Why the ESCO Jack Stand is the Best for Car Enthusiasts (ESCO vs Sunex vs Duralast Review)

Подписаться 31 тыс.

Просмотров 59 тыс.

50% 1

It's essential to have a set of jack stands to work on your car safely. I'll show you why the ESCO is the best jack stand on the market. Buy here: ecarguides.com/product/esco-1...
I'll also review a traditional style ratcheting jack stand and an aluminum race style jack stand. Purchase a set of ESCO jack stands at the best price below:
ESCO 10499 Jack Stands (Low Profile Version): ecarguides.com/product/esco-1...
Check out my other videos:
- How to Jack Up a Porsche 911: • How To Properly Jack U...
- Porsche 911 Buyer's Guide Series: • ✪ Which 911 should you...
- Porsche 911 Ownership Videos - • Porsche 911 Ownership
- Car Discussions & Advice Videos: • Car Discussions & Advice
- Product Reviews & Tutorials: • Product Reviews
- Porsche Cayenne Turbo Ownership Videos: • Porsche Cayenne Turbo ...
- Car Detailing & Paint Care Videos: • Car Detailing & Paint ...
Subscribe to CarFanatic for weekly Porsche & sports car videos!
/ @carfanatic
Camera Equipment Used:
- GoPro Hero Black: amzn.to/3b5KI99
- Rode VideoMicro Mic: amzn.to/2hJWMkY

Авто/Мото

Опубликовано:

19 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@CarFanatic Год назад

ESCO jack stands available here (FREE SHIPPING): ecarguides.com/product/esco-10498-performance-jack-stand-3-ton-capacity-pair/

@MRMAN-wb1tv 2 года назад

*Lol. Bro stop it! All you had to do was rotate that duralast*

@armchairtin-kicker503 Год назад

To support pinch-weld jack points, I pair each of my ESCOs with a DEDC Universal Aluminum Grooved Magnetic Jack Pad.

@gunner45357308 2 года назад

Great info, thank you

@desertdan100 2 года назад

That first jack stand mentioned has a small tab on the side that you are supposed to bend inward toward the shank when you assemble it. Same thing with the Harbor Freight style that was recalled. It is part of the engineering and design for safety. It helps to promote good alignment of the locking mechanism and teeth on the shank.

@whocares4464 2 года назад

Yes always and I mean always bend those tabs in. I've purchased several used jack stands and not a single one had the tabs bent in

@whocares4464 2 года назад

Bending tabs also makes it to where the stand stays together so you won't loose one of the pieces

@zenddoor 2 года назад

Ah, good mention. I wondered why they all have that tab.

@96SupraTT 2 года назад

Bending the tab in does nothing for alignment of the shaft within the stand. If it does then your stands have dangerous tolerances. Its purpose is to keep the heavy shaft from falling out when moving the stand. You could easily break bones in your foot, have the shaft slam into your fender, or smash your gf's kitty IF you don't remember to carry them vertical. That said, I don't indent my tabs to ease with transport. That said, I've had had a shaft fall out when I was being careless.

@BottleJackBuddy 3 года назад

Thanks for sharing.

@LoveLikeaHurricane 2 года назад

I use the esco shorties as shown in the video. I still put either a folded microfiber towel or a pinch weld rubber puck from amazin to save the rubber padding of the esco.

@jonathanl2748 3 года назад

I love my Esco jack stand as I feel like my life is safest with them. You get what you pay for. One might have to buy jack pads that are made for your specific vehicle.

@CarFanatic 3 года назад

Agreed. Thanks and hope you're subscribed!

@jonathanl2748 3 года назад

@@CarFanatic indeed, I am subscribed. Thanks for the educational videos.

@dovuga1753 Год назад

standard jack stands (duralast type) is design for almost all vehicles, even if you hit the release lever with a hammer the jack will not fall, there is 2 much weight for it to slip, just make sure jack stand is straight and not defected, with proper weight capacity

@hksjoshua 3 года назад

I like my sunex jackstands out of rest of mine.

@RingZero 2 года назад

Good video, I would not trust creeping under a car that is sitting on any jack stands made out of aluminum, regardless of how expensive or beautiful they look. Been using 6-ton steel jack stands from Craftsman for last 25 yrs, they have held my 3/4 ton Suburban, Tahoe, Touareg and MB E350's over the years. For me using Aluminum Jack stands is like using Aluminum pry bars, though the functions are different but you get the point.

@leftysr2stupid354 Год назад

I think husky would be the best

@JS-vh4yq 2 года назад

Excellent info. Question: How would it be determined which model Esco stand to have, low-profile or standard height? Cheers.

@whocares4464 2 года назад

Working on mainly short vehicles short jack stands, planning on working on taller vehicle's get the tall ones

@whymedude88 3 года назад

First off let me just say thank you for the videos. I really appreciate content creators that are trying to review and compare products. With this being said though, my suggestion to you and anyone else is to never ever recommend a jackstand without a locking mechanism as there are many instances of the jacks slipping. So in other words, ask yourself a simple question is it really worth your life to save $10? I'm thinking probably not. Just my advice, I wouldn't even consider reviewing a piece of junk that doesn't have a safety pin. Hope this helps have a great day

@Nbomber 2 года назад

They really arent that unsafe, just make sure to use them properly and check the handle is in the correct position. And its just good practice to use extra support anyway like a wheel or blocks of wood.

@jimf5160 3 года назад

The duralast style is good for my 69 911 and fits well on the rear torsion bar extensions..., also fits well on the front torsion bar mounts. I like the Esco's better for my 2011C2S

@gwot 3 года назад

you're talking about the shape of the saddle? Esco sells a post with a curved saddle that's better for supporting something bar shaped

@jimf5160 3 года назад

@@gwot I will check that out.

@buggyfeverbuck7575 3 года назад

You could have rotated those strands 90 degrees. The first issue I see is you have a Porsche. Putting a lot of faith on the weld of that disc with the rubber pad. Ditch the rubber. Not safe.

@a.c.e.7568 2 года назад

I would never use a jack stand where there is a metal to metal contact between the stand and the vehicle, because those can slip. I always use hockey pucks with my Porsche jack pads. And those Sunex jack stands work just fine because once weight is placed on it, the hockey puck presses into the saddle nicely. It appears you have the "shorty" ESCO jack stands. Reviews of the ESCO on Amazon, some people have mentioned them as "junk" with some of the holes being too small for the pin to fit (Qualith Control issue) and they can wobble a lot at full extension (maybe). I'd still but them though.

@ADefenestrator 3 дня назад

I'd steer clear of any jack designed like that Sunex. The round bottom means if it gets tilted even a little to one side it's going to roll out and drop the car on you. Not safe. I think Torin used to sell that style, but switched to a truncated triangle because of the stability problems.

@mistuhjawknee5505 2 года назад

key takeaway: get a few hockey pucks

@TranceFur 3 года назад

Great review and demonstration. Decided to bit the bullet and spend a bit more for the Esco stands. They’ll work better for my ‘99 M3, with its permanent hockey puck lift points. I think the rubber pad can even be removed from the Esco stands if desired. Is that correct?

@CarFanatic 3 года назад

Yup! Thanks for watching and your support!

@7gooo 2 года назад

well may be ratchet jack stand dose not fit with your 911 but it pretty fits Majority of our cars

@sandmanbub 3 года назад

@Whoop!!

@jeffro221 Год назад

The Esco goofed by not using a U-shaped double pin arrangement. Double pin is way stronger than single pin.

@Dupont550 2 года назад

Rennstand?

@kimchee411 3 года назад

Like my Esco but wish I had Jackpoint jack stands.

@CarFanatic 3 года назад

Really? The Jack Points cost around $650 a set. At that price, you might as well go with a Quick Jack.

@Laguna2013 3 года назад

@@CarFanatic would you feel 100% safe using a quick jack with no stands? It looks like that thing could fold up on you.

@gwot 3 года назад

@@Laguna2013 so many people have them, tons of youtubers use them, if one has folded, we would hear about it. QuickJack themselves also had overloading demos videos, it holds way more than it's rated for. But, if you still don't feel safe, nothing's stopping you for setting up stands to go with your quickjack. End of the day it's your life, do what's comfortable for you and overkill on safety.

@brickswisher7672 3 года назад

@@gwot the esco's held up to like 25tons...each.

@gwot 3 года назад

@@brickswisher7672 ok and?

@darrenporsch 2 года назад

Buddy do some research those are the same aluminum stands that Torin sells for 50 bucks on Amazon. harbor freight sells a version they for approx $75. nobody pays $120 for those sunex version ones. Everybody's aluminum stand of that style is made by the same company that just painted them a different colors. For the different companies they manufacture for to sell them under there brand. Harbor freight also sells an aluminum ratchet style jack stand for 55

@flexibleaspect Год назад

The Big Red Torin aluminum cylindrical stands are a little different than the Harbor Freight and Sunex versions. The Big Red has a hexagonal base and a screw that goes up thru the center of the base into the bottom of the vertical tube keeping them together (some say this allows the tube to wobble side to side a bit). In comparison, the Harbor Freight and Sunex have a circular base and a screw that goes horizontally thru the base and vertical tube. I'm not sure which design is better, just noting the differences.

@darrenporsch Год назад

@@flexibleaspect thank for the info 👍

@Evil55tifler 3 года назад

Don't buy the blue duralst just spent an hour trying to pull it off from under my car after it jammed

@thejackaroo4WDcampingchannel Год назад

That is because the first one is an AXLE STAND and not a jack stand and it is designed to fit an axle. Why are you calling them Jack Stands????

@whatsupryan 5 месяцев назад

If someone can afford a Porsche they don’t need a duralast

@CarFanatic 5 месяцев назад

I wasn't always able to afford a Porsche :) and even though I have a couple, I'm still frugal.

@QuangPham-ge6xn Год назад

Junk

@njpoxman 2 года назад

Who wears flip flops when they are working on a car? Nobody that actually works on a car wears flip flops. What a joke.

@StuartTrejos 2 года назад

who cares. you can wear whatever you want

@RingZero 2 года назад

Appreciate your comment. Unfortunately, I originate from a country where mechanics work bare feet to make their living. It does not matter what you wear, as long as you keep your body parts safe. I personally prefer at least safety glasses, jeans and shoes, but sometimes one or all 3 can be annoying, especially in summer

@leftysr2stupid354 Год назад

@@RingZero yea but alot of times that's cause they don't have resources for shoes and sh!t. But that doesn't seem to be the case here..

@leftysr2stupid354 Год назад

I would always check the weld points first