Drill Dr. 500X Tool Review -EricTheCarGuy

Подписаться 1,8 млн

Просмотров 170 тыс.

50% 1

Drill Dr. 350x: $54.99
jbtoolsales.com/drill-doctor-3...
Drill Dr. 500x: $104.99
jbtoolsales.com/drill-doctor-5...
Drill Dr. 750x: $126.99
jbtoolsales.com/drill-doctor-7...
As you can see in the video I have a lot of dull drill bits. In the past I've just bought new ones when the old ones got dull and didn't work as well. Now that I have the Drill Dr. those days are over. As you can see the tool works quite well at bringing new life into old, dull drill bits. It is important that you get the bit chucked up correctly however, if not, then it won't sharpen properly. I found that out during the taping of this review. The tool also sharpens masonry bits as well as left handed bits, both in a variety of metals.
That said, I think this is a good tool and something to be considered as an addition to any shop.
Camera: Brian Kast
Tool reviews posted every other Wednesday.
The best place for answers to your automotive questions: www.ericthecarguy.com
Discussion about this video:
For other tools and deals check out the Tools page at EricTheCarGuy.com: www.ericthecarguy.com/tools
EricTheCarGuy code lookup: www.ericthecarguy.com/obd-code...
Facebook: EricTheCarGu...
Twitter: / ericthecarguy
Google+: plus.google.com/1001951801966...
Information on Premium Membership: www.ericthecarguy.com/premium...
Stay Dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Авто/Мото

Опубликовано:

14 окт 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 246

@w0lf1969 6 лет назад

Everyone can have their own opinion, that's pretty much what comments here are for. But I have to say after getting this, watching your video because I don't have the directions, I was impressed with this thing. Great video. I pulled a 3/8" bit that I've had rolling around in a drawer for approximately 20 plus years, followed this video and DANG! I was impressed how sharp this machine got it. Great video and great tool to have. Thanks

@dabooge 8 лет назад

I bought one of these for my dad at auction for 10 bucks. I'm a machinist and I always sharpen my drills by hand, I've been at it for over 25 yrs. I thought this machine was pure gimmicks. After reading the instructions and showing my dad how to use it I was actually pissed off that I gave it to him. It works amazingly well and really does grind bits fast and perfect. I told my dad "I'm impressed" He said "wow I never heard you say that before"

@77.88. 6 лет назад

Nice to give your Dad something without regret, remember all that your parents gave up for you!

@dbeierl 4 года назад

It's made by the same people who make industrial drill sharpeners that cost thousands.

@jimbos1567 6 лет назад

I enjoyed your video immensely. It was articulate, concise, and very informative. Thank you for that. After having watched poorly done u tube videos, it's such a pleasure to watch one like yours. You have a fan and a subscriber. Keep them coming. Thank you.

@ericthecarguy 9 лет назад

For today's review, check out the Drill Dr. Drill Dr. 500X Tool Review -EricTheCarGuy

@jetjazz05 9 лет назад

Thanks for the review, Eric, this is a pretty handy thing. I'm surprised you're catching so much flack about how you should sharpen them by hand and not touch the shavings, blah blah blah. I appreciate the review as do many of us!

@robertlennes3100 9 лет назад

I've used the drill doctor for years, and it's really handy mid job, because dull bits are dangerous! I have the stitches to prove it. Dull bits require more pressure, too much and you have a broken bit. Stinks when your hand is what stops the sudden force. Never really did find the split to be terribly handy, but might give it another go after watching this video.

@ThaDickenz 9 лет назад

I work in a wood shop, and use the upper-end model. 700 or 750 or something. With as frustrating as it is to use a dull bit with wood, I could only imagine the frustration in dealing with metal.

@Inkd_watkins 9 лет назад

I think I found my next tool purchase

@thatguyb3rt 9 лет назад

Austin Frey Oh man does it suck, I've gotten so annoyed with it to the point where I've learned how to sharpen them on a bench grinder by hand. I'm to cheap to buy the tool and I've gotten by well enough.

@67scout73 8 лет назад

Excellent review and video. Very well done. Not too much info, not too little, very articulate. Thank you!

@Trainman0401 5 лет назад

I was very skeptical about the performance of this tool based on some of the reviews I read. However, after viewing your video I now have the confidence to purchase it. Your videos are very informative and your analysis is very fair and unbiased. Thank you very much Eric!

@paulkrack355 8 лет назад

Thank you! I bought one of these a long time ago and never took it out of the box! Now I feel more confident of how to use it! Thanks again!!

@johnlucier5654 2 года назад

If it came with a little chart called "anatomy of a drill bit" pay attention to it, itll reveal if theres a problem. Especially the relief behind the cutting edge. If it doesnt work right off you may have an issue with the indexing and the twist rate of your bit, experiment with it.

@somoninsam8807 6 лет назад

Thanks Eric i just got a Drill doctor 500x i never use it before ,now i learning from you and big help Thankssss Bro.

@bitemyram 4 года назад

Great review. Thank you for being so thorough. 👍🏻 I’m totally gonna buy this same unit. Got a bunch of dull bits just like you. Lol.

@LMacNeill 9 лет назад

Wow! That thing looks like a REALLY handy tool to have! I've got so many dull drill bits around here that could definitely use some sharpening. Cool!

@nealk6387 7 лет назад

thanks for the video, I just bought a 500x and am excited to use it. your video helps take the guess work out of it.

@pyang4155 6 лет назад

I like your honest tool reviews. Ive been wanting 1 for years but there are mixed reviews on the drill doctor. I finally got one and it works great. Its versitile, but that means people dont/wont know how to use them. After personally using it, i can identify the user errors that cause negative reviews. Im glad i finally got one.

@GhoulishCop 9 лет назад

I also like the manual! Too many products come with inadequate instructions. These at least look like they're clear, readable, and provide both supporting illustrations and text. Good to know!

@77.88. 6 лет назад

Many corporations are too lazy and cheap to write good manuals as they cost extra money and that hinders their bottom line profit. Look at the computer industry if you want a good example look at Apple. I am surprised they don't say Good Luck!

@JacobFrey 9 лет назад

Great video, Eric. Thanks for the demo!

@constantinoperez6111 4 месяца назад

Beautiful bit Sharpener,for faster and smoother drilling on metal start the process by using a center punch and small amount of lubricanting oil and it’s also good to have a small magnet to collect all the metal burrs for safety and easy clean up.

@johnkinnane547 9 лет назад

G'day Eric great review, I have owned the 700 for some time now and it has been worth every cent I paid for it. I would highly recommend it to anyone who uses drill bits it will save you money in the long run. Regards John Kinnane

@barryhunt5357 2 года назад

I ordered one today , Great testimonial .

@patamos7019 9 лет назад

Have the same model.....have had it for years .....good machine

@ChrisDIYerOklahoma 8 лет назад

Great demonstration/review. I am so tired of having so many dull drill bits.

@crumpeteer6477 Год назад

Me too.

@marceloiannini8199 7 лет назад

Eric, I might have missed something, but I think you set the drill bit for 118 degrees (using the corresponding notch in the positioning jig) prior to the first sharpening, which you did in 135 degrees (sharpening jig). If so, it may be the explanation for the difference in burrs between the first (135, which was supposed to be "better finish") and second sharpening (118, which is supposed to be "more aggressive"). Also, in Drill Doctor video, it says to "always split the 135 drills".

@acerjuglans383 5 лет назад

I saw that too.

@CarlosAmaya-nb6ps 2 года назад

@@acerjuglans383 me too

@crumpeteer6477 Год назад

Me too.

@MattN03 9 лет назад

Great video Eric. I think I'll be asking for one of these from Santa!

@robviolin1 9 лет назад

That was a great review of the drill doctor. It was very easy to understand. Thanks for your help. I think you should make videos on "how to convert your car to all electric" and tell us the different options. You have that way about you that someone can understand and you are easy to listen too. Thanks again.

@bantz001 9 лет назад

I bought a Drill Doctor several years back. I also have several sets of drill bits collected similarly. The old sets that have become partials due to broken smaller bits ended up combined and resharpened; they suffice for most jobs. Due to the fact they were re-sharpened on the Drill Doctor (often during some cold snowy winter day when I'm not out working on something), sometimes the point is much better than the original. I've even kept a few old broken off bits that are now "stubby" that once in a while work in a tight space where a new one would not. These are the initial go-to sets that sit near my drill press and battery drills. If I don't find what I need, I head to the tool chest for 1 of 2 indexed sets I keep for just such use.

@TheBrokenLife 9 лет назад

So is the Drill Doctor any good or not? I didn't understand your point.

@bantz001 9 лет назад

Maxwelhse Yes, the drill doctor is a very good tool. It allows me to have all those old mixed-set drill bits that had become discarded sharp and ready to use. By having the Drill Doctor, these "rejected" bits that once I didn't care about anymore now form the core of the tools that I pick up first.

@carbocycle 9 лет назад

I have an older model and it has been great. I love mine.

@lope129 9 лет назад

i got drill doctor and it works great. i must of sharpened 1000 drills and it still sharpens real nicely. better than you could every do buy hand

@Mr92cadi 9 лет назад

Awesome Video as always Eric, we have one at the shop i work at. And I'm the only one who takes the time to sharpen my bits. Everyone else just replaces them. Such a waste. Oh well, keep up the good work, and stay dirty!

@eipi5173 9 лет назад

had mine 7-8 years...still running strong but did replace the stone last year

@aracp 9 лет назад

Thanks for the review. Been looking at this product for years. You made it look easy. I'd like to have seen a 3/8 even 1/2 demo. I want the 700. Guess I will be asking for this on Christmas. Ha!

@LASD218 8 лет назад

Excellent video! Yours was the most comprehensive and settled my mind on getting this product. Thanks a bunch!

@johnreid859 9 лет назад

I am like you were. Buy a new bit when I had a dull bit . I liked the drill doctor demo. Next drill job I will look for a drill doctor. Thanks.

@czeddie71 Год назад

Thank you, Eric.

@AuralAttack 8 лет назад

I do this by eye with a grinder and a cutting disc... works like a charm every time! drill bits mainly get blunt if you aren't putting enough muscle behind it or have the drill spinning way too fast!...especially larger bits. cutting grease helps a lot too.

@jkholley1118 4 года назад

Love this thing! Not only does it save money but time with crap bit or running to buy new ones.

@alexoneal1029 9 лет назад

Thanks for this very helpful review of the Drill Doctor 500x Eric....been thinking of getting one of these for a while ...time to start leaving hints for my Wife and Daughters again --Christmas is coming LOL...

@CCGifford 9 лет назад

This is a great tool, I purchased one several years ago, it finally wore out so I bought the 750x. I even sharpen new drill bits, as the factory edge is not as good as the drill doctors.

@benmudn 9 лет назад

From my experience with the Drill Dr. I always do 2 full operations of sharping a bit. 1 just doesn't cut it for me. lol I have the original version and the sharping wheel can be flipped over so you can get more life out of the wheel.

@MediumHalf 9 лет назад

Great review, only thing I would've added is a comparison hole made with a brand new bit to see the difference between the resharpened bit and a fresh bit off-the-shelf.

@jasonmushersee 9 лет назад

Yeah they work. My brother has one and won't let me use it.

@murkinstock 9 лет назад

Holy crap I need to get one of those!

@timdouglass6491 6 лет назад

Your a good teacher and make good helpful videos

@crumpeteer6477 2 года назад

Cheers Eric.

@davidmagazzi6727 5 лет назад

thanks for the review, it was very informative.looks like it can work pretty good,and the better your hand control. also allowing the spring loaded tip guide thing to align the bit,followed by turning off the unit after the cut-before you remove the hand chuck will help the end result. i timed them, and it took about 21 seconds to cut with the split , 17 seconds to cut with the 118 , believe it or not it took 17 seconds to cut with the 135 degree also.maybe the tip got nicked a lil when you were taking it out of the split port. resulting in a slower initial cut, i wonder how well it does the outside edge of a 1/2 bit which often goes south when gutting hard steel making it difficult to finish through the hole.

@secularmerica9425 9 лет назад

Seems to be a good tool and does what it claims, thats always good.

@gcfcos 8 лет назад

Always wanted one of these

@ratbag359 9 лет назад

Looks very nice need on of these where i work.

@JamesNewsomeCaiLeighAnna 4 года назад

Good informative video. Much better than the official videos by Drill Doctor.

@bobalong131 9 лет назад

I work as a fleet mechanic and do a lot of van body repairs which involve drilling steel and aluminum regularly. A Co worker of mine showed me how to sharpen the bits on a grinder and it works absolutely fine and perhaps even quicker than this.

@johnlucier5654 2 года назад

Ive never seen anyone who claims to be able to sharpen them on a grinder, belt sander, whatever, actually be able to do so when asked. Oh I know there are professional machinists out there that can, but they are outnumbered 100 to 1 by everyone who say they can.

@ee222 5 лет назад

great review -- great pointers on using the drill dr. wow, this was posted over 4 yrs ago and i'm just now finding out about the drill dr.! i gotta' crawl out from under this rock that i've been liven in! got one question. when you inserted the drill bit at the 1st station, you set it up for 118 deg., yet when you put it into the actual cutting/sharpening station, you set it to 135 deg. why is that? also kind of related to that is, what's the purpose of the different degree settings at the 1st station if you only have 2 sharpening choices at the 2nd station (118 and 135 degrees)?

@davidjames1007 4 года назад

Looks easy and good, thanks

@bitemyram 3 месяца назад

Great video. I’d like to mention as an ol’timer young folks drill metal too fast. Always remember wood is fast metal is slow. If you are using a modern multi speed drill, drill wood on #2 fast and metal on #1 slow. Yes use oil as you mentioned. 👍🏻 lastly once you see the metal fragments start to appear they should very slowly come out of the metal forming almost a long spiral and not tiny flakes, adjust your pressure to make this happen. The bits will last remarkably longer too. I hope this helps and please try it and let me know if this helped you or someone else. Again, great video even if you are a young whipper snapper. 😂👍🏻👍🏻

@bigthinkinguy 5 лет назад

excellent video. Have you tried splitting the 135 degree? I've got mine out the box and will try it out this weekend.

@jimwilkinson657 6 лет назад

Thanks. Great video.

@kidritalin1 Год назад

I have the Drill Doctor 500 model. It doesn't work well at all. Perhaps I will re-visit it again and give er' another go before tossing it out. Thank you for this video. I gives me hope for mine.

@crunchdeath 8 лет назад

hey Eric thank you. i will be buying one just wanted see if it was worth iti.thank you

@hectyre 9 лет назад

Good video, I much prefer watching you do a review on something than the infomercial endorsement style.

@Bobman84 9 лет назад

Agree, but if he didn't do those informercial type videos (one only so far), how would he bring us all these other quality videos? Fair's fair I think.

@mark33545 9 лет назад

Bobman84 with the revenue generated from the ads on every one of his videos?

@davidchau252 9 лет назад

mike240se honestly Google doesn't pay out as much as you think, due to ad blockers and other reasons. The paid videos help fund new projects for the channel. He has a family a house and shop to pay for and on top of that very expensive car projects for the channel. It all costs a lot.

@Bobman84 9 лет назад

mike240se Let's be real. I don't see anyone choking on cigars whilst on their cruise boat in the great ocean based off Google revenue alone!

@hectyre 9 лет назад

I think if a company's product is good then they would be far better off paying Eric to do a proper review of it rather than just say "it's great" and read the advertising blurb to us. I don't blame him for trying to make money, I'd do the same but I don't think its what the majority of us like to see,

@shastrimaharaj4373 9 лет назад

I saw when u sharpening the dull bit it stops grinding after a while.did u try a new unused bit to see if it needed sharpening

@madisonelectronic 9 лет назад

The split keeps your bit from walking and stops the drill from being jerked through thin metal by the bit itself.

@zx8401ztv 9 лет назад

Great product Eric :-)), no more blunt as butter drills :-))

@spasticmuse4262 3 года назад

Already a longstanding fan of ETCG, but the algorithm spit this old VJO back up to top after I went on a bender of AvE's drill sharpening commentaries. So at the very end when Eric says, "Keep your drill bits sharp." ...I was half hearing it sideways a different direction....

@sudoku4god 9 лет назад

I've always just used a bench grinder to sharpen my bits.

@dreamingcode 3 года назад

Great review! I like this better than the 350

@gizzyguzzi 6 месяцев назад

why is that? I don't think I care about the split bit or 135 degree bits. What else is different?

@jameseidahl367 11 месяцев назад

Just as in chainsaw dust size, tells you how sharp your blade or chain is. Fine dust is a dull blade and course dust is a sharp blade. Sharp blades cut while dull blades grind, hense the difference in dust particle size. You can see the details here. These are amazing tools and they are made by a company in Bend Oregon. The proof is in the pudding, but in this case it is the dust.

@2LateIWon 9 лет назад

I have the 750X I think the only difference is it can handle bigger bits. But You can buy the chuck to accommodate the 135* is supposed to keep the edge longer than the 118* I like the 118* split bit

@rogeliomelgar5219 7 лет назад

wow amazing tool

@meyawabdulaziz3863 9 лет назад

awwwwwssome.... ive got gajilion drill bits in da shop

@DergEnterprises 9 лет назад

My uncle has one of these. We experimented and found out the drill bits get dull really easily after sharpening--such much so that it isn't worth using.

@eljonnymac 9 лет назад

Eric come kick it in seattle!

@brolicdabrave 9 лет назад

Great review! I always wondered how the drill doc. worked. I may be purchasing one in the near future.

@txtpqb 3 года назад

had to go back and look at this again because the manual is so unclear about the alignment set up ... IMO, the white lines on the chuck mean nothing but rather go by the stepped projections on side of the chuck to align the chuck/bit combo at the 118 mark. Done this and the bits sharpened perfectly.

@ab935 7 лет назад

Thanks Alex, Do you know if it would be able to put a point or angle on round steel/brass stock? I'm wondering if I can use it to make retaining pins as well as sharpen drill bits.

@fbexpunge 9 лет назад

That's not a titanium drill. It's a Titanium Nitride (TiN) coated high speed steel drill.

@Lakecenterlawncare 2 месяца назад

I think you are mistaken on the angle notches. The manual states that 135 is the mark to the left, or toward the - of the 118 mark.

@djnevous3us 9 лет назад

i really need that

@BuckandChuck24 9 лет назад

ERICTHECARGUY you are awesome

@johnsmith1474 3 месяца назад

You eliminate walking by punching a small mark onto the material before you drill.

@atomicdmt8763 Год назад

solid vid! 135deg is one notch to the RIGHT, fyi

@johnlucier5654 2 года назад

Heres what you need to know about the DD. The indexing system doesnt work with every brand of bits because many use an odd twist rate. If the twist rate of your bits is compatible, nothing on the market compares to the results. If the twist rate of your bits isnt compatible, its just going to be a frustrating mess. I have a set of snap on bits, they come out perfect every time. It just ruins a set of makita bits I tried.

@scotthosier 7 лет назад

Everybody talks about cutting oil but get some bit wax and you'll never use oil again.I believe the stuff I get is called Brute,I use it on bits,air saw blades,metal hole saws.....good stuff.

@patrickmorrissey2271 9 лет назад

That was a nice review. Nice job. On those titanium Coated drill bits, once the coating is gone, it's gone, so, that drill will wear out faster, but it did look sharp. A Cobalt drill bit is solid metal, and will stay sharp longer every time. Looks like a nice tool though. Thanks for the review.

@TheBrokenLife 9 лет назад

Titanium Nitride actually isn't all that hard nor does it reduce friction. It's mostly a marketing gimmick. If you drill 10 holes with a Ti bit the coating is gone off of the cutting edges.

@ohblondi 9 лет назад

I've never heard of the term splitting the bit, what does that actually mean/suppose to do.

@emiliog.4432 7 лет назад

A lot of people like the DD and a lot don't. It's better to learn to sharpen a twist drill by hand, on a bench grinder. Learn your drill point geometry. DD is made by the company that makes the Darex drill sharpener. Awesome machines but very expensive. I may buy one of these for small drills. My old eyes aren't what they used to be. Remember, check your drill points with a protractor and ruler. Angles and lengths are important. Using a punch mark will help keep the drill from walking. Thanks.

@cherylmcneil4703 9 лет назад

How ironic my instructor just showed us one yesterday!!

@joemarmon4843 3 года назад

Any idea on how long the stone lasts? You sold me on the 500x. I was looking at the 350 but seeing your demonstration I want that split tip feature! I have about 150 bits that need some serious attention and an additional 100 that will need help soon! Thank you!

@atomicdmt8763 Год назад

can be flipped over, also- for extended use

@namrednop 9 лет назад

Man ... I kept waiting to see if you were going to either tell us or show us what that little wrench was for. By the way, GREAT video! And even if someone couldn't read the instruction manual and they watched your presentation, I believe that they could probably properly sharpen a drill bit! One of your better tool reviews!

@ericthecarguy 9 лет назад

***** It's in the picture in the manual at the end. It's for removing the grinding wheel. Not necessary for this review in my opinion.

@namrednop 9 лет назад

EricTheCarGuy Yea, I know. I knew what it was for. These drill bit sharpeners have been around for many years now. I was just giving you a hard time since you did mention it at the beginning, and it was laying there on the table at the end. But then again, most folks that do this type of work but have not used this type of drill bit sharpener before, probably figured it out as to what it IS used for by the end of the video. As most good mechanics are usually pretty smart guys!

@Trials-and-Tribulations 9 лет назад

Saw this in a infomercial once, sounds like wahl hair clippers.

@cnoxseba 9 лет назад

great Eric ,do you know that you can buy sharpener for drill bits for around 2 - 3 euro ? i know its not the same but ...

@ab935 7 лет назад

Does anybody know approximately how many bits you can sharpen with this before needing a new wheel? Thanks in advance

@cam81366 9 лет назад

Hey Eric Question for you about a tool. Not sure if you have used one or not,but wanted to know if you have any input on it. It the Ross tech VW scan tool. I need to reset the basic setting on my 1999 cabrio and i also have a 2003 jetta that has a abs code. Anyway what do you think or have you another scan tool that you recommend?

@TheBrokenLife 9 лет назад

I'm not Eric, but I can tell you that spending money on the the best OBD-II scan tool you can afford is a very wise investment. Research around and try to find something that will data log (which is to say that it will record sensor data as you drive), and obvious take ABS data as well. There has to be dozens on the market and most are around the $200 price range on Amazon these days. If you have a laptop the Auterra A-302 is very interesting, but you may want to do more research on it based on the lackluster Amazon reviews. I've had their scanner/logger for Palm OS (that's what iPhones were 15 years ago except they weren't phones) for over a decade and I've been very pleased with it.

@oldowl4290 2 года назад

I just purchased the 500X and I'm having a hard time determining if my bits are 118 or 135 degrees. Is there any sure fire way to tell?

@davishorner4054 9 лет назад

Hi EricTheCarGuy, I am a first year apprentice training to be an Auto Service Technician and I was wondering if you could make a list of all the tools that a first year will need and what are decent brands to buy from.

@TheBrokenLife 9 лет назад

Eric has covered this at length, but, since I'm really bored and pretty much on a tare right now I'll hash it out for you. What Eric says, verbatim, is "buy the best quality hand tools you can afford". What I say, is buy the 400-ish piece Craftsman set (and Eric started wrenching with Craftsman too), $100 worth of Harbor Freight hammers, punches, test light, and pry bars, and go get to work. That's all you really need to get started. To be dead honest, a good 1/4" drive set and screwdrivers will get you through 80% of all automotive repairs.

@davishorner4054 9 лет назад

Ok awesome. Thank you for the insight

@DENicholsAutoBravado 9 лет назад

Maxwelhse That is a very good comment. I always ending up getting more. As soon as I do, I end up using the new tool a lot. It's unbelievable how much time you'll spend suffering getting to a hard to reach bolt, but when you have that one more angle with a wobbler socket or universal joint, then you'll have options you didn't have before. I'm always needing a different length extension for my sockets. I don't want to repeat myself, but it's unbelievable again how much you can get done if you can play with the lengths how much easier it can get. I avoid using universal joints to get at a different angle just because they won't stay put. Even if you aren't using impact, always buy impact universal sockets and wobblers. Otherwise, I always see them break.

@SilaghiHoratiu 9 лет назад

you are the best

@jayyoutube8790 8 лет назад

Good review, to be honest, I didn't thanked that tool seriously.. Until now

@rogerburton4880 4 года назад

I know one thing in your first drill try you had your drill running backwards

@emutiny 9 лет назад

You can grind your bits on a bench grinder. I use an angle grinder with a tile cutting blade. Very easy to do by eye with only your fingers fellas.

@TheBrokenLife 9 лет назад

It's not at all easy to sharpen a drill bit **correctly** on a bench grinder. That was the final in my machining course in college after having completed several lathe and mill projects that were toleranced to 0.0001". If you can free hand a drill bit to 118 degrees, *easily*, I'll dunk the moon through the rings of Saturn and sell a baby a bridge. Can you make a marginal impact on a grinder? Sure... It's won't be right though.

@emutiny 9 лет назад

Maxwelhse I'm sure the drill dr might do a better job. What do you mean by marginal impact? I told you that you can sharpen a bit by eye and drill steel all day. I think you need some more real world experience college boy.

@jackington5183 9 лет назад

Maxwelhse if you think that a tool like this will sharpen a drill bit perfectly for a job "toleranced to 0.0001"", you don't belong in a workshop. not to mention that for a job with a tolerance in that range, you cannot use a normal drill bit. this tool is to get a ruined drill bit back to a useable condition, not to bring it to brand new.

@FranciscoMartinez-of3gr 8 лет назад

I use a bench grinder, and I just eye ball the angle like from 40 to 45 dg , and it works just fine, sharp enough for me.

@johnmills7763 7 лет назад

emutiny ñ

@bruceboyles1895 8 лет назад

Eric I have a 300 DD & have very poor luck w/ it. I can't find anyone to help me w/ it in this area. There is no dealer or agent in the Boise area to help. I can't get any service from them. Do you have any ideas?

@stevo7350 9 лет назад

the best price of a known place where I have shopped before is Northern Tool And the price is not too bad for $99 500x or $129 750x. Just wondering if a bit is broken, which is another problem other than dull that I run into a lot. Can a broken bit be grinded off even then sharpened with the DR??? I mean if it is only broken off near the top

@pfun41 9 лет назад

Yes. I got one of these years ago, they don't even make the one I have anymore. Ive broken tons of bits. Just run them through a couple of times and they're good as new. I have bits that are a fraction of their original length but they still cut great.

@mariuszandruszkiewicz3845 9 лет назад

is your drill set up to turn anticlockwise on the first run?

@movieguy7398 9 лет назад

see how big the chunks were coming out after the sharpen.

@Cpl.Cadaver 9 лет назад

Not to bust your chops but, I used a drill doctor and found they didn't really do a very good job. I have better results using a bench grinder or a vertical belt grinder. Like your videos though and keep up the good work.