Тёмный

40's and 4 Link! One Ton Swap Rear Axle Final Assembly 

Muddy Beards 4X4
Подписаться 58 тыс.
Просмотров 16 тыс.
50% 1

Finally getting the Trail Plug on its on own weight. Finishing up the assembly of the rear Sterling 10.5 axle for the one ton swap. Got the 4 link all bolted up, coilovers installed, rebuilt the rear hubs, and get a set of Powerstop brakes installed.
link to One Ton Swap playlist • XJ One Ton Swap
Get 10% off your Yes Welder purchase and using coupon code “muddybeards”
yeswelder.com/?ref=dVU5yUQ6
Get 10% off your purchase at Barnes4wd with this link or use “muddybeards” at checkout
www.barnes4wd.com/?ApplyPromo...
Check out our website: muddybeards4x4.wixsite.com/my...
Amazon Store: www.amazon.com/shop/muddybear...
Yankum Ropes: yankum.com?afmc=1v
Get 10% off Olight Products, with coupon code “muddybeards4x4” www.olightstore.com/s/8A018Z
Get 12% off the Setpower AJ30/40/50 With the coupon code: “MuddyBeards4X4”
www.setpowerusa.com/discount/...
Tools I Use, MotivXTools: www.motivxtools.com/
10% off coupon code: muddy
DISCLAIMER: Due to factors out of the control of Muddy Beards 4X4, we cannot guarantee against improper use or unauthorized modifications of this information. Muddy Beards 4X4 assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video. Use this information at your own risk. Muddy Beards 4X4 recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Muddy Beards 4X4. Be safe! This video and description contains affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

Авто/Мото

Опубликовано:

 

27 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 50   
@kylancook3477
@kylancook3477 Год назад
Heck yeah!! Been thinking about this build lately, glad you have been able to get some work done on it!
@runningproblem
@runningproblem Год назад
I like the videos. I didn’t document my build in videos. You make a rear 4 link look really achievable for the ‘guy who doesn’t know what they’re doing.’ I appreciate the time you took to explain a lot and document a lot in this build and you seemed to be confident with your decisions and never got angry.
@paulezk
@paulezk Год назад
Great stuff man.. keep the content coming!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks man
@ryanwilson2627
@ryanwilson2627 Год назад
Looking good XJ keep up the good work
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks
@SGTRandyB
@SGTRandyB 8 месяцев назад
I’d make one change from your fantastic build. Let me say first, my son and I are going to build a couple of rear coil setups one day for our XJ’s. This XJ series you’ve made is a fantastic guide of what we’ll need to be ready for, thank you for that. What I’d change, so the frame stiffeners being L shaped, and the two backing plates for your ‘through frame tube’….. I’d have complete the U across the entire section of inner unibody rail instead of two plates. I’ll probably make another cardboard mockup for the top curve and tube holes, then cut it from a large section of And finally I can’t wait to see your rear wheels tucked to help us decide if we should cut quite as much away.
@scottadvevture2022
@scottadvevture2022 Год назад
outstanding brother looks great soon one day i will be there lol thanks for sharing
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
It's just time and money right? Lol
@scottadvevture2022
@scottadvevture2022 Год назад
@@MuddyBeards4X4 so true brother so true
@sixfeetunderfab
@sixfeetunderfab Год назад
yes! Looks awesome!
@cumminsfan6
@cumminsfan6 Год назад
That's so sick. Thanks for Sharing. Can't wait to start my own build.
@bajamedic
@bajamedic Год назад
Really cool build.
@CPPDIYJEEPXJ
@CPPDIYJEEPXJ Год назад
Dang… that is looking good!!!👍
@slowfox89
@slowfox89 Год назад
Keep up the good work. We are still interested in the plug. Takes us working folk a while to get a major project done.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Ya I hear ya
@berger1976
@berger1976 Год назад
Looking good!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks
@glenncolin7038
@glenncolin7038 Год назад
Great work
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Thanks!
@paulezk
@paulezk Год назад
I've heard guys talk smack about the clearance of the sterling, I'd be interested in hearing your thoughts!
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
It's a low hanging piece of iron. I'm sure it will be a rock anchor. I think the strength benefit out weighs the clearance. Besides just got to keep tires on the rocks not the diff lol
@pameladutton9076
@pameladutton9076 Год назад
I've been thinking about the electric e-brake, haven't looked into it, might be something to think about
@travisrscott75
@travisrscott75 9 месяцев назад
It looks great, but why not paint the underside of the body before you did all that?
@Thexkidd
@Thexkidd Год назад
Going to be sweet.
@MacsSpecialitiesMotorsports
Will this be the year were we see both Robby and Kelly on the trail again? 🤔
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
🤣 hopefully
@paulhughes9722
@paulhughes9722 9 месяцев назад
Any updates on the clearance of the tires front and back or a walk around of it after its been on the trails. Like what you would do differently next time kinda stuff
@timbollinger3209
@timbollinger3209 Год назад
So, when you get finished, with this build, what park and or what trail will you be seeking revenge on?
@spencerd76
@spencerd76 Год назад
Why do people mount the heims horizontally?
@runningproblem
@runningproblem Год назад
It makes packaging easier.
@moejr14
@moejr14 5 месяцев назад
How did you obtain the 83” width? What size offset on wheels?
@jamesforler6897
@jamesforler6897 Год назад
Awesome walkthrough! I did have a question? What are your plans for the gas tank?
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Pulled the tank. Going to run stock tank in the back of the rig. Built an enclosure around it. May go fuel cell but either way there is no room for it now
@BSG4x4
@BSG4x4 Год назад
Hey bud, did you have to do anything to service the powerstop brakes, or were the pistons already greased inside? I ended up getting that same kit for my build, just curious if they're good to go or need anything before running them.
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Good to run. I just added a little caliper grease to the sliders and bolted up
@BSG4x4
@BSG4x4 Год назад
@@MuddyBeards4X4 thanks for letting me know
@long-jeep
@long-jeep Год назад
What is the reason for the horizontal orientation of the frame side upper control arm heim joint?
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Being vertical it can accommodate a wider range of upper triangulation. Also packages better with the short "frame" of the XJ
@long-jeep
@long-jeep Год назад
​@@MuddyBeards4X4 thanks for the info 👍🏻
@danharrington386
@danharrington386 7 месяцев назад
Anything new with the trail plug?
@MuddyBeards4X4
@MuddyBeards4X4 7 месяцев назад
Unfortunately no videos. I did get the gears set up in the front axle. I need to gather a few parts and I should be able to install it. Hopefully soon it will be out of the garage
@paulhughes9722
@paulhughes9722 Год назад
How does your diy gas tank still fit with the rear coilover setup?
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
It fits in between just fine. It's actually narrower then the un rails
@paulhughes9722
@paulhughes9722 Год назад
@Muddy Beards 4X4 thank you for getting back to so quickly. I'm starting my 1ton swap this weekend and this will really save me some $$
@autotek7930
@autotek7930 Год назад
What did you use to seal the axle shafts to the hub?
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
There is a seal on the back side of the flange
@autotek7930
@autotek7930 Год назад
@Muddy Beards 4X4 I've always used ultra black or gray silicone coz every surface I've ran across in my repair career had been way less than perfect. I now have my own 2000xj and writing on my 4.7l stroker engine to be built and delivered then I'll be trying my hand and recording videos and doing recoveries with zero experience, I've only fixed stuff in the past but man do I love upgrading my xj lol
@jacksonscooterguy
@jacksonscooterguy Год назад
What wheels are you running?
@MuddyBeards4X4
@MuddyBeards4X4 Год назад
Aluminum bead locks by sidetracked offroad
Далее
Hydro Assist the Easy Way
19:12
Просмотров 160 тыс.
РУБИН - ЗЕНИТ: ВСЕ ГОЛЫ
01:03
Просмотров 178 тыс.
УРА! Я КУПИЛ МЕЧТУ 😃
00:11
Просмотров 865 тыс.
All Jeep XJ's Have This Major Problem!
23:50
Просмотров 769 тыс.
One Ton Axle Swap Beginner’s Guide - Jeep Axle Swap
18:23
4 Link Suspension Explained - Rock Rods Tech
12:16
Просмотров 393 тыс.
Cherokee XJ One Ton Swap - Installing Coilovers
15:16
Просмотров 2,1 тыс.
DIY Weld on High Steer (XJ 1 Ton Swap)
13:10
Просмотров 11 тыс.
РЕЗКА РЕЗИНЫ ДЛЯ ШИН
0:40
Просмотров 7 млн
Civic Modification | #shotrs
0:17
Просмотров 488 тыс.