Hello Sir thank you for knowledge and expertise on this channel. I have 2008 g35x with the same issue, I tried to program used bcm using a locksmith service and her was unable to do so. The push button is stuck on lock mode with no communication from the car, any word of advice ??
@@BestCarFixes If the bcm is not program to the ecu, would it cause a no communication with the car, if yes. How would you establish communication with the bcm ??? Also I also went and replaced the steering lock module. If I send the car bcm also with the ecu and key; would Eprom programming work ???
Hello sir, just a quick question if you don't mind. Is this the same procedure for a brand new module? Or does a new module news to be configured/ flash before programming keys? Thanks
The first thing that you should do is to take it out and try to Dry it up Then put it back if is not working then look for used one it must be the same number Also remember to Program it after you install it You Need special tools to do the programming like Autel MaximIm im608 Or call a locksmith to do the programming for you Remember to clear the sunroof drainer and under Battery water drainer