WHAT TO TRIM ON YOUR NISSAN FRONTIER TO FIT BIGGER TIRES *2023 NISSAN FRONTIER PRO-4X

Подписаться 8 тыс.

Просмотров 8 тыс.

50% 1

After installing some 285/70/17 tires onto my 2023 Frontier Pro-4x and 0mm offset wheels from Black Rhino there was a bit of trimming that needed to be done to stop the bigger tires from hitting the fenders on the Frontier. Here is quick rundown of what I trimmed to make the larger tires fit on my 2023 Pro-4x. #nissan #frontier #nissanfrontier
LIST OF WHAT'S ON THE FRONTIER SO FAR:
Dobinsons IMS Lift:dobinsonusa.com/products/dobi...
Factor 55 Flatlink E: www.factor55.com/p-flatlink-e...
Baja Designs S8 LED Light Bar: www.bajadesigns.com/products/...
Warn VR Evo 10S Winch: www.warn.com/vr-evo-10-s-103253
CBI Offroad Covert Bumper: cbioffroadfab.com/product/nis...
Auxbeam AR-600 RGB Switch Panel: www.auxbeam.com/CAC1/AR600
AVS In Channel Vent Visors: rb.gy/3ixcd
Bison Tonneau Cover: rb.gy/fja7g
Iron Bison Side Steps/Running Boards: rb.gy/xbt2o
LED Foglight Amber Vinyl (Bought Off Etsy): rb.gy/41hec
Grille Vinyl Inlays (Bought Off Etsy): rb.gy/wpmnw
3D Tailgate Decals (Bought Off Etsy): tinyurl.com/y982ksn7
DISCOUNT CODES/LINKS TO THE BEST PRODUCTS:
15% Off Auxbeam: Use Code CAC1
www.auxbeam.com/CAC1/AR600
Avalon King Products Sold Here: avalonking.com/canadiancruisin
For 15% off LED Lights Use code: CanadianCruisin
www.auxito.com/OiVI-PsrP_BH

Авто/Мото

Опубликовано:

6 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@soonhohwang4569 5 месяцев назад

I have a 2022 pro 4x with 2.5' lift, 0 offset rims, 285 70 17 tires. I understand you 100%. Cutting is little annoying but totally worth it. My frontier look x 1000 better.

@timfitzpatrick1924 7 месяцев назад

NIce video as always CC, thanks for all the work on these. Waiting to do my Fox 2.5" lift after the holidays and see how my 275/70R17's fit.

@CanadianCruisin 7 месяцев назад

Thank you. Let me know how it goes

@tai1704 2 месяца назад

I have NISMO's 1.5 inch lift and didnt need to trim/melt anything. Running 285 70/17 Falken Wildpeaks, used stock wheels though.

@CanadianCruisin 2 месяца назад

Yeah its the offset that screws it up more so than the lift

@jpfm33 5 месяцев назад

What kind of cutting wheel did you use?

@xisotopex 3 месяца назад

what is the minimum offset to have to be able to fit the next size tires?

@imparable2006 7 месяцев назад

Nice, did you re align the headlamps after the lift. And how about the speedometer, did you re calibrated ?

@CanadianCruisin 7 месяцев назад

I havent celebrated or adjusted anything. So far no one has flashed me lol

@IronJoe 7 месяцев назад

You didn’t have to cut in you fender like that. Pinch weld mod provides a much nicer finish and as much clearance. I guess it’s too late now lol. Good job anyway. Love you truck and I have the same Dobinsons under my 23 Pro4X

@CanadianCruisin 7 месяцев назад

When we had it flexed it was still rubbing pretty good in one spot so decided just to chop it off lol

@IronJoe 7 месяцев назад

@@CanadianCruisin Mine was pretty bad as well but I refused to cut it open. Now, if you off-road for real, you will rub a tiny bit in the front at full compression with the wheels turn a certain angle. We just can’t win lol

@CanadianCruisin 7 месяцев назад

@@IronJoe 😂 I need to get some days off work so I can test it out

@Veldrid Месяц назад

Would the 285/70/17 Mickey's / +0 offset wheels fit without a lift (but trimmed? This is the setup I want but haven't decided on the lift yet so was going to just do wheels/tires for now.

@abnerlopez1 Месяц назад

I am about to slap on some 0 offset 8.5 wheels on 285/70/17 maxxis at tires. I only have a 1.5 in level in front. I basically did what he did in the video, but instead of cutting metal, I pushed it up and back with a hammer. I’ll know in 2 days how it fits, but I know someone that did it, it will work, but even with trimming and heating, there will be minimal rubbing

@zechthomas1305 4 месяца назад

Do you think your 0 offset wheels would still have caused rubbing if you ran 265/70/17's on it?

@CanadianCruisin 4 месяца назад

I think it would still be pretty close. Not 100% though

@dominionn09 6 месяцев назад

Does Nissan have a 4" lift?

@CanadianCruisin 6 месяцев назад

Not that I know about.

@newangst1 Месяц назад

They have a 6”

@williamholiday2881 7 месяцев назад

What offset doesn't rub?

@CanadianCruisin 7 месяцев назад

I havent looked into it enough to know for sure. The closer to stock you get the better off you will be.

@prodogey69 7 месяцев назад

Stock offset and rim with this size tire did not rub for me when I put on k02's in this size It only started rubbing when I added 1.5 inch spacers

@tshatara22 7 месяцев назад

@@prodogey69 so if i get 285/70/17 ko2s on my stock beadlock 17s, i wont rub?

@prodogey69 7 месяцев назад

@@tshatara22 yes, they shouldn't. I have stock 17's that came on my midnight edition. But the stock wheels you're talking about are just bead locks that look like real ones. Not true beadlocks

@timfitzpatrick1924 7 месяцев назад

@@tshatara22 I would think you'll still get rub. I have 275/70/R17 Toyo AT3 on the Nismo Axis rims, so same +30 offset and get just the slightest rub on the mud flaps right near lock. Usually when going over something at the same time as turning. If you have a 285/70R17 I would bet you'll still get a bit of rub. Thinking it might go away mostly with removing the mudflaps. in front. I am doing the ADO Fox extended 2.5" lift in a couple weeks and will see if I get rub still. I think if so removing the mudflats would be enough, but we'll see.