Part 10 of The X-Trail Files.
In this video, I demonstrate how to remove and refit the upper glovebox unit on a T30 Nissan X-Trail DCi Sport.
Couple of things to be aware of when removing and refitting. The plastic hinge mechanism of the upper glovebox can fatigue and start cracking to the point where the lid goes all wobbly and loose. Big thanks to fellow RU-vidr Andy Dolphin for warning me about potential of hinge failure. Wasn't aware of this weakness until he mentioned it. Glad he did though.
The hinges are spring-loaded so it stays upright when open, however if these springs/hinges get stiff, extra stress is placed upon the plastic surrounding the hinge mounts. As you'll see in the video, my hinges are starting to display fatigue cracks. I'll have to reinforce this area with glass matt and resin or maybe glass matting and two part epoxy putty - so long as there are no clearance issues between hinges and surrounding dashboard assembly.
Second item to be aware of is the metal reinforcement strip between upper and lower glovebox sections can slip out of alignment so the screw holes don't align up. This is what I discovered when I realised my upper glovebox unit wasn't attached to anything. Turns out it's been off before for some electrical work (before I bought the car) but not fitted properly.
20 ноя 2017