Тёмный

Scale Model Hydroplane Finishing The Bottom Sponsons | ML Boatworks Kit Boat Build 

M5 Performance Hydroplanes - Scott Meyers
Подписаться 8 тыс.
Просмотров 5 тыс.
50% 1

The bottom is done! In this video we tackle the most difficult of the ride surfaces to install - The recovery pads. Tough, yes, but we're tougher! Next up... Driveline and motor installation
Subscribe to M5 Performance Hydroplanes RU-vid Channel;
/ @m5perfhydros
Watch the entire build series here;
• Building a Radio Contr...
Need tools and parts to complete your build? Check out the links below to see many of the tools and supplies used in this video series. Disclaimer - as an Amazon Affiliate I earn a commission on stuff in these links. And by commission I mean pennies, but, yeah, well, it's something.
But have no fear! You pay nothing extra, only get great parts!
Wesley's Custom Graphics - Here's where you get 'em; www.wesleyscustom.com/
amzn.to/3W6KILn Awesome Dewalt clamps as seen in the video - Get 'em!
amzn.to/3Fiw0tA 1-2-3 Blocks as seen in my videos - Super Handy!
amzn.to/3iD3ZVK G/Flex Epoxy - This is the one you want for the majority of the assembly. Getcha some!
amzn.to/3jl3f7R Wood Craft Picks for making perfect little radius fillets
amzn.to/3kbMdcq THE BEST epoxy application brushes - no stray hairs! Luv em!
amzn.to/3xB0H9r Craft Sticks, for making slightly larger radius fillets with epoxy
amzn.to/40R9zVl Total Boat Flotation Foam - Awesome stuff!
amzn.to/3XtMlSU Dremel wood cutting wheel. Get the mandrel too;
amzn.to/3QAtfIy Get this Dremel mandrel for mounting the cutting wheel and other accessories
amzn.to/3SSBeC2 Dremel Carbide Tooth Cutting & Grinding Bit
amzn.to/3XKWXh1 Cordless Dremel Rotary Tool - Ditch the cord!
amzn.to/3wHnHmG Dremel Right Angle Attachment - Best. Tool. Ever!
amzn.to/3ISiAqF Angle Protractor as seen in my videos - A must have tool!
amzn.to/3XxuKK1 Starbond Flexible Medium CA - The only CA glue you will ever need
amzn.to/3JjNRTR Half-Inch Hobby Blades as seen in my videos
amzn.to/3Hph3rp Digital Scale for epoxy measuring and mixing
amzn.to/3DtueFm West Systems Colloidal Silica (Hey, YOU try to pronounce it!)
amzn.to/3CW6DwJ 48 Inch Aluminum Straightedge - Gotta have it!
amzn.to/3vXd7Yc Digital angle gauge. We'll be using this a LOT during the build. Get it now so you'll be ready.
amzn.to/3xMXHXl 10-32 Alloy Steel Button Head Cap Screws
Finnish plywood from Aircraft Spruce available here in metric sizes; www.aircraftspruce.com/catalo...
Domestic birch ply from BalsaUSA; shop.balsausa.com/category_s/...
Need to build your jig first? Watch this video and I'll show you how! • RC Hydroplane Construc...
M5PerfHydros.com -- M5 Performance Hydroplanes is on Facebook!
allrc1.com -- Need RC boat parts? Get what you need at Rattlesnake RC
www.rcunlimiteds.com/ -- R/C Unlimiteds, the largest scale hydroplane racing club in the world
mlboatworksrc.com/ -- Awesome Boat Kits available at MLBoatworks

Спорт

Опубликовано:

 

15 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@twistedliquidrcboats
@twistedliquidrcboats Год назад
Thanks for givin a dog a bone for me!!!!! He’s not goin down yet Scott, don’t think that way. He’s by your side, he wants to go fishin!!!! Take care sir.
@M5PerfHydros
@M5PerfHydros Год назад
I knew you'd like that! Don't worry, I'm not giving up on my boy. He's pretty rough (ruff?) these days though, and I can tell we don't have a lot of time. He's on a lot of pain meds due to arthritis and joint deterioration, often so bad that he can't walk. But he still enjoys eating and pooping. Heck, what else is there?
@twistedliquidrcboats
@twistedliquidrcboats Год назад
@@M5PerfHydros help him walk to the end of the leash for me. Appreciate ya Sir!!! HGD
@peterjuo
@peterjuo Год назад
You got love spelll check
@M5PerfHydros
@M5PerfHydros Год назад
Eye dew luv spel cheque
@GRADERFL
@GRADERFL Год назад
Nice!
@em_schutt
@em_schutt Год назад
Yes I’m watching!!!!
@M5PerfHydros
@M5PerfHydros Год назад
Turn off the videos and go build a boat!
@markvanyo4302
@markvanyo4302 Год назад
Scott according to my year 2023 Hydroplane & Raceboat Museum wall calendar on Friday, June 2nd is the ‘Spring Testing in Tri Cities’. Do you ever attend any of the H1 Unlimited Hydroplane testing events or races?
@M5PerfHydros
@M5PerfHydros Год назад
Every year! We race on Friday and Saturday morning, then hang out with the big boats afterward. You should come!
@markvanyo4302
@markvanyo4302 Год назад
@@M5PerfHydros I would have if it wasn’t for the high heat in the Tri Cities area and the lack of shade on the shore of the Columbia River. Meaning I can’t take the heat. This past summer I went to Lake Washington to watch the H1 Unlimited Hydroplane races for two days. The high was around 90 F on both days. Thank goodness there is shade under the trees that line the shores of Lake Washington.
@M5PerfHydros
@M5PerfHydros Год назад
Not too many guys would admit that they can't take the heat, so I commend you for it! I'm a desert dweller who doesn't start to feel normal until about 105°
@jameswalker-pm2tn
@jameswalker-pm2tn Год назад
I have the same junk clamps… both the red and gray.
@M5PerfHydros
@M5PerfHydros Год назад
Ya I hate paying $8 for a little clamp, but these DeWalt ones are the bomb!
@bobbybilliot3797
@bobbybilliot3797 Год назад
I would love to build a hydroplane but I don't know of any clubs or any races around here in Louisiana I was thinking of trying to start something
@M5PerfHydros
@M5PerfHydros Год назад
Say what?!? There's a huge club down there! Go here, check it out, and then build a boat! facebook.com/groups/196353934160813/
@aliharvey9946
@aliharvey9946 Год назад
Not yet.
@templeton3504
@templeton3504 Год назад
Wesley's Custom Graphics no longer has an active sight.
@M5PerfHydros
@M5PerfHydros Год назад
Well that's odd. I'll contact him tomorrow to see what's up. Thanks for letting me know
@M5PerfHydros
@M5PerfHydros Год назад
It's fixed! Thanks again for the heads up
@garyrose1300
@garyrose1300 Год назад
You mentioned your next build is a gas. Is it going to be a U-21?
@M5PerfHydros
@M5PerfHydros Год назад
Nope! Stick around...
@michaelragan5799
@michaelragan5799 11 месяцев назад
What do you use for nitro motors today and what size?
@M5PerfHydros
@M5PerfHydros 11 месяцев назад
I've been running Nova Rossi .67's (class size engine), but they're no longer available so I'm switching to CMB
@michaelragan5799
@michaelragan5799 11 месяцев назад
@@M5PerfHydros I think I may still have my old Rossi...never been used....I know I still have my OPS 60...also still NIB
@02155Tony
@02155Tony 8 месяцев назад
Could you tell me the purpose of the step on the inboard side of the sponson??
@M5PerfHydros
@M5PerfHydros 8 месяцев назад
The step beside the recovery pad is there to reduce the width of the recovery and act as a second "catch" if the nose dives deep. The step beside the primary ride pad serves the same purpose, and also releases air to reduce lift
@02155Tony
@02155Tony 8 месяцев назад
@@M5PerfHydros Thank you
@imbranjamil4994
@imbranjamil4994 7 месяцев назад
Leval sentar the bots speed
@M5PerfHydros
@M5PerfHydros 7 месяцев назад
Sorry but I can not translate, but I hope this is a compliment! 🏁
@curtiscook3315
@curtiscook3315 Год назад
Scott would you do the sponsons this way angled on a 34"p black pearl boat on F.E. or jut the big hydros ? About to build one to run with Heart of Texas Model Boat Club, they build some FAST FE. boats
@M5PerfHydros
@M5PerfHydros Год назад
I haven't built one of those, but as a general observation I think we've all been using too much angle of attack for a long time. Back when engines had a lot less power and prop designs were terrible a lot of angle was needed to get the boat out of the water. These days, especially with electrics, it just isn't needed.
@curtiscook3315
@curtiscook3315 Год назад
@@M5PerfHydros thanks for your reply and your videos on building hydroplane boats , i enjoy watching your fine work!!
@M5PerfHydros
@M5PerfHydros Год назад
Thanks for watchin' CC!
@tjgrossman
@tjgrossman Год назад
Excuse my ignorance, have been out of the scale boat scene for some time. Are their plans easily obtainable for these boats? Had a miss circus circus 20 years ago.
@M5PerfHydros
@M5PerfHydros Год назад
Sadly, not so much. Plans for almost every unlimited hydroplane ever built used to be available from Newton Marine, but their website has been down for months. Best option right now is to get a framing kit from ML Boatworks. The kits are awesome, and would be a great way to get back in it! Check it out here mlboatworksrc.com/
@tjgrossman
@tjgrossman Год назад
Thank you for the info!
Далее
СПРАВКА ДЛЯ УНИВЕРА
00:44
Просмотров 372 тыс.
ML Boatworks RSX 380_Chasing Triple Digits!
15:43
Просмотров 1,4 тыс.
Cheap Walmart RC boat mods
9:56
Просмотров 4,6 млн
ML BOATWORKS RSX380_BREAKING EIGHTY! 82.1 MPH!
11:29
Месси Не Забил, а ОН СМОГ😯
0:54
At The End, Football Won! 👏
0:25
Просмотров 10 млн