Drywall Flushers vs Angle heads.

Подписаться 8 тыс.

Просмотров 26 тыс.

50% 1

Me and the guys try out a bunch of different flushers to see which one is the best and most user friendly. #1The Tape tech glazier is the easiest to use due to the springs and design. I have taped over 200 homes with mines and still runs like a champ no mantinace. #2Columbia flusher #3 Columbia 2 in 1 #4 Canam painters kit and #5 Canam acujust.
canam Acujust:
amzn.to/3mgYSYr
Canam painters kit
amzn.to/39DNels
Columbia 2 in 1
amzn.to/3dsTXje
Columbia flusher
amzn.to/3wpHPIo
Tape tech gazier
amzn.to/3cIWWVF

Авто/Мото

Опубликовано:

1 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@stanislavandrievsky2182 2 года назад

The best way I find to use can am flushers is to use 2 inch flusher after you roll. Always struggled with 2.5 - 3 inch as had to push it hard and it never worked. Mud would run all over the place. Then someone recommended 2 inch and it’s a game changer. Flushers are great for small jobs and jobs done by homeowners, where screws are always raised up and you risk fckng up your expensive automatic head.

@fr8trainUS 4 месяца назад

I would be interested in the specs for that valve you have on your pump

@ChrisLascari 3 месяца назад

Good video, thanks

@gregjones3453 Год назад

Thanks for sharing👍

@kahunakumar1338 3 года назад

which one would you use where old textured drywall meets new drywall? like in a renovation. btw i was sooo nervous that one of tools would fall off the balcony ledge!

@csdrywallhawaii 3 года назад

Haha 😄ya I think the flushers work better in that scenario don't have to worry about potential dings.

@tanigonzalez5387 3 года назад

Good job

@gme10955 3 года назад

I use a Better Than Ever corner flusher and it glides like butter.

@kidjetrecon7153 Год назад

Oh how I hate the jam ups, made my tool out of corner bead. Change my blade or another good tip flip too the other side.

@Hey_me Год назад

I bought the can am flusher, used it and never got it right. Now it's sitting somewhere accumulating dust. I have another simple glazer that is cheap and doing the right job.

@simonrizk4451 8 месяцев назад

thanks!

@manuc3703 2 года назад

Hello, i am french and i will begin with nycor can. you still use it? Do you use the roller before the flusher in the video? thx you

@csdrywallhawaii 2 года назад

Yes roller first and the glaziers still running strong

@danjenlilyful Год назад

Thanks for making these videos my dude. I drywall new manufactured homes that are freaking exploded when they show up like u wouldn't belive, walls are always not matched up min of 1/2 -1"... there a different kind of beast.... they gotta look prestine when your done... it's all by hand but was wondering if these flashers work on already textured drywall? I'm sure they don't but figured I would ask... love the video and work #oregon

@csdrywallhawaii Год назад

These are actually not that bad and worth sampling especially for rough houses I think one sells for 15 bucks so if anything you can use it as the beater.

@michiganporter 6 месяцев назад

Man I haven't seen green board in a long time.

@SuperUncleRyan 3 года назад

I always keep the shaft of my mixer clean so I don't get chunks and boogers in my mud.

@michaeldavis7980 3 года назад

“TJ, you gotta acu-just!” 😂👌🏾

@csdrywallhawaii 3 года назад

Haha ya I Crack my self up most of the time especially when no one else laughs.

@tipsdepintura 3 года назад

Good job amigo

@csdrywallhawaii 3 года назад

THANKS brother 🤙🏽

@MarvelSnap59 3 года назад

Hi colleague, what do you think of plastic nycor flusher after all?

@csdrywallhawaii 3 года назад

It's actually pretty good we still use it occasionally

@jimgill7524 3 года назад

Not sure what size flusher young fella was using but seemed not enough mud for that size. I've got a few different brands of flushers and my cam arms are the best. That being said I way prefer my angle heads. I use my flushers more fore really choppy reno jobs where you get lots of old meets new drywall. Flusher seem more forgiving run over those rougher surfaces

@csdrywallhawaii 3 года назад

Great insight Jim ya the acujust is 3.5 so it was running rough. Should work better for second coating.

@shevinsacrey5862 2 года назад

I always wanted to try taping tools but watching this it looks so messy. You must spend hours after scraping mud off the floor and what do you do about all that mud the is falling all over the walls?

@shevinsacrey5862 2 года назад

@Wokepeoplearelazyasf lol, honestly though. Tapers and the electricians. Those are the two worst for leaving a mess.

@brennyharms7497 17 дней назад

It doesn't have to be this messy. We are very clean with them. Minimal mud ends up on the wall. However, it does take alot of practice.

@benjilamastus5134 Год назад

Where'd you get the filler neck bazooka filler at

@csdrywallhawaii Год назад

Ebay

@MarvelSnap59 2 года назад

Quelle patience.

@oswaldomartinez9508 3 года назад

Did you make that adapter ?

@oswaldomartinez9508 3 года назад

For the pump

@SuperUncleRyan 3 года назад

He bought it. He talked about it in a previous video. not long ago if you're looking.

@csdrywallhawaii 3 года назад

It's a canam pump.

@renannascimento2423 3 года назад

👍🏽👍🏽

@renannascimento2423 3 года назад

👍🏽👍🏽

@thomaswallceiling3623 3 года назад

Do you guys not roll your angles?

@csdrywallhawaii 3 года назад

Yes we do for the purpose of saving time we rolled them before recording.

@thomaswallceiling3623 3 года назад

@@csdrywallhawaii ohhh I thought they looked rolled but I couldn’t tell on all of them. I have tried em all and for me I just stick with glazing as it just works. Flushers aren’t bad though just seems like they leave more of a mess

@michaelcarson4887 3 года назад

No disrespect but I take that tj is still an apprentice? I only say because I use can-am flusher and they dont give me that kind of trouble. I use the direct flusher as well with a compound tube and works fine. I learned on hockey boxes and angle heads. I feel angle heads are better for sure. But I like a tube over a hockey box any day.

@csdrywallhawaii 3 года назад

Totally agree this was to show case using flushers for the first time transitioning from glaziers. At the end of the day there is all kinds of great ways to achieve a superior finish its all about what works for you and makes you money. Yup Tj and Omar are still learning Omar is about 85% and Tj is about 60%. Iam 95% always learning. Thanks for watching bro and your input.

@michaelcarson4887 3 года назад

@@csdrywallhawaii ohh I am just a glorified apprentice. I dig your videos brother. And this one was really good because I feel it shows what it may look like when your just picking these up for the first time. Such a learning curve. You and your crew look solid. And once again meant no disrespect.

@youtrades 3 года назад

Definitely not chunky peanut butter!!? Hahahahahaha😂 ooh thank you😁

@youtrades 3 года назад

That was an LoL irl :) love your channel and your authenticity brother!

@csdrywallhawaii 3 года назад

Awesome thanks for the support 🙏

@nicholasbaldwin4897 Год назад

Will these work on a concrete wall

@csdrywallhawaii Год назад

Yes but won't leave the angles as crisp as the glazier but don't have to worry about ruining the blades.

@nicholasbaldwin4897 Год назад

@@csdrywallhawaii ok great...an what head can I use to apply the compound to the concrete angle...

@nicholasbaldwin4897 Год назад

@@csdrywallhawaii will the plastic head for the mudshot work?

@iceman2008able 3 года назад

where do I get that donut?

@csdrywallhawaii 3 года назад

Hahaha I think he gets it at 711 but must not be that good cuz Iam always throwing out half eaten donuts.

@brennyharms7497 17 дней назад

Lol

@margaritocruz3476 2 года назад

Yo prefiero el ángulo normal el otro le tienes que puchar mucho

@louish.9414 2 года назад

Solar panels 👌 tool to close to edge lol

@SuperUncleRyan 3 года назад

I think I'll stick with my glazers.

@csdrywallhawaii 3 года назад

Ya glaziers are the best imo.

@fakawat7220 Год назад

😀🤣

@kirkdunn1379 2 года назад

Yeah where is the corner roller......messy af, lot of cleanup on walls

@mannysoria5094 3 года назад

👍

@mikialamahoney8375 3 года назад

Cheehoo

@edover50 3 года назад

Cheeto!! Cheehoo chewbacca ...darn auto correct

@csdrywallhawaii 3 года назад

Haha Ed you Crack me up man.

@dovanimorga288 2 года назад

Es mejor en el ángulo normal eso está bien feo

@nickberna2146 3 года назад

Yo prefiero el sistema de antes

@xxjonasz83xx 2 года назад

Yo tambien..se hace mucho mugrero en las paredes y pisos

@03amilcar Год назад

@@xxjonasz83xx no mi amigo yo trabaje 20 años asiendolo asi el sistema d antes a mano . Y tengo 6 años haciéndolo el ángulo con herramienta . Y le aseguro q mucho más limpio rápido y fácil . Todo está en saber usar bien la herramienta