo 4 месяца назад

Very well explained video. Thank you!

@AlexAutoFun 4 месяца назад

You're welcome and thank you Anderson!

@jimmynguyen2628 11 месяцев назад

You are very detailed 👌 🤝😌

@AlexAutoFun 11 месяцев назад

Thank you Jimmy!

@user-vh9hs4qe7r 7 месяцев назад

👍👍💯 thank you very well explained

@AlexAutoFun 7 месяцев назад

You're welcome and thank you Lance!

@user-cx8fq3eb6v 6 месяцев назад

I just bought exact same kits for my Subaru forester

@X.8.f Год назад

Thanks so much for your videos. Just a question - I could not find a hard wire kit for my T27, can I use the kit of the T700 to power my T27?

@AlexAutoFun Год назад

You're welcome Ali! Ah yes the T27 hardwire is readily available from Amazon or from RedTiger, I put links to both sources in the video description. Hope this helps, Cheers!

@EventHorizon123 6 месяцев назад

Thanks!

@AlexAutoFun 6 месяцев назад

Thank you for supporting the channel EventHorizon!

@vinesco5270 Год назад

Does the amperage of the fuse on the fuse tap have to match the amperage of the fuse you took out? My kit came with a 15A fuse on the fuse tap, but the fuse im taking out is 7.5A. What should I do?

@AlexAutoFun Год назад

Hi Vin! ah yes I have a detailed video covering this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K2iKXj82354.html Hope this helps, Cheers!

@fisherbrown903 5 месяцев назад

For parking mode. Use

@AllThruChrist 11 месяцев назад

Very great.

@AlexAutoFun 11 месяцев назад

Thank you 440steel!

@claudeb.3473 9 месяцев назад

Thank you, this was very educational. The sound effects are great, too. 😀

@AlexAutoFun 9 месяцев назад

You're welcome Claude!

@chloropheneramine6593 3 месяца назад

Superb explanation

@AlexAutoFun 3 месяца назад

Thank you!

@federicoeduardolopezdiaz2703 Год назад

Hi do you think I can connect my dash cam Hotwire on a Honda accord sport 2017?

@AlexAutoFun Год назад

Hi Federico! Yes most dash cams support a hardwire kit. Here is my hardwire video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html the techniques shown on that video can be applied to any vehicle including the Honda Accord. Cheers!

@Lydiadragonbourne 2 месяца назад

Thank you!

@AlexAutoFun 2 месяца назад

You're welcome Lydia, Cheers!

@jaredjason8 Год назад

hello i have a hardwire kit that is 20awg but my fuse taps that i need to connect too the wire is 16awg. what can i do or can i just connect them?

@AlexAutoFun Год назад

Hi Jared, here is are some IDC connectors with the range you are looking for amzn.to/44OkIYl Cheers!

@carlomemmolo3337 11 месяцев назад

are you near newhampshire,i have problems where phone wont exept codes or icon scanned

@AlexAutoFun 11 месяцев назад

Hi Carlos! Not sure which dash cam you are using but remember the T27 and T700 do not support connecting to your phone. You can also contact RedTiger for support, they may be able to walk you thru some troubleshooting steps. Cheers!

@sempai940 5 месяцев назад

Great video, however I cannot isolate a fuse to install the battery cable in a 2023 CRV Honda. Can you help?

@AlexAutoFun 5 месяцев назад

Hi Angel! Here is my follow up video where I cover how I find ACC and BATT on any car ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K2iKXj82354.html However I strongly recommend profession installation due to the dangers mentioned on that video if erroneously tapping a critical system of the vehicle and the dangers involved with air bags mentioned on this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html Cheers

@KDR195 Год назад

Hi - I’m going to be installing red tiger into a f15 x5 and the fuse that I’ll be removing and adding to a fuse tap are 5amps each for acc and batt. What fuse amp does the red tiger require for acc and batt? I dont have any space in my fuse box. Thanks in advance!

@AlexAutoFun Год назад

Hi Kelvin! Ah yes the fuse for the hardwire kit I used, is of the same value as what came with the kit. In this case as you can see in the video the kit came with a blue fuse (15A), so I used a 15A fuse on the functional fuse tap. Cheers!

@KDR195 Год назад

@@AlexAutoFun thanks for replying!!! Do you think instead of a 15A fuse red tiger cam would be ok with a 5A fuse?

@AlexAutoFun Год назад

@@KDR195 Yeah I had other viewers used a lower rated AMP fuse (so it can pop earlier) However just remember that deviating from the included AMP spec may impact warranty if something goes wrong in the future since we are deviating from the factory kit. Hope this helps, Cheers!

@userx76y 11 месяцев назад

what is maintainance for the hard wire? i actually afraid low volt not cranking on standard liquid old car battery

@AlexAutoFun 11 месяцев назад

Hi Clovax! The hardwire kit is sealed and does not require maintenance. Here is is my other video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html where I explain how the hardwire kits work and the different features to look for when buying one (including the low voltage cut off). Cheers!

@karenmoore4315 9 месяцев назад

What if your hardwire kit only has the red and black but DOES have the shut/off device for the voltage? Will it still work in parking mode?

@AlexAutoFun 9 месяцев назад

Hi Karen! This will depend on your dash cam, most require their matching hardwire kit and using a different kit may not work correctly. Cheers!

@paulroberts6697 Год назад

Hi can you tell me what is the fuse rating in amps of the links fitted to the hard wire kit for the G900. Mine are coloured blue. Blue fuses are normally rated at 15 amps . I want to fit my red and yellow wires with in line fuse holders as I wish to tap into another circuit on my Landrover. What size fuses should I fit? 15 amp seems a rather high value.

@AlexAutoFun Год назад

Hi Paul! Correct, the fuses that come with the G900 hardwire kit are blue (15A). And here is my hardwire install video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html Cheers!

@paulroberts6697 Год назад

Many thanks for your quick reply. Your videos are excellent.😊

@AlexAutoFun Год назад

@@paulroberts6697 You're welcome and thank you Paul!

@sxpress 6 месяцев назад

Hi, nice video thank you.. there might actually be a jumper inside to change the voltage cut off?

@AlexAutoFun 6 месяцев назад

You're welcome Sxpress! Ah I have not cracked this one open like the I did to this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RoiQ-Xvr09M.html which was reversible since it has screws. But since the RedTiger kit is sealed, opening it would require prying apart (breaking into) the case. I don't believe there is a jumper like the Garmin one has but if I ever do break one open and confirm, I will update this comment for you. Cheers!

@sxpress 6 месяцев назад

👍@@AlexAutoFun

@swapnilpx 9 месяцев назад

Can the Redtiger F7N hardwire kit be used with Wolfbox G840H dashcam ?

@AlexAutoFun 9 месяцев назад

Hi! I do not recommend mixing up hardwire kits, here is the hardwire kit for the G840H amzn.to/3DylNIB Cheers!

@Unplugged704 5 месяцев назад

Question- If I hardwire for power all the time, why is there a need to connect to the ACC?

@AlexAutoFun 5 месяцев назад

Hi Unplugged! Ah good question, ACC provides the signal that the car is On or Off which makes the dash cam turn On or Off for you with the car (and also trigger parking monitoring if enabled on the dash cam). The 3rd wire (BAT) is used to maintain power to the dash cam while the car off. And here is my follow up video where I explain how hardwire kits work and their different features to look for when shopping for one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html Cheers!

@zendrith5018 6 месяцев назад

I really want to get the RedTiger hardwire kit to use with my RedTiger camera. my only issue is that the version of the camera i have is Micro USB and I cannot find that version of the kit online anymore. Would it be worth it to buy their USB-C kit and splice the Micro USB from their car charger onto it, getting a USB-C to Micro USB adapter, or getting an entirely different kit be the best move? I think cutting the USB-C head off the new one and soldering a Micro USB head from the car charger i have from them would be the more fun move (the bottom of my car charger from them also shattered and i cant find the pieces anymore so its dead at this point to me)

@AlexAutoFun 6 месяцев назад

Hi Zendrith! Ah I got the same version too! lol yes the Micro-USB hardwire kit has been replaced with the USB-C. I normally recommend sticking to the matching hardwire kit for your dah cam but in this case I can see why an alternative may be needed, here is one that may work amzn.to/3NBqLcD but yes if you are experienced with electronics, swapping out the connector on the new USB-C one to a Micro-USB is definitely possible (and yes it could be fun depending on if you enjoy working and soldering small electronic components like I do LOL). Cheers!

@darelord Месяц назад

Is it ok if I attach kit's plug directly to fuse tap hole (the upper) without attach to fuse tap's cable? I think the hardwire kit plug already has fuse itself.

@AlexAutoFun Месяц назад

Hi Dare! I personally don't like to connect the hardwire molded fuse into a fuse tap, because I don't like how high the assembly gets when stacking the molded fuse from the hardwire kit into the fuse tap and then having to deal with cutting and shutting off the unused pigtail so it does not contact anything (here is the video where I show this ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wAad_JA7kz8.html at the 9:55 mark for those wondering what that looks like) Cheers!

@jonnylee8538 Год назад

Hi, are the fuses soldered with the hardwire kit working ones or just as a plug? If they are, how many Ampere are they?

@AlexAutoFun Год назад

Hi Jonny! Correct, they are standard 15 AMP (blue fuses) Cheers!

@jonnylee8538 Год назад

@@AlexAutoFun Thanks, I thought they were 15A.

@AlexAutoFun Год назад

@jonnylee8538 Hi Johnny! Correction, you are right, I typed too fast lol they are 15A. Cheers!

@skudlugs Год назад

what about using obd2 adaptor for power?

@AlexAutoFun Год назад

Hi Shaun! Correct, the OBD2 adapter is able to power some dash cams, here is my full video for it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YEklm9V6xYE.html Hope this helps, Cheers!

@andytooturnt 2 месяца назад

how do you know what number/size the new fuse has to be?

@AlexAutoFun 2 месяца назад

Hi Andy! Notice they are using blue fuses which means they are 15A (if the molding is removed the fuses, the fuses are also marked with 15A). Cheers!

@gtzrg Год назад

IM ASSUMING YOU DONT NEED THE HARDWIRE KIT IF YOU HAVE A CAR THAT PROVIDES FULL TIME POWER WHEN CAR NOT RUNNING? (OLDER CARS)

@AlexAutoFun Год назад

Hi Raul! The hardwire kit is only needed if you are looking to enable park monitor on your dash cam or if you do not want to tie up your cigarette lighter port with the charger. Hope this helps, Cheers!

@turdferguson1521 Год назад

What do you do if the fuse box has no empty spots ?

@AlexAutoFun Год назад

Hi Turd! Here you go ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html Cheers!

@piotrwiniarski3310 10 месяцев назад

I have the hardwire kit from red tiger f7n dashcam. in my fuse box I have few empty slots but they have only 1 steel connect, apper or on the bottom. I was do so measure and I have the power when the engine ist turn of and when the key ist on. but the parkingmod don't want running. thank you for your help and great video and great job.

@AlexAutoFun 10 месяцев назад

Thank you Piotr! Ah yes here is my video showing how I find ACC and BATT on any vehicle ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K2iKXj82354.html And here is my follow up video showing the rest of the install including some of the dangers involved with air bags when running the dash cam cables ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html And yes you can turn off Parking Mode in the settings menu if you don't need it. Here is my video showing how to use the dash cam ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K7qURDfoR7c.html Cheers!

@piotrwiniarski3310 10 месяцев назад

thank you for quick answer. but my question is or the hardwire kit can working with empty slot with single connector?

@AlexAutoFun 10 месяцев назад

You're welcome Poitr! Ah regarding your question, nope, most dash cams that require a 3 lead hardwire kit will usually need all 3 wires (ACC, BATT and GND) to be connected in order for the dash cam to work correctly. Here is is my other video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html where I explain how hardwire kits work and the different features to look for when buying one. Cheers! @@piotrwiniarski3310

@piotrwiniarski3310 10 месяцев назад

I think my question was wrong. in a fuse box I have empty slots with single connector and I was plug in the hardwire kit w with 3 cables exactly like you show us. the real question is or can that working with single connector in empty slot in fuse box? because normal fuse has 2 connectors one ist at the bottom and one ist at the top, if I can say that...

@AlexAutoFun 10 месяцев назад

Hi Piote! Correct, if there is a empty fuse slot available that is my preferred way of doing the connection, you can see an example of that install here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html and here is my other video where I explained where fuse taps with two fuses or single fuse are needed ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html Cheers!

@shelikesjustthat431 10 месяцев назад

im on my daughters profile by the looks but ill ask anyway, just wondering why or if it would work by cutting the twin fuse link wire short and insulating it then plugging in the already fused wire from the dashcam and the fuse that came from the fuse box into the twin link then plugging it back into the fuse box slot to save time? I think it will work and will be checking it out tomorrow but probably wont cut it short just incase the dashcam fuse blows I can then join and get a fuse. ok ok saying it like that kinda makes me think why stuff around. thanks Max :)

@AlexAutoFun 10 месяцев назад

Hi! Fuse taps are only required when tapping into a fuse spot that already has a fuse in it. Here is my other video where I explain when fuse taps are needed ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html And here is my other video where I explain hardwire kits and their differences to look for when buying one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html Cheers!

@servicecar7916 6 месяцев назад

Hello my friend, thank you for the video, but upon installation the video appears 24 hours a day quickly. Is there an option for that?

@AlexAutoFun 6 месяцев назад

Hi Service! Sounds like you have enabled "Time Lapse" if you want regular video recording, I would recommend turning that function off. Cheers!

@dariocurseri6736 Год назад

Buongiorno ho acquistato la dashcam t 27 con il kit per il monitoraggio del parcheggio 24 Ore su 24. Ho fatto installare il tutto all'elettrauto. Il monitoraggio del parcheggio è comunque possibile decidere se attivarlo o disattivarlo in modo che non registri? Se si in che modo? Grazie

@AlexAutoFun Год назад

Hi Dario! correct if the hardwire kit was installed correctly there will be a new option in the menu where you can choose park monitoring using the G-Sensor or Time Lapse. I do have a video explaining how to setup the parking mode on the T27 next week. Stay tuned for that one, Cheers!

@dariocurseri6736 Год назад

Perfetto grazie mille!

@abhinavg3514 23 дня назад

So you cannot place the ACC terminal which you're supposed to put in an empty slot in the fuse box into the fuse tap, you're supposed to cut the wire, attach it to the fuse tap wire, buy and place another similar fuse and then use it?

@AlexAutoFun 23 дня назад

Hi A! Fuse taps are only used in some cases, here is my video where I explain this in more detail ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html Cheers!

@danev6972 4 месяца назад

I have the REDTIGER F7N 4K Dual Dash Cam. Amazon has a single fuse and double 4 fuse option. What is the difference. Thx.

@AlexAutoFun 4 месяца назад

Hi Danev! The single fuse one includes molded fuse as shown on the video. The Double Fuse, has replaceable ends (fuse taps) which are needed in some of the cases described on the video. And here is my follow up video that covers when fuse taps are needed in more detail ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html Cheers!

@rcharger007 Год назад

Ever had an instance where the yellow B+ when connected starts up the camera, but then the camera immediately loses power? If the car is started through the ACC the camera stays on with no problem. Having this issue currently with a Subaru Ascent 2022

@AlexAutoFun Год назад

Hi Ray! I would have the installer check the install, checking that the car fuse spot still has power at the correct time (both for ACC and BATT) I seen cases where the car will turn off power to particular systems (specially in ECO mode, hybrid and EV vehicles) in to maximize fuel efficiency. Here is the video for how I find and test for ACC and BATT ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K2iKXj82354.html If the both fuse spots for ACC and BATT have power at the correct time, I would also recommend contacting RedTiger for support, maybe just a bad hardwire kit? they may just swap it for you, or guide you thru some troubleshooting steps. Hope this helps, and please let us know what you find. Cheers!

@rcharger007 Год назад

@@AlexAutoFun spoke with support and the issue turned out to be a bad hardware kit. New kit is working fine! Camera came right on and goes in to parking mode without issues

@AlexAutoFun Год назад

@@rcharger007 Awesome! Thank you for keeping us posted too! 🍻

@pierroalino Год назад

Hi mate. Thank you for the video. May I ask a question about the setting please? I have a fun since yesterday and the hardWire kit. I juste found the food spot to plug the red and yellow wires but I get a message saying use the acc wire kit when I try to use the parking mode .... .. And when I torn the ignition key all works perfect but when I turn it off it say ACC off then off Do you have any idea on what I could do to fix this please? Thanks regards

@AlexAutoFun Год назад

Hi pierroalino! I would have the installer check all the connections (ACC, BATT & GND) to confirm nothing has come loose and that they connected to the correct locations for ACC and BATT (I seen cases where park mode is not enabled if ACC and BATT are reversed or connected to the incorrect locations that does not provide power at the correct time for both ACC and BATT) Hope this helps, Cheers!

@pierroalino Год назад

@@AlexAutoFun hi I contacted redtiger and they helped me figure out how to solve my problem. I just had to replugged the red wire into a another fuse slot and now it s all working fine. Thanks for you answer have a good day

@AlexAutoFun Год назад

@@pierroalino You're welcome and glad to hear it's working now. Cheers!

@haych9803 Год назад

If you want the dash cam to function only when ignition is on , and turn off when ignition is off (to save car battery) can you just use the accessory fuse wire and ignore the battery wire ?

@AlexAutoFun Год назад

@@haych9803 Hi Haych! The dash cam will turn off when the ignition is off and turn on when the car is On when connected correctly with the 3 lead hardwire kit (If additionally you don't need parking monitoring, most dash cams will let you turn it off in the settings menu) Hope this helps, Cheers!

@mmagen14 Год назад

Can please do dash cam Hotwire on 2020 Corolla?

@AlexAutoFun Год назад

Hi Megan! Here is my hardwire video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html Cheers!

@mr.boniato6402 Год назад

How come when I connect only the ACC cable in the cigarette lighter fuse slot without connecting the BA+, the camera won't turn on when the car is on.. I have to ALSO connect the BA+ along with the ACC wire.. why is that? Why can't I just plug the acc wire and only use it on acc mode?

@AlexAutoFun Год назад

Hi Mr. Boniato! most dash cams that use a 3 lead hardwire kit require all 3 leads to be connected in order to function (ACC, BAT & GND). Hope this helps, Cheers!

@mr.boniato6402 Год назад

@@AlexAutoFun Thank you..when using the cigarette lighter as acc, do I need to have two fuses, one for the kit and one for the lighter, or is the one from the kit enough to power the lighter and the camara?

@flonga1 Год назад

I have a 2008 4Runner, should I get the double fuse or single fuse?

@AlexAutoFun Год назад

Hi! The need for a functional fuse tap will depend if there are empty fuse spaces (both ACC and BATT) on the vehicle, here is my video where I explain when functional taps are needed ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html and here is video showing the actual installation ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html Cheers!

@flonga1 Год назад

@@AlexAutoFun THANK YOU!!!!

@AlexAutoFun Год назад

@@flonga1 You're welcome!

@opawchicago2602 9 месяцев назад

Hi,this works with any dashcam brand?thanks

@AlexAutoFun 9 месяцев назад

Hi Opaw! While I may be possible to use a different hardwire kit on a dash cam, I usually recommend sticking to the matching hard wire for the dash cam (brand matching) to ensure that there are no functional issues or issues with warranty coverage. Here is my video where cover hardwire kits and their differences in more detail ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html Cheers!

@vipulpatel2544 Год назад

How can i install redtiger hardwired kit in toyota sienna 2023 model?

@AlexAutoFun Год назад

Hi Vipul! Here is my hardwire installation video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html Cheers!

@javiersalas7670 8 месяцев назад

So will it not function or record once the battery voltage gets below 11.8?

@AlexAutoFun 8 месяцев назад

Hi Javier! Correct, the low voltage cut off is meant to stop the hardwire kit from powering the dash cam when the battery voltage reaches the cut off point to reduce the possibility of draining your car's battery. Cheers!

@javiersalas7670 8 месяцев назад

@@AlexAutoFun Thats not good I bought one for parking security....mainly for that reason only

@AlexAutoFun 8 месяцев назад

Hi Javier! Most name brand hardwire kits have a low voltage cut off to reduce the possibility of draining your car's battery and leaving you stranded. There are a few basic hardwire kits out there (cheaper) that do not have that function and will stay on all the time at the expense of the car's battery being drained. So while it is possible to do so I personally do not recommend it. Most healthy batteries will stay above the cut off point so I personally always use hardwire kits with low voltage protection. Cheers! @@javiersalas7670

@fisherbrown903 5 месяцев назад

Can i wire b+ direct into battery terminal +. Not the acc wire

@AlexAutoFun 5 месяцев назад

Hi Fisher! ACC and BATT need to be connected to their correct locations (ACC and BATT are separate functions, here is my video where I cover this in more detail ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K2iKXj82354.html ) in order for parking monitoring to work correctly. If ACC or BATT is connected to a source of power that does not provide ACC or BATT power at the right time, the dash cam may not work, parking mode may not work or the dash cam could stay On all the time. Cheers!

@fisherbrown903 5 месяцев назад

@@AlexAutoFunvery hard to access for camry toyota. Under the steering wheel

@AlexAutoFun 5 месяцев назад

@fisherbrown903 Hi Fisher! I don't doubt it. That is one of the reasons I recommend professional installation. In addition to the time invested in trying to learn the process for a single install, some installs are also physically demanding, I lost count of how many times I had to twist myself into a pretzel to reach the work area. There's also sharp areas of the trim of the car or the sheet metal itself, so it's usual that my hands are cut left to right LOL. I gotten good at it (like all installers do after hundreds of installs), but this experience won't be developed on a single install. Cheers!

@fisherbrown903 5 месяцев назад

@@AlexAutoFun yes. Very hard for toyota. Under steering hard to access

@jrshields683 10 месяцев назад

I need a video that tells me where to get a hardwire kit for a Low Profile fusebox (2021 Lexus NX).

@AlexAutoFun 10 месяцев назад

Hi JR! Here are the low profile fuse taps amzn.to/3yZiJkN and here is my hardwire install video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html Cheers!

@piciux2323 4 месяца назад

i had my redtiger camera hardwired by an electician for me and after almost 2 days of using the camera 24/7 i wonder if it`s normal for the actual dash cam to be warm/hot and if is there any chance of catching fire or i shouldn`t be worried about it ?

@AlexAutoFun 4 месяца назад

Hi Catalin! Dash cams normally run warm to hot (and very hot if running it in 4K). And while I had not had any of them catch on fire yet, if you are looking to reduce their temperature here are some suggestions. Reduce resolution (lower resolutions produce less heat), reduce bit rate (some dash cams will let you change it) and finally enable screen saver (screen time out) which will turn of the display after a period of time but will continue recording (the screen itself generates heat). Cheers!

@piciux2323 4 месяца назад

@@AlexAutoFun thank you, I just did all that, feels a bit better, still warm tho' I'm just worried because I just had a new car and installed this dash cam and the hardwire kit and I'm worried about it being always warm/hot and what this can do in the long term.

@AlexAutoFun 4 месяца назад

@piciux2323 You're welcome! It would also be a good idea to have your installer check the install. I seen cases where something was incorrectly connected or the wrong hardwire it was used (or a defective hardwire was installed) etc. Cheers!

@lawrencewood-norman6479 5 часов назад

@AlexAutoFun Can I use this kit for another Dashcam mirror that uses a Type C port, or is it just for Red Tiger?

@AlexAutoFun 2 часа назад

Hi L! While I may be possible to use a different hardwire kit on a dash cam, I usually recommend sticking to the matching hardwire kit for the dash cam (specified by the brand) to ensure that there are no functional issues or issues with warranty coverage. Here is my follow up video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html where I explain how hardwire kits work and the different features to look for. Cheers!

@samuelflores8961 2 месяца назад

will this protect my cars battery and alternator?

@AlexAutoFun 2 месяца назад

Hi Samuel! Typically hardwire kits do not affect alternators (but I would recommend checking with your mechanic to confirm the effects of adding aftermarket equipment to your vehicle). But yes as explained in the video, it does have low voltage protection to reduce the possibility of draining your car's battery. Cheers!

@user-DODOZ Год назад

I think wolfbox and redtiger are part of same parent company, both have similar type of hardware and app.

@AlexAutoFun Год назад

Hi DODO! That's correct, RedTiger is a Wolfbox brand 🙂

@user-DODOZ Год назад

@@AlexAutoFun Thanks for making such detailed informative videos, we appreciate your hardwork🤗

@AlexAutoFun Год назад

You're welcome 𝑫𝑶𝑫𝑶! Glad to hear they helped 😊

@abbottgirl82 Год назад

Hello - I've just had my unit installed at an audio shop and he told me that I need to read my manual when I go home because when trying to access the Parking Mode, he gets an error stating, "please connect the acc power kit" which is what he's done so what do I do now?

@AlexAutoFun Год назад

Hi Zurai! I like to start by saying (no disrespect to the shop that installed it) but any shop that tells a customer to go home and read to manual to figure it out, man that kind of customer service upsets me and I would definitely not go back to that place. That being said, I would have the installer confirm all connections to confirm they are connected to the correct locations for ACC and BATT (I seen cases where the connections for ACC and BATT are reversed or connected to the incorrect locations that do not provide power at the correct time for both ACC and BATT leading to the kit not working correctly). I also seen cases where a shop joined both ACC and BATT together to save time causing the issue you are describing. In rare cases you may also have a defective hardwire kit (or incorrect hardwire kit installed by the shop) which again your installer can confirm for you. Lastly you can also contact RedTiger for tech support, they may be able to walk you thru some troubleshooting steps. Hope this helps and I hope the shop comes thru and helps you my friend, Cheers!

@ronleon62 2 месяца назад

They now sell kits with several differ fuse taps included.

@AlexAutoFun 2 месяца назад

Hi Ron! Correct, the kits have been updated, most now come with fuse taps (links to the kits in the video description) Cheers!

@wolvoman1 2 месяца назад

Thanks for an informative video, however i could never understand branding it as '' RedTiger'' ?

@AlexAutoFun 2 месяца назад

You're welcome Mike! Ah yeah I see so many brand names (sometimes using terms related to the product and sometimes totally unrelated) and I always wonder the same LOL There was a couple ones that were a little extreme too, there was one that almost sounded like an expletive (not when read only when pronounced) and I had another that sounded like a different term that what the brand intended (again, not when read only when pronounced) and there are some I have not even figure out how to pronounce them since they are made up words. Cheers!

@yellowgreen2378 Месяц назад

Does it drain the battery too much?

@AlexAutoFun Месяц назад

Hi Yellow! Ah good question, that will depend on the car's battery, size, age, health condition and state of charge. In addition to that you also want to take in consideration any parasitic draw from other items on the vehicle that use power when the car is off. This is specially common on newer vehicles. For example I have an older Jeep that can sits for months a time with little to no battery draw, then I have a 2017 car that will almost completely drain my battery in a few weeks if the car is not used (and that car does not have any aftermarket devices connected to it). Here is the battery tester I use ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kCNrfa8RUKU.html if you want to test your battery for capacity and health, it can also perform a parasitic draw test if needed. I do carry one of this on long trips ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5eoewaav43A.html just in case but again I think my case is a little more extreme since most people only run 1 hardwire kit at a time and I run several kits on my car. Cheers!

@albertomedina193 3 месяца назад

Can I use this kit for a headunit (carplay screen) ?

@AlexAutoFun 3 месяца назад

Hi Alberto! This is kit is specific for the dash cam models listed by Wolfbox (link to the kit in the video description). I do not recommend using it differently. Cheers!

@albertomedina193 3 месяца назад

@@AlexAutoFun Thank you for your fast response. You just earned another subscriber. If you have any recommendations for a hardwire kit that I can use for a carpuride headunit, I would greatly appreciate it.

@AlexAutoFun 3 месяца назад

@@albertomedina193 You're welcome and thanks for supporting the channel Alberto! Ah unfortunately, Carpuride does not have a hardwire kit, they typically use 12VDC, so there is no step down regulator in their power plug assuming your Carpuride system is like this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oHlf0MmguWk.html You can see how the power input is labeled 12V so what installers do in those cases where the customer requires a hardwire connection is either cut the cigarette lighter plug and tap the system directly to the car (with fused connections) or they install a generic cable with the same DC barrel plug which again is connected to the car's power via a fused connection. Cheers!

@albertomedina193 3 месяца назад

@AlexAutoFun you are the Man. Thank you!!!

@AlexAutoFun 3 месяца назад

You're welcome Bud!

@davidserban3747 Год назад

Him mate yu sayd to live în description link woth the fuse plug ant test plug

@AlexAutoFun Год назад

Hi David! Correct, I put links in the description to the hardwire kit and fuse taps if needed. Hope this helps, Cheers!

@vincentlee2460 3 месяца назад

The 2 fuses value into the piggy peg wire must add up to the original single fuse value. Otherwise you are increasing the ampere allowed and might cause a fire.

@AlexAutoFun 3 месяца назад

Hi Vincent! Ah remember a functional fuse tap creates 2 separate independent circuits (each one with a different amp rating partially determined by fuses that are loaded into the each fuse slot in the fuse tap, the car's internal wiring and current load on the circuit to be tapped) The fuse removed from the car goes in the fuse tap bottom slot and the second fuse (top fuse) is for the hardwire kit. So they are each independent of each other, each one driving it's own load. Here is another video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html where I explain how fuse taps work in more detail, Cheers!

@vincentlee2460 3 месяца назад

@@AlexAutoFun i was wrong. The 12 volt is split and the fuses are not in series. I just confirmed with a DMM and the same wire.with 2 fuses

@AlexAutoFun 3 месяца назад

@@vincentlee2460 That is a great way of explain it, I actually have a video on the works covering the internals of them because as simple as this little guys are, sometimes it helps to see the inside of something to understand it, but I like your idea of the DMM demonstration. Cheers Vincent!

@bentenxl 4 месяца назад

I wonder if this works with the 70mai dash cam..

@AlexAutoFun 3 месяца назад

Hi Ben! While I may be possible to use a different power adapter on a dash cam, I usually recommend sticking to the matching power adapter for the dash cam (brand matching) to ensure that there are no functional issues or issues with warranty coverage. Here is my follow up video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html where I explain how hardwire kits work and the different features to look for. Cheers!

@bentenxl 3 месяца назад

@@AlexAutoFun Thank you bro! i actually am switching to a wolfbox dash cam! thanks to one of your vids btw :D!

@AlexAutoFun 3 месяца назад

@@bentenxl You're welcome! 🍻

@jonathanshim282 8 месяцев назад

If I don't want the constant power (parking mode) enabled, do I simply not plug in the constant power fuse? or does that need to get plugged in regardless?

@AlexAutoFun 8 месяцев назад

Hi Jonathan! Most dash cams that require a 3 lead hardwire kit will usually need all 3 wires to be connected in order for the dash cam to work correctly. What I recommend when someone does not need park monitoring, is just to turn it off in the settings menu (most dash cams will let you turn off this feature). Cheers!

@Unplugged704 5 месяцев назад

Like me, I just want to run camera when I’m in the car-driving. I feel I can just use the cigarette lighter. What is the pro of hardwiring if I just use the camera when driving?

@AlexAutoFun 5 месяцев назад

Hi Unplugged! Typically the only advantages of hardwiring is that it frees up your cigarette lighter port and it can also enable parking mode. Cheers!@@Unplugged704

@Unplugged704 5 месяцев назад

@@AlexAutoFun Thank you!

@AlexAutoFun 5 месяцев назад

You're welcome!@@Unplugged704

@Leinsterbaby Год назад

Noticed you don't have anything on Kenwood cameras, they have a funny hardwire kit, with just 1 fuse connector + ground :D

@AlexAutoFun Год назад

Hi Goose! Ah yes the 2 lead hardwire kits, yeah those are not as common but yes install is same but instead of connecting 3 wires only 2 wires are connected (refer to the instructions of the kit to determine the function of the 2 wires, most use GND and ACC and some use GND and BATT). Here is my hardwire video where I cover 2 lead and 3 lead hardwire kits ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Yky9_tTvwMc.html and here is my follow up video showing the hardwire install process ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K2iKXj82354.html Cheers!

@Leinsterbaby Год назад

@@AlexAutoFun Cheers for responding. The reason I asked, because normally, there is 3 wires, ground, constant and ignition on only, this enables the one with ignition on to work when you drive, and constant to work when there is a parking mode. I am trying to wrap my head around, how parking mode will work in that setup, when car is off :D Also, would you reccomend Kenwood cameras the 501 and 601? They have nice sets with those kits included and rear cams.

@AlexAutoFun Год назад

@@Leinsterbaby Ah yes, I would recommend to check the instructions for the kit, as mentioned earlier some two lead hardwire kits use ACC (switched ignition power) and GND and some other kits use BATT (constant battery power) and GND. It just depends on the kit and how it was designed to function. Usually on ACC and GND kits the dash cam will not have parking mode (unless it's equipped with a battery) and on kits with BATT and GND the dash cam will either stay on to record when the car is off or will enter parking mode after period of time. Ah regarding the 501 and 601, unfortunately I have tested any of their dash cams but I will see if I can add to the list of dash cams to review, stay tuned and Cheers!

@Leinsterbaby Год назад

@@AlexAutoFun Cheers! My dad says, if you don't understand it, leave it. So prime day is upon us, and I am going with a Vantrue x4s or a redtiger, depending which will be cheaper! :) They got both 3 wire kits. Thank yo for your hard work.

@AlexAutoFun Год назад

Haha that is a good saying, haven't heard it before but it's so true! 🍻

@latunyabarriere537 4 месяца назад

Redtiger gives the hardware parking kit for free!

@AlexAutoFun 4 месяца назад

Hi LaTunya! Nice! I have heard that they do that in some cases when you contact them, glad to hear they took care of you. Cheers!

@secondmindfilms7962 2 месяца назад

Where’s the other video link?

@AlexAutoFun 2 месяца назад

Hi Second! Here you go ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uZp95NbNlmM.html and there are more related videos I placed links to the in the video description. Cheers!

@secondmindfilms7962 2 месяца назад

@@AlexAutoFun Thank you!

@AlexAutoFun 2 месяца назад

@@secondmindfilms7962 You're welcome!

@mvirdi2333 Год назад

❤❤🙏🙏U.K.

@AlexAutoFun Год назад

Thanks M Virdi! Cheers!

@americanpatriot8996 5 дней назад

This hard wire kits are a bad design because of that fuse ever blows your screwed and will have to use a fuse tap anyway. But I had to do mine a little different anyway. I have a wrangler JL and in the wrangler there are 6 fused wire taps on the inside cab under my glove box so I used the 10 amp and 15 amp battery and acc connections. I cut off the fuse taps on the kit and spliced in my own fuse taps. And all the wiring is on the inside of my cab and I didn’t have to run it far and didn’t have to go thru the firewall. Only issue is there is a lot of slack I had to roll up and hide behind and under my glove box. No big deal it all works and is fuse protected. But now it’s protected by 2 fuses because the factory wires are already fuse protected. Just extra protection but works as designed. The original issue I had with this was the hardwire kit doesn’t allow you to remove the fuse if it goes bad.

@AlexAutoFun 5 дней назад

Hi A! Ah yes Redtiger, has since upgraded their kits to this new design ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_1cIkR3YB-8.html Cheers!

@simonramirez243 Месяц назад

I don’t think you can put a fuse on a fuse..

@AlexAutoFun Месяц назад

Hi Simon! Correct, it's not possible to put a fuse on a fuse. However fusetaps can be used to place 2 fuses into 1 fuse spot. Here is another video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Qzw9yUYN7zo.html where I explain how fuse taps work in more detail, Cheers!