Relocating your Winch Control Box | Warn Winch Install

Подписаться 13 тыс.

Просмотров 5 тыс.

50% 1

Most modern winches have a detachable solenoid allowing for relocation. In this case we will be working with a WARN VR EVO and relocating the solenoid under the hood of a FJ Cruiser. To relocate the solenoid we needed to make custom power cables to account for the extended distance and properly wire the winch.
Many after market bumpers simply do not have the space to fit a large winch and solenoid while being fully enclosed (without looking like a big metal box that is). We will be installing the winch with our Stronghold Bumper for FJC.
Winch Breakdown: 0:00
Custom Power Cable: 9:15
Attaching Wires: 13:35
FJC Stronghold Bumper: metaltech4x4.com/metal-tech-f...
#4x4 #winch #installation

Авто/Мото

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@BirdDogOffRoadAdventures 10 месяцев назад

Great Video!

@TheShooter466 10 месяцев назад

The small ground wire can also be grounded to the battery. it is all the same

@Metaltech4x4 Месяц назад

I agree that Earth is Earth in car wiring; however, most, including Warn, require the small ground wire to go all the way back to the solenoid box in their instructions. Since they took the time to ask, we, especially as commercial installers, always follow this request.

@rocketman7774 2 месяца назад

Any info or pictures on the mount you used in the FJ? I’m doing the same.

@Metaltech4x4 2 месяца назад

Looks like no direct photos of the mount we made for it. It was an L shaped bracket that just used self tapper screws into the side of the inner fender. Nothing fancy! Good luck with your install. Hope our video helped some.

@coolnick160 2 месяца назад

Great vid!! Did you run the cables through the hole behind the headlight or the hole behind the blinker/side markers? Looks like behind the headlight, but after I look at mine, I don’t see any possible way of running them through that hole..

@Metaltech4x4 Месяц назад

The cables are routed through one of those two holes, I do not recall. We have been running winch cables through the front apron since 2006 on the FJCs, so yes, definitely, one of the spots can accommodate them! We do always recommend using a quality loom to protect the cables as they are hot with a direct mount to the battery, so we never want them to have the jackets direct to metal and short out over time.

@SalvoDan 9 месяцев назад

Paint pens are cheap. As soon as I started fiddling with custom mounting a winch in my vehicle, I purchased some at the same time as I purchased more suitable bolts.