Fiesta MK7 1.0 EcoBoost Engine Rebuild | Part 1

Подписаться 10 тыс.

Просмотров 42 тыс.

50% 1

So after much deliberation I decided that I would tackle the 1.0 Ecoboost engine rebuild myself. In this video I get the engine stripped of as much as I can (and probably a lot more than I needed to) in preparation for removing the timing cover, the infamous crank pulley bolt and ultimately the cylinder head. In the next video I'll get the head off and see just how much damage I'm dealing with.
A massive thank you to both @snotrocketfiesta and @airbourne_globe_trotter for your help and advice on this rebuild so far (I'll try not to pester you too much) but I really appreciate the help more than you could imagine.
Please go shown the people who support this channel some support themselves, links to their instagram pages are below
/ snotrocketfiesta
/ airbourne_globe_trotter
Music Credits
---------------------------------
Unstoppable - Spence
Artist: Spence | Track: Unstoppable
Music provided by RU-vid Audio Library
Download MP3: support.google.com/youtube/an...
Watch: • Video
Make Me Move (feat. Karra) (Tobu Remix)
Song: Culture Code - Make Me Move (feat. Karra) [Tobu Remix] | NCS Release
Music provided by NoCopyrightSounds
Watch: • Culture Code - Make Me...
Download/Stream: ncs.io/TobuRemixCr

Авто/Мото

Опубликовано:

20 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 52

@tonywood6332 2 года назад

I’ve sold my mk6 to a Guy in Barrow in Furness (I’m in Essex!) being collected on 27th, but will still watch your vidz mate, I like the “oh well, I’ll have a go” attitude 👍keep up the good work bud

@Inactiveaccount358 2 года назад

Btw to get the injectors out you don’t need to take the rocker cover off, you just need to remove the plugs and the t30 bolts (I think) that hold the injectors down, might take little persuasion to get it out but eventually all 3 should come out with the rail you’ll need new seals too

@jobeblogs4539 Год назад

Use a hose clamp. Wrap it around your lambda (02) sensor tool and tighten it. The tool cannot warp with the hose clamp around it, so you can crack the nut with full torque.

@bobp6742 2 года назад

I've just replaced the Flexy on the cat on my 1l 2014 fiesta and the bolts holding the cat to the turbo I had one stud and three bolts, I've had the car from New so know no one else has been fiddling, must be just ford using whatever is laying around on the floor at the time.

@samtripp6752 2 года назад

Just had my cambelt changed garage geezer couldn’t stop swearing and he’s never doing an ecoboost. He’ll tell the customer to do 1 if he ever sees one lol

@craig1996 2 года назад

so many people shit over these engines, they're not even that bad, can tell who doesn't look after there cars 😂 my 2012 is still going strong with almost 80k, stage 1 map and gets driven hard.

@MendItModIt 2 года назад

That’s great to hear mate 👍🏻 love the positivity! Far to many people are quick to put stuff down because they don’t like it. It’s an awkward design and I’d like to know why Ford decided on this engine but like anything, if you look after it and maintain it as intended then it should work and work well 👌🏻

@craig1996 2 года назад

@@MendItModIt yeah man 100%, think the main issue lies with the fact so many little boys financed them when they first came out, ragged the life out of them then flogged them on with low miles, don't help when people use the wrong oil 😂 aslong as it's looked after they're brilliant. 150bhp from a 1 litre is more than enough to have fun in on the twisty b roads too! all the best with the rebuild, heard they can be a bit of a pain, mine's due a cambelt witch i'm dreading 😂

@EssexStoner 2 года назад

Clearly haven't seen the ecoboost nightmare group on Facebook, thousands of people have been affected by these cars, some fail on very low miles and they are maintained too

@MendItModIt 2 года назад

@@EssexStoner nothing wrong with having a go mate, throw away culture gets us nowhere. You can learn so much more by trying to repair things too

@EssexStoner 2 года назад

@@MendItModIt my comment wasn't aimed at you fella, your braver than I am attempting to fix the engine yourself, I wouldn't even dare too. Keep up with the work dude, I went back to mk6s after the ecoboost and been doing more maintenance and mods myself I prefer a mk6

@694069406940 2 года назад

loved this video is that engine the 140 bhp lump its the first time my self that i have seen one striped down ✨

@MendItModIt 2 года назад

Thank you 🙏🏻 yeah it’s the 140, only difference from the 125bhp is the map and gearbox ratios I believe 🤔 not many people attempt it and I’m starting to see why 😂 but I’ve got this 🤞🏻

@doddsalfa 11 месяцев назад

@@MendItModItwhen rebuilding engine like this is it easily possible to put bigger turbo and stronger piston for more horsepower?

@brianiswrong 2 года назад

Looking forward to this. We have a 13 plate ecoboost 125bhp fiesta with 108'500 miles on her. The overheating was a plastic pipe junction wasn't it? We are getting to the mileage/ age for a timing belt change,which is a big job and hot me a quote of £700 😲 Which is a chunk of change on a car worth £3k.

@MendItModIt 2 года назад

I believe so, this one I think overheated as a result of the accident it was in. There’s a pump that supplies the turbo with coolant which was broken when I got the car and water leaked straight out when I tried to top it up. My guess is young driver, bumped it, didn’t want insurance to find out, drove it away from the scene, didn’t realise it emptied its coolant, overheated and they go rid. Can see why the belt costs so much to have done. Its an odd design, be interesting to find out why they went with it

@EssexStoner 2 года назад

I'd sell her while you can, I had a 2013 fiesta ecoboost titanium and she lasted till 90 odd thousand miles till the engine went. Mine was a coolant pipe bursting from the coolant tank due to ford's stupid design, basically a coolant pipe is kept in place in the coolant tank by a plastic clip it sits in the pipe the hot boiling water makes the plastic brittle so it blew randomly. I sent it to ford they stripped the engine to diagnose what happened and it flooded the engine, sent bits of plastic through the turbo and into the engine. Had a reconditioned engine and new turbo put in then ford's broke the o2 sensor putting the engine back in and told me I had to buy a new one

@malachymilligan4660 Год назад

Which Haynes manual are you using? I have an Ecosport with the same engine and they don't seem to have one specifically for the mk7 and they definitely don't have one for the Ecosport.

@raycrook4525 2 года назад

I'm working on a 2012 Focus at the mo. (same engine) Aiming to remove the engine straight up per other RU-vid videos. Had to take a stress break as not yet been able to remove the bottom 3 inlet manifold bolts (can't seem to reach them from the top, sides or bottom) and couldn't get to the starter motor top bolt from underneath the car (need it off to fit the clamping tool). Maybe I'm just not up to this now I'm old and wrinkly :/

@raycrook4525 2 года назад

Just noticed from your video that the lower 3 bolts don't have a plain hex. head. Either studs or thread extensions? Maybe I was looking for the wrong thing.

@schweitz70 Год назад

Hi ! What was the mileage of this engine before starting the rebuild ? Thank you :)

@denispalmer9055 2 года назад

Upload part 2 please. 😁🤣👍

@MendItModIt 2 года назад

Give me chance mate 😂😂

@martinstefanus371 4 месяца назад

My Fiesta Ecoboost is experiencing oil and water mixing in the engine, even though I have replaced the cylinder head gasket and also the cylinder, does anyone have any suggestions to help me?

@lifeofderv 2 года назад

The cylinder head are prone to cracks in the exhaust port scrapped many because of this

@MendItModIt 2 года назад

That’s what I’m worried about. Not ordering anything until I know the extent of the damage. Could you not replace the head though?

@lifeofderv 2 года назад

@@MendItModIt yes just replace if the head is okay then when you remove the cams and the buckets they are solid so make sure they stay in order if you change anything like have valves and seats cut then they must be checked

@bdunc9353 6 дней назад

Sorry if this has already been asked, what year is this engine? I have a 2015 Ford fiesta SE manual transmission. Think the timing belt broke and/or oil sump clogged, will be looking into it further here in the next few weeks. Hoping this video will come in handy if i decide to rebuild. Thanks

@MendItModIt 6 дней назад

It’s a 2014 mate

@bdunc9353 6 дней назад

Awesome. Thanks for the reply! I will continue watching

@alanpercival6428 2 года назад

Fiesta eco-bang (or) as ford call it an ehco boost

@MendItModIt 2 года назад

You wait until I turn this car into the one litre Corsa eater ecoBEAST it was always meant to be 😂😂

@CookRacingUK Год назад

Everyone: Ah cool only 3 cylinders should make this engine easier to work on Ford: Lol let's make them take off the side if the engine just to get to the timing belt Wow. I didn't expect that...

@jorgenascimento9710 Год назад

This is a mk6 not the mark 7. Mark 7 started on the end of 2017 models.

@MendItModIt Год назад

It depends where you are in the world. In the UK it’s a MK7

@alfaroo36 2 года назад

Part 3?

@MendItModIt 2 года назад

Hopefully soon but struggling to find the time at the moment 😢

@acky91 2 года назад

belt submerged in oil :d omg

@MendItModIt 2 года назад

Maybe submerged was the wrong word, I don’t know, but it definitely runs through the oil as I understand it 🤯

@acky91 2 года назад

@@MendItModIt i have mk6 2009 1.4lpg engine. And this lifetime shit manufacturers place is bulshit. Like geaebox oil lifetime. Did you change it in st?

@bobp6742 2 года назад

@@acky91 Ahh but they don't specify how long a lifetime is, could be anytime between buying the car and fifty years.

@acky91 2 года назад

@@bobp6742 you think any oil can maintain performance 50years? I think they mean 5 to 10years lifetime in new era where everything last a blink.

@waynelittle5583 2 года назад

My hatred for those stupid engines sick of seeing them at work lol currently in a fight with ford for a lady 15 plate with that engine 16k miles been fully serviced by ford ect packed up the other day and ford don't want to know one of the people I spoke to in there service department said there the worst engine ford has ever made

@djedUVprojector 2 года назад

These look like "throw away" engines. Oil based belt bathed in oil (will soften the teeth). Ford tried too many new techniques in this beta design engine. Later engine with chains will be better maybe? 😕