Тёмный

🤠 DIY: How to program your Viper Remote Entry Key FOB. Easy Walk Through Guide. 

Jungle Explorer
Подписаться 22 тыс.
Просмотров 237 тыс.
50% 1

#AD 💥 Viper 7145V 4-Button Remote ---- amzn.to/2mUgCLy
#AD 💥 eBay: Viper 7145V 4-Button Remote ---- ebay.us/XZ7QSg
In this DIY video, I show how to program a Viper security systems key fob remote control. I give a step-by-step walk-through programming guide to pairing your Viper car remote. I use a Viper remote FOB model 7145V in this video, but these instructions will work for many other models as well. Programming your remote may be slightly different depending on which system you have. To pair your remote, you have to locate the Valet control button which is located on the windshield above the review mirror on most vehicles but may be located in someplace else on your car. Once you locate the valet control button, programming your Viper car remote fob is easy after that. This easy programming guide for your Viper remote will help you learn how to pair your remote control, quick and simple.
Product Links:
Viper 7145V 4-Button Remote ---- amzn.to/2mUgCLy
VIDEO EQUIPMENT used to make this video
1. AKASO EK7000 4K30FPS 20MP Action Camera ------------amzn.to/3wdUE8W
--------------------------------------------------------
Please Note: In the event that a product used in this video has been discontinued, the product link will be replaced with a comparable product from the same manufacturer if available.
DISCLAIMER: This video and description contain affiliate links
Thank you for visiting the jungle explorer channel. DISCLOSURE: This video and description contain Affiliate Links, which means that I may earn commissions through links you make purchases through.
DISCLAIMER: All information and actions covered in this video are our opinions and are for entertainment and informational purposes only. They are not intended to be viewed as professional or legal advice. If you choose to use or follow any of the information in this video, you do so at your own risk and agree that you are responsible for your own actions.
Thank you for visiting the jungle explorer channel.

Хобби

Опубликовано:

 

28 июл 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 353   
@thejungleexplorer
@thejungleexplorer 6 лет назад
🙏If you found this video helpful, please consider sending a couple bucks my way to say thank you by hitting the THANKS button under the video 💲❤. You can't imagine how much I would appreciate it. 🥰
@mannykost5
@mannykost5 4 месяца назад
I saw so many videos, but yours was the only one that helped me and explained it, so simply without making me feel like I’m an idiot. Thank you so much.
@thejungleexplorer
@thejungleexplorer 4 месяца назад
My pleasure. I am glad the video helped you out.
@vicente5776
@vicente5776 Месяц назад
Thank You I have been trying to fix my remotes for more than a year. They work now 🥰
@thejungleexplorer
@thejungleexplorer Месяц назад
Glad I could help
@JennyBriganti
@JennyBriganti 5 лет назад
Thank you so much!!! That was so simple and direct. The directions really are horrendous. Viper needs to pay you.
@thejungleexplorer
@thejungleexplorer 5 лет назад
You are very welcome. I am glad I was able to help.
@Code_Blue_Xj
@Code_Blue_Xj 10 месяцев назад
Absolute life saver, just did this on my 7146v worked perfectly first try.
@thejungleexplorer
@thejungleexplorer 10 месяцев назад
Awesome. Glad it worked for you.
@gpaje
@gpaje 2 года назад
Worked perfectly, I have an older Viper where the button isn't integrated with the antenna, it was located under my dash, but the procedure is exactly the same. Thank you sir, you are doing God's work!
@melissadennison961
@melissadennison961 2 года назад
anybody show a picture or video of this button??
@gpaje
@gpaje 2 года назад
@@melissadennison961 You can't post that in the comments sections, search image Viper Valet Button. It's a rudimentary plastic button, attached to a plastic washer and cable that is designed to be drilled and attached behind the dash, glovebox, lower section of the dash, etc. You should see a cheap black plastic button. Again, most likely location is in the glove box, either inside the box or around the frame of the glovebox, also under the dash section below the steering wheel is another popular location.
@johnlisiecki4439
@johnlisiecki4439 3 года назад
Worked the first time I tried. Thanks a bunch.
@chasugc3740
@chasugc3740 Год назад
Thanks, really easy. Watched it one time and it took two tries on my alarm to get it to program. Kudos amigo. 👏👍🖖Live long and prosper.
@thejungleexplorer
@thejungleexplorer Год назад
Thanks, man. Have an awesome day,
@charliehustle2579
@charliehustle2579 Год назад
Thanks for this! This thing was driving me crazy and you made it so simple!
@thejungleexplorer
@thejungleexplorer Год назад
My pleasure. Glad you enjoyed it.
@sandakureva
@sandakureva 3 года назад
Dude you saved my bacon with this video. My fob died and this was exactly what I needed.
@eddiprosper4347
@eddiprosper4347 Год назад
Dude, your video is spot-on! But I think you would get a lot more views if you aimed your smartphone camera just a little bit higher and took a picture of that little plastic black button thing that they put on your rear-view mirror. You don't have to hold your lip just right, just aim that smartphone camera just a little bit higher on your rear-view mirror and make sure you get that little plastic black button thing in the picture and I swear you'll get a billion hits! Do the video exactly the same way as did before, except aim that smartphone camera a little bit higher on that little plastic black button thing, and you'll get a billion views!!! Money!!!
@jrs89lxzamora88
@jrs89lxzamora88 Год назад
Thanks for the video it helped my car had this model 7145V but I don't know what I did that the noice bib wouldn't sound anymore thanks to your video I reset it and I could hear the alarm arm and disarm.,👍 God bless and stay save my ma
@thejungleexplorer
@thejungleexplorer Год назад
My pleasure. So glad it helped. God bless you too.
@sergiocuriel4503
@sergiocuriel4503 2 года назад
Thank you so much jungle explorer for post this you made my day
@oscarlopez-ju3xj
@oscarlopez-ju3xj 3 года назад
It worked! Thank You.
@jimmyhotel8061
@jimmyhotel8061 5 лет назад
Thanks for posting this!
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Jimmy Hotel! I am so glad the video was helpful.
@HAWAIIAN-HULK-808
@HAWAIIAN-HULK-808 2 года назад
Yesahhh mahaloz bra!supa easy clear instructions!🤙🏾💪🏽
@thomasburnett8266
@thomasburnett8266 Месяц назад
Simple and to the point! That is the best video. And it worked perfect. Thank You!
@thejungleexplorer
@thejungleexplorer Месяц назад
You are welcome. Glad it was helpful.
@carlosnazariomunguiatorres6588
@carlosnazariomunguiatorres6588 2 года назад
Hey I just wanted to thank you for your video that really help me all the way in Mexico !!! Gracias amigo
@thejungleexplorer
@thejungleexplorer 2 года назад
De nada me amigo. Tenga una buena día.
@michaelmorris9989
@michaelmorris9989 2 года назад
Maaannnnn that crazy I’ve been needing this since my big remote ended up in the washer machine
@thejungleexplorer
@thejungleexplorer 2 года назад
My pleasure. Glad it helped.
@zacharyclark6710
@zacharyclark6710 3 года назад
Finally a helpful video
@mattolaf4803
@mattolaf4803 2 года назад
Thanks man was so hard to figure out before I saw this video
@thejungleexplorer
@thejungleexplorer 2 года назад
My pleasure. Glad it helped
@shooota3
@shooota3 Год назад
Myyyyyu guyyyy!!! Don’t comment on RU-vid….. youu neeeeeded it!!!! Was stuck in valet mode for more than a year…. This helped … instead of the button on top by the sensor I pressed the orange alert button 7 times and held on the 8th with the door open!!!! If I cud hug the shit out of you I would!!! Much love and thanks all the way from Trinidad 😭😭😭😭🙏🏽🙏🏽🐄
@thejungleexplorer
@thejungleexplorer Год назад
So glad I could help. I want to visit Trinidad some day. I bet it is beautiful there . 😍
@danboren6567
@danboren6567 6 лет назад
Thank you, very well done and informative!
@percua
@percua 5 лет назад
as simple as that, thank you so much!!
@thejungleexplorer
@thejungleexplorer 5 лет назад
My Pleasure. Glad it helped.
@chupie123456
@chupie123456 2 года назад
hi Jungle Explorer thanks for posting on my viper model # 550esp it was not working so I pressed the button 8 times and held it down on the ninth and it worked once again pressed 8 times released it and pressed it 1 more time and held it down and it worked. all other instructions the same, again thanks for posting.
@billarroo1
@billarroo1 5 лет назад
Thanks, u make it easy, Thanks again.
@thejungleexplorer
@thejungleexplorer 5 лет назад
You're welcome
@Nick52547
@Nick52547 3 месяца назад
Thanks so much! Worked on my old F150.
@thejungleexplorer
@thejungleexplorer 3 месяца назад
My pleasure. Glad to be of assistance.
@jamesyoung7230
@jamesyoung7230 5 лет назад
You need - Key - Remote Entry Fog - Access to the Transmitter Control Button on the overhead control centre. To Program the Fob - Open the driver door (NB: I had my cabin light switched off to avoid accidentally leaving it on. BUT ... the only way the alarm knows if the door is open is by the interior light coming on. So, you need to have the interior light set to 'on' when the door opens. Otherwise the programming does not work.) - Turn the key in the ignition to the 'On' position - Press the overhead transmitter control button 7 times THEN PRESS AND HOLD ON THE 8th PRESS (At this point the alarm will chirp) - Whilst still pressing the transmitter button press the REMOTE KEY FOB LOCK BUTTON (At this point the alarm will sound, briefly) - Turn the ignition key off - Close door - Test Key Fob programming has worked by arming and disarming the vehicle with the fob.
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting James Young! Thank you for this great information James Young. I appreciate it very much when viewers contribute useful information as you have here.
@kimberlydelangel1590
@kimberlydelangel1590 2 года назад
Thank goodness I watch your video and it work thank you
@thejungleexplorer
@thejungleexplorer 2 года назад
My pleasure. Glad it helped
@gary6463
@gary6463 9 месяцев назад
Thanks for making this video. I need to buy replacement Viper Remote and get it paired .I was reading all the Amazon reviews how to get it paired. I'm thinking it a little nightmare on my hands😵‍💫. So glad I came across your Viper Pairing video. Thank you for showing how easy it is to getting it paired . Your video was the best video. 👏🏻👏🏻👏🏻😃 Thank you for helping me out. I even subscribe to your You Tube Channel
@thejungleexplorer
@thejungleexplorer 9 месяцев назад
You are very welcome. I am so glad it helped you out.
@gary6463
@gary6463 9 месяцев назад
@@thejungleexplorer Good job on this video. It took all the guess work learning how ez it is to pair a Viper remote control . Many thanks !!👍🏻😀
@ROBERTELECTRIC1
@ROBERTELECTRIC1 2 года назад
Nice . Thank you . It works perfect.
@thejungleexplorer
@thejungleexplorer 2 года назад
You're welcome!
@mcarbajalc
@mcarbajalc 4 года назад
Thanks, ir works for my viper previous version too
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting mcarbajalc! I am so glad the video was helpful.
@stikle
@stikle 4 года назад
Yep, thanks for this!
@thejungleexplorer
@thejungleexplorer 2 года назад
My pleasure. Glad it helped
@jennifergonzalez8893
@jennifergonzalez8893 3 года назад
Thanks so much!!!
@maveric8751
@maveric8751 3 года назад
Thank you! I did mine!
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Jerry Masloff! I am so glad the video was helpful.
@matthewshortt9526
@matthewshortt9526 2 года назад
Huge help thx
@Rebel9668
@Rebel9668 5 лет назад
Just changed the batteries in my 7142v and went outside to try this and my door was locked. I hadn't locked it when I got out of it but I had pressed the lock button when I put the new batteries into my old fob. Pressed the unlock button and it opened right up. Pressed the star button and the starter engaged and it fired right up. Glad I didn't need to reprogram after changing batteries because I bought this vehicle used and my fuse box is under the hood and I have noooooooo idea where that button on the wire is, lol.
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Rebel9668!
@felixcastaneda8298
@felixcastaneda8298 2 года назад
Thank you very much
@dannydean2077
@dannydean2077 2 года назад
Thank you!!
@ericbenitez7210
@ericbenitez7210 2 года назад
Thanks you so much for this videos
@thejungleexplorer
@thejungleexplorer 2 года назад
Your welcome
@unclerogelio3636
@unclerogelio3636 5 лет назад
Thank you sir !
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Uncle Rogelio! I am so glad the video was helpful.
@MartinezRE1
@MartinezRE1 3 года назад
Thank you
@DominiqueWillkins
@DominiqueWillkins 3 года назад
Worked like a charm! Thanks a lot, friend.
@darylfriedrich620
@darylfriedrich620 Год назад
Thank you!
@thejungleexplorer
@thejungleexplorer Год назад
My pleasure.
@stoundingresults
@stoundingresults 5 лет назад
You the Man✌
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Jeb Garcia! I am so glad the video was helpful.
@Truckngirl
@Truckngirl 7 месяцев назад
It works!! Ty!😊
@thejungleexplorer
@thejungleexplorer 7 месяцев назад
Thank you for commenting @Truckngirl! I am so glad the video was helpful.
@jonathansanchez9064
@jonathansanchez9064 5 лет назад
Thank you brother
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Jonathan Sanchez! I am so glad the video was helpful.
@Il_ZEUS_Il
@Il_ZEUS_Il 5 лет назад
Great thx perfect
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting ZEUS! I am so glad the video was helpful.
@julianrizo1483
@julianrizo1483 5 лет назад
Thank you so much
@thejungleexplorer
@thejungleexplorer 5 лет назад
Your are welcome
@venck1971
@venck1971 4 года назад
Excelent , thanks
@thejungleexplorer
@thejungleexplorer 2 года назад
My pleasure. Glad it helped
@ricoquinones1288
@ricoquinones1288 4 года назад
Yup out of all the videos watched urs was directly on point.thx
@SandmanJr90
@SandmanJr90 5 лет назад
Thank you so much this worked for my single button keyless entry remote as well
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for this great information Ben Lumsden. I appreciate it very much when viewers contribute useful information as you have here.
@angelagrome1504
@angelagrome1504 4 года назад
I had the 7145v remote leftover from an old car I sold. My new car came with two 7146V remotes one of which was lost and the other broken. Though I ordered a new one, I figured I would try to get the old 7145v one to work with this newer system. Unfortunately using the method in the video didn't work. I looked up how to program the 7146v video. With that method, you have to press the valet button once to activate it. Then you have to press the remote start button to pair it. That didn't work either. So I tried combining the methods. I pressed the valet button once to activate it, then 8 presses holding on the 8th press, then pressed the Start button on the fob once and the dash lights flashed twice and the car just started. I stepped on the brakes to turn it off. Turned off the ignition and removed the key. Closed the door and tested the locks, they worked. Hit the remote start button, it worked and opened the trunk with the Aux. So if you cannot get the video's method to work, try like I did and maybe that'll work for you too?
@thejungleexplorer
@thejungleexplorer 4 года назад
Great Advice. Thanks!
@akwolf7948
@akwolf7948 5 лет назад
Thanks
@thejungleexplorer
@thejungleexplorer 5 лет назад
You're Welcome.
@bennyperez6231
@bennyperez6231 4 года назад
👍thank you
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Benny Perez! I am so glad the video was helpful.
@melissap9808
@melissap9808 Год назад
Skip to 2:03 Thank you, excellent instructions 🙂
@thejungleexplorer
@thejungleexplorer Год назад
My pleasure. Glad it helped you out.
@jerryi8241
@jerryi8241 Год назад
Great Video. Would the steps you provided in the video also program my trunk and remote starter as well? I need to replace my viper 7142v remotes as they have seen better days. Please advise. Thank You
@thejungleexplorer
@thejungleexplorer Год назад
I do not know. My truck does not have those functions.
@wayneneva1
@wayneneva1 4 года назад
This is simple. Thanks How about the Auto Start feature?
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Wayne Neva!
@davidb4236
@davidb4236 5 лет назад
Why Viper/DE makes it so difficult for the end user to program a replacement remote is beyond me. Huge thanks to Jungle Explorer for making a short video showing how easy it is.
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting David B! I am so glad the video was helpful.
@williamburke9647
@williamburke9647 17 дней назад
I have a 7146v remote and it came with instructions on the back that actually worked. The model numbers on the package didn't match also then I found those numbers are for the brain unit not the remote. But open the door, turn key to on position. Within 5 seconds press and release the valet button the number of times listed for your unit. ( Only 2 units listed so try it both ways if first doesn't work). Then press and hold valet button. It will flash the number you press first. It will beep horn then press lock while still holding valet button. My locks clicked immediately. I have a picture of directions but can't up load here. Hope this helps
@thejungleexplorer
@thejungleexplorer 9 дней назад
Thanks for commenting.
@disto573
@disto573 4 года назад
For the viper 4105v model that does not have the button on the transmitter, I used the valet button. This is a 2 wire black push switch that connects to the top of module near led indicator light, trace from module to find switch. Steps: T 1. Turn ignition on 2. Within 5 secs Press valet switch once and let go. 3. Within 5 secs or releasing valet switch, press it again and hold. 4. While holding valet switch press the lock button on remote, at this time the horn will activate to indicate remote was programmed. 5. Release valet switch and turn off ignition. Horn will sound a long blast to indicate the exit of programming. 6. Test remote by pressing lock, unlock etc. Good luck
@virginiafrancis403
@virginiafrancis403 4 года назад
disto573 this got mine to pair but only one button... the lock button is working for both lock/unlock. Also, there is no chirp or horn noises.
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting disto573!
@arturobarroso78
@arturobarroso78 Год назад
Thanks a lot I just bought a car but the viper alarm stopped working, I replaced the batteries on the remote, but I think the remote stopped working because there is no lights on it when I press any button, I order a remote, thanks again, now I know how to program it
@thejungleexplorer
@thejungleexplorer Год назад
Yeah, my old original Viper remote wore out and did the same thing. Just stopped working. A new one solved the issue.
@cjmilly5727
@cjmilly5727 2 года назад
For anytine struggling on model 7146v remote I ended up programming my 7146v remote by - step 1- Open the car door Step 2- Turn ON vehicle Step 3- Press control button 8 times hold on 8 Step 4- Hold lock button on remote as its chirping Then it should be set test it out
@thejungleexplorer
@thejungleexplorer 2 года назад
Great information.
@mbravo9854
@mbravo9854 Год назад
Mine chirps after I press the button 5 times and does nothing on the 8th
@ronniefrench4099
@ronniefrench4099 3 года назад
I lost my instructions for my back up remote and I do have that one 5105v can you help out. Mine chirps after 5. Thanks
@ROBERTELECTRIC1
@ROBERTELECTRIC1 2 года назад
Please can you make video. How to go valet mode and back to shark mode for the same viper model? Thanks
@thejungleexplorer
@thejungleexplorer 2 года назад
I have no idea. Sorry.
@alloutofdonuts3998
@alloutofdonuts3998 5 лет назад
Does this work with a used remote or only new? Also, my car has the button and an on/off switch right next to eachother in the fuse box area. The on/off switch seems to only turn on/off the remote start function. The (original remote) still locks/unlocks/arms alarm.
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Alloutofdonuts! I am sorry, I do not know how to answer this question.
@sukhdhaliwal6377
@sukhdhaliwal6377 2 года назад
Couple of Questions: 1- Is this only to program lock/unlock function on the remote? 2- I am looking to program one as a spare, but a spare with the same command start feature as original? Will programing it also enable the auto start feature or is it good for only locking/unlocking?
@thejungleexplorer
@thejungleexplorer 2 года назад
There are many models of systems and FOBs. I can only speak for this one. My assumption is that if you program the right FOB to the right system, then all features of the system should work. That seems to be the most logical way it should work, at least to me.
@alexlopez9240
@alexlopez9240 Год назад
Okay got mines programmed but it will lock and unlock with the lock button ? My unlock button doesn’t do the unlocking but the lock button works as both. Anything I can try to make it normal ?
@thejungleexplorer
@thejungleexplorer Год назад
Thank you for commenting Alex Lopez! I am sorry, I do not know how to answer this question.
@osvaldosalazar8120
@osvaldosalazar8120 4 года назад
Ur so awesome :)
@jerrylilkrumzy3506
@jerrylilkrumzy3506 5 лет назад
What if the aux is programmed to the windows will it automatically program to original viper remote settings ?
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting jerry lilkrumzy. Unfortunately, this question is too complicated to answer without visual inspection.
@mcmarine777
@mcmarine777 2 года назад
***NOTE: This may work for many systems, but the number of presses of the valet button differs depending upon the type of security system you have installed. My system beeped at 5 presses BUT still did not program. Mine programmed with one (1) press of the valet button, for whatever reason. It worked using all the procedures in this video but with only one press.
@thejungleexplorer
@thejungleexplorer 2 года назад
Good information. Thanks for commenting
@thejungleexplorer
@thejungleexplorer Год назад
It may be the FOB that is bad.
@ClassicGoldCigarettes
@ClassicGoldCigarettes 10 месяцев назад
Thanks boys. Mine was also beeping at 5 clicks. My systems procedure was 2 clicks hold on second. Additionally, my valet button was tucked under the wheel column dash near the unit. It wasn’t tactile and needed to be firmly pressed.
@mannyrosa2522
@mannyrosa2522 9 месяцев назад
lifesaver thank you
@chrisolson5071
@chrisolson5071 5 лет назад
I have the 7145v model
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Chris Olson! I am so glad the video was helpful.
@chemenger1
@chemenger1 8 месяцев назад
Thanks for this video. My viper 7145v locks/unlock my car but won't start the car after I replaced my car battery. I tried to ise your video but my problem I couldn't find any control button on the transmitter. Any idea where this could be hidden?
@thejungleexplorer
@thejungleexplorer 8 месяцев назад
You're welcome. Glad it helped.
@techstermb
@techstermb 2 года назад
I programed my key FOB using your video, which worked, but it now appears that the alarm system is draining the battery. I have the Viper XR Plus alarm system. Do you have any ideas on what might have happened?
@thejungleexplorer
@thejungleexplorer 2 года назад
Sorry man, I don't know what is causing this. Souns to me like some sort of ground short, but those are almost imnposible to find.
@goodvibes7104
@goodvibes7104 7 месяцев назад
Hello, do you know how to turn down the sensitivity? I have the same viper alarm.
@thejungleexplorer
@thejungleexplorer 7 месяцев назад
Thank you for commenting N! I am sorry, I do not know how to answer this question.
@ThomWalbranA1
@ThomWalbranA1 Год назад
T H A N K Y O U !!!
@thejungleexplorer
@thejungleexplorer Год назад
My pleasure. Glad it helped.
@TomekinaOfa
@TomekinaOfa 3 года назад
Thanks for this. My problem is that the alarm is active while trying to do this. My former key fob was washed and now I can't deactivate the alarm in order for me to pair a new one. Any suggestions?
@thejungleexplorer
@thejungleexplorer 3 года назад
Sorry to hear that. Man, I don't know what to tell you. I would try taking the battery out and putting your former fob in a bag of rice for a few days and then try it again. It may still work. It is worth a shot.
@TomekinaOfa
@TomekinaOfa 2 года назад
@@thejungleexplorerhas anyone ran into an issue where it's not programming after this step just won't sync
@thejungleexplorer
@thejungleexplorer 2 года назад
@@TomekinaOfa For the most part this method works for most people. However, not all viper systems are the same as this one and it doe snot work for other systems made by viper. I personally only have experience with this system because it is installed in my truck. I have no experience with any other viper system.
@TomekinaOfa
@TomekinaOfa 2 года назад
@@thejungleexplorer yeah, I hear you. Just wanted to see if anyone else has had the issue that I have but found another way to do it
@brandonbretao4621
@brandonbretao4621 Год назад
What buttons do you hit on the remote to remote start it after it’s set up?
@thejungleexplorer
@thejungleexplorer Год назад
The remote in this video does not have a Remote Start function.
@payalsurati225
@payalsurati225 5 лет назад
I have a 7142v model would it be the same process? I replaced my car battery and now the remote starter is discounted.
@johnhoward5300
@johnhoward5300 5 лет назад
I don't know that model, but it will not hurt anything to give it a try.
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Payal Surati! I am sorry, I do not know how to answer this question.
@shahzadam21
@shahzadam21 5 лет назад
Hello there i have Viper 5301 in honda 2002 its working very good but i lost my 1st remote i have 2nd one can you help me out how can i programming other 2nd remote Thank
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting coin point! I am sorry, I do not know how to answer this question.
@donbunn6102
@donbunn6102 5 лет назад
Do you have to reprogram existing remotes as well, i.e., does programing your new remote effect existing remote programs.
@thejungleexplorer
@thejungleexplorer 5 лет назад
No. You should not have to reprogram existing remotes.
@johnlisiecki4439
@johnlisiecki4439 3 года назад
no
@jericovega5290
@jericovega5290 5 лет назад
How do you do an old viper remote and the starter behind the mirror the thing has no button
@jamesparks2896
@jamesparks2896 4 года назад
Need to know the same
@brookebanfe5398
@brookebanfe5398 4 года назад
Same problem!! I’m so confused
@hiddenreaper6796
@hiddenreaper6796 4 года назад
Brooke Banfe I need help with it did you find a way?
@brookebanfe5398
@brookebanfe5398 4 года назад
HiddenReaper ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ydPMf-XeC7o.html
@brookebanfe5398
@brookebanfe5398 4 года назад
HiddenReaper I haven’t had time to do it yet but I think this will help.
@realfmtbandz9687
@realfmtbandz9687 4 года назад
Can I do this if I lost all remotes but have the key? And my car won't start it just keeps setting the alarm off when I try to turn it on
@thejungleexplorer
@thejungleexplorer 2 года назад
Sorry, I don't know the answer.
@christophergrove4876
@christophergrove4876 3 года назад
THANK YOU! Unfortunately my model (7146v, which SEEMS to have the same control center) ALSO is difficult to find the instructions for and does NOT match YOUR model. I find it AMAZING that they don't seem to want to support their products with complete information. Thanks for trying to help us all! :-)
@derickponce-sanchez772
@derickponce-sanchez772 2 года назад
Did it work for your 7146?
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Christopher Grove!
@cjmilly5727
@cjmilly5727 2 года назад
I endsd up getting it if you still need help
@cjmilly5727
@cjmilly5727 2 года назад
@@derickponce-sanchez772 i finally got itnif you need help my man
@cjmilly5727
@cjmilly5727 2 года назад
@@derickponce-sanchez772 I've mentioned a step by step comment down below yours hopefully that helps man it took me like 10 tries before I finally got it right
@jaypersiani2879
@jaypersiani2879 5 лет назад
i had 2 of these 7145v remotes programmed for my truck. but the horn beeps twice each time. how can i turn off the horn noise. just want it to lock and unlock
@thejungleexplorer
@thejungleexplorer 5 лет назад
Hi. The function you are talking about is a function of the Viper security system, not the remote. The Viper system should have a "Silent Mode" but how you turn it on may be different for each system. You will need to find out which model of Viper system you have and locate an instruction manual for that model. Without knowing the model of your system, it is impossible to know how to turn on the silent mode. Sorry I could not help.
@seemaasafa6200
@seemaasafa6200 5 лет назад
Hii I wonder if you know how can i fix my car which have the same model remote but it is not chirping althought it locks and unlocks
@thejungleexplorer
@thejungleexplorer 5 лет назад
Sorry. Not sure how to help you with this one. I would it is something with the system itself.
@seemaasafa6200
@seemaasafa6200 4 года назад
Solved With the door opened press lock button then aux then lock again its will get it in/out from valet mode
@javierlopez3873
@javierlopez3873 4 года назад
Why does my viper not start in the winter when I need it ? Battery or some thing ?
@thejungleexplorer
@thejungleexplorer 4 года назад
Extreme cold temperatures can effect batteries, but I don't know that is your problem. It is really hard to tell without being able to test it in person. Changing the battery is a good place to start though.
@guyD0
@guyD0 Месяц назад
Any idea on how to do the ch2? I had two fobs break and need to program a third
@thejungleexplorer
@thejungleexplorer Месяц назад
Sorry, I am not familiar with that process.
@frankorellana4634
@frankorellana4634 4 года назад
I've the model 7146v for my car and everything I put my car in neutral for the express wash. My alarm stops working. The thingy on the windshield stopped blinking the blue light.
@thejungleexplorer
@thejungleexplorer 2 года назад
Sounds like a system issue. Might need to have a technician look at it.
@starsun3070
@starsun3070 3 года назад
Can you program this remote to a different viper model unit?
@thejungleexplorer
@thejungleexplorer 2 года назад
Sorry, I don't know.
@Larry5to
@Larry5to 2 года назад
Just bought a truck and it has the same viper alarm I bought a remote trying to program it but the reciever button doesn’t work doesn’t light up any recommendations?
@thejungleexplorer
@thejungleexplorer 2 года назад
Sorry. I don't know what to tell you. There are several models and I only know mine.
@fabiantapia4590
@fabiantapia4590 2 года назад
Do u think it works with different models or does it need to be only viper models?
@thejungleexplorer
@thejungleexplorer 2 года назад
This guide is for certain viper models.
@jameskuntz1275
@jameskuntz1275 5 лет назад
I have the same keyfob but when I went to push the button on the receiver that is above the mirror there is no button there mine is the 7145v model if that helps. Thanks.
@thejungleexplorer
@thejungleexplorer 5 лет назад
Look under the dash on the driver's side. Look for a small button. Some installers my also put it in the engine compartment.
@jameskuntz1275
@jameskuntz1275 5 лет назад
I've looked under the drivers side and under the hood and didn't see any button. To be clear I do have the windshield mounted antenna and I read that the button is supposed to be on it. Mine is not though. Mine is a remote start system. It never chirped either, but it's the exact same model number. I'm probably going to have to go to a stereo shop to figure out where it is located. If it's even there.
@jameskuntz1275
@jameskuntz1275 5 лет назад
What exactly does the button look like? Is it just a little black button glued on somewhere?
@bryceberliner2174
@bryceberliner2174 6 месяцев назад
Does this work for all viper systems? I have an older system and just looking for an answer before I buy this new remote fob. Current fob I have the plastic back fell off so battery is being held by electrical tape / I don’t use it anymore.
@thejungleexplorer
@thejungleexplorer 6 месяцев назад
I am not sure.
@quacypeters2939
@quacypeters2939 5 лет назад
hey, does this come with the batteries in it ?
@thejungleexplorer
@thejungleexplorer 5 лет назад
Yes
@madnessgames5689
@madnessgames5689 4 года назад
i have this system in my truck. i had to unplug the battery to do some work on it, and the remote stopped working. it just blinks and doesn't do anything. i need help please?
@thejungleexplorer
@thejungleexplorer 4 года назад
If you have tried the steps in this video, then I would contact Viper support for help. www.viper.com/support/
@rain7096
@rain7096 3 месяца назад
👍
@gbbghhh8153
@gbbghhh8153 4 года назад
Can you still do it even if you loose the original remote and have no keys for the car??
@thejungleexplorer
@thejungleexplorer 4 года назад
No
@chrisolson5071
@chrisolson5071 5 лет назад
How do you set the proximity sensor?
@thejungleexplorer
@thejungleexplorer 2 года назад
Thank you for commenting Chris Olson! I am sorry, I do not know how to answer this question.
@lsmith4971
@lsmith4971 Год назад
Double whammy here….I lost the original remote and my battery is dead. I know once I replace the battery, the alarm will go off because the door will be open. Do you know if the device will be/can be paired while the alarm is going off? I have the model 5105v. Thanks.
@thejungleexplorer
@thejungleexplorer Год назад
Sorry friend. I do not know the answer. I would contact Viper about this.
@TheOriganalBanana
@TheOriganalBanana 5 лет назад
Mines doesn’t have a button. The instructions manual says press valet button which i can’t find. Model is Viper 7111v. Any help will be appreciated. Thank you
@thejungleexplorer
@thejungleexplorer 5 лет назад
On older models of this Viper system, the button is in a separate location. The installer of the system would have chosen where to put it, so there is no way to know exactly where it is. In most cases, it will be under the dash below the steering column
@TheOriganalBanana
@TheOriganalBanana 5 лет назад
Jungle Explorer ok thank you, I’ll have a look.
Далее
Viper 4606V Remote Starter Review
7:34
Просмотров 186 тыс.
How to pair your viper ds4 or ds4+ remote
3:20
Просмотров 90 тыс.
Viper remote 7145V programming - button location
2:46
Valet Mode? How does it work? / JMK
6:07
Просмотров 1 млн
Programming Functions in a VIPER Alarm / JMK
4:28
Просмотров 85 тыс.
Top 5 Best Car Alarms 2023
6:02
Просмотров 20 тыс.
Common Remote Start Problems and Fixes
3:08
Просмотров 116 тыс.
How to program Viper Alarm Remote
4:53
Просмотров 115 тыс.
dog jumping in pool #funnyanimals #comedy #funny
0:21
Я не голоден
1:00
Просмотров 3,1 млн