Window Tinting: How to reverse roll a back window

Подписаться 31 тыс.

Просмотров 75 тыс.

50% 1

Wanna help support the channel?
Shop Installation Tools!
- dryshrinkprep.com/collections...
Shop Dry Shrink Prep!
- dryshrinkprep.com/collections...
Donate to the Channel!
- streamelements.com/windowtint...
--------------------------------------------------------------------------------------------------------------
Big shout out to our sponsors!
tintwiz.com/
There are many helpful apps and tools available, but most software out there are not designed to tackle the specific workflow and challenges that present themselves to tinters. Tint Wiz™ is a CRM app designed specifically for window tint companies. Book appointments, create proposals, send invoices, schedule jobs, manage tasks, and more.
dryshrinkprep.com/
We here at Dry Shrink Prep believe in long and healthy carriers in the tinting industry. Our Dry Shrink Prep is handcrafted with all natural ingredients that contain moisturizing properties, anti-aging properties, rich in antioxidants and much more. If you’re a health conscious person then this product just might be for you.
solarfxwindowfilms.com/
Solar FX Window Films offers one of the most extensive lines of Non-Reflective, Hybrid Metalized and Heat Rejecting Nano-Ceramic Automotive Window Films in the industry. Our window films are manufactured with the highest level of quality materials and are subjected to rigorous testing, both in the lab and in the field. Our goal is to ensure you get consistency and excellence in each and every box of tint you purchase. Our window films are not only an investment that provides the consumer increased privacy and comfort, they also help provide protection from the damaging effects of the sun and can help reduce driver fatigue and increase safety.

Авто/Мото

Опубликовано:

8 июл 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 143

@fonetiks1 7 лет назад

With the third brake light on the bottom, I roll both sides of the tint toward each other (like a scroll) leaving just enough room for the size of the break light. I slit the liner in the middle so it is in two halves. On Install I then slide the film over the break light and down to the bottom of the glass. I then unroll each side of the tint. Make some side to side adjustments. Squeegee and done. This method really helps from having the top half of the tint flop around and pick up contamination. for me it's a faster and cleaner install. I love your videos by the way!

@TheSeriesofTubes 6 лет назад

fonetiks1 I’m trying that right now thanks for the tip!

@Messorem6 5 лет назад

only thing that saved the install was the plastic rear deck.

@VIC909B1 3 года назад

I don't understand how the protective film was rolled up on the inside of the Roll on the outside of the window. Then when it's unrolled on the inside of the window the Protective film is now on the outside of the roll, what the hell is that supposed to mean? and the glued side is still facing the wrong way, not buying it.

@lohengrinknight 3 года назад

Hi. When you actually install the tint on the inside, why is the liner facing you and not the glass as it happens when you do the door windows? If the adhesive is supposed to be between the liner and the tint, then for what I see in the video, you squeegee the glue away. I'm so confused now.

@PeterAndapple2000 2 года назад

Good point Notice that too

@silentpreacher 2 года назад

I believe the film should be flipped. Removing the liner will expose the adhesive side.

@NothingMeek 5 лет назад

Simply brilliant!

@bluu911 7 лет назад

Nice def need to practice

@zaraqkhan6138 4 года назад

Does the back 3rd brake light stop working if you put too much water?

@dash4uson760 4 года назад

Very professional. !!

@brianjohnson6418 6 лет назад

Great videos

@kewlkwest3484 6 лет назад

Where did ya get this music from? It sounds great.

@foodlover372 4 года назад

Hey Patrick, I tried your technique for reverse roll, I saw few small fingers in the bottom of the Film, can you tell me what could cause that !

@garrettlea913 7 лет назад

make a video of a review on the fusion squeegee handle. i just ordered one hopefully its good

@WindowTintingBusiness 7 лет назад

The fusion squeegee handle is the best out there in my opinion. other handles either don't hold the squeegee well enough or hurt my hand near the handle almost to the point of cutting my hand. The fusion handle holds great and has a comfortable grip. Very good choice.

@blairakana9984 3 года назад

Maybe you don’t have to put the sticky side onto the glass and the tint will still stick. Because he’s obviously pulling the clear liner off of the tint that’s not facing the glass.

@WindowTintingBusiness 3 года назад

Incorrect

@123mcgarrigle 3 года назад

@@WindowTintingBusiness Then, you did it incorrectly, as you peeled off the liner which was facing you, exposing the adhesive outside. Yet you still applied the film, you got the film the wrong way around, just admit it 😂

@ryanjohnson7744 3 года назад

How is the liner facing you but the window is already on the right side?

@JBIRD575 7 лет назад

love that bulldozer too great tool

@danmartinez3390 4 года назад

How hot do I need the heat gun to shrink?

@researchandbuild1751 6 лет назад

This still didn't make sense to me. When you removed the film it looked like it came from inside the car, which wouldn't make sense since the film is supposed to be on the window side of the tint...still confused.

@WindowTintingBusiness 6 лет назад

the liner is on the outside when I'm rolling it and at the end when finished there will be the film and the liner so all you have to do is keep the liner on the roll and just grab the film when unrolling so the film is on the glass and the liner is behind.

@researchandbuild1751 6 лет назад

Window Tinting Business i thought about it some more and i think i understand now, thank you!

@peligroso1777 6 лет назад

That genius trick solves many issues I have fought with for years. Never stop seeking knowledge. There is so much out there. Thank you for sharing this stuff. I had a shop in Northern Virginia during the Early 90's, and have done it infrequently, as a side thing ever since. It's a perishable skill. I feel like i'm re-learning every time I tint. I'm slow, and make mistakes often. But, in the end, I do a pretty decent job, and that is rewarding. this makes me want to practice on something.....Carry on! New sub.

@jinnap1148 4 года назад

Yeah that’s the same question I was gonna ask ... How do you roll that filmo to turn inside out ? I want to learn how

@blairakana9984 3 года назад

He’s not making sense when he’s explaining why the clear liner was facing him on the inside of the car when he removed it and not facing the glass like it supposed to. He’s lying

@cristianleal5680 4 года назад

Is this after heat shrinking the back window film?

@mattathiasmillang9420 3 года назад

And maybe apply some needle nose pliers to it to scrape it if you ain't got it but yeah no what is that name of the tool where do you buy that also after you get done scraping the window with the tool and the inside you have to static and what do you do when they have the little metal static rings going through the window

@adriancota7393 6 лет назад

nice song thank you

@JBIRD575 7 лет назад

thanks in advance

@danielreyna7275 7 лет назад

I like your very informative videos. I consider you a fellow Master Tinter. If I may a little critique. On your reverse roll all is good but maybe a little disadvantage is your film kept coming down from the top. Also the lower righ side rolled inward. This increases the probability of contamination. We all have different techniques. I suggest on a glass wet outer liner, remove half of liner wetting it, repeat opposite side. Peel back bottom end about 8 inches grab film walk into vehicle. Slide bottom end to bottom of rear window. Remove remaining liner. Leaving most of liner decreases contamination. Finish crafting film onto glass, wallah . 👍😊

@WindowTintingBusiness 7 лет назад

thanks you for the constructive criticism! typically I have a better time installing but this vehicle had a 3rd break light at the bottom of the glass so I had to bring the film up just a bit to avoid creasing it when unrolling but you are absolutely right on the button. thanks again for watching

@sadokbarbouche9427 2 года назад

Was this just a test video because it looked like the liner was peeled away from the glass the adhesive was on the wrong side?

@WindowTintingBusiness 2 года назад

Nope it is correct. I think a follow up video better explaining the process may be needed.

@Frdzed 3 года назад

What happens to the wet speakers ?

@mattathiasmillang9420 3 года назад

What's the name of that tool that you're using to push like a cuticle pusher cuz you also use like a blade it's just sharpen out to use like a blade also I saw exactly what you did but you didn't use a razor but you use that pusher so that push your ass to be like a credit card type tool where do you buy them at

@lakersbaby6754 6 лет назад

When you reverse roll, does rolling it get the adhesive transfered to the other side or the actual film rolling onto the adhesive side. Sorry for the dumb question.

@WindowTintingBusiness 6 лет назад

Not a dumb question at all. when reverse rolling film the adhesive side of the film ends up on the glass.

@mikeprice8307 3 года назад

@@WindowTintingBusiness either way the sticky side has the liner. If the sticky side is against the window inside the car, how are you pulling away the liner from you instead of the sticky side near the glass?

@808kea808 6 лет назад

Great stuff you make it look so easy. How do you avoid having any fingers after you've applied it and squeegeed it ?

@WindowTintingBusiness 6 лет назад

+808kea808 proper shrinking prior the the installation is key, If it ain't glass it's ass! After that and you've transferred the film into position just remember how you shrink and basically squeegee the same way.

@808kea808 6 лет назад

Window Tinting Business is there a rule of thumb to follow while shrinking out the fingers ? I know divide it into quadrants. But Like work center out, only squeegee downwards or something. Oh I just got those cloth gloves. Imma use it on the dry shrink and see if it helps.

@808kea808 6 лет назад

Window Tinting Business I like that , if it ain't glass it's ass. I'll remember it. Just sucks when so much time spent on it and it doesn't come out right lol

@WindowTintingBusiness 6 лет назад

when shrinking I like working from the center out because there is so much real estate to work with plus it will pull the film inwards and it will result in less shrinking when you get to the outside and minimizing the risk for creases. Always shrink with the grain of course only up and down, one thing to keep in mind is where the grain is when you're working on curvy back windows because you want to go straight up and down but due to the curve and when you look at it it'll actually go down and inwards on the bottom half and up and outwards on the top. I love the glove because most heat guns are at 1200 degrees and the film gets very hot. Good luck my friend!

@808kea808 6 лет назад

Window Tinting Business thank you for responding I really appreciate it. How do you find the grain?

@putramandiriautofilm3644 4 года назад

Like your video... I from Indonesia

@Solutionsleon 5 лет назад

Ey man, I need the first tool,

@JunaWaAmin 6 лет назад

Thanks bro. Had to redo my windows after my homie's tint job bubbled up ..... found out that the fool tinted the opposite side of the windows and wasted a whole lotta film. Lol! Thanks again.

@WindowTintingBusiness 6 лет назад

glad I could help!

@soobok13 2 года назад

Quick question when you are installing the film on the inside why is the release liner facing you?

@konut7607 2 года назад

I was wondering the same thing lol

@Windowtintingqueen 6 лет назад

Nice video. I always unroll from my right to left. What kind of sprayer is that you're using?

@WindowTintingBusiness 6 лет назад

+Window Tinting Queen I'm right handed so it's easier for my dominant hand to lead. The sprayer I'm using is the Jr pump 2, love that sprayer over hand pump but I need to get my tank back! Ps Hope you like switching over to dry shrinking. It's hard to change routine but trust me once you get it (which doesn't take long) it's so much better!

@Windowtintingqueen 6 лет назад

Window Tinting Business wait I do unroll on my right like you the way the car is faced in your video made me confused lol thanks for the sprayer.

@Windowtintingqueen 6 лет назад

Window Tinting Business wait I do unroll on my right like you the way the car is faced in your video made me confused lol thanks for the sprayer.

@Yamaha-uz4ow 6 лет назад

The ss pressurized tank is the best way to go you can purchase it in 3 gallons or 5 gallons I have both the 3 gallon is more convenient especially when bringing it to residential or commercial jobs, I can't believe all these tinters still using spray bottles lol , I agree dry shrinking in my opinion is the best way to shrink try a bounce pad or fabric softener they both work great good luck.

@Windowtintingqueen 6 лет назад

Yamaha82 88 we have 4 tanks in our shop but I still use the spray bottle because I feel like I can control the pressure 🤷‍♀️

@kiabass8798 4 года назад

Im kinda scared to do that for my moms full windshield tint

@JBIRD575 7 лет назад

I like that slip action Johnson's baby shampoo???

@OJtheOZ 6 лет назад

I still don't get it, how did the liner transfer it's position?

@WindowTintingBusiness 6 лет назад

when you are rolling the film (either on a car or on a glass board) the liner at the time is facing out and the film is on the other side of that. By the end of the roll you will have the liner and the film together and the film will be on the outside of the roll and the liner will be on the inside. when its time to start unrolling the liner side will want to stay with the roll and just let the film unroll.

@Messorem6 5 лет назад

So when he rolls up the film off the back glass the liner is on the inside. When he installs the film, he rolls the clear liner over the film again exposing the tint adhesive and this transfers the clear line to the inside of the roll.

@loui828 5 лет назад

Messorem6 it’s fucking confusing, I wish someone would make a RU-vid explanation of how the glue side of the tint ends up on the side of the window cuz it doesn’t look like it does.

@customer52 5 лет назад

@@loui828 He turned the roll, so the glue side was now pointing to window. Then he separated head of the film from the liner and put it on the glass, and after one turn the liner started to follow the film outside this time. Magic. Try with two papers e.g.

@samisami5358 5 лет назад

I’m mind fucked it’s like a fucken magic trick. Did he remove the liner, flip the film and put the liner on top and then roll????

@billababersher6182 5 лет назад

hi Can any one please tell which spray he is using? can we use any detergent for that?

@WindowTintingBusiness 5 лет назад

The slip solution that I am using is about 90% water and 10% Johnsons baby shampoo

@soyyo9704 6 лет назад

Today was my first day training to shrink . It's hard! any advise?

@WindowTintingBusiness 6 лет назад

Take your time, lay a good “H” pattern down, learn where the sweet spot distance is for your heat gun, start using something soft like a mactac or a folded microfiber towel instead of a hard card at first the slowly move to harder cards, dry shrinking is easier than wet shrinking, shrink evenly across the glass. It’s hard at first but slowly you’ll get better. Before you know it you’ll be shrinking like a pro and it’s a very soothing process.

@odz_ 6 лет назад

heladio sanchez don’t be afraid

@dvsionteam6758 6 лет назад

Hi I have been trying to tint my back window but I can never get rid of those fingers sticking out I’ve bought and wasted so much film trying this. Can you give me some pointers on how to get rid of those fingers? Is it because I have to heat shrink all of them before applying it on the window?

@WindowTintingBusiness 6 лет назад

correct! you have to shrink the film on the outside before installation. if not it wont lay flat. good luck

@dvsionteam6758 6 лет назад

Window Tinting Business Awesome thanks for the tip!

@JACQUESEHARRISMUSIC 4 года назад

you gotta heat gun it from the back to make it flat

@raywander381 6 лет назад

como é o nome dessa espátula branca grande ?

@fabianolow9023 4 года назад

O nome e' Bulldozer

@JBIRD575 7 лет назад

do you make fresh batch of soap every day for clean installs???

@WindowTintingBusiness 7 лет назад

I fill my bottle and when its out I refill it. the only thing I do with my bottle is once a week I'll take it apart and give it a good cleaning w a scrub or else the soap starts to build up and it will eventually get through the filter and on the glass when you're spraying it.

@JBIRD575 7 лет назад

Window Tinting Business thanks man

@blairakana9984 3 года назад

I’m trying to watch him slowly taking and peeling off the clear liner and I can see that it’s coming off towards the inside of the car and shit in the clear line to be coming off towards the window with the stickiness towards the window. I was trying to watch very closely because he stating that the liner east towards the glass, but it doesn’t look like it in the video and it clearly shows the liner towards the inside of the car and not towards the glass.

@tgreen200 3 года назад

When you about to take it off the glass to roll it. I think he should have rolled the film going under the film instead of top first. So that when you go inside the release liner will be facing the glass when unrolling it.

@sgtdanny69148 Год назад

Great video but knowing me if i tried to do that, i'll get frustrated by the cramp work space and the constant sweating and then end up ruining the film.

@PJCyprus 6 лет назад

How do you squeegee without creasing? I seem to spend lots of time with my hands getting it flat before using any tools. What’s the trick?

@WindowTintingBusiness 6 лет назад

even slow strokes and make sure to keep the squeegee flat against the glass and film.

@PJCyprus 6 лет назад

Window Tinting Business cheers for the tips

@laobe5119 6 лет назад

More soap

@gav6808 3 года назад

Or use a hand held dust brush on the film,so many ppl use the brush technique ,years ago it was unheard of and ppl would laugh and say yeh right .But there are youtube videos on how to do it and make the job so much easier.

@pituq129 6 лет назад

Which software you use?

@WindowTintingBusiness 6 лет назад

Llumar Precision Cut

@ssssahek 6 лет назад

Hey man I just got my tints and on the back window theres a cluster of dust spots. The installer is telling me that this is normal and theres no way they can get it 100% perfect. Is that in any way true or acceptable or am I getting screwed? Am I being unrealistic in what I'm expecting?

@ssssahek 6 лет назад

Also in a few spots there some warping of light. I dont know how to explain it. Like splotchy? As if the tint was stretched or there was something gummy under the film.

@WindowTintingBusiness 6 лет назад

A 100% perfect job is not possible that part is correct. But depending on the skill level and experience of the installer it can be near perfect. I always tell people I guarantee 97%.

@Zx14rrrrrrrrrrr 5 лет назад

I don't understand isn't the sticky part of the tint on the other side? 🤔🤔🤔🤔

@edwardzx7 5 лет назад

In the video, when the tint was up on the window the clear film was facing down, And so is the adhesive side if you’ve tinted before. I’m with you on being confused. Maybe he took the clear film off before recording and turned it around. 🤷🏾‍♂️ I tinted many cars but I don’t know..... he made it believable!

@Zx14rrrrrrrrrrr 5 лет назад

Jay Fleming I've seen other people do it and apparently the sticky side is on the glass I still don't get how. They say try it with 2 sheets of paper to understand

@JACQUESEHARRISMUSIC 4 года назад

that's what I'm thinking to #TIDE

@elijahelijah2042 2 года назад

I was about to say the same thing..Thought I was crazy for a second

@crow-vz5lx 6 лет назад

This would frustrate me considerably.lol i can't even lay my blankets correctly

@WindowTintingBusiness 6 лет назад

haha!

@lfearless1819 6 лет назад

Are you lefty? If, not, i usually start right to left. I feel its a lot easier

@WindowTintingBusiness 6 лет назад

I'm right handed but I like to hold the film with my left and control the film that is unrolling with my right hand. I feel like I have more control with it that way.

@David-ls4qp 5 лет назад

It looks as if he was forced to do this

@cal_random8983 3 года назад

I don’t know much about applying tints to windows, but I’m pretty sure he didn’t reverse the tint; when he applied it on the inside of the vehicle, but overall great video👍👍.

@gav6808 3 года назад

Yeh he did just the liner rolls back onto the film.

@mikeprice8307 3 года назад

@@gav6808 no he did not

@sttm1283 7 лет назад

this is my nightmare. doing the backwindow. i seem to do everything right, cutting, heating out the fingers etc, roll it up etc. but when i go inside the car to install i manage to fuck it up EVERY time. not sure whaT im doing wrong. guess i need to practice more. its looks ridiciously easy when the pros like u do it.

@WindowTintingBusiness 7 лет назад

I rarely reverse roll back windows. If its a very small space that would make it hard for me to Frankenstein the film in like coupes and smaller cars. But you are correct time and practice makes perfect. Working on 4-5 cars a day 6 days a week after 6 months to a year will make you an awesome installer.

@Windowtintingqueen 6 лет назад

Keep on doing it you'll get it. Back windows are the easiest for me. Id rather tint them than doors. Windshields are a bit more challenging ever done those?

@raiderman28 6 лет назад

seems like a higher chance of putting kinks in the film. i have tried this technique and had issues. you seemed to be having them too. good video though

@WindowTintingBusiness 6 лет назад

W cars that have 3rd break lights you have to unroll a bit higher. I usually just Frankenstein the back windows in but I wanted to make a reverse roll video this day. It’s much easier w no 3rd break light.

@JBIRD575 7 лет назад

is that baby shampoo name brand or Wal-Mart brand??

@WindowTintingBusiness 7 лет назад

I'm a tint snob so I use J&J. I know people have done research and testing with the off brand stuff but I just like using it.

@JBIRD575 7 лет назад

Window Tinting Business nice johnson and Johnson all day!

@drakesis 5 лет назад

@@WindowTintingBusiness what is the ratio of shamp to water?

@StrainingDingelberry 5 лет назад

I’ve been Tinting for 10 years and never seen it done this way. What’s the advantage of rolling it. Just seems like a giant wast of time to me.

@WindowTintingBusiness 5 лет назад

I have to take some blame here because this wasnt the best car to use as an example but people were asking for a reverse roll video. usually 2 door cars or if the back seat is really tiny and with no 3rd break light would be best.

@WindowTintingBusiness 5 лет назад

I mainly Frankenstein my windows but some shorter tinters can't do that so they use a reverse roll OR if you're like me (5'11''' 200 lbs) the back of two seaters are too small for a Frankenstein so this is an option.

@thedoublea3126 3 года назад

What a way not to cover someone’s seats.

@andrewduran8365 6 лет назад

Lol

@blairakana9984 3 года назад

This guy is lying. You cannot takeoff the clear liner when it’s facing you and it should be facing the glass instead. That Tint will probably not stick to the glass.

@123mcgarrigle 3 года назад

Correct!

@johngaspar4425 3 года назад

this is sad because he could have visually showed it ( as could they all could have done) but they all decided to hide it just to get the viewing clicks. What else are they hiding?

@user-zp7sq8us6o Год назад

@Johnnytint 7 лет назад

Can I ask why? There's no reason you can't just walk in and apply that film cleaner and easier without all the smoke and mirrors.

@WindowTintingBusiness 7 лет назад

Yes you can. I Frankenstein most of my back windows w ease but a good tinter needs to have a number of different tactics at their disposal. I'm 5 foot 11 and 200lbs so it makes it difficult to Frankenstein into a small coupe or other situations where I could possibly contaminate the film before installation. thanks for watching!

@waltk8612 7 лет назад

Hey Patrick!! Just wanted to say you do great work and have really great tips! One thing, when you are peeling the liner to wet it before rolling it I see that as soon as you started you let your hands touch the part that is going to lay right back on the film. Which causes contamination. That's just like putting your hands directly on the glue side of the film. I see a lot of videos where some tinters do that, Maybe it's me? But I always try to avoid any contamination at any cost. Keep up the great work!! My instagram is.....tintcrazy ,if you wanted to check it out.