Sloan Regal Flushometer | Installation | Repair and Replace

Подписаться 198 тыс.

Просмотров 164 тыс.

50% 1

In this episode of Repair and Replace, Vance shows how to install a Sloan Regal or Royal Manual Flush Valve. This applies to both commercial toilets (water closets) and urinals.
Order Sloan Flushometers Online: www.amresupply.com/catalog/Flu...
Troubleshoot continuous flushing, shortage of water, and excessive water flow: • Troubleshooting a Sloa...
More Sloan Regal or Royal repairs:
• Sloan Flushometers - R...
Applicable models: 110XLYO, 3980009, 186XL,3082653, 111XLYO, 3080053, 3980012, 186-1, 3012636, 3082675, 186-1XL, 3982628,
___________________________
00:00 Intro
00:20 What You'll Need
00:34 Step 1: Flushometer Rough In
01:47 Step 2: Install the Flushometer
02:34 Step 3: Test the Flushometer
___________________________
AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.
Connect with AMRE Supply
Website - www.amresupply.com/
Facebook - / amresupply
Twitter - / amresupply
Instagram - / amresupply

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@AmreSupply 2 года назад

*Note* Teflon tape, or pipe joint compound is not to be used on any connection that uses an o-ring or gasket. It is however needed on the brass control stop adapter. This was not shown in the video but will still help provide a leak proof connection. More information on teflon tape: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9DhL0vet4gk.html Guide on pipe joint compound: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-a0jFPj4W8bY.html

@zeljkop.9179 2 года назад

Short, simple and useful video.

@AmreSupply 2 года назад

Thank you!

@chrisking1949 3 года назад

Perfect, short and to the point. Thanks

@AmreSupply 3 года назад

You're welcome, we're just happy to help!

@johngibbons2570 5 лет назад

I am a novice plumber. Clear concise video helping me and another beginner to be confident in our repair. Thank you!

@AmreSupply 5 лет назад

You're welcome John! We're glad the video has helped you become more confident in the repair! If you're wanting to learn more about troubleshooting with additional flushometer models, then take a look at this playlist for 80 more videos ru-vid.complaylists?view=50&flow=grid&shelf_id=11

@chrismeloche2910 4 года назад

Great video it helps a lot thanks now l feel a little more confident.

@AmreSupply 4 года назад

Hi Chris thank you for watching! We're glad you found the video helpful!

@Paul-tx3xl 4 года назад

Really appreciate your video very helpful Thank you

@AmreSupply 4 года назад

You're welcome Paul! We're happy that the video helped you out!

@tompalmer5114 5 месяцев назад

Thanks for the help hopefully make the job simpler

@AmreSupply 5 месяцев назад

You're welcome, we're just happy to help!

@mathewabraham5258 3 года назад

nice video and good instruction good job instructor

@AmreSupply 3 года назад

Thank you Mathew, we're glad that you found it helpful!

@ben1canobe150 4 года назад

Thanks - Great video - really helped

@AmreSupply 4 года назад

You're welcome Ben! We're glad you found the video helpful!

@ElyseHorvath 5 лет назад

Definitely helpful!

@AmreSupply 5 лет назад

Thank you Elyse!

@keishawinston2290 3 месяца назад

❤thanks so much was able to fix one of my stores

@AmreSupply 2 месяца назад

You're welcome, we're glad to hear that the video helped you out!

@aliabdullah2535 7 месяцев назад

Nice video. 👍🏽

@AmreSupply 7 месяцев назад

Thank you, we're just happy to help!

@mremonmiahemonmiah6409 5 лет назад

super video for thanks

@AmreSupply 5 лет назад

You're welcome Mremonmiah! Thanks for watching!

@juanjaramillo6778 6 лет назад

Good job guys great video very specific ,,make my job so much easier Lol tHANKS GUYS

@AmreSupply 6 лет назад

You are welcome Juan Jaramillo! We're glad the video helped make things easier for you!

@carloscolon6717 3 года назад

Very helpful

@AmreSupply 3 года назад

Thanks for watching!

@tyronehamilton588 2 года назад

Yes I like the video!

@AmreSupply 2 года назад

Thank you!

@Takecareof_is 4 года назад

Thanks

@AmreSupply 4 года назад

You're welcome! Thank you for watching!

@gregjohnson9430 2 года назад

howdy. great video, Thanks! A couple pieces are listed in the installation and maintenance guide but do not see them mentioned in your video. how should the tail piece O-ring and Locking Ring sit within the Stop Coupling? O ring I would assume fits right inside the Stop Coupling against the Control Stop...unsure on the Locking Ring.

@AmreSupply 2 года назад

Thank you, we're glad that you found it helpful! It has been a little while since we filmed this so I'm just going from memory. There should be a small ridge that the o-ring sits against. The locking ring will be on the other side of the ridge. I think the idea is that the locking ring needs something to press against to help the coupler to "lock" into place. Hope this helps!

@carlbullaro7616 Год назад

Always use 2 wrenches . 1 wrench is asking for trouble with old plumbing

@AmreSupply Год назад

Thanks for watching. Do you mean 1 wrench to stabilize and another wrench to tighten?

@gauge6513 Час назад

I'm a maintenance man. Great advice. Movement is bad in plumbing. Thanks

@davidchriscastillo2499 Год назад

Nice, interesting informative videoclip. I've wondered why some flushometer valves are shorter, others are medium "altitude" & still others contain much more "altitude", yet those of the same "altitude" whether short, medium or tall may have the same capacity of gallons per flush.

@AmreSupply Год назад

Thanks for watching. The capacity comes from how long the valve stays open. This is is a timing issue not an issue of how large the valve is. This video on diaphragm will explain this in more detail: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IhBA-AZBXGc.html

@DavidChrisCastillo-im1wg 10 месяцев назад

@@AmreSupply Much gratitude for your response.

@hitenpatel1880 4 месяца назад

Hey, thanks for this video. if the measurement from the center of the flush valve to the cut off is not long enough with the provided pipe how do you adjust that pipe to extend it by quarter inch or half an inch or whatever is required. It appears that that pipe is actually soldered or maybe welded on to the flush valve. I’m sure that is not the case.

@AmreSupply 4 месяца назад

Thanks for watching. In most cases the tail piece can removed and there are various lengths available. You'll be looking for a H551A - Adjustable Tailpiece.

@ronaldupchurch9752 Год назад

This is the second one for the basement bat. ru-vid.comUgkxOuLt8IL_GxhhaK8DBuKEL-zV0UJVpWZn , works great

@AmreSupply Год назад

Thanks for watching.

@erikzacarias7379 5 лет назад

Great . Thank you

@AmreSupply 5 лет назад

You're welcome Erik!

@syuganov Год назад

Hey, do you by any chance have any tips on how to install a bidet seat on the flashometer toilet? Basically - what kind of parts could help getting into the water supply needed for the bidet seat?

@AmreSupply Год назад

Thanks for watching. There are many tutorials out there showing how to install bidets. The steps will be the same but for flushometers you can't connect to the large 1" supply line. You'll have to connect a T to the water supply at the sink, and run a line to the toilet.

@syuganov Год назад

@@AmreSupply thank you!

@AmreSupply Год назад

@@syuganov You're welcome!

@crash60068 4 года назад

Do you sell those wrench? I can't find smooth Jaws that are big enough

@AmreSupply 4 года назад

Yes we sell that wrench it expands up to 3". You can find it here: www.amresupply.com/part/ULN1129-1-inch-3-inch-ADJUSTABLE-SLIP-NUT-WREN

@AntonioGarcia-sl2iz 2 года назад

Bery good

@AmreSupply 2 года назад

Thank you!

@raihanamaniri7981 3 года назад

sir what kind of bowl to be use?

@AmreSupply 3 года назад

Thanks for watching. Any commercial bowl can be used as long as you match the flush rate so the bowl and flushometer have the same gpf.

@kewinli4768 3 года назад

Do you need to turn off the water to install this?

@AmreSupply 3 года назад

Thanks for watching. It depends on the building but to install a new flushometer, you'll likely have to turn off a main water valve to that room or to that entire floor.

@carldingman3136 2 года назад

Can pex be used with a sloan toilet valve?

@AmreSupply 2 года назад

Thanks for watching. It is difficult to get enough pressure and an adequate flow rate by using PEX so it isn't normally recommended.

@CailinnNoT 2 года назад

How would I install a bidet with this toilet

@AmreSupply 2 года назад

Thanks for watching. There is nowhere to attach the bidet to a flushometer. To make it work, you would have to install a tee in the pipe to the flushometer and connect the bidet to it with a shutoff valve. It might be easier to connect the bidet to the sink's cold water supply.

@westtexas7358 2 года назад

Why do you say cut the copper tube 1" shorter than measurment but then say copper tube should be 1 1/2" shorter than measurement?

@AmreSupply 2 года назад

Thanks for watching. To clarify, the copper pipe is 1 inch shorter, and the "cover tube" is 1-1/2" shorter. The adapter on the copper pipe will be screwed into the control stop and will be about 1/2" deep.

@kingmidas2124 5 лет назад

What size pipe did you use? 1” or 3/4?

@AmreSupply 5 лет назад

For these videos we used a 1" diameter pipe. Generally for water closets, 1" is used and 3/4" is used for urinals. You'll see some models listed as 1" inch or 3/4" in addition to being listed as WC or water closet and UR as urinal.

@pauld847 5 лет назад

@HarryPatel-xq2qg 5 месяцев назад

Hi, getting a leak at the flush breaker connections. Have the washer in there. Any ideas ?

@AmreSupply 5 месяцев назад

Thanks for watching. Is this on a new installation or an older flushometer?

@HarryPatel-xq2qg 5 месяцев назад

Actually replacing parts on old installation. @@AmreSupply

@AmreSupply 5 месяцев назад

@@HarryPatel-xq2qg Then it's best to install a new vacuum breaker. This will come with a new washer. As well it can be good to clean the threads and any surface that makes contact with the vacuum breaker, this will ensure that there is a good seal.

@jasonjean398 2 года назад

You neeed Teflon tape On the adapter fitting…. And most of the times you have to cut the vertical piece, it never fits in place like that lol usually to long

@AmreSupply 2 года назад

Thank you for sharing your thoughts. We are currently working on our appliance series before we update older videos like this. There are a few points that would be good to clarify and that includes the use of teflon tape and the distinction between the connections that do and do not use an o-ring.

@Pipdad3000 Год назад

What do you do if the threaded part coming out of the top if the toilet spins and leaks

@AmreSupply Год назад

Thanks for watching. We haven't got a video showing this exact repair but if you search for "How to Replace a Closet Spud and a Spud Coupling" you should be able to see how to install a new one. www.amresupply.com/catalog/Spuds-Spud-Washers-PF7A

@Pipdad3000 Год назад

@@AmreSupply all good I bought a new spud and replaced it

@AmreSupply Год назад

@@Pipdad3000 We're glad to hear that you found a solution!

@yolandasanchez2217 Год назад

Is it possible to add a bidet to the flushometer?

@AmreSupply Год назад

Thanks for watching. It is possible to install it on the toilet, however you would need a supply of water to the bidet. The easiest would be to connect to the sink by installing a T shutoff valve. You can run a flexible line to the toilet.

@yolandasanchez2217 Год назад

@@AmreSupply that makes sense and I now see how it can be done. Thanks very much.

@AmreSupply Год назад

@@yolandasanchez2217 You're welcome, we're just happy to help!

@Mobilehomewizard 3 года назад

No plumbers paste?

@AmreSupply 3 года назад

Thanks for watching. Except for the control stop inlet, Sloan does not recommend that any thread sealant or plumbing grease to be used on any fitting or component. This is referenced in the instruction manual. All the other fittings either use a gasket or a washer.

@themadlad8540 Год назад

What about the bottom brass part

@AmreSupply Год назад

Thanks for watching. The 1-1/2" brass spud is built into the tank on commercial water closets.

@juanls2 2 года назад

How to with pex hose?

@AmreSupply 2 года назад

Thanks for watching. We don't have a video showing any installation with pex hose. Using pex will require an adapter but check your local codes as it might have some specific requirements or restrictions.