No video :(

Twin Turbo'ing a 2015 Mustang GT to Beat the Young Kids at the Strip - Engine Power S2, E16

Подписаться 1,6 млн

Просмотров 419 тыс.

50% 1

New Mustang gets 900 HP twin turbo kit, looser torque converter, one piece driveshaft then a trip to the strip.
PARTS USED IN THIS EPISODE:
Dupli-Color: Dupli-Color Custom Wrap Automotive Removable Paint
More Info: pntv.us/pn_pt_...
Heatshield Products: Heat Protection, Lava Shield Mat, 1,200 degrees F, 0.008 in. Thick, Self-adhesive, 12 in. x 24 in., Each
More Info: pntv.us/pn_pt_...
Heatshield Products: Header Wrap, Lava, Lava Rock, 2.0 in. Width, 50.0 ft. Length, Each
More Info: pntv.us/pn_pt_...
Holley: Gauge, Digital Dash, Multi-Function, EFI, Black Bezel, Each
More Info: pntv.us/pn_pt_...
HP Tuners, LLC.: HP Tuner, VCM Suite with MPVI Pro and Ford Credits, Kit
More Info: pntv.us/pn_pt_...
Loctite: Thread locker, 271, Heavy-Duty, Red, 36 ml, Each
More Info: pntv.us/pn_pt_...
Mickey Thompson: Tire, ET Street, 28 x 11.50R17, Radial, R2 Compound, Blackwall, Each
More Info: pntv.us/pn_pt_...
Race Star Industries: Wheel, Drag Star 92, Aluminum, Polished, 17 in. x 9.50 in., 5 x 4.50 in. Bolt Circle, 6.125 in. Backspace
More Info: pntv.us/pn_pt_...
Race Star Industries: Wheel, Drag Star 92, Aluminum, Polished, 17 in. x 4.500 in., 5 x 4.50 in. Bolt Circle, 1.750 in. Backspace
More Info: pntv.us/pn_pt_...
Summit Racing: Hoosier, Tire, Drag Front, Dragster, 27.5 x 4.5 -17, Bias-Ply, Solid White Letters, Each
More Info: pntv.us/pn_pt_...
Bassani Manufacturing: 2015 Mustang GT 5.0L 3" X-Cross Over and Race Muffler System
Blow By Racing: Half Shaft Upgrade Kit Mustang 2015
Circle D Specialties: Pro Series Stage III Multi Disk Performance Torque Converter
Hellion Power Systems: 2015 Mustang GT ELIMINATOR Twin Turbo System 500 - 1,200hp capable, Large vertical flow dual inlet intercooler, Twin Turbosmart VEE port bypass valves, No cutting of body for easy installation, Twin Precision billet turbos.(V-band inlet for easy installation) Turbosmart E boost 2 boost controller, Deatschwerks 95lb Fuel Injector Upgrade
JBA Performance Exhaust Co.: JBA 06-11 Z06 Catted X-pipe for JBA Longtube Headers
JMS Chip & Performance: FuelMAX V2 Fuel Pump Voltage Booster Kits
JMS Chip & Performance: JMS Launchmax Trans-Brake
Kimberly-Clark Professional: Scott Heavy Duty Shop Towels, Blue, 60ct Roll
MSD Ignition: Two Step Launch Controller, Black, Adjustable, Ford 5.0 Modular, Each
The Dyno Edge: New Mexico S #1 Performance Tuning Facility
The Industrial Depot: Fasteners, Hardware, and Shop Supplies

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 820

@AlicesWondereland 4 года назад

I watched this whole thing hoping to see it at the strip. But I got a paper towel ad.

@rhubarbpie2027 4 года назад

F. 😂

@springwoodslasher79 4 года назад

This old fart will never drag it or even rip on it. How many people you see that age driving fast. Pointless ass build that will never get used and then sold because he doesn't give a shit.

@thomasgray3847 4 года назад

@@springwoodslasher79 how da fuck you know? He said he was so that's good enough, if you think any different go in build you a car to race on the strip. Sounds like you a jealous ass hater.

@nate0765 4 года назад

@@springwoodslasher79 what did he do to piss you off?

@chancewindham1718 4 года назад

@@springwoodslasher79 damn you salty as fuck

@rhubarbpie2027 4 года назад

That oil pan tap setup looks like it was designed at 4:30pm on a Friday 😥😥😥

@andytommykeddy3224 4 года назад

Rhubarb Pie they didn’t even take the oil pan off

@rhubarbpie2027 4 года назад

@@andytommykeddy3224 "yo dawg, we heard you like metal chips in your engine"

@beany1987 4 года назад

I really hope they took that pan off unless they want him back for a engine rebuild when it blows up 😂😂😂

@rhubarbpie2027 4 года назад

@@beany1987 shit, that ought to get a repeat visit

@Highstranger951 4 года назад

The inexperience is apparent in these comments. It’s a stamped steel pan, they used a punch specifically for this reason. Also makes its own bung to cut threads in with the displaced metal. Notice the grease on the tap? That’s to contain any small chips. This is a new engine and already has metal in the oil, the few odd chips that may have gotten in there are not gonna make a difference.

@Edriklongtail 4 года назад

Today on horsepower t.v we see what happens when you drop 12 grand into a brand new car

@maximusvonce1381 4 года назад

True

@decembersveryown5935 4 года назад

Why would you wanna watch a someome put $500 into a piece of shit?

@gabbag777 4 года назад

December's Very Own you ever watch boosted Bois? I love watching all their cheap projects and shit, eBay turbos, etc.. I think cheap build videos are just as much fun to watch as expensive ass full builds my guy

@JustWasted3HoursHere 4 года назад

To be fair, these car projects, by and large, are not for shade tree mechanics but for people with a lot of $$$ in the bank.

@Sevalen 4 года назад

Not a bad return on investment tbh 12 k and you double ( at least) your HP. A new mustang GT is like 30 -40k depending on options and if you add a $12k twin turbo kit you pretty much get a 800whp monster for roughly $50k that can pretty much smoke anything in it's class. I know it's a huge cost upfront but damn if you don't get results.

@scarroll625 4 года назад

Nothing says “I woke up too early on the weekend” like this show.

@luxuriousranked336 4 года назад

15:55 the owner pointing to the excessive white smoke coming out of his car

@maximusvonce1381 4 года назад

Oil or rings are fcked. Burned a piston

@zachbrown7272 4 года назад

probably just burning out the oil on the exhaust that keeps it from rusting during shipping

@sstevocamaro 4 года назад

That’s tire smoke

@robinesavage404 4 года назад

@@sstevocamaro how did they not catch all of the tires spinning on the dyno talk? Lol

@JustWasted3HoursHere 4 года назад

@@robinesavage404 Eh? They torqued the car down more and added extra weight to the trunk because of the tires spinning during the dyno talk. That wasn't enough to completely stop the tires from spinning, as we see tire smoke on the last run, too.

@matthewg3056 4 года назад

remember the good old days when you could be satisfied with a naturally aspirated engine and a few bolt-ons? now youre just gonna get smoked by some old geezer with too much money and too many engines to blow.

@kalijasin 3 года назад

Those were the days. 🙊

@Carlos.Rivera 3 года назад

Its called pay to win

@bernieg7355 3 года назад

I'm still happy with my n/a engine with only boltons!!

@crimsonstang 4 года назад

I dynoed my stock 2018 A10 Mustang in Nashville in June and made 422 wheel hp. That's a huge increased from the 15-17 Gen 2 Coyote.

@edthomas8486 4 года назад

CrimsonStang What make of Dyno? That is very impressive especially with an auto.

@02autogt 4 года назад

Very happy Dyno...

@waic1639 4 года назад

Ford has been known to underrate cars hp ratings occasionally, they did that with the Terminator Cobra. Congrats on those numbers!

@skipjohnson9358 4 года назад

Wish that was my grand dad 😂😂😂

@bigdog1476 4 года назад

It’s still 100 hp less than the blue one.

@georgehuerta1990 3 года назад

You’re right I like the boss better

@fordnut4914 2 года назад

Lol I like the old guy wanting to still have fun in life. Living life everyday like it's his last.👍

@Eslamizar 4 года назад

I would have kept the blue BOSS 302.... that's just me.

@cljerjr31 4 года назад

Agreed! The 302 is a destined classic.

@sergeysmelnik 4 года назад

Theyre cool and the second best s197 after the 2013 gt500 but the S550 looks ten times better being wider and lower and no ugly retro.

@02autogt 4 года назад

@@sergeysmelnik an S550 looks like a slightly retarded Ford Focus... Catfishesque, LMAO!!

@85square 4 года назад

and less power now

@seancolon9890 4 года назад

Lmao.. Love the part were the owners sees all the smoke pouring out the back and points but the guys just ignore him..

@Maddog12579 4 года назад

its tyre smoke not exhaust smoke dude

@trillrifaxegrindor4411 4 года назад

too much power,tires were spinning.

@KasbashPlays 4 года назад

I don't know if there are any Donut Media fans here but the moment he says "Most Power" at 4:34, I literally went "MO POWA BABEH!". I'll be on my way now.

@enriquemuniz305 4 года назад

Ashwath Nair yep

@DirtyPSI_Evo 4 года назад

This engine and transmission will take this power and more. Its amazing how well engineered this platform is. The only thing that I would invest in, if I were him and its available, is converting the fuel system to run e-85 for that extra safety measure and upgrade the oil pump gears.

@bravejango12 4 года назад

Wait you drilled and tapped an oil pan with out removing it from the car? I hole this old guy doesn't get metal shavings in his engine.

@hendrahendra 4 года назад

IKR

@toddfrasco6569 4 года назад

The oil pan is plastic

@TheKiltedYaksman1 4 года назад

@@toddfrasco6569 Did you watch the video where they hammered a tool through the sheet metal pan?

@SaturnTwinCam 4 года назад

Please don't hole the old guy, lol

@colind9638 4 года назад

Joe Figueroa What about when they cut the thread?

@fast02gt 4 года назад

That x pipe off the turbo is nasty!

@hmackprotection1 4 года назад

That old man is cool as hell 👊🏾

@FlatPlaneCranky 4 года назад

I love my 2017 Mustang GT custom Whipple. It was so easy to hit 700+ whp. And the most fun I’ve ever had building a car!! Looking forward to my next TT project in F-150 Coyote form.

@AnthonySvt_ 4 года назад

Will Jeff don’t forget to replace the oil pump gears

@FlatPlaneCranky 4 года назад

El_De_La_Lobo did it on my mustang, and do it on my F150. The F-150 will get the Mustang coyote upgraded pump housing along with the thicker gears. Thanks for the recommend:)

@trombettafamily9008 4 года назад

That boss was so much better then the banana and faster. Old man lost his marbles.

@tylerenkey9720 4 года назад

I’m laughing that the old man sold his boss to “upgrade” to a 15. Literally laughing out loud.

@tavianhorton281 3 года назад

Me to man

@benjaminford8173 3 года назад

Yeah my guess was he wanted to get an auto car, instead of keeping the boss with its stick.

@VermillionRacing 2 года назад

The 15 has better handling and he may have wanted an auto. Also personal, preference but o like the s550 body a lot better (but the grabber blue color would have made it perfect)

@adamcosta4610 4 года назад

Beautiful engineering from Hellion

@DaBrute 4 года назад

Who runs 42 psi in drag radials anyway?😂

@SlickRick214 4 года назад

Wtf right, 38 psi also.... I would put 25psi and work my way down to the sweet spot

@TheMattc999 4 года назад

bdpa kaknox not boost, tire pressure. 42psi. Try running about 24 and see what happens.

@heyitsdurancitooo5212 4 года назад

Right like they gonna spin bad at launch like at least run 20 psi and work down to the sweet spot but damn 42 psi in drag radials like smh0

@dragoonTT 4 года назад

@@PiperFishing Read first.

@turbosaleen347 4 года назад

Because the lower you go on tire pressure the lower the dyno is going to read.. best thing is a straight up none drag radial with high tire pressure to get good dyno numbers .. an easy way to prove this if you don’t believe me is go dyno your car with a regular radial tire at 45 psi .. then toss on some drag Radials at about 25psi and let me know what the difference is .. my car made about 40 less rwhp with drag radials at low pressure. 😪😪

@fishnhunt2187 4 года назад

not going to clean the metal shavings out of the oil pan ..?!?!?!? REALLY?!?!?!? come on guys your better then that

@bigsean2473 4 года назад

they dont show everything they do as time wont allow,or it would be like 5 parts to this.

@jdmcarboy64 4 года назад

Probably has a magnetic drain plug 🤷🏻‍♂️

@trillrifaxegrindor4411 4 года назад

idiotfuck,this is common to every single bolt on turbo and supercharger install.ist,see the grease? also,look up rollform tapping dumbass

@kevinwiltshire2217 4 года назад

Just put a whipple on it and get rid of all that spaghetti

@Sleeper_Solutions 2 года назад

I like how he said he sold the boss to get a 15’ base model. Should’ve kept the boss.

@KidDynamite6 2 года назад

it will not only launch “this pony” through the roof but also into the crowds 😎 but all jokes aside thats a beautiful turbo kit

@m3gumby 4 года назад

I forgot my pen, can I borrow one from that Office Depot on your shirt?

@yungtooli 3 года назад

no then he’ll only have 14 left

@tomasrjscrrd 4 года назад

few videos impress me, but this one is on another level, excellent job

@stantate1747 4 года назад

Ol Yeller is a BEAST!!!! AMAZING

@terraboundmisfit 4 года назад

Does he truly have the will to use it?

@whippled18gt 4 года назад

Great install and killer power!! Drag radials aren’t for the dyno! I think MT actually voids warranty if you do use on dyno

@anthonyku9008 4 года назад

Faster to hit crowds at cars and coffee

@KillSwitchNY 4 года назад

That X pipe is friggin sick. Actually all the hot side looks great.

@godspeedsendit9610 4 года назад

Void that warranty 😎😎

@waynewilliams1726 4 года назад

That's a 2015, he's a year past warranty.

@RetroCheater81 4 года назад

@@waynewilliams1726 the video was made in 2015 though

@waynewilliams1726 4 года назад

@@RetroCheater81 Probably, but it was just posted today

@RetroCheater81 4 года назад

@@waynewilliams1726 18:36 it shows the video was made in 2015. Most of the videos on this RU-vid channel are older. Ive seen some as old as 2008.

@Rob-tr1st 4 года назад

Hahaha yep!

@themanualmindset2868 4 года назад

Running around docile with chrome drag wheels and drag radials. Really docile looking 👌 .

@bhollingsworth 4 года назад

Old man has more money to spend than he knows what to do with.

@revolutionday1 4 года назад

Well, when you "can't get it up anymore", I'm sure it frees up a lotta finances.

@bmstylee 4 года назад

Hey. Get an education. Find a good job. Work hard. Be fiscally responsible. Then you too can afford nice things.

@MrDrBlahh 4 года назад

Ya make it sound like that is a bad thing or that he shouldnt be allowed to. Anyone can do that if ya have a good job or career.

@decembersveryown5935 4 года назад

Or just great credit.

@Chef-James Год назад

Jealous?

@dennislangston487 4 года назад

Personally , I liked the way they did the oil pan taps. The only metal lost would be a tiny amount from thread cutting which would settle to the bottom and be collected by the drain plug magnet. If any happened to go through the system , it would be caught by the filter. In my opinion , much less chance of problems than pulling the pan and welding on fittings. I think many of the commenters missed the fact that the drill bit didn't go all the way through , but only close enough for the punch to finish making the hole and leave a good base for cutting threads.

@Scrapla1 10 месяцев назад

Good point. Yea I was like oh no when they were drilling but then noticed they didn't go all the way through

@jameskirchner2655 Год назад

Love these shows

@yeahitskimmel 3 года назад

That technique of using a punch to avoid shrapnel in the pan seems pretty clever, much easier than pulling the pan. Wonder how they hold

@BIGTONY2132001 4 года назад

You don't need a car like that to beat kids at the dragstrip, you tree em while they are playing with their phone at the starting line!!!

@avrahambrea1919 4 года назад

All on a stock engine? Pretty impressive

@twany442 4 года назад

Mike Galley could be the next commentator for MotorTrend.

@edwardmyers1746 4 года назад

Is it bad that I wanted to watch this so much, i watched in the shower? Car guy life LOL

@familyguy1674 4 года назад

I gave a thumbs up simply because of the cool old guy!

@Dakktyrel 4 года назад

Are we to assume that all of the internal components are rated for this type of abuse? I have no doubt it can handle it for a little while but will wear out very quickly.

@Thelongmanable 4 года назад

AS long as heat doesn't get to high it should be fine but I doubt he is daily driven it...

@BigEightiesNewWave 4 года назад

It will blow up...should have a lower static compression.

@Thelongmanable 4 года назад

Buff Barnaby *_LOWER STATIC COMPRESSION EQUAL LOWER HP AND DOES ABSOLUTELY NOTHING BUT THROWS MONEY AWAY!!!!!_*

@EPICYELLOWHORSE 4 года назад

I done this with a 2v and made 725rwhp. The engine internals literally fell apart. Oh, not the mention the transmission granaded. After I rebuilt everything and had it all back together I had spent 65K. True story

@Thelongmanable 4 года назад

Burrell1 *_Sounds like your driving had more to do with it.._*

@kenshinhimura9387 4 года назад

Too bad in 2019 no young "kids" can afford anything remotely fast. So have fun racing against nobody but yourself.

@ramonlevario12 4 года назад

Or the fact that that if you're wanting to be fast you gotta run below a 10 second pass... I miss the days that a 12-13 second was considered a fast Street demon.

@Thelongmanable 4 года назад

Kenshin Himura I don't know ford sold 127,000 mustang's in 2017 globally so someone buying them. The haven't seen a sell of any car like that since the 1984 Pontiac Fiero at 135,000..

@cryptsys 4 года назад

@@Thelongmanable still makes it only 1 mustang in every 2,674 people in america at the 86,000 US sales. then you have to figure the number that were v8 and not the ricer i4 or wifeys v6

@Thelongmanable 4 года назад

True but Mustang is the only muscle car to ever achieve such a feet.

@MF-Rell 4 года назад

@YOYO MA where do you live lol, A bunch of younger guys got em where im from.

@veenoable 4 года назад

You guys are making cars to have 800hp like a cake.. I am trying to make 2hp and its been a havoc life for me..

@ericdincauze3984 2 года назад

LOL ... his old Blue Boss did 910 HP ... oooops!

@unkjason 3 года назад

That old man probably drives below the speed limit on the interstate

@EPICYELLOWHORSE 4 года назад

Highly, highly, highly impressive! 🤯

@supra6t9 4 года назад

hell yeah cool old timer

@waic1639 4 года назад

Pretty cool that they made an Ecoboost V8 here!

@Sabotfit5oh 2 года назад

Awesome guys well done, now he has to drive around with 250lbs of extra weight in the trunk to get that 800HP.

@freddylaurens6098 2 месяца назад

Chris the tuner was pissed.he wanted to up the boost and hit that 1000 mark

@BobbyOfEarth 4 года назад

I couldn't believe my ears when Mike said the Mustang had 20% parasitic loss, but I figured it out, ..they're engine builders, not mathematicians. Mustang parasitic loss: (RWHP 363) / (BHP 435) = 16.552%

@dawsonschuller4629 4 года назад

My neighbor owns Circle D transmission. Pretty cool.

@carlosv.118 4 года назад

That boss doesn’t even have a coyote it’s a road runner lol

@jonanderson4755 4 года назад

Yup

@michaelharris748 4 года назад

While technically it is called a roadrunner engine by the Ford Executives who made it it's technically still a coyote based engine just like the GT350 engine they're all the same thing what's different hard parts putting them together all their parts will interchange on to one another so in my eyes they're the same engine

@carlosv.118 4 года назад

Jon Anderson the gt350 is not a coyote it’s a voodoo engine

@michaelharris748 4 года назад

@@carlosv.118 i know what it is...it is a coyote BASED engine...its just a different variation of it and they call it the voodoo...it has the flat plane and it has different higher flowing heads, among other things but essentially its a modded coyote. Its bored out, different internals, heads, crank, intake, among other things but its still a coyote based engine. The 5.4/5.8 dohc in the gt500s is a totally different engine...the heads wont interchange neither will the intake and other things like that...totally different engine...but the voodoo and coyote can both interchange parts because they are both COYOTE BASED engines...which is what i said and i stand by it.

@jonanderson4755 4 года назад

@@carlosv.118 thus why I said "yep" to your comment.

@flfun1684 3 года назад

Steeda wheel hop elemination kit will stiffen up that independent rear differential.. More power to the road on that 2015 Mustang

@justinm6110 3 года назад

The old man shoulda kept the Boss 302 car

@colealexander8633 4 года назад

“To beat the young kids at the strip”

@728GT 2 года назад

RIP N Guage

@stevereinhart4067 4 года назад

Love how they don't give the price of all this easy horsepower.

@stlchucko 4 года назад

Since it likely costs well over $10k

@maximusvonce1381 4 года назад

$20k and another $15k when stock motor blows

@bigsean2473 4 года назад

google is your friend. it will give you all the info you need. those turbo kits are 8 -10k

@cljerjr31 4 года назад

I like the boss 302!

@starcloakstarside9719 4 года назад

Fair. Turbo and Stroking is okay, but I prefer to be blown. Superchargers are where it’s at. And yes, that was very much supposed to sound dirty.

@matthewpate154 4 года назад

Imagine doing a turbo on your dodge to 20 more Horsepower then a dead stock 5.0 😂

@ohboy2592 3 года назад

Math isn’t your strong suit🤦‍♂️🤦‍♂️🤦‍♂️. You might want to use a calculator and try again.

@Hamza-or7jm 4 года назад

Valve float hear we come, yeehaw! Look at the turbo charge pipe going in to the throttle body man that thing is gonna pop off, no need for a blow off valve. Wheel hop city.

@jonanderson4755 4 года назад

Lmao

@bigsean2473 4 года назад

how you knw you seen somebody with this set up??? all cars are not the same. just because you seen a 2011 do that dont mean this 2015 will

@jakebraun6376 4 года назад

"Hey guys, let's buy a car no kids can afford, dump $15k into it, then laugh at them because their $500 Honda isn't as fast"

@Texarmageddon 4 года назад

The kids that have no guidance that want handouts

@mikesnyder6481 4 года назад

The Boss 302 motor is not a "Coyote" it is referred to as the "Roadrunner".

@tjsMAR 4 года назад

Albuquerque Represent!

@michaelmeyer9665 2 года назад

It's still a mousestink!

@Harley.Davidson Год назад

"Capable of 8.50 quarter mile!" 🤔 Did it say that in the directons? If this Pony comes in at under 1000 HP your doing it wrong. 🤣

@Raorl173 4 года назад

Holly shit man, that oil pan whole seems like it’s done by the pimp my ride people WTF!

@weaklingv2 4 года назад

Wooo Burque!

@jonwojcik4494 4 года назад

I'm kinda partial to this mustang, except I chose a windscreen for my boost!

@clevelandmaker386 4 года назад

watching a rich old man add power to his toys

@joshc606 4 года назад

So many “pros” and critics in the comments....smh.

@projectocamero7502 4 года назад

Gotta have balls to tap and drill into the oil pan without removing it lol 😂 Maybe that's why all the white smoke

@SDMF5000 4 года назад

Nana, Grandpa is spending the inheritance again.

@davesracingchannel9261 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UArCfsf-JhI.html

@cljerjr31 4 года назад

Well played

@DANNYN224 4 года назад

nice build and car too for an automatic not bad

@bigsean2473 4 года назад

what you mean for an automatic not bad?? they out do manuals all day. the new trans are tuned and run by computer a manual cant touch them. there is a video of 2 zr1s racing auto vs manual, auto left him by links

@MrUltraworld 4 года назад

The stock trans and diff will not survive hard launches on a prepped drag strip.

@rsswga 4 года назад

dude..did you see who the owner was....money bags

@TheLightningSt0rm 4 года назад

The 6R80 is surprisingly well built and holds a lot. I have friends making similar power on vortech systems and it’s held just fine. No diff problems either

@kingssuck06 4 года назад

Ford 8.8? Come on man those things are made for the strip.

@seleckt6600 4 года назад

This title reads like someone got their ass cheeks clapped by a civic driven by a 17 year old and is now spiraling through a midlife crisis.

@samuelmcgarvey9530 4 года назад

To be fair I'd react the same way.

@Thelongmanable 4 года назад

*_THAT COULD HANDLE 20PLUS PSI... NICE JOB SAND BAGGING!!!!_*

@Stephen-br6il 4 года назад

I love that blue Boss.

@theoriginal_sb7045 4 года назад

i wouldn’t have sold the boss 302 bc if the roadrunner 5.0 but i do like the s550 and the s550 motor is pretty close to the roadrunner..maybe i’m just hating bc i can’t even afford one😂

@EDHBlvd 4 года назад

RON is a legend.

@scottcisek2376 4 года назад

man i hope im that badass when im old lol

@codydemmitt3916 4 года назад

Is it me or does it look like these new Mustangs got too close to a bonfire and melted

@FreddyFunderbunz 4 года назад

They've got the body lines of a jelly bean

@vxnova1 4 года назад

72 hp loss, I have driven cars with less than 72 hp.

@BigEightiesNewWave 4 года назад

My 61 VW was 36HP...drove it to college.

@brendanschriber3242 4 года назад

You beast...

@ImNotADeeJay 4 года назад

my Opel Corsa has 90hp. But this is Spain, driving around a 5.0 V8 would cost a fortune in gas. Gas is cheap in america, so automakers don't bother squeezing horsepower from small engines.

@kennethelliott5985 4 года назад

$17000 worth of stuff it better be fast

@lewisdeclouette6342 4 года назад

Hey y'all really know how to make me happy let's take it to the dance to the Dragstrip

@Babytwin_ 4 года назад

💪🏽she rips bro

@ttjesus4542 4 года назад

One day I’ll twin my 15’ coyote. For now I’ll be naturally aspirated and save up lol

@twinsandboost191 2 года назад

Congrats on boosting your stang

@tankeater Год назад

Blowoff valves at a 90 degree angle with kits like that frustrate me so bad... o, yah, definitely sounds like a good idea to have something that senses pressure at THE WORST ANGLE TO THE FLOW OF AIR.......

@ccchicken8889 3 года назад

So that's what Fred Durst is up to these days.

@Kwtints 4 года назад

Lol this old man be the type to take a car into the shop ask to build it to specifically race the people in the comment section.

@enso3140 4 года назад

grandpa over there is gonna gap them kids

@kenjohnson9498 4 года назад

OK. 818 HP at the wheels + 20 percent drive-line loss = 1022 HP at the flywheel /// OMG WOW

@mjs28s 4 года назад

@3:29 um....the loss is based no flywheel hp not tire horse power. it is 20% when you take 72hp / 363hp. However, your parasitic loss is actually: 72hp / 435hp at fly wheel, or 16.6%

@edthomas8486 4 года назад

mjs28s nice pick up. These guys are morons. What worries me is that you were the only viewer to pass comment. I thought that someone interested in any power adding or for that fact just a standard vehicle would understand drivetrain loss(parasitic loss) and how it has been cut down to about 13% on some of the newer vehicles.

@antz19coyote73 Месяц назад

The Dummy sold a Boss w/ a Forged bottom end to TT a Gen 2 w/ less potential. 😂

@coloradokid808 4 года назад

I would be more concerned with the stock rods that are @ 12:1 compression, being able to handle all that stress. The oil pump gears usually fail due to higher RPM, over 7000 is too much for a stock oil pump, stay under 7 grand and you are relatively safe. also they didn't put any oil catchers on the pcv lines, tuning will suffer from all that blow by oil it can also cause cylinder detonation.

@jayyoutube8790 4 года назад

So they spent $12,000 (roughly) in parts? Can you get the same performance if you would of paid $12,000 more for a new one? (Whatever the next higher model is?)