Тёмный

Tiguan Low Boost P0299 part 1 

CoolAirVw Rm
Подписаться 21 тыс.
Просмотров 63 тыс.
50% 1

Diagnosis and an fix on 2012 Tiguan 2.0L Tsi CCT code engine.
If you learned anything and would like to contribute to the continued production of these videos find the donate icon on my website at www.kansascitytdi.com
The same problem can happen on GTI"s, CC's, Eos, Jetta's, Passats and Audi's with similar engines.

Авто/Мото

Опубликовано:

 

5 май 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 91   
@moffatk7948
@moffatk7948 2 года назад
Awesome video, I need to do the same repair on a turbo waste gate. You have given me great detailed illustrations and advice on how to go about it. Super, this video couldn't have come at a better time👌
@CoolAirVw
@CoolAirVw 2 года назад
I'm glad it helped. Thanks for watching and for the compliment.
@solexxx8588
@solexxx8588 Год назад
Nice to see you repair it instead of just replacing the part.
@CoolAirVw
@CoolAirVw Год назад
thanks.
@orville58
@orville58 4 года назад
You just showed that not every thing is unbox and install very interesting thanks for sharing
@CoolAirVw
@CoolAirVw 4 года назад
Your welcome! Thanks for watching.
@bettykent426
@bettykent426 Год назад
Wow I so wish you were near my location. Awesome video and now days they'll tell you replace complete Turbo. Your not a quitter you were determined and that speaks volume. My 2014 Tiguan went to shop today hardly wait to see what they say with my PO299 code light came on never had a issue running perfectly. Mechanics Like you are hard to come by. Appreciate watching your video Great Job! Thank you!
@CoolAirVw
@CoolAirVw Год назад
Remove turbo, send it to me, I'll fixer up, and send it back.
@bettykent426
@bettykent426 Год назад
So very nice but its @ shop to diagnose it. Where you located? or email i can send and get information from you?.
@CoolAirVw
@CoolAirVw Год назад
@@bettykent426 email is on website which is listed in every video and in the description of every video.
@bettykent426
@bettykent426 Год назад
Still waiting on shop to diagnose it. If my code is PO299 does that mean I need to replace complete Turbo or could be a part only in there that needs replacing like how your doing the waist gate or be something else. I know you said send to you and you could fix it. What are your thoughts on this? Really appreciate your help. Is it difficult to take off the turbo?
@CoolAirVw
@CoolAirVw Год назад
@@bettykent426 watch the video.
@nicksdiy4152
@nicksdiy4152 Год назад
Informative video. Thanks for making it.
@CoolAirVw
@CoolAirVw Год назад
your welcome. I'm selling the wastegate now if you need one.
@iankelly2110
@iankelly2110 4 года назад
great workman ship Richard
@CoolAirVw
@CoolAirVw 3 года назад
thanks
@IamJimhunder
@IamJimhunder 3 года назад
I used your video as a guide and successfully fixed mine! Mine wasnt throwing the P0299 fault but the rattle was driving me insane! Only difference is when assembly, I installed it with alot of silver anti-seize in the wastegate bushing and the arm where the rod meets the arm!
@CoolAirVw
@CoolAirVw 3 года назад
there are anti-rattle clips.
@IamJimhunder
@IamJimhunder 3 года назад
@@CoolAirVw yea I had one installed, it was still rattling. It was the shaft and bushing that was worn and it was more worn than yours. 300,000km in my mk6 GTI man
@CoolAirVw
@CoolAirVw 3 года назад
@@IamJimhunder good to know! Thanks for sharing that info.
@another640
@another640 2 года назад
Avesome skills and .. i like that you are not just a whole part changer
@CoolAirVw
@CoolAirVw 2 года назад
thanks!
@RaWoodgett
@RaWoodgett 3 года назад
Awesome explanation
@CoolAirVw
@CoolAirVw 3 года назад
appreciate the compliment
@neseloc00
@neseloc00 3 года назад
Great video, extremely helpful. Which replacement flapper did you buy, looks to be a few options on ebay? Looks like yours had a good fit.
@anthonyhumbert8787
@anthonyhumbert8787 2 года назад
All you had to do was set the bushing in the hole and then run the drill bit through. That would have put the notch in the bushing precisely where it belongs. And you would not have to fight alignment.
@CoolAirVw
@CoolAirVw 2 года назад
good tip.
@johnjerrehian4642
@johnjerrehian4642 Год назад
Didn't think of that... As long as the bushing was measured from the top first that would have worked great!
@xfefen2883
@xfefen2883 Год назад
I was thinking the same thing and wondering if I was missing something lol
@danman9017
@danman9017 4 года назад
your very good
@CoolAirVw
@CoolAirVw 4 года назад
Ah, shucks! Thank you.
@jafinjohn7367
@jafinjohn7367 4 года назад
Where did you get the rebuilt kit?
@huseyinhadimioglu5622
@huseyinhadimioglu5622 2 года назад
Thank you .
@CoolAirVw
@CoolAirVw 2 года назад
your welcome
@ThePelsorFamily
@ThePelsorFamily 3 года назад
Good video boss , ahh shabazz
@CoolAirVw
@CoolAirVw 3 года назад
thanks!
@EXOVCDS
@EXOVCDS 4 года назад
I was not aware that repair kits were available, thanks! 11:53 must have still been hot? =)
@CoolAirVw
@CoolAirVw 4 года назад
I think coincidentally while using the torch I tempered the roll pin. I had heated the turbo, then let it cool slowly, as I was interrupted, then it drilled relatively easily when got back to it later. I feel like this is one of my better videos of tech content and filming was relatively good although as I watched it after uploading I noticed a editing timeline mistake. Thanks for watching, and supporting me on my channel.
@mdcowart11
@mdcowart11 3 года назад
Are you using VCDS to make the graphs of the actual and desired boost pressure? Or hooking up your own lab scope
@CoolAirVw
@CoolAirVw 3 года назад
Yes VCDS. We use a scope alot but not for that.
@vsheavy2792
@vsheavy2792 4 года назад
Love all your diesel videos.how to removed the roll pin.is that roll pin install in blind hole.
@CoolAirVw
@CoolAirVw 4 года назад
Have to drill it out. They are pretty hard so maybe heat turbo to barely red in the area of the rolled pin, then let it cool slowly to anneal before drilling.
@vsheavy2792
@vsheavy2792 4 года назад
@@CoolAirVw Thanks
@darrellroireau4061
@darrellroireau4061 Год назад
Hi thx for great content. Question: If the wastegate arm is tight do you think it could typically still be a loose and worn flapper inside? My Obdeleven graph showed making boost on full throttle but then losing boost short after. It even made zig zag patterns which is puzzling to me Any advice appreciated thanks 🙏
@CoolAirVw
@CoolAirVw Год назад
the only real way to tell is disconnect the linkage which is very difficult or impossible. Remove and inspect the n75 for torn diaphragm and replace it if its torn. Make sure there are no boost leaks.
@darrellroireau4061
@darrellroireau4061 Год назад
@@CoolAirVw thanks! 🙏
@zaino660
@zaino660 3 года назад
Hello, would you help me with inf. Where I can buy the parts. Pls. Thanks. Good job
@zaino660
@zaino660 3 года назад
Hello, do you can help me, where to buy this parts?..mine is the same. Thanks
@abbasmuhsen2715
@abbasmuhsen2715 3 года назад
Great job done Is the wastegate normally open or normally closed Thanks bro
@CoolAirVw
@CoolAirVw 3 года назад
Normally closed.
@abbasmuhsen2715
@abbasmuhsen2715 3 года назад
@@CoolAirVw thanks
@CoolAirVw
@CoolAirVw 3 года назад
@@abbasmuhsen2715 thanks for watching my channel.
@davesterl
@davesterl 4 года назад
Some job
@CoolAirVw
@CoolAirVw 4 года назад
watch part 2.
@arik7620
@arik7620 2 года назад
Where is you shop located at, can you please fixed my Tiguan 2013.
@CoolAirVw
@CoolAirVw 2 года назад
base don your other comment you should shoot it.
@amcrae1
@amcrae1 3 года назад
Is this a two wheel drive Tiguan? Thanks!
@CoolAirVw
@CoolAirVw 3 года назад
Yes.
@CoolAirVw
@CoolAirVw 3 года назад
We did this repair to a 4wd since we've made this video.
@amcrae1
@amcrae1 3 года назад
@@CoolAirVw tHANKS!!!
@evertbenade7944
@evertbenade7944 3 года назад
Hallo, i have a 2016 Tiguan and the check engine light came on. The deal told me it is the turbo and needs replacing. It seems there is a shortage of these turbos so will only be available in a month or so. My question is can i drive the car as is or will it cause damage to the engine?
@CoolAirVw
@CoolAirVw 3 года назад
Dont buy a turbo if all you need is wastegate repair like in this video. Will it hurt it, no.
@evertbenade7944
@evertbenade7944 3 года назад
CoolAirVw Rm good morning, thank you for your response, much appreciated. The turbo is still under dealer certified warranty so will no cost my anything(lucky). My main concern was that it might take long to get the part and i need to use the car. So you say no problem to drive the car? Will not cause any damage to the engine itself?
@CoolAirVw
@CoolAirVw 3 года назад
will it hurt, no.
@d.edwardsfreelanceeditorvi4212
@d.edwardsfreelanceeditorvi4212 2 года назад
Is this common? How much is the cost for something like this? I'm far from the mechanic type
@CoolAirVw
@CoolAirVw 2 года назад
yes! We've done bunches now. If these parts would have been available sooner we could have done many more, instead of replacing turbos.
@MrDutch1e
@MrDutch1e 3 года назад
I have this same code but mine doesn't have any play from the outside it seems. Thinking next step should be to replace the bypass valve. 130,000km on mine.
@CoolAirVw
@CoolAirVw 3 года назад
Yeah, I probably should have shown that in the diagnosis. Pull the bypass valve and see if it is a early style or if there is a rip in the diaphragm. But sometimes the actuator can be stuck also. Plus it can be hard to see the slop.
@MrDutch1e
@MrDutch1e 3 года назад
@@CoolAirVw bugs me because I had a brass rebuild kit I had for my gti but then I traded it in and sold the kit lol. I don't think it's my actuator as its in closed position. If it was a stuck actuator causing the code it would have to be stuck open wouldn't it?
@joelngandu9571
@joelngandu9571 3 года назад
I had a same issue with my 2009 Volkswagen tiguan of Turbo/supercharger P0299 there is anyway I can call you by the phone , so you can take care of my car? Also how much
@CoolAirVw
@CoolAirVw 2 года назад
my email is on my website. Dont call unless you are local to Kansas city.
@Noel127
@Noel127 3 года назад
it would have been smarter to pop the cylinder in then drill once in place again to make the groove for the push-pin.
@CoolAirVw
@CoolAirVw 3 года назад
eh, maybe. But I used the groove to set the height. Maybe I'll try it your way next time.
@punchogamon
@punchogamon 2 года назад
where did he get the parts ?
@CoolAirVw
@CoolAirVw 2 года назад
I can send you one. Email me at coolairvw@aol.com.
@Shawn_313
@Shawn_313 2 года назад
I see multiple people asking where to find the rebuild kit, As.i would like to know myself also. But either I missed it or this was.never answered.
@CoolAirVw
@CoolAirVw 2 года назад
contact me through email at coolairvw@aol.com
@Shawn_313
@Shawn_313 2 года назад
@@CoolAirVw will do, Thank you.
@chanelwhitaker9514
@chanelwhitaker9514 3 года назад
can we get an update on the meth lady??
@CoolAirVw
@CoolAirVw 3 года назад
Sorry I have too many videos? Whats the time stamp?
@adisha3646
@adisha3646 4 года назад
firefighters come burning fire. what's happening
@CoolAirVw
@CoolAirVw 4 года назад
crackheads!
@adisha3646
@adisha3646 4 года назад
@@CoolAirVw what kind of is dangerous
@adisha3646
@adisha3646 3 года назад
@@CoolAirVw can I ask you someting??
@CoolAirVw
@CoolAirVw 3 года назад
@@adisha3646 I read just about every comment on my youtube channel and try to answer if I can.
@adisha3646
@adisha3646 3 года назад
@@CoolAirVw do you use VIBER number ???
Далее
Tiguan Low boost P0299 part 2
16:44
Просмотров 28 тыс.
VW/Audi TSI Turbocharger Wastegate Repair
18:14
Просмотров 89 тыс.
06 tdi low boost P0299
17:23
Просмотров 405 тыс.
Top 5 Failures ~ Volkswagen Tiguan
10:28
Просмотров 408 тыс.
Tiguan Misfire comeback P0302 P0300
14:50
Просмотров 65 тыс.
2011 VW Tiguan 2.0T Turbo Replacement part 1 of 2
16:03
впихнул турбину в глушитель
1:00
Попрошайка на BMW😅 #shorts
0:42
Просмотров 4,9 млн