What No One Tells You About Engine Swaps! Best Engine To Pick?

Подписаться 425 тыс.

Просмотров 371 тыс.

50% 1

Use code QUESTIONABLE50 to get 50% off your first Factor box at bit.ly/3wQZbiR!
Join this channel to get access to perks:
/ @thequestionablegarage
Subscribe to The Questionable Garage ► bit.ly/2D4iSp8
Buy our NEW shirts and merch!► www.bunkerbranding.com/pages/...
Follow us on Instagram ► / thequestionablegarage
------------------------------------------------------------------------------------------
Today Jared uses his experience building the 1970 Plymouth Duster TriHard for the Holley Triple Crown to help you decide which engine is best for your swap. He goes into the history of the GM LS engine, The Mopar GEN III Hemi, and the Ford Coyote engine.
Looking at the costs of each, the ability to make lots of horse power, and relative ease of installing them, the goal is to help you make the best choice when it comes to the right engine for your swap!
------------------------------------------------------------------------------------------
Questions? Comments? Business inquiries? Email us at jared@thequestionablegarage.com
Don't have internet and want to send us something? Here is our new P.O. Box!
Wrench Every Day
P.O. Box 437
Lula, GA 30554
------------------------------------------------------------------------------------------
Facebook ► / @thequestionablegarage
Instagram ► / thequestionablegarge
Jared on Social:
Instagram ► / jaredpink
Twitter ► / thejaredpink
Links to our partners:
Need oil? It has to be Valvoline! Find the right product here! team.valvolineglobal.com/prod...
Have a wiring project? Our Friends at WireCare have you covered!
www.wirecare.com
Need speed parts? The Holley product line has you covered!
www.holley.com

Авто/Мото

Опубликовано:

26 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,5 тыс.

@TheQuestionableGarage 7 месяцев назад

Use code QUESTIONABLE50 to get 50% off your first Factor box at bit.ly/3wQZbiR!

@Beer_Dad1975 7 месяцев назад

Jared, people don't ASK, they irrationally argue about which engine is the BEST EVAAAAR!!! without any nuance that each one has its place. Hey, it's the internet, that's how it works! 😀 Wishing you a speedy recovery from your surgery.

@styx0_048 7 месяцев назад

Not to be nitpicky but the Mustangs had the 5.0 in 95. 96 was the first year of the 4.6 modular engine

@harrywalker968 7 месяцев назад

i want reliability, ease of mantenance, & a big smile.. so,, for the past 50 yrs,, ive only bought 351c.. you put this engine on lpg, with 302c heads. no mods.. you got a winner.. bronco has this engine 16 yrs, no issues.. & fast..

@harrywalker968 7 месяцев назад

oh,,, forgot,, ausie.. our 351c xy ho. with 4 sp factory.. would do 160 mph.. not advertised as kids would kill themselves..

@harrywalker968 7 месяцев назад

biggest factor.. is what internal problems they have like the LS has 4 i know of. oil, cam, cam bearings, ect.. dodge had the cam c clip prob. cyoti,,no thanks.. ill keep my clevo..

@thepastorvan 7 месяцев назад

"Each engine has to go in it's family..." There are Ford Guys, Chevy guys, Mopar guys, etc, and then there are Car guys. Nothing wrong with any of them, but the Car guys are the ones I like the best because they are the ones that always do the craziest, best stuff with their vehicles.

@TheQuestionableGarage 7 месяцев назад

Well said!

@cargotoolshop5319 6 месяцев назад

I'm a car guy, I own all three, I don't represent Ford very well but love rangers and mustangs, and pre 79 trucks, have tons of second Gen dodges, and everything Chevy, I got a 1990 dodge 1500 RWD with a bad tranny, engine sucked, but dodge makes good stuff, but it was throttle body feed fuel injected, my neighbor said just put a Chevy 350 into it, how much I regret not. Putting a 350 into it, it was just a horrible truck

@terrywalchuk4793 6 месяцев назад

Well said 👍

@rossembry5990 6 месяцев назад

😮E😮÷Everything 😮÷to e😮e😮e😮eq9]😊

@kareemhailey9585 6 месяцев назад

I’m definitely a car guy but the funny thing about being competitive is you always think that yours is the best until it’s proven

@oscartango2348 6 месяцев назад

I swapped a 5.7 liter Hemi into my 1972 Datsun 510. Of course I had to modify a periscope from a decommissioned submarine, and install it to allow me to see the road from the drivers seat. WORTH IT!!

@paulcarter2879 3 месяца назад

I'm going to start off with acknowledging this is a dumb question, but did you have to cut/modify the firewall? How hard of a job was this, what transmission, rear end, and suspension parts did you use. Only reason for my inquiry is I purchased a 1981 Datsun 510 wagon last fall and am wide open for any info I can get. It's my first foreign project car, being I've always been more into the big 3, muscle cars, and trucks all from the 60's to 90's.

@TheAcfallejoseph 2 месяца назад

Fuck yeah

@rennkafer13 7 месяцев назад

Great comparison! I just picked up a wrecked '16 Challenger to swap the 5.7/8HP70 into my '71 Coronet (currently 318/2V). Even if I leave it bone stock it's over double the hp and about 60% more torque. Given the Coronet weighs ~900lbs less than a modern Challenger/Charger it should be amusing.

@SchoolforHackers 6 месяцев назад

And it’s a beauty car.

@jo-qp7mz 6 месяцев назад

Better upgrade the oil pump or it will look like every new dodge broken down due to lifter/ cam issue that stem from poor oil pressure

@rennkafer13 6 месяцев назад

@@jo-qp7mz the issue isn't the oil pump from my research, it's the MDS system, which IS getting deleted. I may throw on a new pump though just as a precaution as the car was in a pretty serious collision.

@hewlett260 6 месяцев назад

@@rennkafer13it's an oil volume issue. Avoid long idle times and do regular maintenance and you shouldn't get the issue. Something else to keep in mind, the supposed "common" issue has only affected ~1% of these engines.

@ufarkingicehole 6 месяцев назад

Have you considered stroking the 318 to a 390?

@_Napoletano_ 6 месяцев назад

Im a mopar guy from a toddler but you got to give it to GM, they made their LS accessible and versatile. You can put a LS in anything. You cant really do that with the hemi and coyote.

@PyroBlonde7777 5 месяцев назад

They made a cheap wedge head with engineering stolen from Chrysler small blocks. From the rocker shafts to the skirted block. Yes, it is a compact affordable package. But thats because it has inferior heads and a weaker aluminum block. I'll stick to the Hemis, thanks.

@tonychasey7990 5 месяцев назад

The ls thing is so way overdone. I get so tired of seeing virtually everything with an LS swap in it. Yes, they are cheaper and easy to find. But, to me, it shows a little bit of a lack of imagination, and following the crowd. I am definitely a Mopar guy and will always be! The one thing good that I can say about the LS engine is also a fact of the hemi. At least both Ford and Mopar stuck with a push rod engine. Best way to make low end power and high-end power as well. It's also a bonus that they are both cheaper to manufacture. People can keep their LS engines. If I were to be given one I would sell it

@BruceLee-xn3nn 4 месяца назад

You can go blindfolded to a junkyard and still find an LS for your project.

@PyroBlonde7777 4 месяца назад

@@BruceLee-xn3nn the same can be said for your average 5.7 lol. There really is no reason to run an LS over the Hemi unless you need the smallest engine possible. Eagle and Apache heads far outflow the LS or LT at every point of lift.

@XxMusclecarsxX 3 месяца назад

Ls having the same bolt pattern as the small and big blocks is a giant deal. They'll go in anything, boats, trucks ,etc

@ProjectFairmont 6 месяцев назад

The Modular motor 2v 4.6 was introduced in ‘91 in the Lincoln Town Car. ‘92 in the Crown Vic, and ‘96 in the Mustang. The Aluminum block 4v 4.6 was introduced in the ‘93 Lincoln MkVIII and then the ‘96 Mustang SVT Cobra. The 2v 4.6 was introduced in the ‘97 F150, and the 2v 5.4 debuted the same year in the F250. The only 5.4 in a Mustang was the hand built SVT 4v for the racing intended Mustang Cobra R. There was a 4v 5.4 iron block used in the early 2000s Lincoln Navigator.

@raymondturner6784 2 месяца назад

The 4 valve 4.6 was also used in the Lincoln Continental.

@vernonlemoignan1392 2 месяца назад

I believe there were 2 f-250s in 97. The new f150 body style came out that year, but the new superduty was still a couple years away. The 250/350 were still the early 90’s body with pushrod v-8s. Ford made the f250 “light duty” using the f150 body, beefed up frame, suspension and diff. These trucks used the 5.4 2v modular SOHC V8. After the superduty debuted in 1999 the f150 light duty continued to be made until 2003 , called the f150 7700.

@JohnDove Месяц назад

Thank you for clarifying. He was killing me with the wrong info on the modular.

@timothystark697 7 месяцев назад

As a "Ford guy" I can't disagree. I love the Coyote, but as a swap motor, it is a difficult choice. It's so expensive and large it doesn't work everywhere like the LS. What Jared is not mentioning is how easy it is to get monster HP figures with the Coyote. A simple blower and oiling gear will put you way higher HP and more reliable than the same mods to an LS. Cleetus has proved this.

@sofielee4122 7 месяцев назад

also worth mentioning, coyote is best with an NA build, they can take 100 hp/L without really caring, which is simply way way harder to do with a pushrod design because you're capped at a relatively low RPM. Coyotes will take upwards of 8250 rpm all day, LS'es and Hemis simply wont.

@harrywalker968 7 месяцев назад

as a ford guy,, the only engine to buy, is a 351c.. period. look up falcon xy gt ho.. 160 mph, std.. 1 cam, no fkn computer... ausie.. [ i also own a dodge challenger 340 r/t.. thanks..]

@corystansbury 7 месяцев назад

I think Cleetus has more so proved that you can't punch every LS out to 427 and run crazy cylinder pressures.

@danrid1982 7 месяцев назад

Jared should have went with a godzilla instead of Coyote for more apples to apples comparison.

@alanmeadows4056 7 месяцев назад

The high rpm of the coyotes makes my heart go "weeeee" but my bank account really likes LS swaps.

@DustinHasVideos 7 месяцев назад

Factors To Consider: rearrange the questions and the anagram is MEME SWAP which is fitting and easy to remember

@Stretch843 3 месяца назад

I wish there was a way to search for Mopar comments. I was always in aww and blessed to watch my daddy roll old Dusters, Aspen, and all kinds of Dodge, Plymouth and Chryslers into the back yard and rebuild them from the ground up and turn them into Championship cars for the Local circle track. Some cars I have never heard of or seen other than in my back yard growing up. Mopar=More Power! Not late model classes but 1-2 class below that (it's got different names) called (1) Thunder & Lightening and Charger Class(2). He would tell me all the time as a kid that he had the same amount of money in the whole car as competition had in their engines(mostly Chevys) and competed to win or won every week. He was the only won that raced Dodges other than one guy that ran Dodges in Late Model and S. Trucks. He didnt want me to become a mechanic so wouldnt teach me much, so i tried to watch and absorb as much as possible in my first 25 years. Alot of history and great stories died when he did. My daddy trained/taught the majority of the good mechanics in Charleston SC. Sucks I didn't have more time and sense to tap into his endless knowledge and resources. They Dont make men like that no more!

@chrisej5987 7 месяцев назад

I don't like to admit it but the coyote has the most distinctive sound which I always appreciate 😅

@chiefdenis 6 месяцев назад

Yeah, i love the sound

@shred1894 6 месяцев назад

It's the only engine of the three that has a howl.

@jibrilthegreat35 2 месяца назад

I love the sound pf the coyote too, better than the others

@vater1760 7 месяцев назад

I 100% feel your pain. I just had half my mouth rebuilt this morning at the dentist, and my face feels like I had a round with Tyson. I hope you have a speedy recovery, Mr. Pink. Love your content! Your attention to detail and doing the job correctly sold me on your(well, back when you were with T) channel.

@distantcomets 7 месяцев назад

Congrats on winding down a brilliant series. You did all the things! American iron isn't even my thing but I've loved this set of builds and comparison! Very enlightening and quite fascinating. On to the next!

@M4A3 6 месяцев назад

Engine masters took a Eagle Hemi from a Ram, added long tube headers and a comp cam. With the stock intake, it made 500 hp.

@likenem 7 месяцев назад

If you get a truck Coyote, get the 2015 and up f150 because the Gen 2 and 3 Coyotes have better bottom ends. Also if you plan to stay Naturally aspirated get a mustang Coyote because they have better cams and a Cam job on a Coyote is expensive. You dont need to upgrade the Oil pump gears. They break when you bounce it off the rev limiter. Have your tuner put a soft rev limiter in, where it cuts gas.

@robfeldschun6146 3 месяца назад

The have better rods than a gen 1 mostly. Gen 3 got built in water jacket supports. I went fully forged Gen 3 with Gen 2 heads in my 2013 GT. We did some ego pulls and got easily 1100 wheel with a 3.0 whipple on e85. Turned it down to 900 for the street.

@robfeldschun6146 3 месяца назад

But you are one of the few people who are correct about the oil pump gears. Unless you’re bouncing off a limiter or a two-step, you don’t need oil pump gears. I’ve never known anyone to break theirs. Even dudes running mid 9’s with a completely stock, gen 2 motor. Best motor fords ever made Cheers

@likenem 3 месяца назад

@@robfeldschun6146 Roush has been selling boosted coyotes since 2011 with out changing the oil pump gears.

@mikeyfourbarrel8473 7 месяцев назад

I stayed Mopar for my swap with no regrets but I also have a gen 3 Coyote in my garage too and that engine is amazing. Depending on your build, it may be worth the trouble.

@deznuts1841 6 месяцев назад

U wanna sell your engine I gotta 3v I’m trynna swap?

@surferdude4487 5 месяцев назад

If you put the right gearing in, nothing sounds like the Coyote. But the project I want to do is a Fiero, so I'll be going with an LS4.

@crazylarryjr 7 месяцев назад

I'm a dodge guy so love the hemi, but respect all for their accessibility and tuneability. But if i were to build a car right now on my budget whatever body I start with, it'd have to have an LS in it, because of what you said about package size, availability as well as most of the aftermarket support.

@somefuckingprick 6 месяцев назад

LS should win-- If you factor in cost, availability, power, aftermarket parts support, reliability, size, weight. But thank God we have a choice of great engines to choose from 👍👍

@roadwarrior8213 7 месяцев назад

If you're a Ford loyalist you also now have the option of the Godzilla.. Which is basically Ford's version of the LS just more expensive, and nearly unavailable second hand as of yet. The Coyote is around 29 inches wide at the VC's. where as the Godzilla which has a 7.3 liter displacement is just over 24.5 inches wide at the VC's. Mind bottled!!

@redslate 6 месяцев назад

Saw mention of "Godzilla" elsewhere. Thought they were talking about the GTR. 😅 Ironically it took someone with a GTR avatar explaining this to make sense.

@PyroBlonde7777 5 месяцев назад

The Godzilla will get clapped by a small block Hemi anyway.

@TheRealJRealer 3 месяца назад

@@PyroBlonde77775.0s handle hemis no problem

@zanstrom686 2 месяца назад

The ls is a copy of the Ford windsor. So the godzilla is a copy of a ls which is a copy of a ford to begin with.

@gregorybarth930 2 месяца назад

Depends if your racing or towing...I agree on racing but when towing you need displacement

@dinopappas9769 6 месяцев назад

Great video.. Jared just as a correction the modular motor 4.6 did not come in the Mustang until 1996 up until that point it was the overhead valve 5.0. As for the rest of the Lincoln Mercury lineup it was developed in 1990 calendar year for the first model year of the 1991 town car.

@timrestuc8087 6 месяцев назад

Since the coyote is more the new kid on the block, I can't wait to see what comes of it. Ford is way late to the crate motor game, but seeing how much Ford's putting to it. Im really excited

@OttCanuck 7 месяцев назад

Thanks Jared for the engine lessons. Very informative video. Lots of knowledge to absorb. Much appreciated!

@cmdr_talikarni 7 месяцев назад

For most people cost is the #1 factor. Anyone can pick up an LS truck engine for $400 and spend $2000 in high end parts to have an amazing engine easily running 500-700hp. For the Coyote and Hemi, you're looking at minimum $2000 right out of the gate just for the engine, and then another $3-5K+ for the parts to get it to the same power level, plus spending twice as much time to get it there due to complicated nature of them.

@samadagoat7769 6 месяцев назад

Well most 5.0 engines come with over 400hp so it won’t be much to get to the 500hp mark .. a normal ls from a truck is around 300hp . A hemi is around 370hp it will coast most to build a hemi to get around 500 hp unless u go with a scat pack engine and that version isn’t competitive you can’t get big power out of them without swapping out the internals which is more expensive than just building a regular 5.7 hemi .. the 5.0 has the most potential and is the better option but the ls is cheaper and can still get as much power than both .. but still won’t handle as much power as a coyote .. the 5.0 is more expensive because it’s on another playing field in a league of its own .. you get what you pay for

@jedishaadu8343 6 месяцев назад

@@samadagoat7769I couldn't have said it better 👍🏾

@rickkowalske4116 4 месяца назад

Gets the same power level right out of the gate.read way more than the l.s.

@doofus401k...... 3 месяца назад

Nah 400 bucks for hemi running

@doofus401k...... 3 месяца назад

@@samadagoat7769damn actually like that point pf view

@nickthompson318 6 месяцев назад

I don't know about power but the Coyote in my service truck has 340k miles and has only had oil changes, an alternator and some coil packs replaced. I know it has slightly less compression and milder cams than the Mustang version but this has been a really good engine.

@joshperry2430 5 месяцев назад

I'm pretty certain that nobody is concerned with the engine repair cost on a truck pushing 400k miles. 😉

@joshperry2430 5 месяцев назад

@SpaceCoastMiniBikes a truck approaching 400k miles that needs engine work is most likely salvage yard bound. At that point, a new or different truck altogether is the more economical move. Yes, ls engines are cheaper in general.

@bkranz-1283 5 месяцев назад

@@SpaceCoastMiniBikes Well if an engine goes 400,000 miles I don’t think I really care how expensive it is to fix anymore. Time for a new truck. I have 3 relatives that blew up their ls trucks before 150k miles. Boop, $6k out the door to get their money’s worth out of the truck. That’s real world math, facts are facts.

@doctorlarry2273 7 месяцев назад

Good day, Jared. Hope you recover well and soon! This was an informative video for all gearheads (and even some of us that are not). A good comparison in a brief summary! I think I will just keep my 2JZ-GTE with a ported race head!! I was fortunate that you found that one and got it installed! BTW - I retired myself and the Supra from the road course a few years ago so they can both survive a bit longer!

@alman6581 7 месяцев назад

Thanks Jared - that really REALLY helped in an overview. I am a ricer/euro at heart, but love Hemi's - so this was great.

@BitHead1000 4 месяца назад

I mounted my coyote upside down. The tires rub a little on the valve covers during a tight turn. I have a deep sump intake manifold.

@jerkyturkey007 3 месяца назад

Did you have to increase the fuel pressure to defeat gravity through the intake manifold?

@jeffreylyons1531 7 месяцев назад

As a super anti ford guy I’ll say, if a coyote fits it’s definitely worth a thought, they are fantastic engines. My chassis only would take the LS or a k series so those are all I’ll ever consider.

@djmtndew 7 месяцев назад

If you can fit an ls. Check the Ford 6.8 and 7.3 super duty engines- they are very similarly sized to an ls.

@desertsavagery 6 месяцев назад

@@djmtndew dumb question time...7.3 Powerstroke or 7.3 Godzilla?

@djmtndew 6 месяцев назад

@@desertsavagery the Boss/Zilla gassers .. they are literally require 1.5 inches of height, 1.5in width and 1inch length more than an ls if I'm remembering correctly. There is no way you're fitting a 455 cu in International diesel into the Space of an ls. Never mind even if you could get the basic engine packaged in the same space which you couldn't no sir... You'd be unable to make any actual power because you wouldn't have room to plumb your intercooler and charge pipes. Then - you have the fact that any power you do manage to make if you make a 7.3 idi turbo or powerstroke. Fit you get charge air taken. Care of you manage to make power..... you will be giving it up to the huge weight penalty in the case of the diesel..... But the last thing is - we're talking like for like here apples for apples gas for gas.... I wouldn't put a diesel in anything other than a serious work truck or pulling tractor other wise I will always prefer gasoline and ethanol- I'm also interested in running LPG. But.... it waits until I get my license back.

@_wallnutz_ 6 месяцев назад

Import a Barra.

@guthrie_1 5 месяцев назад

@@djmtndew The Godzilla eats dog turds

@paulmac9634 7 месяцев назад

Jarrod, this was by far your best series. Congratulations on such a big accomplishment! Please make more cool content like this!

@MrBillsfishin 7 месяцев назад

Great video sir. I really appreciate all the great content you give us. Sure hope your recovery goes well. Not sure what you had done but after a brain hemorrhage, broken neck and multiple back procedures take your time so the recovery goes well and you come back as healed as possible.

@kerrylewis2581 7 месяцев назад

I've loved this series from start to finish. Looking forward to watching you get the International back up and running.

@TheeBeardedNoob 7 месяцев назад

Get better and so glad to see some truthful advise about the three main 'Murican Motors you ran. Also grats on the 400k man!!! So glad to see your channel growing.

@adamsdrives 7 месяцев назад

I saw the pop up and I clicked it! Sorry work. Questionable choices were made 😂

@MikeAnderson-uj3oo 7 месяцев назад

Such a rebel.

@smavtmb2196 7 месяцев назад

I knew his favorite was the LS before even watching, because it was first in the thumbnail image then the Hemi and coyote was last in order. Sure enough that was the exact order the engines finished in his comparison. Personally I would only put a Ford in a Ford a Chevy in a Chevy a Dodge in a Dodge. However if I was putting a V8 in an import that choice would be harder.

@morganweast4228 7 месяцев назад

Cool can hardly wait for your build of the 300 in line. Probably the best engine that Ford ever produced.

@russelljacob7955 7 месяцев назад

Hey Jared! Hows it going? Hyped for this vid. Thanks for being an inspiration for all of us who get stuck in a rut. Not just informational, but motivational!

@commish85 7 месяцев назад

wishing you a full & quick recovery Jared.

@1993mustangNotch 5 месяцев назад

I agree with your opinion on these engines and the platform you are swapping into. I am doing a coyote swap into a fox body, sheesh, it has been tough. I have not done swaps with the ls or hemi, but the sheer size of em is obvious. The electronic portion has been the longest part yet and can get pricey depending on what route you take like plug n play, from original harness or somewhere in-between. Great video and I appreciate the opinion especially in the maintenance category. Keep up the great work.

@iansharpe8420 7 месяцев назад

I really hope this build continues to progress as time goes on. Maybe a designated set of rims/tirea and a full interior. Excited for whata to come

@TheKiltedYaksman1 7 месяцев назад

Another one of my favorite RU-vidrs has put an LS4 into a Triumph GT6 swap that is being backed up by a T-5. It was chosen because it was quite a bit less expensive than other all-aluminum choices. So, it's possible, it just takes some work.

@mclarenjohnf1 7 месяцев назад

In a Triumph GT6 that's unreal, a friend had one and let me loose in it a few times until it had a fault and his bosses stopped paying his fuel bill at 6 miles to the gallon he took it off the road then sold it for a more modern car as work wouldn't give him a van as he blew 3 in 2 months but was the best they could find.

@Beer_Dad1975 7 месяцев назад

Still my pick for one of the prettiest cars ever built.

@ItsDaJax 7 месяцев назад

A Tremec T-5? Whew... good luck.

@TheKiltedYaksman1 7 месяцев назад

@@ItsDaJax, it's a budget build. He's doing it in a one car garage, and an angle grinder and welder are about the most sophisticated tools he has. I think maybe the plan is to run the T-5 for a while and save up for a TKX. There is just not much room...

@ItsDaJax 7 месяцев назад

@@TheKiltedYaksman1 I only say that because a stock or near stock 302 can kill one, and that's with under 200hp. Somebody in another video comment section said the stock 262 in a Blazer can kill one- which is funny to me. It's mainly the third gear synchro that goes out. Even funnier is that they're still considered weak, why doesn't Tremec do whatever they did to the t56 to make it stronger? The t56 is just a t5 with an extra od and it doesn't have that issue.

@The_R-n-I_Guy 6 месяцев назад

Between the LS, HEMI, and Coyote. It depends on how big your wallet is. People like me have to go LS. Or should I say the Vortec truck version. People with money can do whatever

@paulfretz6777 8 дней назад

You want to go fast? How much money ya got? Going fast cost money, the old hotrod guys had the right idea back in the day, which is why I respect them so much.

@CJColvin 6 месяцев назад

Had both Studebaker and Packard merged together with Hudson and Nash along with Kaiser and Jeep to form AMC in 1954 then man AMC would've had its own modern V8 to compete with the LS, Hemi, and Coyote as well.

@TheMrDarius 6 месяцев назад

I love Chevys and I prefer gm products but I can’t deny that the coyote and hemi are both great engines and offer a similar bang for your buck. They have their powers at different rpms and what not but they’re all very very capable engines.

@starkyslp16 7 месяцев назад

Hope your recovery goes quick. Remember to prioritize your health over us needy viewers!

@jimdieseldawg3435 7 месяцев назад

Hey Jared. Look after you, mate; we’re not just here for the cars, we kinda like you too 😉😁 I wish you a speedy recovery. All best wishes

@TheRayford13 7 месяцев назад

Lot of great info for this newbie. Thanks for taking the time to make this video!

@TheQuestionableGarage 7 месяцев назад

Glad it was helpful!

@stephenellis3609 4 месяца назад

I remember reading in the 90’s that there were enough Chevy small block v8’s produced over the years that if you lined them all up end to end, they would stretch across the United States coast to coast 3 times.

@billfioretti3013 7 месяцев назад

I've always been a Ford Man. The Coyote is just too damn big, complicated and expensive. Ford's Godzilla is a more conventional platform and once more support becomes available for it will be a more practical swap candidate. Plenty of potential with it.

@william.s.goodwin 7 месяцев назад

Just for clarification, the 4.6 Mod was introduced in 1996 model year in the SN95. 93 was the last year of the Fox. 94-95 still had a SBF 5.0 with a modified intake. The 4.6 PI was intro'd in the 99 model year.

@RyuFlynn 7 месяцев назад

The 4.6 Mod was first introduced in 1991 in the Lincoln Town car. Also My 1995 Cougar is a 4.6 car.

@Rob-tl9md 7 месяцев назад

that's a terrible clarification.

@ItsDaJax 7 месяцев назад

@@RyuFlynn1992.

@TheRealCCSmith 7 месяцев назад

My 94 T bird was a 4.6L ... that was the first one I ever saw.

@william.s.goodwin 7 месяцев назад

@@Rob-tl9md I freely admit that my thinking is Mustang-centric and excludes the Lincoln line up al together

@guthrie_1 5 месяцев назад

You also need to think about your power goals. Are you looking to make 500 wheel NA? or 1000 wheel with boost? Depending on which motor you choose it could be the difference between forged internals and a cam, or not touching any of those things.

@racerx2084 7 месяцев назад

Good stuff. With the Hemi now being the final, hopefully you can get it perfectly to your liking.

@keving1318 7 месяцев назад

00:54 Best of luck in your recovery, Jared. You rock, but can only keep rocking if you heal up properly.

@taurota1554 7 месяцев назад

Awesome content as always.Thanks for sharing and taking us along.

@russellhammond4373 7 месяцев назад

Thanks for the research you have done. Love the result.

@OneLastCrusader 3 месяца назад

LS = A great option for just about any project vehicle. Hemi = One mistake costs you $3K. Coyote = You can't afford one, and it won't fit.

@crycheck3585 6 месяцев назад

Cool video, the coyote is certainly neat, but for engine swaps, it's tough to beat a compact pushrod V8. I would've skipped the coyote and gone with a gas 7.3 or a 5.0/5.8 Windsor with aftermarket heads/crank/etc. It would be neat to see how pushrod fords would've done against those other pushrod V8s.

@midnight347 6 месяцев назад

The coyote fits fine in fox bodies and all the sn95 and s197 mustangs it will fit fine in alot of things. This shouldn't be an issue unless you're trying to fit it somewhere where it won't fit which is prob not that many vehicles. Prob not best for a miata.

@Scruffy72 7 месяцев назад

Awesome video Jared. My brother managed to do a Coyote swap into his Foxbody Drift car. Nice thing about that engine over a built 302. Is stock power is great enough to get the car sideways. Without placing greater risk on the health of the engine, as the engine is still running on stock power.

@erikturner5073 6 месяцев назад

Still, compared to the Windsor, and LS engines, there's plenty of reasons why coyotes are the least common swap engines like it or not. As far as modern engines go, the LS is number #1. Even though I'm a Ford guy(own a '89 Notchback )ever since the foxes were new. Ford hasn't built a decent affordable power plant since they let go of the Windsor. The Mod motors were a let down. Many mustang guys went LS after Ford went 4.6L. I'll keep building my Windsors.

@Scruffy72 6 месяцев назад

@@erikturner5073 personally I like the Windsors too. My 89 hatch currently has a 302 with exploror heads and intake. My first time building a engine and it hasn't blown up yet. Though it's just a stock rebuild with a few goodies inside.

@michaelmahoney8887 7 месяцев назад

Oh crap! So glad to hear you're recovery is going well Jared. 👍🏻

@erne75 5 месяцев назад

First year of mod motor in a Mustang was 1996. The first two years of the SN95 chassis, 94 and 95, used the old pushrod 5.0 from the fox body. In 1996 Ford switched to the 4.6 mod engine.

@omwtfym12 7 месяцев назад

Dont forget in that hemi the terrible oiling problems they had/have broken manifold bolts and dont forget the wiped out cams.

@omwtfym12 7 месяцев назад

Of course fixable and preventable but still. Also delete dod in the ls

@TheQuestionableGarage 7 месяцев назад

That is a good point, the hemi tick, and the dod issues of the ls.

@omwtfym12 7 месяцев назад

Also I believe a popular mod on the 5.0 is locking out cam phasers.

@alexgrindnshine2522 7 месяцев назад

What’s was the terrible oiling issues of the hemi? Exhaust manifold bolts broken in the hemi is a annoy problem but far easier to repair when compared to the LS that also breaks exhaust manifold bolts. Cam/lifter issues are also present in the AFM LS also.

@omwtfym12 7 месяцев назад

Newer early hemis basically relay on the splashing of oil to oil the cam shaft. They eat cams and lifters because the oil passages basically run along the cam completely missing it.

@2000blackstang 7 месяцев назад

With the exhaust you put on it i think the hemi did sound best but the 5.0 was second. But the sound can always change with different brands and styles.

@TheQuestionableGarage 7 месяцев назад

The coyote did sound great at 7300rpm

@2000blackstang 7 месяцев назад

@TheQuestionableGarage I'm a mustang and mostly 4.6 guy for sound. And don't care much for the new 5.0 just because everyone puts straight x pipes and they just rasp way too much. But it's hard to make a hemi sound bad no matter what.

@rennkafer13 7 месяцев назад

That was my ranking too. The Hemi had a beefier sound overall, but the Coyote when wound up was great too.

@jessecline4226 5 месяцев назад

Great & informative, first time finding your channel. I would like a Coyote, but the expense was a factor. Therefore, for my 53 F100, I chose a 5.0. Yes, a meager 302 & drivetrain from a late 90s early 2000s Explorer. Front suspension is from an 03 P71 Crown Vic (cop car). Easy to install, a ton of room, and cheap ($75 engine, rear 8.8, $200 4R70W, $275 for 55 F100 frame with CV swap already done. $550 all in.)

@benvin10365 3 месяца назад

Great informative video! FYI - The LS4 is the most common LS swap for the DeLorean community. We put a GTO front sump oil pan on it and use adapters to connect the LS4 to either Renault UN1 or Porsche G96 or G50 transaxle. Most of us run them naturally aspirated. Most upgrade the cam shaft, a few bore them from 5.3 to 5.7, one owner has his 5.3 with a supercharger connected to a G96 making over 520 horsepower to the wheels. There is a 383 stroker kit available for the LS4, but I don't think anyone in the DeLorean community has done that yet. I'm still building my DeLorean and had my engine rebuilt locally keeping it 5.3 liters with a cam from Texas Speed. I anticipate 430 horsepower at the crank and I'm using the Renault UN1 transaxle. Which should work very well, as long as I don't drive like an idiot.

@digitalrailroader 7 месяцев назад

As Mr. Regular of Regular Car Reviews always says: “On a Long Enough Timeline; Everything gets an LS” but if you want to make BIG power using forced induction, then get an iron block Vortec truck engine because the block can handle all of the boost!

@architjones3280 7 месяцев назад

Dude I'm a Chevy man, but you're right. That hemi sounds amazing

@deviantarsenal 4 месяца назад

Absolutely! I've always been a Chevy guy but I definitely thought the Hemi sounded the best.

@architjones3280 4 месяца назад

@@deviantarsenal never been that technical with anything, I just know there's something to the firing order, or scavenging but I wonder if a guy could Frankenstein the two together and make something unique. Just throwing it out there. 😆

@kimochsenbein8127 6 месяцев назад

Had a 1998 Z28 with LS1 turbo charged with 10 lbs of boost. with 42 lb injectors and put 460 WHP and 544 Ft lbs torgue.

@DustinMarkwald 7 месяцев назад

I love that you left out the K24. Although it might of worked in the Duster. Light and snappy. But I do like dodge in a dodge car.

@DeadInsideButStillSmiling 6 месяцев назад

LS's are great engines, they've just been done to death in my opinion. You go to a custom car show anymore and the owner's really don't even have to have their hoods open. You can bet your last dollar whatever the year, make, and model, it's likely going to have an LS in it. At this point I'd swap just about anything else just be different.

@marc-oliviercabot3380 6 месяцев назад

I'm with you on that. I was happy to see Rob Dahm's Rotary swapped Corvette and Skye at Reignited youtube channel that swapped a Hemi in a 80's Chevy Pickup exactly for that reason.

@there_is_nothing_here 7 месяцев назад

Best overall is the LS. it's not. even a question. It's not even a discussion. Are the other two good? Heck yes, they're awesome. But in terms of sheer aftermarket support. I mean, come on 🤷‍♂

@zacharykelley359 7 месяцев назад

Ls4 came in the impala ss, Grand Prix gxp, and the Buick lacrosse, and mates to the 4t65e-HD, also can be used with 4T80e from a Cadillac (ls4 king did this)with some modifications and also the f40 manual transmission from the Pontiac g6 gxp . (Fiero guys did this) Those are the 3 I know of.

@hpkntnw 7 месяцев назад

16:02 what does it cost in the end? Now take all three and throw 10 lbs of boost through each. Which one wakes way up and makes tons of power? Without porting, cam changes etc. the coyote every time.

@alexgrindnshine2522 7 месяцев назад

Awesome!! This felt really fair. I am a mopar guy. But there is no doubt the LS is the smartest choices in most cases. The 5.0 is great just more complex in always. Not to mention that GM does a lot more to support the race enthusiasts.

@Agilepickleunite 6 месяцев назад

GM hasn’t done nothing in years for car enthusiasts using the LS

@ryangulley2051 6 месяцев назад

@@Agilepickleunitebecsuse they already hsve evrrything

@trevorsmith2006 6 месяцев назад

The Coyote can make big block power, but it comes at big block pricing and size.

@95Sn95 7 месяцев назад

I was actually pondering the idea of a gen 3 5.7 hemi in my 92 c1500 street truck.

@gordonwd2 7 месяцев назад

One of your best videos, everything explained beautifully. Of course it’s easier to like because I 100% agree with your findings.

@stevecournoyer7405 7 месяцев назад

Very good information Jared. I love how you explain everything in everyday terms. Keep up the great content.

@dr.trombone2747 7 месяцев назад

Personal favorite is the coyote. I daily a 5.0 F150 and it is honestly AMAZING performance wise for a full size truck. Will say, the other 2 are amazing motors and I don't think there's a bad choice for a swap

@CJColvin 6 месяцев назад

Sounds awesome brother, I have a 2011 Ford F150 with a 5.0L Coyote V8 in it with 158,000 miles and still going strong and its a beast and it sounds like a beast with the Borla ATAK exhaust on it as well.

@Zach-ju5vi 6 месяцев назад

Great power, sounds amazing, and the best feature.... Good on fuel.

@CJColvin 6 месяцев назад

@@Zach-ju5vi Amen, gotta love the 5.0L Coyote V8 mate.

@GrandPitoVic 7 месяцев назад

First 4 6 mod motor was 91' Town car. I am doing a Ls3/6L80 swap in a 03'Crown Vic Police Interceptor. Way cheaper. For now.

@RepoDraghon 6 месяцев назад

SN95, SN95 New Edge, S197 (11-14 was like the new edge as it was a body redesign also Gen 1 and 1.5 Coyote), S550 (Gen 1.5, 2, and 3 Coyote), and now S650 (Gen 3 and 4)

@GeekGinger 7 месяцев назад

For old vehicles like this would the Ford Godzilla 7.3 be an easier fit since it's also pushrod? I know aftermarket support isn't going to be as strong but if you want to keep a Ford in a Ford it might be an option.

@TheQuestionableGarage 7 месяцев назад

Not just yet, they need to have the cost come down before they are a Everyman engine. Currently they are similar or slightly more expensive to swap than a coyote. I’m really excited to see them start to come down as more support happens!

@ChuckThree 7 месяцев назад

Godzilla is longer, taller, and +100lbs heavier than the Coyote. Mast Motorsports has a good comparison drawing. But yes, people are making +1,000hp easily with a Godzilla using rods, pistons, and cam.

@joshuasalvage4717 7 месяцев назад

If you're just an average person and average income, most people only have 1 option... Budget friendly, I dig the new godzilla, but when you can buy a car and ls swap it for the price of just a Ford motor, isn't applicable for everyone.

@ItsDaJax 7 месяцев назад

@@joshuasalvage4717That's what some people don't get about the LS; it's no longer boutique, simply a means to an end. It's Levi jeans when you need a pair of pants quickly and cheap.

@PyroBlonde7777 5 месяцев назад

Today every company builds a great V8 option for racing. It comes down to what you can afford or fit in the your vehicle of choice. That being said, I'll take the gen 3 Hemi every single time. You can't beat their head flow and an iron block is suitable for boost. I'll pay the premium every chance I get lol.

@169abr 5 месяцев назад

Iron blocks are dated, Brett in Snot Rocket uses a Ford OEM block making 2600whp

@PyroBlonde7777 5 месяцев назад

@@169abr Yeah, after skirting them. Iron isn't outdated. It's still stonger. That being said, aluminum is lighter and has its applications. The 5th gen Viper handles 3500hp on factory aluminum block. You can also buy billet stuff that's pretty strong.

@169abr 5 месяцев назад

@@PyroBlonde7777 I’ve never heard Brett say if the block is skirted, multiple times it’s been said it’s a 5.2 Predator block straight from Ford with thicker walls to make it a 5.0 and ofc all the wild internals and stuff. I believe Lund’s is the same iirc and stock 5.0 blocks have been well over 1000whp multiple times. I’m waaayyyyyy too broke to afford all that billet stuff but I appreciate the artistry and skill of it.

@lostmancampground 6 месяцев назад

What engine do you want is exactly why I did a Hemi into my ‘77 Wagoneer. Everyone does LS into these old Jeeps, it’s cheaper, but I love the Hemi and that’s what I wanted

@Blackinterceptor999 7 месяцев назад

Modular v8 was introduced in the Town Car in 1991 that particular engine however is what we call the bastard Block due to the old bell housing bolt pattern…it fits aods and T5’s

@pootmahgoots8482 7 месяцев назад

My go-to swap has been the Ford 7.3 Godzilla. From the factory it comes with forged internals and can handle a ton of boost. From what I've been seeing is a cam, headers, intake manifold, throttle body and a tune and you're making stupid amounts of power on a stock block and heads. :)

@frankenstein01 6 месяцев назад

the cost to swap them is just way too insane. just starting with the fact you need an aftermarket intake to fit under any normal hood.

@Caprice1977 6 месяцев назад

I have done swaps with all these motors whatever the customer bring is what I’m working with. But I got to say the LS engine is one of my favorites due to all the accessories that are available for this engines different water pumps , head swapping ,different alternators different brackets exhaust manifolds are endless. And very easy to make motor mounts but the majority of the time these engine mounts are available already.

@elbebe9509 12 дней назад

Which would you say is the most reliable on the daily for the longest prolly the ls right?

@brianpulley8652 6 месяцев назад

Never been a coyote guy even though I'm a Ford guy basically because it's just too big and way too many moving parts which cost more to build and I was so glad to see the 6.8 and 7.3 Godzilla.

@mikekozi-lester3887 7 месяцев назад

Hi Jared nice video 📹 and workmanship love all those engines !!!!

@Blackinterceptor999 7 месяцев назад

Coyote is a decent choice for a Ford…Especially in states that outlaw other makes being swapped into the car like Oregon for example…

@redslate 6 месяцев назад

Is that really a thing?

@robwh3954 6 месяцев назад

The Lincoln Town Car was the 1st model to use the 4.6L modular, but it was introduced 1992, not 84(it sounded like you said 84). The following year saw the 4V version in the Lincoln Mark VIII. The Mustang got both options starting in 1996. Speed in healing. I liked the video.

@dictator97 7 месяцев назад

As an European the LS sounds best :D Also with the famous Coyote tick, for me it would be a major NO. So it's pretty much between the LS and Hemi, more towards the LS

@GrandPitoVic 7 месяцев назад

The Ls is coming up on 30 years(26). The Eagle hemi has 14 years. The 5 oh has 12 years. That's why the Ls and Vortec has so much more support.

@midnight347 6 месяцев назад

I honestly don't think they have any more support the mustang has a huge aftermarket.

@roderickvinson3425 6 месяцев назад

Really can you just bolt any transmission to your 5.0 nope... 1966 power glide bolt right up no modification required. 60 years between them still work together flawlessly.. cost you thousands for a guide or th400 in a coyote

@aaronp9928 5 месяцев назад

I think the LS is the best swap, because of reliability, parts are eazy to find and they are not very difficult to work on. I just makes sense

@khumokwezimashapa2245 5 месяцев назад

I'm not a mechanic and have zero experience when it comes to deep car knowledge. The current engine in my car, the m271 Supercharged 1.6 liter i4 found in the W204 C180 Kompressor is relatively more simple compared to these. Could I maintain something like this on my own?

@edpenkalski8937 5 месяцев назад

@@khumokwezimashapa2245 easily but it's also gonna come down to where you are if you're in Europe an LS isn't gonna be in your pocket books best interest ... Where's your kompressor motor will have more parts at a junkyard, first thing a budget build needs is parts that are abundant in Europe a Chevy motor isn't gonna be plentiful... Here in America we're not finding lots of parts for a supercharged 1.4 liter Mercedes. But as far as simplistically speaking the LS is a walk in the park naturally aspirated.. when you start adding boost you're gonna need tuning experience because timing and fueling need to be spot on you run too rich you'll end up with oil that turns to gas run to lean and kaboom ...

@khumokwezimashapa2245 5 месяцев назад

@@edpenkalski8937 Thanks. I live in South Africa and basically know no one with any LS knowledge. I'll have to check my local forums for that one.

@arjenwennekes 6 месяцев назад

Again ! What a nice Video ! Fun to watch. Thank you👍🏻

@guyjordan8201 7 месяцев назад

Great recap on these engines. Keep healing, you look like you’re getting your mojo back. Can’t wait for your next episode

@roblewis7186 7 месяцев назад

Seeing that car at Moparty with the Gen 3 hemi inspired me to finish my Roadrunner and Super Bee. Possibly going to swap that hemi into my roadrunner. Thanks for the info on the swap man!!!

@TheQuestionableGarage 7 месяцев назад

Very cool!

@robsdeviceunknown 7 месяцев назад

I found 2 MAJOR differences in engines/swaps. The first 2 that should always be looked at. 1) Availability of aftermarket parts. Or even OEM parts (think Magnum engines, bottom of barrel support). This include cam sizes, headers, heads etc. and 2) COST of parts. There is a reason people are not slapping 12 cylender viper or lambo engines in their cars. So even if you can find parts, they are often double and up the cost of comparable SBC or SBF parts. You can build a LS motor with twice the performance as a Coyote crate engine. Now. One would think the LS crate motor is cheapest oer HP. but in my research the Hemi 392 crate for 8K is best dollaer per HP deal to be found. (vs 11K for LS) But this is just new, crate motor options. If you are a engine builder then the massive choice in aftermarket parts makes the LS #1. All of this said, your video touches a bit on all this and the adoption of said engines is what steers aftermarket engineering and cost. Hence why LS is currently best. before that any SBC was kig, followed by ford. Just my 33 cents.

@rennkafer13 7 месяцев назад

psst... Vipers are 10 cylinders... not 12.

@4valvemark98 5 месяцев назад

I love the 4V 4.6 its super smooth and has nice power delivery I've had little issues with mine and its at 175k miles currently. If it goes I'd love to shove a coyote truck motor in my mark viii since it makes 105 more horsepower stock for stock.

@rexkean 7 месяцев назад

Such a plethora of knowledge! 😁 Thanks for the tips!

@jimglen1982 7 месяцев назад

Great content again Jared - hope you feel better soon! Now considering a 2L straight six swap into my 1.3L Triumph Herald... I might increase from 60Hp to a fearsome 95 !

@Beer_Dad1975 7 месяцев назад

Would be easier to buy a 2 litre Vitesse? Love the Herald though, used to have a Dolomite Sprint, and my sister had a Spitfire Mk3 so always loved Triumphs.

@canon1753 7 месяцев назад

2.2 dodge. 96! Screaming hps!

@rennkafer13 7 месяцев назад

@@Beer_Dad1975 the Vitesse 2 liter is pretty much a bolt-in into a Herald given Herald = Spitfire/Vitesse = GT6 in the main.

@Beer_Dad1975 7 месяцев назад

@@rennkafer13 Sure easy swap & you could even put a 2500 unit in easy enough as it's the same dimensions as the 2 litre - but if memory serves (and TBH I'm nearly 50 so my memory isn't great) - the Vitesse has a different transmission with more suitable gear ratios and final drive, and beefier suspension and brakes. Back in the day of course it was pretty easy to swap engines around - my Dad bought a 2 door Toledo 1300 once and swapped the 2 litre engine and transmission from a TR7 into it over a weekend - that car was a load of fun. We called it the Torpedo.

@wg5331 7 месяцев назад

Just finished the video. Good, unbiased information. I knew the LS would gain the most points because the sheer amount of support and availability. Kinda how Miata is always the answer with fun cars, LS is always the answer with engine swaps.

@TheQuestionableGarage 7 месяцев назад

Glad you enjoyed it!