Yamaha C3/Vox/Giggle - CVT Upgrades! Reveno Clutch and Malossi Variator

Подписаться 2,2 тыс.

Просмотров 2,1 тыс.

50% 1

Time for more upgrades for Big Booty Trudy! In this video, I will be upgrading the CVT transmission on the bike. Gonna be installing a Malossi variator kit, Dr. Pulley sliders and Malossi belt that came with the Big Boy kit from Rolling Wrench, plus a Reveno clutch! While I am working on the bike, I'm going to be putting in an iridium spark plug and titanium hardware from xf50moto, as well.
-----------------------------------------
Parts list:
BIG BOY Performance Kit for Yamaha 50F / Vino 4T / C3
www.rollingwrenchdenver.com/c...
Dr. Pulley Sliders
www.rollingwrenchdenver.com/c...
Reveno Clutch
www.rollingwrenchdenver.com/c...
Titanium Dress Up Hardware
xf50moto.bigcartel.com/produc...
NGK CR7EIX Iridium Spark Plug
amzn.to/3rzc52f
Dragy Performance Meter
amzn.to/3M9WeRn
-----------------------------------------
Chapters:
0:00 Intro
0:39 Parts overview
1:37 CVT disassembly
4:05 Malossi variator install
5:08 Reveno clutch install
7:49 Drive face install
9:09 Dragy intro
10:00 Stock CVT 1/4 mile run
11:00 Upgraded CVT 1/4 mile run
12:17 Real-world results
13:40 Wrap up
-----------------------------------------
Filming equipment I use:
Main Camera - amzn.to/31SVugo
Main Camera Lens - amzn.to/31YrZcU
Gimbal Camera - amzn.to/2PA3r4c
Microphone - amzn.to/3oN1TTm
Camera slider - amzn.to/3pPIK2p
Lighting - amzn.to/3IGcw2d
RGB Light - amzn.to/33bXHnJ
GoPro - amzn.to/3oM92TL
-----------------------------------------
Follow on Social Media!
Facebook - MikesMiniMotors
Instagram - mikes.mini.motors
Twitter - MikesMiniMotors
Website - www.mikesminimotors.com
-----------------------------------------
If you like what I am doing and would like to help contribute to help me make more content
Patreon - www.patreon.com/user?u=53183766
-----------------------------------------
Got a RU-vid channel and want help improving it? Check out TubeBuddy!
www.Tubebuddy.com/MikesMiniMo...
-----------------------------------------
FTC Legal Disclaimer - Some links found in the description box of my videos may be affiliate links, meaning I will make commission on sales you make through my link. This is at no extra cost to you to use my links/codes, it's just one more way to support me and my channel. Thanks for your support!
-----------------------------------------
Music licensed by Audiosocket: 54078, 54087, 65384

Авто/Мото

Опубликовано:

14 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@spencerguignet1210 Месяц назад

looks good! i need that variator

@MikesMiniMotors Месяц назад

Thanks!

@papawheelie5835 Год назад

Nicely done, Mike!

@MikesMiniMotors Год назад

Thank you!

@roywalls5595 Год назад

Thank you for awesome video! Mike

@MikesMiniMotors Год назад

Of course! I'm glad you liked it!

@Tradeofjane 6 месяцев назад

Thanks for actually showing how to install the concave washer. By the way, where did you get the nuts for your variator and clutch?

@MikesMiniMotors 6 месяцев назад

I picked them up here, but they are currently sold out. xf50moto.bigcartel.com/product/yamaha-c3-vox-giggle-titanium-hardware

@thelagmeister Год назад

The bike is looking great Mike. I wish I had one of them Revenos.

@MikesMiniMotors Год назад

Thanks Lag! I'm really liking the Reveno!

@lexushummer98 Год назад

Nice update! I just installed polini variator 241.746. Came with 4.9g rollers. It improved takeoff alot. I'm still in the high 30s on flat and hit a rev limiter at 45 downhill. Time to play with shims and or cdi

@MikesMiniMotors Год назад

Nice, the acceleration was the biggest improvement I noticed too! I installed my Beast Mode tuner already just for the rev-limiter delete, but didn't touch the tuner, I'll mess with the tuning once I finally get around to doing the BBK.

@cliveswabs9365 10 месяцев назад

@@MikesMiniMotors125 cc Vity cdi fits plug n play £10 off e bay

@roywalls5595 Год назад

I been doing alot work on my 07 Piaggio mp3 250ie I purchased it use about 3 years ago and I put all new Variator kit and Dr. pulley slider 21x17 12g & new belt, rebuild the clutch and now greases all the bearings! Only problem I having trouble with how to grease column steering bearings on it! Mr. Mikes

@MikesMiniMotors Год назад

Hopefully you can grease them without having to fully disassemble it! That's the bikenwith two front wheels, right?

@dattran6372 Год назад

My big boy kit didn't come with Dr pulley sliders 🤔

@MikesMiniMotors Год назад

The contents of the kit has changed recently. The sliders may have been added when the up gear kit changed to the Malossi variator in the kit.

@theambienttraveler Год назад

Hey Mike - what was the tool you used to get the flat nut off the clutch?

@MikesMiniMotors Год назад

I used this guy: www.rollingwrenchdenver.com/products/gy6-cutch-pulley-nut-socket?_pos=1&_sid=77bf8f9bc&_ss=r&sca_ref=2317757.Ut0lWw890q

@WesPsWorld Год назад

Was the nut on the clutch a 39mm or 41mm?

@MikesMiniMotors Год назад

It’s been a while since I did it, but I believe it was 39mm.

@WesPsWorld Год назад

@@MikesMiniMotors Thank you so very much. I’m getting ready to change out mine.

@IamMugs 11 месяцев назад

Never ridden or seen one of these so know VERY little. Have a guy willing to sell me one for 400 bucks. Starts and runs perfect BUT it does not move. He says his daughter dropped it and that was the end. I know this is SUPER vague but his mechanic said it "should be an easy fix". Do the belts go south on these? Could it need a whole new setup like what you put in? Tight on cash but want something for my son and know it'll be a gamble no matter what. Just trying to limit that gamble.

@MikesMiniMotors 11 месяцев назад

Wow, $400 sounds like a pretty good deal if the bike runs and has a title! It’s would be really hard to tell you what’s wrong, but parts can be picked up for these bikes fairly cheap. You don’t have to go with the higher performance parts and can get standard parts to save some money.