4L60e to 4L80e Swap - Installing a 4L80e Transmission on a 4X4

Подписаться 58 тыс.

Просмотров 134 тыс.

50% 1

This is the 3rd video in the 4Wd 4L60e to 4L80e Transmission Swap Series. Subscribe now - video 4 coming soon......
OTHER VIDEOS IN THIS SERIES:
4L60e to 4L80e Transmission Swap - What to buy - • 4L60e to 4L80e Transmi...
4L60e to 4L80e Swap - Making the Transmission Crossmember - • 4L60e to 4L80e Swap - ...
4L60e to 4L80e Swap - Installing a 4L80e Transmission on a 4X4 - • 4L60e to 4L80e Swap - ...
4L60e to 4L80e Segment Swap HPTuners - • 4L60e to 4L80e Segment...
LINKS TO EVERYTHING IN THIS VIDEO ........
Kooler Kleen Transmission Cooler Flush amzn.to/34dBMIq
ACDelco D2263C GM Original Equipment Park/Neutral Position amzn.to/37sVodM
4L60e to 4L80e Transmission Plug and Play Adapter Harness LS Swap amzn.to/2XAZMTk
Lokar XTD-3518FM Firewall Mount Transmission Dipstick for GM 4L80E Transmission amzn.to/2OACTLL
Hughes Performance HP4004X SFI Rated Flexplate (Dished) - amzn.to/337q4Od
Bolt Kit for GM Three Bolt Patter Torque Converter amzn.to/34i3fZO
Or if your Torque Converter has 6 bolts get this: ATP Automotive Z-270 Automatic Transmission Flywheel Flex-Plate amzn.to/2reKLKU and this ARP 2307305 Pro Series Torque Converter Bolt amzn.to/2D7Isfp
ACDelco 15724745 GM Original Equipment Transfer Case Adapter amzn.to/2pHvCkZ
32 spline input shaft transfer case (make sure to get the right one for your transfer case) amzn.to/2XCxcB7
ARP 2307305 Pro Series Torque Converter Bolts amzn.to/33cvveW
GM 15765623 COVER, Bellhousing Dust Cover amzn.to/2rkFnFX
HP Tuners M02-008-02 amzn.to/346R95v
6AN 20Ft Universal Braided Oil Fuel Line Hose Stainless Steel Nylon w/10PC Swivel Fitting Hose Ends Adapter Kit amzn.to/34nJwYk
Transmission Depot Inc www.transdepot.net
Circle D www.circledspecialties.com/
Universal Service (Driveshaft Repair) 704-598-7282
4L60e Removal Videos • 4L60-E Transmission Re...
Making AN Hose Fittings for Engine Oil Cooler Install - Chevy Tahoe GM Trucks - • Making AN Hose Fitting...
Did you like this video? If so, please consider becoming a Patreon Member to support this channel. It will help me bring you more videos like this. Here is the Patreon Link: / tahoesteve

Авто/Мото

Опубликовано:

25 дек 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 228

@TahoeSteve 4 года назад

Links to the stuff in this video on Amazon in Description above.

@02maddman 3 года назад

What headers are those?

@TahoeSteve 3 года назад

Speed Engineering

@02maddman 3 года назад

Thanks brother

@brenthall3372 3 года назад

Would this conversion work on my 04 Sierra 4x4

@s10beto55 3 года назад

Did you cut the driveshafts and made them shorter ?

@michaelsanders205 3 года назад

Nice videos man, I've got a 2005 silverado and im debating doing this on, this is the best guide I've found so far on getting it done. Thanks!

@kylechildress26 3 года назад

Thank God I found this series. I have an entire donor 2000 suburban thats ate up with rust in the frame and I was worried about swapping over the 6.0 and 4l80e into a 2000 z71, this just reaffirmed me i was making the right decision.

@TahoeSteve 3 года назад

so glad to be of help

@Dysturbed-00 2 года назад

First of all thank you for your videos which gave me the courage to tackle this operation. Just finished my swap in my stock 5.3L 05 GMC Sierra. Its driving wonderfully with a few small issues to work out. 1. I had a torque converter bolt ticking noise that turned out to be the 4l60 plastic cover interfering with the new 4l80E aluminum inspection cover. (Remove plastic cover and discard) 2. The downstream 02 Sensor both banks giving me a code. (Might be two exhaust leaks, dirty sensors or just bad sensors from banging around) 3. I have an unknown ringing on hard take off almost sounds like the flywheel touching the starter gear. (unsolved inspection cover again maybe?) 4. I had an aluminum drive shaft driveshaft company said they couldn't get a good weld on it and gave me the ol steel shaft if ya know what I mean. I feel like they just wanted to re-sell my aluminum but honestly it was no good to me as is and I have confidence in a steel driveshaft under load. (good scam if ya ask me) 5. My Gear shifter has PRND21 and I cannot shift to the 1 position and I just read the 4l80E has 7 Positions? PRND2 are all functioning fine I just cant physically shift into 1. I bought a trans depot stage 1 btw...

@mrhunter6596 4 года назад

You are doing a much appreciated public service. This is on my list to do if I do not end up buying a 4l80e truck stock. The strength is so much better than the 4l60e.

@TahoeSteve 4 года назад

I appreciate that. This was a HARD mod and there is good info out there, it's just in so many places. Hopefully I was able to consolidate it so you won't have to work as hard.

@DE-ok4ld Год назад

Nice job showing us the pitfalls of a trans swap! Parts needed and etc.

@roytveit Год назад

Hi, great video! I just installed 6.0 and 4l80e to my 2000 Tahoe. I struggled a lot to get the transfer case in. I had to loosen the torsion bar cross member, which gave me 1/2 " more clearance. I also removed the exhaust shield under the car. The only problem I notice after installation, is the tight space for filling the transfer case with oil. Have some minor work left before I can add oils and flash the ecm.

@808kahulaa 5 месяцев назад

thank you for the lessons learned, work stoppage items. I plan to make this swap as well and these little things are the killers

@bobbiecuster5188 3 года назад

Well done sir. Very good detail. And hit on very good key points. When I do my swap will be using this video as reference. Thank you

@TahoeSteve 3 года назад

Awesome, thank you for taking the time to comment. Good luck with your swap!

@turtlederp7410 2 года назад

I absolutely admire and congratulate you on keeping going with this, as well as helping others with things to expect and not giving up! There’s been so many times I’ve just wanted to sell my project but these help a ton man! I appreciate it!

@TheJeffe613 2 года назад

The part where you show all the bolt bins is funny as hell. Said he was tired of going to the store😂😂😂 That is a good movie though

@IEraiderfan 4 года назад

A good video thank you for sharing Steve.👍👍👍

@TahoeSteve 4 года назад

Thanks, Lou!

@ericwyman-cp5ke Год назад

Great informationTHANKS!! And love the flex plate sarcasm

@rodgarcia6563 3 года назад

Doing a similar project soon. Your videos are much appreciated 🍻

@TahoeSteve 3 года назад

Glad they helped!

@DakGeorge 4 года назад

Just got a 01 4x4 tahoe, perfect time to find your channel 👍

@TahoeSteve 4 года назад

Congrats! Keep us posted on your mods.

@EndlessWishlist 4 года назад

Very good video. I think you just convinced me to do a 80e swap in my truck.

@TahoeSteve 4 года назад

SO worth it. Just from a peace of mind standpoint.

@tracyjames2193 3 года назад

Thanks for sharing bud much appreciated

@TahoeSteve 3 года назад

Any time!

@clydeshelton6533 3 года назад

I live the video!! Badass video buddy!!!

@TahoeSteve 3 года назад

Glad you liked it!!

@JesMagna 2 года назад

Great video man

@jacksmith3189 4 года назад

Good information Thanks

@TahoeSteve 4 года назад

Glad to be of help.

@19Clutch69 2 года назад

Thank you for doing this

@christopheringleton6971 3 года назад

That's how you make a video!!! Fucken sweet. Thanks

@jamesedwards45 3 года назад

Outstanding video. The part numbers for needed adapters was a great time saver. I saw that your drive shafts fit but was unsure if you had to change the length.

@TahoeSteve 3 года назад

yeah, i did change the length of the rear and bought a new front. it's been a while since i did this video, so i don't remember the specifics, but i know that in the first video of this series, I went into detail about exactly what i did. video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4MhOLgqVaPo.html

@FirstLast-tx3yj 2 года назад

@@TahoeSteve does the 4l80 come from the factory with a transfer case?? I have seen drag cars with insane power but i am not sure which transfer case are they running with the 4l80 Is this the one that can be switched to rwd and 4x4 with a button?

@hitmanshadowrecon9017 2 года назад

Hey Steve. First of all great video. I started my 2000 suburban 4l80e swap a few months back. I have it basically finished except a mechanic recently told me my front driveshaft is too short. Do you think that front driveshaft you showed will fit the suburban? It has a 5.3 and 4l80e.

@etftransam 3 года назад

A suggestion on the transmission fluid fittings.... banjo fittings will fit closer to the transmission and not stick out as much... probably needed more for a car than a truck

@CyberdriveAutomotive 3 года назад

The fire sleeve for the trans lines is also a good idea because transmission fluid is the most flammable liquid in your car asides from gasoline

@TahoeSteve 3 года назад

agreed

@djbiggz7960 4 года назад

Great video

@TahoeSteve 4 года назад

Thanks!

@markb4448 3 года назад

Wanted to Thank you for all your hard work on these videos I used them for doing my swap in my 2002 Avalanche. Getting the rear driveshaft cut right now and we are done.

@saifalkaabi9121 3 года назад

I have the same car, please tell me if you notice any difference.

@Adamz678 3 года назад

What helps is to have the transfer case in neutral so you don't have to worry about the splines and holes lining up, just get it on the output shaft then turn the tcase to line up the holes.

@TahoeSteve 3 года назад

Thanks for sharing this.

@aaronmcdonald8423 Год назад

This is awesome stuff brother. I just found out today my 04 Tahoe with 4l60e needs a converter and I decided to have a shop do it as I don't have the time or location to do it myself.....(my driveway is a gravel parking lot).... however when I restore this vehicle properly its getting an 80e! Ill 100% follow the steps you took when I do it. How do you like the 80e swap so far? Been holding up good?

@johnsonjeremiah74 4 года назад

Yes the 2wd needs both speed sensors. The one i found at the junk yard has both sensors, but not harness. Ill use the one from the pcm in the front and get a pigtail from the dealer on the rear. Ill just crimp the 2 wires together

@TahoeSteve 4 года назад

thanks

@michealvest4524 Год назад

You happen to have the measurement on the rear driveshaft im in the middle of doing the swap myself in a 04 Chevy Tahoe 4x4 I used my stock transfer case just changed the output shaft to the 4L80E splines and my driveshaft is to long

@TYguy6090 3 года назад

I’m looking to do this and wondering if I can pull the whole driveline from a 2500 and just swap for example just take the flywheel transfer case and driveshaft and just buy the harness

@orabates1823 3 года назад

When you connected the wiring harness that you got from Michigan MotorSports. How did you hook it up I have the same wiring harness but it did not come with any instructions. I would assume that you take the big plug And plug it in between the original wiring harness and the transmission. Then run the speed sensor wire up to your PCM

@abutler0311 2 года назад

Did you have to change the transmission spline to fit transfer case?

@jacobhurn7828 2 года назад

do you have to get a new torque converter, or can you have your stock 4l80 converter built accommodated for your truck?

@slaskey 2 года назад

I'm wondering how you got your transmission linkage to hook up

@deweyjump698 3 года назад

Been swapping Denali 60e to 80 e for 3 days you just saved me alot of stress....

@mmasinator 3 года назад

How did that go. I’m looking to swap my Denali as well.

@deweyjump698 3 года назад

I'll be honest my DENASTY is my baby and I'm dragging my feet I want to get it right the ole moter will run just want to be smart about wat I'm doing

@TahoeSteve 3 года назад

update?

@kalikiller1771 Год назад

Did you have to buy or modify your starter with the dished flex plate?

@kennethvincent4663 Год назад

Hey Steve great video , have a ? Maybe you can help me out, I have a humvee with a 4l60 . Just purchased a 4l80e with the transfer case , also purchased the tci transmission controller.what do I do with the speed sensor ? My speedometer is mechanical

@Leakstop247 2 года назад

Silly question.. did you have to swap out the TCU (Transmission control unit) and if so.. where is the TCU located on the vehicle, thanks

@sr20geek 4 года назад

"The hell i be !" lmao

@TahoeSteve 4 года назад

thanks for watching.

@briankinzer4175 6 месяцев назад

So if you buy the harness adapter is that all that’s needed to make the 4l80 work I watched another video where the guy had to re tune the computer to make it shift like it was supposed to

@Kyle-ev4fk Год назад

Was it necessary to use the fancy dipstick and trans lines or can you use stock 4l80e stuff?

@fastlsx3463 Год назад

What input shaft was used in the transfer case?

@Gulembo18 4 месяца назад

Hello! Can you tell me more about the transmission temp sensor.

@ClearViewSolutionsMS Год назад

No modifications to the drive shafts?

@hondaservicecenter 5 месяцев назад

Damn bro ur crazy lolz, after you have 2 or 3 bolts in just lower the trans jack, will give plenty of space up top, impact swivel best friend

@colonialroofingofnorthcaro441 Год назад

Which line went to the radiator, the front line on the transmission goes to the top or the bottom, and the back transmission connection goes to the bottom or top of the transmission, I just can't find which hook up go where, and I don't want the supply lines running backwards, thank you

@spyderlyf3 4 года назад

2wd uses both speed sensors depending on how the trans is tuned. Did the same swap into my tahoe and painted my engine and crossmember the same color lol.. luckily I'm 2wd..

@TahoeSteve 4 года назад

Thanks for your comment. At times, I wish I had 2wd too. Getting that transfer case in there with the added length of the 4L80e was probably the most stressful part of the swap.

@michaelhoman8668 3 года назад

What did you do with the drive shaft on your 2wd?

@spyderlyf3 3 года назад

@@michaelhoman8668 I changed out the yoke with one for a 4l80 and used a hybrid ujoint to connect to my original drivesshaft. I've run it up to 130mph with no problems. If I add more power I'll swap it for a custom shaft. Currently just a cammed 6ltr.

@matthewattaway6645 2 года назад

Do you happen to know if the shifter cable bracket is the same for the 2008 Silverado with the same swap, I had to mod the factory 4l80 bracket and can’t get it back into park after going into first, any help would be thankful

@dontlolme234567 2 года назад

What headers are you running? Do they have cats in them?

@Headsup9550 Год назад

So what rear driveshaft did you use?

@forcedtomakeanaccount7628 3 года назад

Great video man wanna try this on my suburban would you know how to wire the VSS on a 08+ pcm? They use a different style connector

@TahoeSteve 3 года назад

I dont. Perhaps someone will chime in

@SM-zn6uw Месяц назад

You use the same shafts that came with it or did you have to upgrade on it?

@T.E.G_VR Год назад

My 4l60e output shaft is smaller than the output shaft on my newer 4l80e, so did you change yours to fit in tranfer case?

@FFMotorsports22 3 месяца назад

So are you not able to use a 4l80e transfer case ? To avoid having to get that adapter

@MysteriousSystems 2 года назад

great videos steve, subscribed! great information, i do have a question though im looking for what my options are from someone who has done the swap. so i am looking to swap my 06 silverados 60e to a 80e, but my truck has the manual 4x4 transfer case (the floor lever) so if i was to swap the input gear and get that transfercase adapter, would it still work? will the transfercase be in the same location on the truck as the 4l60e? or would it be too far back with the 4l80e and i would have to figure something else out? would a 2500 manual transfer case work if the original wouldnt? thanks again steve and thank you for the information, and have a great day man! btw you have a new subscriber!

@Exolityy 2 года назад

any results

@frankdatank7751 4 года назад

Awesome truck!!! Did you use 1" setback plates, and did you have to cut the driveshaft for the 4l80e to fit, im in the process of installing a 4l80e, Thanks!!

@chrisgarcia5394 2 года назад

did you have to?

@reylyrrad8463 4 года назад

Going to be doing this on my 96 z71 on my 5th 60e an im over it

@TahoeSteve 4 года назад

I get that. Best of luck with yours!

@rylandallas9907 Год назад

Nice video, did the hp tuner have the trans already pre programmed or did you order it from them?

@TahoeSteve Год назад

Had to find a tune online

@billybeshea1160 9 месяцев назад

What headers are u using are they 3” ? Do u have a part number

@DaddyNashville 3 месяца назад

Having a really hard time finding a used late model 4l80e. I want to buy it used and have a local shop rebuild it. Any ideas where I can get a 2011-2013 4L80e???

@tonyburts7998 2 года назад

@Tahoe Steve, Do you have the part number of the cats that you installed onto the long tubes and I'm assuming that you had to modify the y-pipe?

@TahoeSteve 2 года назад

I dont, sorry. Yes i cut then welded them straight in.

@reece8355 3 года назад

I feel u

@TahoeSteve 3 года назад

Word

@jammy46235 2 года назад

Will the 4l80 e flex plate work on a 4l60 e

@jonathanurbina4427 4 года назад

Hello @Tahoe Steve. Love my z71 2003 and starter to have problems with the 4l60. How much did you spend total for the swap. Huge thanks for the video.

@TahoeSteve 3 года назад

I really don't want to think about it but I will take a swing at this off the top of my head: $2300 trans $800 Circle D 3000-3200 Torque Converter with Billet, $100+ for the wire harness, $100+ for the flexplate $100+ for the front drive shaft $100 to have rear drive shaft shortened $50 trans cooler lines Crossmember - Free (but I already owned a welder) I already had HP Tuners to do the swap, but this needs to be considered in your budget to either buy it, or have someone do the segment swap for you. $100+ ??? NSS, Transfercase adapter, bolts, gaskets, dipstick tube And don't forget how expensive all that ATF is.

@shermangore3721 3 года назад

Link to what headers you have please and much appreciated love your videos

@TahoeSteve 3 года назад

Thanks so much. Link for headers: amzn.to/2FENO1n

@tonyvickers8659 3 года назад

The front speed sensor in the transmission is not the vehicle speed sensor, it's the trans turbine speed sensor. The second one is the vehicle speed sensor. And it's only used only if the trans is set up to be used as 2WD. If the trans is set up to be used as a 4x4, the rear sensor is not used. A 4x4 input for speed is taken from the transfer case, not the transmission. Otherwise, your speed would be way off when you put the truck in four low and the transmission would not shift correctly.

@TahoeSteve 3 года назад

thanks!

@trevorjarvis3050 4 года назад

Subscribed! Just want to send a big thank you for doing most of the leg work on my project. I’ve been thru 3 4l60e transmissions in my 2000 Z71, changing them out flat on my back on the concrete. If I buy the trans from that place in Florida and tell them I want the same setup you have, will they know what I’m talking about? I’m not making as much HP as you and have stock exhaust. Do you think I will have enough clearance using the stock 5.3 exhaust manifolds? Looking forward to seeing this running and if all electrical and computer concerns are taken care of. The part numbers and vendors, showing the glitches that undoubtedly arise, are so appreciated.

@TahoeSteve 4 года назад

Thank you so much for your kind words. If you call them, ask for Danny or Misty and tell them you saw it on Tahoe Steve's RU-vid channel and they'll know. They have been nothing but helpful and awesome throughout this entire process. As far as the stock 5.3 exhaust manifolds, I can't comment from personal experience as I have long tube headers, but I'm sure it's a pretty safe bet. At worst, you might have to cut off the "ears" on the transmission.

@markholcomb3724 3 года назад

Thanks for this video series. How do you like it after a year?

@TahoeSteve 3 года назад

Can't put it into words. Being able to stomp on the gas without cringing (waiting for it to break like i did with the 60e) is amazing. The peace of mind alone makes the swap worthwhile.

@chrisgarcia5394 2 года назад

hey what front and rear drive shaft

@dezford5408 3 года назад

Great video, only comment I would have is I noticed no washers on the neutral safety switch bolts.

@rserna801 4 года назад

What did the swap cost total?

@perryburkhart4850 3 года назад

The only easy way to instal that transfer case is to lift it by hand, its only 80lbs and that torsion bar crossmember gets in the way of using a jack

@domhammer1289 4 года назад

wheres the video for wiring up the other speed sensor, neutral safety switch, and the other trans case wires?

@TahoeSteve 4 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-21LpCdqKyH4.html

@williamwaters5029 4 года назад

Just did this on my 04 Silverado. I'm trying to use the 243 tho so I'm not rolling yet. Plus my speed sensor ain't workn.

@TahoeSteve 4 года назад

Hope you get it fixed up.

@Truckingforlife323 3 года назад

For the cooling lines did you connect them straight to the radiator or did you connect them to a cooler?

@TahoeSteve 3 года назад

I have an aftermarket radiator with a trans cooler, and then i routed them to an additional external cooler.

@foryouuugamingcoalition7110 4 года назад

Does no one make a crossmember for a squarebody 4x4 for a 4L60 swap? I have a tahoe with 5.7 vortec 4l60e and i was thinking about yanking it all out and putting it in my blazer since the engine will bolt right up from my understanding...

@aaronautry1981 2 года назад

I have a 2001 trailblazer s10 style and the engine needs rebuilt and I want to switch it from tbi to carbed plus swap the old 4l60e with 4l80 for better power and torque and smoother shifting. I think it would really help last longer with having less strain and wear and tear on the 4l80 than 4l60 and it would be easier on the engine to save fuel and require less effort to get up to higher speeds on interstate plus it would help a lot with the 4x4

@FFMotorsports22 4 месяца назад

Sooo you used a 4l80e transmission with a 4l60e transfer case ?

@orabates1823 3 года назад

When you modified the crossmember with the angle iron. Did you have any clearance issues with the transmission pan ? The reason that I asked is that I`m doing the same thing only with a Suburban 4WD

@TahoeSteve 3 года назад

I did not. I also have aftermarket exhaust with a Y pipe and V bands. It was the Y pipe that makes getting to the trans pan a major challenge. Not anymore.

@user-qv8bi3ts5c 8 месяцев назад

Can you just take the transfer case out and delete the 4x4 without changing the fly wheel to the trans ? Original drive shaft as well. Id like to know cause 4x4 ain’t my style nor do I care to drive it in 4x4

@BlackOpsGarage 3 месяца назад

isnt that pan and transmission brand new? From Transmission Depot? if so why the hell is it leaking?

@skylerwright4149 3 года назад

What was the cost think of doing it

@christophernation8593 4 года назад

Whats the place and part number and number for the adapter plate for the transfer case ... thanks for your info

@TahoeSteve 4 года назад

Please see description as I dont remember off hand.

@andreatorres9292 2 года назад

what motor is that and what kinda of truck

@josebarajas5145 4 года назад

Thanks for the informative video, I am thinking about upgrading to 4L80E in my Silverado SS because my 6.0L already broke my stock trans. High Performance mods coming in the near future. Thanks

@TahoeSteve 4 года назад

glad to be of assistance.

@alaverga173 Год назад

I thought the Silverado ss came with the lq9 with 4l80e

@cwg56074 2 года назад

Idk if you’ll see this because this video is 2 years old but was it worth it? Debating on doing this to my 05 tahoe

@chrisgarcia5394 Год назад

what’d you need for the transfer case to fit into the trans with the 32 spline

@Snow-qz8xc Год назад

you need an output shaft that matches the spline

@dragonfires01 3 года назад

wondering why you didnt marry the transmission and transfercase befor liftimg into place.....it ccan be done using 2 jacks...trans jack on the trans and a reg jack on the transfer case

@TahoeSteve 3 года назад

That's definitely a good idea if you have a "real" transmission jack that tilts. The one I used was barely enough to do the job as I did it.

@zackarychaseeubanks2162 3 года назад

So I used the flex plate from my 2000 3/4 ton on my 1500. What size flex plate spacer do I need? I wasnt certain. Thank you in advance.

@TahoeSteve 3 года назад

I reused my dished flexplate from my 60e so I am not sure. Hopefully, someone will chime in.

@josephwatkins9605 3 года назад

How do you like that harbor freight trans hack? I have the same one and it's a pain in the ass to lift the trans with it. I used a lonh 3/4 rachet and it was a pita

@TahoeSteve 3 года назад

I don't like it at all. I should have sprung for a nice trans jack but I have absolutely zero room in my garage to store one.

@benjamingifford2823 3 года назад

So how much did it cost total?

@shadowopsairman1583 3 года назад

Id like to see a 6L90 or 8L90 MQE,or 10L90 in a gmt800 silverado

@TahoeSteve 3 года назад

that would be interesting!

@frbrbrgrblgrr7777 2 года назад

I'm just going to say it. If someone got upset you didn't show them how to put the bolts into the TC then they shouldn't be doing this job because that is simple as hell and you can easily look it up online. It's a one man job, nothing wrong with 2 guys doing it but it's very easily a one man job. Anyways, this is an old video and you did a great job

@cameracamera1319 Год назад

"All of these" and "all of those" boxes my brother and dad make fun of me for wasting money. My 7 children love me bc of my boxes and boxes of "all of these" and "all of those". My children appreciate me and and use those boxes and can have them when im dead.

@thesetruths1404 24 дня назад

Nice video. Would you do anything differently if you did it again? I have a 05 4x4 Yukon 5.3L. 233,000 miles. Looking to get a used cheap broken 4L60/65/70 to rebuild with my teen as a DIY learning project. To have ready. I found a used one for $60, with nothing but Reverse working. Thanks!

@TahoeSteve 24 дня назад

I don't think so

@mileswatkins6472 4 года назад

Did you have any issues with the encorder motor wiring

@TahoeSteve 4 года назад

i did not

@sleepernation 3 года назад

Taho Steve Did you have to change the output shafts before installing the adapter plate for the Transfer case

@TahoeSteve 3 года назад

Normally you do, however, my transmission builder set me up so I did not have to do it.

@sleepernation 3 года назад

@@TahoeSteve nice. Thanks for the videos im doing this in my 07 silverado 1500 4x4. I almost have all my parts lined up. Have A Dank Day

@superior3384 4 года назад

Hey Steve I've been watching you for a while now. And I never noticed that you redid your transmission twice. Question is it possible to build a 4l60 to high torque and high horsepower ratings? Or will I have to 4l80 my Tahoe?

@TahoeSteve 4 года назад

First, thanks for watching! I can only speak from my personal experience. I started adding HP and blew my stock 4L60e. I had the 4L60e rebuilt by a professional shop with the following goodies: * z-Pack 3-4 clutches * Corvette Servo * Beast Sun Shell * 500 boost valve * B&M Shift Kit * Hughes Torque Converter..... And then I blew it again inside 2 years and I am only making mid 300's at present. I'm going turbo, and thus, the 4L80e. But if I (instead) had the 4L60e rebuilt again (and was not going turbo), I would be on pins and needles waiting for it to let go again. Hope this helps.

@pmotorsports8276 4 года назад

4L80E, you can build the 4L60E up. But by design it'll get 1/2 the miles as 4L80E. 4L60E shares 1/2, 3/4 clutches. Everything gets used twice. 4L80E only shares 3 and reverse.

@superior3384 4 года назад

@@pmotorsports8276 ... Wow I did not know that. Thank you. Now I'm thinking if I should camm heads when rebuilding my 5.3 or should I stroke it to 383. More power is best in my opinion. But I was consearned about the transmission not being able to handle the power. I love your channel because you did and are doing what I want done on my Tahoe.