Schrader Valve Ghetto Tubeless 

Using an adapter on a presta valve to fill a TON of air into the tire while doing a tubeless set up is a PAIN IN THE ASS. That schrader valve stem for tubeless is a god send ! THANK YOU !

Love it! I've always hated Presta valves so I'm going to convert just to have the Schrader.

There’s something so cool about a Schrader tubeless setup

I did my first tubeless conversion last week. I dry fit the tire,pumped it up with a floor pump and it set the bead. So I let the air out , bead held, and put the sealant thru the valve. I couldn’t believe how easy it was, I heard horror stories

Dude, love your videos man, learnt something new every time. Good job, keep it up.

Inner tubes smells like fish😂

GREAT JAY-OH-BEE Master MC... yeahh boy.. you got 'em . Gorilla tape; Stan's brand sealant and schraeder valve... you got it. excelent . Great info. Thank you for sharing .

A tip for converting non tubless rims to tubless is you double wrap the rim tape to get the extra width so you have a nice seal beetween the tire bead and the wheel

I love your channel dude.

Nice DIY erp...man, this vid made me go back and tinker on my old cannondale 29er.

Cool setup, pang bakbakan na sa trails! 💪😎 very informative.

Wrap a tie down around tire circumference to force beads to tighten / move outwards. Spay soapy water generously around both beads and hit it with a medium blast from any compressor. My Ryobi 18v One Gallon tank works fab for this - this method is legit on every FAT or MTB tubeless conversion I've tried.

Great content. Just subbed. Keep up the good work. 👍🏻

Hahahaha pampa good vibes ko lagi panonood sa channel mo idol 🤣💪

Did a ghetto with the ground control flak jacket. Just put more rim tape to thicken the bead area of the non tubeless rim. It will work, but is a tough job. Needed a lot of soap and water.

Very informative!👏

Schrader is much better than presta, very much universal and tougher, less problem especially when pumping air, in gas stations, no need for adaptor, great video very informative, stay safe. 👍

You deserve one million subs

I don't think they should make a dad bod shirt in that size haha

The mounting of the Michelin tire was piece of cake. Try out org UST tires on an UST rim... I managed to break at least 5 pretty expensive tire levers and still the tire wasn't in correct place on the rim... UST was horrendous to mount but oh boy did it work wonders in the woods with super low pressure and you did not need to use any sealant at all. Even though my rear started to leak after 5 years.

Did this 3 years ago with stock Weinmann non-tubeless rims and wired WTB Vigilante 2.3s and Schrader valves. Worked like a charm but i could be better if I used legit sealant intended for bike use. I used the cheap sealants from local motorcycles shops that almost doesnt work LOL

When the sealant dries you have to take 1 part of the tyre apart right?

nice idol..nice vid. tagal kong dna napapanood ang mga blog mo.. nakaka ingit nmn bike mo... hehe.. herap ang maherap talga...celphone na nga lang dpa makabili...kaya sa comp. rental nalng..makapanood ng mga blog. mo..ingat lagi...ka erp.

With car tires if you can’t get it seated you can use a ratchet strap or even some rope with a stick twisted in it to press in the center of the tire to force the sidewalls out so the bead seats. Seems like if you have a stiff enough sidewalk it should work with bikes as well.

Great video! what size mm Schrader valve did you use?because there is a few different sizes. I have a 20x4.0 rim for a fat stroke tire but don't know what MM valve size I need.

Nice content erp!

Yun oh...thanks erp✅

Cool thanks

Nice procedure.

Noice. Mines using presta valves and since I'm also a roadie I can use the old presta valve cores in case my others get damaged

That’s not ghetto tubeless. That’s legit tubeless

Cool tires😎

I did almost the same thing to my pitch comp1x. I just cut out the valve from the inner tube and used the same tire on the wheel. But I think your way was an upgrade from what I did.

Muy bien..... Sin tanto merchandizing

What tire model is that? I know it’s Michelin but I couldn’t find what the name was

We need more quarantine entertainment

Is there no schrader rim that is tubeless ready on the market?

Wazzup erp from Philippines again 😂🤣 Bagong upload medyo madagaldagal naghintay pero ok lng

My specialized pitch came tubeless ready

Yes i smell the same thing too sir... I tought there is something wrong with my innertube....

I did this - I tried gorilla tape and gorilla tape clear. Both tapes lasted about 2 months for me but then failed so ultimately I went with proper rim tape and that's lasted for much longer. IMO worth the hassle of using the wrong product.

Innertubes Smells like A Dead Rat for me AHAHAHAHA

you should have done this outside man :D lol your floors T_T

How did you do it?

Ayus Noy. trails n yan. Godbless and Ride Safe Noy

I totally can relate to the fish smell of innertubes

I have a question I got a used mtb. All tubeless. The front tire is flat and when I checked there’s a lot of sealant dried up on the inside, resembles a “booger” texture. Can I add sealant over this?

Nice build time new shaved erp..like the shirt men but it doesnt significe you,skinny erp lol..✌💪

Wondering what sealant smells like

Greetings, hey, do you think the hub is compatible from 9 to 11sp but on a road bike?

I think about weight that the tape you used it’s very heavy, Thanks for your videos

Can u tell me on long term if this tubeless conversion holds the air? I have the same rims and I thought they are not tubeless ready...

Have you try tubuless rim tape from aliexpress?

can't find any stan's tubeless schrader valve here in the Philippines.

right, now I understand.

Yeah i used the Gorilla tape before they work good bro👍

Ayus! Gamitin na!

you need an air compressor. bet that specialized would have mounted right up. never could have mounted my ust tire on my ust rim

i used an automotive schrader valve and worked perfectly, just need to cut some rubber

Im sure this is going to be on the pitch. What’s the max size tire can I fit in the rear? Can someone help me? Idol Mark?

Why mine doesn't hold air?

The fish smell is from ground up fish bones inside the tube, to stop the tube sticking together. That's why if you cut open a tube it seems dusty

Is it just a normal Shrader valve use from cars or is there a specific one for a bike?

i have the same bike... the stock rims r tubeless ready

You lost me with the natural light hahaha

Specialized really needs to make their ground control tires tr I have like two pairs from old bikes and I wish I could use them

Good to know, I'm tired of replacing inner tubes, and don't feel like paying $60+ for each tubeless tire.

Nice tip.. i wonder if i can do this on my 2015 Pitch Sport.... can you tell me how wide are your tires? Mine are 2.4 in front and 2.2 on rear. I think that i will try to go tubeless. Of course, i don't have the original tires ( Ground control ) , i have a pair of Continental Mountain King.

How do I know if my wheel is double wall? Also I have the same bike, specialized pitch 2019 and they told me I needed to have tubeless ready wheels and tires

Yes erp ang baho ng amoy pag binabawasan ng hangin

Did you leave it at 60psi?or air out a bit after install??nice video by the way I'm gonna try this aswell

6:18 You can actually get loose tires to seat but you just have to put the wheel down and focus on pumping as fast as you humanly can (might not want to show that on camera though).

Ayuz erp naka tubeless na si Specialized

Tubeless rims, or regular clincher hook? Have you ridden it yet?

Ganyan talaga pag hindi tubeless iba ang amoy😂..pa shout out po

Gorilla type is sick

Looks easy to do 😂

true my inner tubes smell bad too

Hmmm tube less .idk . I cut a old tube down the middle and inserted it between the tire and tube. I have hit a couple of jagged little rocks they use here to fill holes in the road and so far it's holding up . Worth thinking about though .

I always get that fish smell aswel,i wish someone could tell me why that happens

The rim was Jalco if its from Specialized Pitch bike

Yes innertubes stink worth the old air 🤣😍🇬🇧

Dude wtf you just demotivated me with that double wall rim stuff and I've been working on this for 2 days.

That is so nice... Saw ur vid converting the Specialized to 1x8 thats nice also... Question... Can you make it 1x10?...or the rear hub can only use 8 speed cassette?... Thanks...

Gorilla tape makes a 1" wide tape. Cheap at Wally $3. I used to see a 3/4" at ACE True Value but last time I checked they no longer carry it.

Presta is way easier to fill up tire, with smaller pump and 1 gram plastic presta>schrader adapter would've fixed it ;) Yes, old air inside tubes always smell like fish, over 30y smelling bike stuff

👍

It does smell like weird stuff lol. I think u are some tipe of McGyver good job..👍👍🤜💥🤛

Does it really guarantee kuya? Will it work for any type of rims? As long as its double wall? I have here a Mavic XM 119, I guess? 😅😅 Double wall ✔

You can make a compressor out of a 10 usd garden sprayer

Frame is all I had haha... Wish i could buy equipment to make my own mtb

Yeah i smell it too

Yown may pag asa na pla ma tubeless ang rim ko na shrader valve ang butas....salamat erp...meron ba sa amazon nyan

The worst is a fat tire bike. Nightmare to set up tubless if the rim profile is boxed vs V shaped. My 80mm Kona wheels are a pain to set up

What size tire was that and what's the max size the will fit that bike and wheel?

How much wide is the new michelin tire?

Werid question but could use glue

Yea double wall rim and be shure your tires are tubeless ready. If not, It don’t work

Kuya mark tubeless ready naba yung rims mo?

Yeah it gives a funny smell 🤭