Creality CR-10 mini 3D printer - full review

Подписаться 107 тыс.

Просмотров 39 тыс.

50% 1

Hi Guys! Check my FULL REVIEW of Creality CR10 mini 3D printer! Video includes: Unboxing, assembling, hardware overview, time laps printing, heat-bed testing, thermal camera view, detailed look at test prints and closer look at inside components. To order this 3D printer or other CR10 3D printers check links below.
FROM BANGGOOD
Creality3D CR10 Mini -- goo.gl/gjjcSo
Creality3D Ender 2 -- goo.gl/yCVWDV
Popular Online retailers:
Amazon.com - amzn.to/3k08g0K
Amazon.ca - amzn.to/3c3efiJ
Amazon.de - amzn.to/3rnvj9l
Amazon.co.uk - amzn.to/3blB2qY
Amazon.se - amzn.to/3bhU55l
Aliexpress - bit.ly/2GWF50w
Banggood - bit.ly/2T0R8fG
Ebay - ebay.us/OJuoTs
Cheap filament for 3D printer:
PLA filament for 3D printer
On Amazon - amzn.to/2K6U99U
On Banggood - bit.ly/2pZSiwK
PETG filament for 3D printer
On Amazon - amzn.to/36RHEsz
on Aliexpress - goo.gl/8Cfsrb
ABS Filament for 3D printer
On Amazon - amzn.to/2K5S4LH
On Banggood - bit.ly/2CurLuc
Thermal Camera from video - goo.gl/jStGbp
3D printer parts and accessories:
Heat bed mosfet module -- goo.gl/91i7bQ
Sticker: goo.gl/WTmmiM
Glass: goo.gl/3GqP6Z
BueTape: goo.gl/7vQMYp
Switch for PSU goo.gl/sKzzkg
Rubber Timing Belt goo.gl/3xtQPv
SCS8UU-8mm-Linear-Ball-Bearing goo.gl/88pgGV
Gear that I use for my videos:
www.nexi-tech.com/gear-that-i-...
You like what I do? Support me on Patreon
/ nexi_tech
I put a lot of effort and time in my videos and I would appreciate if you click on the ''Like'' and ''subscribe'' button.
Thank you so much for your support.
Best Regards!
Nexi
Prints in video:
THE SORCERESS cults3d.com/en/art/the-sorceress
www.thingiverse.com/thing:200...
www.thingiverse.com/thing:191...
www.thingiverse.com/thing:124175
Ambient song in video:
Envato Market
Licensor's Author Username:
FreeHands
Licensee:
NexiTech
Item Title:
Kyushu Sunset

Наука

Опубликовано:

3 янв 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 125

@NexiTech 6 лет назад

Guys! I made video how to upgrade heat-bead of every model of CR10 3D printers. With this upgrade heat-bed can go to 135C under 4 minutes! Printing ABS is not a problem no more! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IhjqfMHyBAI.html

@robertocspinto 5 лет назад

I print with ABS with hotbed at 109C without problem with my Anet A8 - Prusa I3. I use a Koptan tape directly over aluminium hotbed without glass plate. But I've changed power supply to a new 350W, installed two mosfets to connect to struder and hotbed and changed hotbed cables too.

@nimnieden1754 6 лет назад

Gotta say, that's the best review of any printer I've seen, not bullshit crap talking, nice 3d models examples, noise test, assembling, all of it is perfect, thank you!

@NexiTech 6 лет назад

Shinrin Yoku Thank you so much mate! Feel free to check my other videos as well. Cheers!

@4cpus4me 5 лет назад

Plus, no whining about having to remove the bed to carefully adjust the 6 rollers like some of the other reviewers do. Just does it, moves on like a pro.

@danielsabag5294 5 лет назад

another great, clear, detailed and comprehensive review . thank you Nexi

@BrunoPOWEEER 6 лет назад

Your video INTRO packs so much POWEEEEEERRR haha Nice instructional/review video, very complete with a lot of good and relevant info!!! AWESOME prints... the details is just mind blowing... honestly, I didn't know these little 3D printer could do such a good job WOOWW... Nice the thermal imaging showing the heat starting from the right hand side and spreading out.... Ohh yeaahh =]

@newz2u158 6 лет назад

Thanks for the great review! Im about to buy a mini from a fairly local shop I found close to me so I can save on shipping and wait time. Thanks for being so detailed in your settings for these prints!

@NexiTech 6 лет назад

You welcome mate! Thanks for stopping by! Good luck with you CR10 mini! Cheers :)

@spacetigers1596 4 года назад

Newz2U where did you get it from

@johnbasterson7938 4 года назад

Your skill level is extreme. You sold me on this for my first printer. I'm very limited on space and do not want a tiny cabinet model.

@KieranMeadows 4 года назад

Thank you for the time and the great explination. Very best to you!

@prg212 4 года назад

This review it's amazing you know how to explain everything on the easy way. I only have a question at today may of 2020 you still recommend this Cr-10 mini? Or it's better the ender 3 and ender 3 pro series?

@theothertroll 6 лет назад

Very good review video - succinct and to the point ~

@giova21111 6 лет назад

compliment.. your review is very complete, with many tests, and good info (temp, time of print, etc..)

@iGameOvertv 6 лет назад

Love your videos man! Such a good job! 😀

@NexiTech 6 лет назад

Thank you! :)

@tropicalwargaming688 6 лет назад

Man, you really know how to calculate the settings before printing. Other youtubers tried to print at maximum speed and they got not so good results.

@batulaut 6 лет назад

I should have bought this as my first 3D printer. Very nice quality print out of the box!

@NexiTech 6 лет назад

Saiful Hamdan I agree :)

@AlexanderSauerPlaysWithHeroJr 4 года назад

Thank you. Just the vid is was looking for.

@kiwiforever3604 6 лет назад

Hi Nexi, You do a grand presentation of the various printers. It has helped me much in my printer purchase. I would appreciate if you could demonstrate the easiest method in changing the filament in the bowden sytems, meaning ones that dont have auto features to assist. Thank you.

@NexiTech 6 лет назад

My friend that is very easy. First heat up the nozzle to 175C (if you using PLA) And then you press and hold Filament realise on bowden extruder with the fingers and then push in filament a little and then just pull the filament back with the fingers out the teflon tube.

@kiwiforever3604 6 лет назад

Hi Nexi, Thank you for the reply, You have been most helpful.

@rmactvc 5 лет назад

Great review, I think you have helped me make my decision to buy a mini. What is the blue filament you used?

@NexiTech 5 лет назад

Thanks :) It's called PURE. Here is the video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qRVtPFmuAc0.html

@JAYTEEAU 6 лет назад

Thanks Nexi, great review. Cheers, JAYTEE

@NexiTech 6 лет назад

JAYTEE Thank you mate. Cheers! Nexi

@TheComputerBase 6 лет назад

Which software you use for cr10 mini and settings?

@vincimarino 6 лет назад

Hi, do you have to make al the regular CR10 upgrades on this printer? Or not? Thx

@BitmapValley 4 года назад

What was the blue filament that you said was similar to wood filament?

@eliavedri7876 4 года назад

I am in the market for a 3D printer, I came to your channel and was very impressed, you seem to know what you are talking about, I am looking for a 3D printer in your opinion what will be a better option the cr-10s or the mini? The print size is less important to me ..

@oshanericketts9438 6 лет назад

Love it man.

@NexiTech 6 лет назад

OSHANE RICKETTS Thanks man :)

@ahmedshaikh7662 6 лет назад

Damn. Now I really want it. Its either this or saving for the htc vive. Damn it. Great review.

@osley8296 6 лет назад

Nice vidéo ! Can you upload the ff profile of the mobile stand ?

@Hasitier 6 лет назад

What’s that blue filament used in the video? Looks nice

@aldebaranflash2663 5 лет назад

Good job!

@NexiTech 5 лет назад

Aldebaran Flash Thanks :)

@phatpanda3805 6 лет назад

Love the vids bro, do you have experience with laser engravers. Any best bang for buck recommendations. I know some people change attachment on their 3d printers to the laser and use that as the engraver. I've ordered the larger 10s model. Can't wait =)

@NexiTech 6 лет назад

Hi mate! Feel free to look my other videos I already did review for Laser Engraver (Powerful 5.5W). Nice! Good luck with your 3D printer! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-I5elJpaq2qo.html

@aki_deratzu 6 лет назад

Can you do a review of the anet a3.

@jasmenevans972 2 года назад

Where can you get different nozzles for it

@neojeets 6 лет назад

Thanks for the review. How well does it do TPU prints?

@NexiTech 6 лет назад

neo Jeets You welcome. Yes, It can print flexible Filaments but you need to keep it in low speed like 20mm/s as this 3D printer have bowden style extruder.

@neojeets 6 лет назад

I see, thanks again!

@matriawan7664 6 лет назад

is there cr10 mini upgrade version like cr10s ?

@mrclown7469 6 лет назад

Would this be a better option for ABS than the full size CR10? IIRC the bed on the full size didn't heat evenly, and/or high enough because of the huge bed, but the mini seems to heat evenly and to very good temp because of the smaller bed (@ 13:37 )

@twinturbostang 6 лет назад

I had the same question! Hopefully Nexi Tech responds.

@NexiTech 6 лет назад

Yes, CR10-mini is better for printing ABS then full size CR10 or CR10S. Even if you apply insulating under Heatbed CR10-mini will reach higher temps(faster too) comparing to regular CR10 or CR10S.

@twinturbostang 6 лет назад

Cool. Thanks!

@lukegubler9455 6 лет назад

Can you do a review on the tevo tornado?

@NexiTech 6 лет назад

Luke Gubler You have review of Tornado already on my channel. Feel free to look in my videos. Cheers!

@tociyes 5 лет назад

Nice review mate.. What type of filament is at 9:50?

@NexiTech 5 лет назад

ElmzXXL FPV Thanks mate! It's this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qRVtPFmuAc0.html

@vincimarino 6 лет назад

Hi, could you change the jerk acceleration? Do you think it is needed?

@NexiTech 6 лет назад

Santiago Alejandro Vinci Marino You can over-ride Acceleration or Jerk in Firmware or in Cura settings but honestly it's no needed.

@Aranel71 4 года назад

hello, can you share the profile frames dimensions?

@twinturbostang 6 лет назад

What slicing software would you recommend for the CR-10 mini?

@NexiTech 6 лет назад

twinturbostang Cura.

@TheDrewker 4 года назад

Is the CR-10 mini discontinued or something? It's not on the Creality site anymore, only seen it on amazon

@KE6DOA 6 лет назад

I have been toying with the idea of buying a 3-D printer for a little under a year now I have looked very expensive models but ultimately can't see spending that kind of money for the use it would get for me anyway. I would order The CR 10 mini right this very minute but I'm not coming up with enough print options for what I'm interested in but the only site I looked at was Thingiverse.. at least for now I would want to be able to print stuff for my hobby which is drones DJI to be exact any more input would be very helpful

@muscatgrumpy9033 6 лет назад

Thank you for your review. Which do you think is better with Creality CR-10 Mini or Anycubic i3 mega? .

@NexiTech 6 лет назад

msucat grumpy Well if we put build volume on the side. I like I3 Mega more because it has more modern design, touch screen, it take less space and it have filament run out alarm. Cr10 mini on other hand has much stronger robust frame and its slightly easier to change parts and maintain. If you don't need extra build volume I would go with I3 mega, but no matter which you choose they are both great 3D printers and you will not be wrong. Cheers!

@muscatgrumpy9033 6 лет назад

Nexi Tech Thank you for your reply. Which do you think is better for print quality? . I think that cr - 10 mini is more beautiful, looking at other reviews.

@nhlgamehighlights9605 6 лет назад

Can anyone please give me a good setting for Cura for the CR 10

@kevinzeringue524 6 лет назад

does the cr-10 mini need the air duct modification or has that been corrected on this model?

@NexiTech 6 лет назад

Kevin Zeringue It's corrected on this model.

@kevinzeringue524 6 лет назад

what is the retraction distance used on your extruder in this video?

@NexiTech 6 лет назад

Retraction distance was 6.5mm and retraction speed is 70-80mm

@jukka5648 4 года назад

That heatbed thermal image might be flawed. Diffirent materials dont produce reliable thermal image. You should put some tape on the surface to get reliable reading from it

@funnymanclayman 5 лет назад

He should have printed the t-800 but still a good review

@nathanielalaev9180 5 лет назад

do you have to put some type of adhesive on the bed?

@NexiTech 5 лет назад

Nathaniel alaev Yes, I'm using Aprintapro glue spray and stick. You have a link in video description.

@robertcrawford718 5 лет назад

I recently ordered one of these. It hasn't arrived yet but I do have a question. Do they provide torque values for the bolts used in assembly? If not, can you provide torque recommendations?

@NexiTech 5 лет назад

Robert Crawford Don't worry my friend. If you ever tight down few screws in your life you are going to be just fine. You don't need any torq wrench for assembling this 3D printer. Just a little bit of force. If you are really want me to guess then I'm guessing like 5Nm.

@robertcrawford718 5 лет назад

Thanks. I am probably a bit obsessive about torque specs because I spent about ten years as a field service tech. A lot of problems I went out on were the result of other techs', "not needing a torque wrench." Thanks for the review and the reply :)

@LMF5000 6 лет назад

Great vid once again. Just out of curiosity, which country are you based in?

@NexiTech 6 лет назад

LMF5000 Thank you. I live in Sweden.

@LMF5000 6 лет назад

OK, about to buy using your affiliate link. The banggood listing says "Notes: Do not include T-bracket(right side)" - what does that mean?

@NexiTech 6 лет назад

LMF5000 T-Bracket? Not sure. Maybe they thinking about Dual lead screw on CR10S? I really don't know. Update: I know what is! On Cr10 mini there is no T bracket on right side of frame. There is no need for it. It's ok. Don't worry. It's fine.

@LMF5000 6 лет назад

OK, order placed :). I wasn't offered the option of tarriff insurance for this one. Usually my other purchases have it to guard against high customs charges. Hmm.

@LMF5000 6 лет назад

Just bought it with your link. Thanks for the advice :)

@kevinzeringue524 6 лет назад

Also, in the video, you said that u printed the Sorceress using 50 micron layers, but then state after she was printed that u were using 150 micron layers. What setting was actually used? Sorry for all the questions..Just trying to learn this stuff!

@NexiTech 6 лет назад

150 micron or 0.15mm layer height was print settings for Sorceress. Cheers! :)

@AymanSuleiman 5 лет назад

What would you recommend, the Ender 3 or Cr-10 mini? Price difference is like $50 shipped from US.

@NexiTech 5 лет назад

Ayman Suleiman I would go with CR10 mini. It has stronger frame and better print quality out from the box.

@DynamicSun 6 лет назад

interessting video , btw. where can i buy the "Thermal camera" ? grz :-)

@NexiTech 6 лет назад

Thanks! Here you go mate: goo.gl/jStGbp Thanks for stopping by. Cheers!

@DynamicSun 6 лет назад

thank's - Question on the fly - which Software do you use for 3D printing ? Cheers :-)

@NexiTech 6 лет назад

DynamicSun CURA 3.1 version

@nithink94 6 лет назад

hello, do you get this quality prints right out of the box?? or did you do any tweaks?

@NexiTech 6 лет назад

Nithin K No tweaks on CR-10 mini. Just setings in CURA.

@nithink94 6 лет назад

Awesome :)

@Daniel-fz7en 6 лет назад

Hi, very good review ! Honestly, do you see a difference in quality in the details between the cr-10 mini and cr-10s. Personally I find that the cr-10s is too big. Thank you :)

@NexiTech 6 лет назад

Daniel Thanks, Honestly, I don't see any difference between Cr10S and CR10 mini in terms of printing quality. In fact in high print speed Cr10 mini have better print quality due to lower mass on Y carriage(Heat-bed).

@Daniel-fz7en 6 лет назад

Nexi Tech Thank you very much for your quick response and congratulations for your work! You make great videos!

@TheRoadTaken 2 года назад

Is blue loc-tite recommended on the screws?

@NexiTech 2 года назад

I wouldn't do that. It's not necessary.

@TheRoadTaken 2 года назад

@@NexiTech okay, thanks.

@karlsonchee2701 6 лет назад

Review on Snapmaker

@NexiTech 6 лет назад

I try to get one.

@ppowerman5000 6 лет назад

Im looking for my first 3d printer. This size is perfect for me. Should I get this, as my first 3d printer ? I have done a little research and it seems Creality is a great option, tips ?

@NexiTech 6 лет назад

Hector Camacho Definitely. CR10 mini is very easy to assembly, it's very reliable machine and it have great print quality. You will not be disappointed. I have 5 Creality 3D printers and they never let me down. They are build to last.

@ppowerman5000 6 лет назад

Nexi Tech , have read the CR-10 the regular version isnt good at printing TPU filaments, how about the mini? Also, what filaments brands should I get. Seems there are a lot of bad ones in the market. Im planning on getting PLA and TPU. Do you have videos on filaments brands for the CR -10 series ? Thanks for your feedback.

@NexiTech 6 лет назад

Hector Camacho CR10/CR10S/CR10-Mini are the same when it comes to TPU(flexible filament) as they all have the same bowden extruder. TPU filaments can be a bit tricky to print on Bowden extruders as they all have long teflon tube to push filament thru. You can print TPU on any CR10 but you need to print in lower speeds(20-30mm/s) and with higher hot end temperature to reduce pressure in bowden tube and melt the filament faster. About filament brands I use pretty mich everything. From cheapest possible PLA from Gearbest/Aliexpress/Local store/ to Expensive/Premium Brands. 90% of all my prints in my all reviews are printed with cheapest filaments and the print quality is very good. No need to stress about it.

@gajodafeira 6 лет назад

Better than Tevo Tornado? I bought mine on Gearbest with shipping and assurance for 330usd, it's a killer price!

@gajodafeira 6 лет назад

It's your first printer? Every 3D printer tested needs to be tunned up. It's not buy = print, you have to spend time with it, givbe it some love. If you say Tornado is rubish, buy a Anet A8 and you will see.

@gajodafeira 6 лет назад

Every case is a different case. Did you changed slicer? Tried different settings? There's so many variables! I found out that putting a printer bolt by bolt, from the scratch, it's a bad option for accuracy and out patients. Are part of the Tevo Tornado official group on facebook? If not, please PM me.

@amineboujida1276 5 лет назад

PACKAGE DIMENSIONS PLEASe

@paulobraz6117 6 лет назад

CR10S or CR-10 mini. Which do you think has the best cost benefit?

@NexiTech 6 лет назад

Paulinho Braz It's hard to tell, they are so close in price, but If you don't lack of space, have extra $$$ and you will not print ABS(without mod) then go with CR10. Other then that CR10 mini is great choice.

@paulobraz6117 6 лет назад

I will print plenty of ABS. Thank you for your help.

@MsGeneric123 6 лет назад

Then I printed out a new girlfriend, she looks great! What a beauty

@neon3d602 3 года назад

ummmmmm yh i though of something else just then lol

@aki_deratzu 6 лет назад

First

@aki_deratzu 6 лет назад

I love this box. I was planning to buy one and this makes me want to get it even more

@kevinzeringue524 6 лет назад

You DEFINITELY need to slow down while explaining the setup parameters for each test print. You speak so fast that it is very difficult to understand what you are using for each setting. Everything just rambles together.

@NexiTech 6 лет назад

Kevin Zeringue You are right. I was trying to make video short as possible. 5 minutes up would not make so much of a difference. Next time I will do it more slowly and extend video to 20 minutes.

@kevinzeringue524 6 лет назад

However, with that being said, everyone of your videos are brilliantly done. Love the complete coverage and thorough testings and explanations. Keep up the good work. Just remember, if someone is willing to watch and listen for 15 minutes, then another few minutes will not really matter. Thank you for your time and efforts. Great job!

@kevinzeringue524 6 лет назад

Also, can you please add fan speed to every build? Thank you.

@NexiTech 6 лет назад

Thank you for feedback. I try to add it in future review. Best Regards! Nexi

@MsGeneric123 6 лет назад

I can understand it