Тёмный

2010 charger thermostat location replace dodge 2.7L water outlet housing coolant leak overheating 

FerKurl
Подписаться 39 тыс.
Просмотров 34 тыс.
50% 1

Thermostat location. Replacing changing installing a #thermostat #wateroutlet and housing and gasket O-ring on a Dodge #Charger 2010 model year 2.7L pretty similar on 3.5L 5.9L hemi. How to video with tips short and simple. Don’t confuse water pump weep hole leak with housing coolant leak.
My Amazon store for featured tools & products: www.amazon.com/shop/carlsgarage
My website for merch/tools/products/contact/socials: direct.me/carlsgarage
Disclaimer:
Due to factors beyond the control of FerKurl, I cannot guarantee against improper use or unauthorized modifications of this information. FerKurl assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FerKurl recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FerKurl, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FerKurl.

Авто/Мото

Опубликовано:

 

12 май 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@meishaalashayy2429
@meishaalashayy2429 2 года назад
got one that needs to be replaced...thanks for the better idea of what's wrong with my car lol as a female i don't know too much about cars , but I'm learning. Thanks for this video!!!! ❤
@bowtieboy4273
@bowtieboy4273 2 года назад
Great video thank you for taking the time!
@MeAbility
@MeAbility Год назад
Thank you for sharing. This helped me
@CoenYT
@CoenYT 4 года назад
Good vid 😀
@matthewramos7605
@matthewramos7605 11 месяцев назад
Man i just got mine out and it took me so long but now im leaving it for the morning It took me a day because other videos are showing me different but i was standing over it and telling asking my self if i was dumb or what i don't see what the see nor i have small hands to get under it like they did.
@Ronnie-zn9sx
@Ronnie-zn9sx 3 года назад
I did mine with cylinder heads off during engine rebuild it was still a hassle! I did not change the o ring on that tube and am now paying the price of doing it again. Only way to go is removing the p/s pump but this time I'll remove the bracket also. Thanks for the video.
@FerKurl
@FerKurl 3 года назад
Thx for watching!
@herremino
@herremino 2 года назад
How do you get the metal hose back in?
@bernardohernandez6746
@bernardohernandez6746 2 года назад
Hello, good morning, I have that same car, and it's warming up, and the heads were changed and so on, but it keeps heating up. He tells me the mechanic is the thermostat but I don't have any more arrangements. I would have to close it myself. Would you help me by guiding me, please
@finessemttm1620
@finessemttm1620 Год назад
Did that fix the problem got the same thin 05 2.7
@TheFeelgoodmuzik
@TheFeelgoodmuzik 9 месяцев назад
so did you have to replace the water pump?
@caraddicts728
@caraddicts728 3 года назад
Im doing the same job to a chrysler 2006 does any have trouble removing the thermostat housing because for some reason it dont move
@FerKurl
@FerKurl 3 года назад
If all 3 bolts are out and that pipe is out of the way then pry it off
@pedroguzman9921
@pedroguzman9921 Год назад
Disculpa como se llama ese tuvo
@pedroguzman9921
@pedroguzman9921 Год назад
Cómo se llama ese tubo
@daleriggsiii6785
@daleriggsiii6785 3 года назад
Any secret to getting the thermostat/gasket into the housing evenly. I can't seem to get it perfectly.
@FerKurl
@FerKurl 3 года назад
Perhaps something is warped? If I’m understanding your question correctly
@daleriggsiii6785
@daleriggsiii6785 3 года назад
@@FerKurl i appreciate the reply. The auto part store gave me the wrong part.
@tebethblaker777
@tebethblaker777 4 года назад
How would you suggest the mystery leak, when it only leaks when running hot and/or under pressure; then it disappears when off/cool?
@FerKurl
@FerKurl 4 года назад
Tebeth Blaker use a cooling system pressure tester. Usually a radiator, water pump or heater/radiator hose. Sometimes warped head/bad gasket or heater core.
@lucakhari4512
@lucakhari4512 3 года назад
a trick: watch series on flixzone. Me and my gf have been using them for watching lots of of movies these days.
@zaneturner6495
@zaneturner6495 3 года назад
@Luca Khari definitely, have been watching on Flixzone for since december myself =)
@Rjj2721
@Rjj2721 Год назад
Most thermostats and water pumps have a weep hole that leaks to let pressure off.
@sethdunn96
@sethdunn96 Год назад
So with this leak here, was this the weep hole leaking? And as such it is the water pump that is bad?
@bamram2673
@bamram2673 Год назад
Only God knows.
@lazaropegudo3567
@lazaropegudo3567 2 года назад
Cosa fasil me cuesta quital el tornilito de habajo ufff
@MISTAT45
@MISTAT45 5 месяцев назад
Thermastat gasket will fix it
@raakmore4443
@raakmore4443 2 года назад
What's the part number to the o ring?
@FerKurl
@FerKurl 2 года назад
Not sure. That was awhile ago. Check with your local parts store
@lorenzoortiz754
@lorenzoortiz754 2 года назад
Also been looking for the part # for that o ring Chrysler dealer discontinued it where I live
@jpasley69
@jpasley69 3 года назад
Thats the water pump leaking
@jpasley69
@jpasley69 3 года назад
The weap hold drans by the thermostat housing instead of in the oil pan
@FerKurl
@FerKurl 3 года назад
Johnell Pasley you must not have watch the whole video. Yes that’s the water pump leaking. Every water pump job on these engines get a new thermostat at the same time. This is a video on how to locate and change the thermostat. Also in the description and vocally I say it could be the water pump and show in the video how to determine which is causing the leak. Thanks for watching!
@jonathanjimenez9914
@jonathanjimenez9914 Год назад
I did this 3 times it won’t seal right it keeps leaking when I rev high
@andyhamilton3628
@andyhamilton3628 4 месяца назад
I’m having this same issue any luck
Далее
2008 Dodge Charger Thermostat Replacement
10:21
Просмотров 40 тыс.
Whose action is better?🥹 #filaretiki #shorts
01:00
Просмотров 716 тыс.
The last one surprised me! 👀 🎈
00:30
Просмотров 5 млн
2011 Dodge Challenger overheating solved
6:36
Просмотров 86 тыс.
2.7L Chry. V6 coolant leak/bad water pump DIY
3:15
Просмотров 13 тыс.
Dodge Magnum `05 w  2.7l overheat diagnostic
9:18
Просмотров 43 тыс.
05-07 2.7 Dodge Charger Water Pump Replacement
26:52
Просмотров 14 тыс.
Чуть не загорелся 😂
0:57
Просмотров 836 тыс.