English subtitles are available. This is a complete build of Dragon M4A1 DV Sherman in 1/35 scale. This is truly a complete build where you get to see the construction, painting, and weathering of this kit. Enjoy.
By the way, i did introduce my son to modeling at about age 11, and he took to it like a fish to water almost right away. He is 24 now, and a very good modeler. Something he and I still enjoy doing together. Building planes, which I built a lot of inspired me to go on and become a commercial pilot. Retired now, but it's amazing how things begin. Always remember, you can do anything you put your mind too! Somehow, I think you probably already know that and are going to do just fine in life. All the best!
Here's how I avoid "silvering" I simply use a makeup sponge to press the air out. ONLY go straight in and back out. Perpendicular to the surface. As for the ones already on your model, you need to use the tip of your #11 blade to poke a few holes. Tap the decal over most of the surface and let the trapped air out. Then apply the Micro Set and Sol. Repeat as required. Since you didn't mention it, I wasn't sure if you knew this "ancient" modeling technique. Great job on this Sherman !
Wow the build seemed so smooth and fun! I'd just love to build this kit just to admire the great engineering Dragon Models has put into making the parts. In the end, the kit looked awesome! I like what you did with it!
Beautiful model.. :)The etched brass adds some realistic detail, and as usual the paintwork is outstanding. I really like the subtle weathering as well!! :) Brilliant stuff.. and above all, it is a SHERMAN! YOWSA.. Me happy.. :)
Noticed new technique for tracks. Absolutely love how they looked! Keep up the amazing work. I was also wondering if at some point you could do an M8 Greyhound model or another ship like a destroyer. Just a request, but build whatever you please, cause I always enjoy watching and learning!
The detail of the raw plastic is amazing for this model company, the ripple effect of the cast iron wow. You have done a superb job building and the painting and effects, I wish I was at this level great job, brilliant.
I usually do a shiny clear coat over the place the decals will be placed. Never had a problem since I do so. Great work, I like the mostly clean look you give to the models. Some times the weathering is overdone and unrealistic.
+GroovyDrifter Thanks. Another viewer suggested that the rough cast molding texture of the tank is to blame. It traps air bubbles that caused the silvering. I like the slightly worn look of my tank as well. When I look at historical photographs of real Sherman tanks, the majority of them in combat doesn't look so worn out as most model kit builders portray them as. Thanks again and have a great day!
QD You did a great job as always! And I must say you are getting better and better with each model! I especially like the dirth and the tracks look. Keep ap da good job! :)
If the decals are really annoying I would suggest adding wood planks, sand bags, personal belongings and or scrap metal, giving the appearance of the tank as experienced and has been involved in war longer than most, covering up most of the decal with ease. Also congratulations on another exceptional build.
Another excellent build!! I have a question though, you seem to always perform a "Pin Wash" what does that mean exactly and what effects do you hope to get from it?
+John Jacobs There are two popular washes. "Pin Wash" generally means to darken certain areas of your model with the dark fluid. The pro is that it preserves the overall color of your model. However, the term "wash" means to apply the fluid all over the model. This darkens the entire model with that tint. Using either one is fine. It just what you like. Take care.
Awesome tank! You should try building the Trumpeter 1/350 scale, Kuznetsov aircraft carrier. I have wanted to build one myself but I don't have the time for such a project.
+Lee78072 Photo etched parts can be tricky. For me, I learned that if I take my time, I can do most PE without a problem but I agree it can be very difficult.
QDC, how was the build on the Strata-fortress, do you recommend that kit? Really like your channel. I'm 57 years old nd If my son had done what your doing at your age I can tell you I would have been VERY proud! You seem like fine young man. I have been building since my Dad introduced me to models at a very young age, as he was building them and hanging in my brother and I's room. I was under 4 years old but I remember it vividly. He, as I recall was VERY good. Keep it up young man, your doing great work.
Another nice build QDC. I like the way you've put your RU-vid clips together. I believe that silvering of the decals is caused by small amounts of air getting trapped under the decal. The microsol should have helped the decal conform to the model so I was surprised it hadn't worked out. Do you think the cast moulding may have helped cause the silvering on this model by trapping some air in the fine detail?
Oh, forgot to mention in the previous comment. You can thin your paint with future floor wax. You wont have to add a clear coat when you use a wash or add pin lines. I do it all the time, works great.
very nice video... as always simple... clear... and easy to follow As an ace combat fan... would you please think of a video about the su47 grabacr squadron from hasegawa... please A french channel fan
Very nice! How much does this kit retail for? Also, in your videos, you always dry fit all parts when showing us the build-through. Does it ever get annoying to basically build the tank twice: First getting a video shot of your dry-fitting a part, then actually glueing it on?
+Papaben I don't really measure it per se. I like the tint to be fairly translucent to the consistency of black coffee. I also added a little bit of white in it too.
Back to your classic armour loved ones..., dear Qdc! Anyway, it looks great for a greater IIWW dio, isn't it? Maybe it could be based on an Operation Market garden scenario... What do you think?
+nino cammarota I think this tank would be great for a diorama. Right now, I'm still a little tired of making dioramas but I plan to do at least one this year. Thanks :)
+Taylor Baca Don't be jealous. It takes time and practice. With time, I'm sure you will get your models look the way you want it. But in the meantime, just enjoy it. Take care :)