Harley 95 is the Twin Cam 88 Sleeper

Подписаться 69 тыс.

Просмотров 73 тыс.

50% 1

The Twin Cam 88 with the 4 inch stroke is a real sleeper when converted over to a 95. Harley 95 kits are available right off the shelf and they are one the best upgrades out there for a Twin Cam 88. Cam swaps on the Twin Cam 88 add quite a bit but they still fall short of the 100 horsepower and torque mark. Adding a 95 conversion with the short stroke of the 88 makes for quick revving engine which puts you in the power torque faster and it's just plain fun to ride. You can bore your factory Twin Cam 88 cylinders to a 95, 97 or even a 98 but then you have to wait on machine shop turn around time. A right off the shelf Harley 95 kit is the quickest and easiest way to get your Twin Cam 88 some displacement and not break the bank while doing it.
SUBSCRIBE FOR MORE ru-vid.com?sub_...
Random and Funny Videos!!
WEEKND OPs Playlist www.youtube.com/watch?v=5HHmv...
Bikes on the channel:
Motorcycle: 2016 Harley-Davidson Sportster XL1200CP (Sportster 1200 Custom)
• Harley-Davidson Sports...
Custom Parts Installed:
LED Headlight amzn.to/2LY4NA4
LED Bulbs Front Signals amzn.to/32PjpIT
LED Bulbs Rear Signals amzn.to/2OaqP5j
Smoked Out Turn Signal Lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Heavy Breather air cleaner
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Reach Seat
Harley-Davidson Chrome and Rubber Collection grips
Drag Specialties Offset Clevis Footpeg Conversion Kit
Aftermarket Chrome Foot Pegs amzn.to/30C68SA
After Market Chrome Shifter Peg amzn.to/2LBTTAZ
Aftermarket Chrome Crash Bar amzn.to/308QFhg
Aftermarket Detachable Back Rest
Aftermarket Docking Hardware For Back Rest amzn.to/32RhZ0j
Harley-Davidson Air Flow timing cover
Harley-Davidson Air Flow clutch cover
Screamin' Eagle spark plug wires
Screamin' Eagle spark plugs
Black Front Axle Covers amzn.to/32TrSe1
Flipped Down Stock Mirrors
Motorcycle: 2017 Harley-Davidson Sportster XL1200X (Sportster Forty-Eight)
• 2017 Harley Sportster ...
Custom Parts installed:
Harley-Davidson Factory Security System
LED Headlight amzn.to/2OcFih2
LED Bulbs Front Signals amzn.to/3086pQV
LED Bulbs Rear Signals amzn.to/34VFfw9
Smoked out turn signal lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Exteme Billed Air Cleaner (Black)
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Burst Collection Foot Pegs
Harley-Davidson Burst Collection Grips
Harley-Davidson Burst Collection Shifter Peg
Aftermarket Black Crash Bar amzn.to/32MsUZq
Screamin' Eagle spark plug wires
CNC Front Axle Covers amzn.to/31GGE7W

Авто/Мото

Опубликовано:

20 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 280

@GixxerFoo 2 года назад

Would you order a 95 kit off the shelf or opt to tear your bike down and wait for machine shop turn around?

@arronanderson3902 2 года назад

I brought my bike into the my local bike shop it’s a 03 fatboy was a 88. First he did cams, tensioner air cleaner and a program. Was not enough pull for me so I dropped it back off and had him bore it out and do head work I want to say the bore n head work was just under a grand. Money well spent!!

@donwaltman4276 2 года назад

Great video, I would probably take one off the shelf, but definitely add a good cam and head work. Don't forget to upgrade comp and clutch, oil pump ect. Hey foo see you next week!

@OSOFLHP 2 года назад

I'd rather have cylinders match the pistons,

@regnar19881 2 года назад

I'm close to upgrading my '04 Fatboy 88ci to a bigger beast. I'm leaning towards boring the stock jugs to 100 inch.

@nbowling10trio 2 года назад

I bought an 03 883 with plans to put a hammer 1275 kit in it which I bought a few months later when they had a sale. I would definitely buy another kit from hammer on a bigger bike. I'm all about the torque ,0-60 or 0-100 is where it's at im not interested in going over a hundred on a bike these days. I rode big bore sport bikes in my twenties like an idiot. More into cruising now with a few rips here and there

@jimgomez5396 11 месяцев назад

88 to a 95 90 hp 103 torque, puts a smile on my face!

@williamyoung3340 2 года назад

I've always said that Harley designed the TC as a 95" to begin with and then produced it as an 88" so they could sell a lot of upgrade kits.

@GixxerFoo 2 года назад

I wouldn't doubt that for a second, that's exactly what Harley-Davidson does.

@kweitmann6913 2 года назад

I picked up a "slightly used" 95" SE big bore kit with 10.5:1 compression pistons and added a S&S 510 gear driven cam set up on my 2003 Softail. Best money ever spent for some great power that's very reliable with NO mechanical issues whatsoever. Motor has 80k+ miles and she's still running strong!!

@marcolabastida465 7 месяцев назад

Is it a carb or EFI ?

@kweitmann6913 7 месяцев назад

@@marcolabastida465 She’s carbureted

@marcolabastida465 7 месяцев назад

@@kweitmann6913 the stock carburetor?? I'm working on a dyna and I'm thinking to use the same set up, only change the cam to a 509 s&s , whit those pistons are u using Compression Release?

@kweitmann6913 7 месяцев назад

@@marcolabastida465 The carb is stock except I drilled the hole in the vacuum slide to a #30 and clipped about 3/8” off of the slide spring. And oh yes, compression releases are a must. Went though 3 starter clutches before adding the comp. releases.

@lancek3387 2 года назад

I will second the 95 is no slouch. I had one in a 2001 Ultra a few years ago, and after riding beside me (I was 2 up) a guy took in his new '14 Ultra for a stage 4 because he was so irritated at his bike. The 95's rock. Hands down.

@davidfaria6194 2 года назад

When I did mine I had to upgrade the clutch because the stock clutch wouldn’t hold the added torque the 95 inch kit had so make sure you upgrade your clutch

@jimmyp6443 2 года назад

Thank you still learning on this new stuff ,in closing all you kids need to ride a ,74 inch pan head. Still riding my ,64 pan since early 70" s

@GixxerFoo 2 года назад

That's awesome! People forget those bikes used to be rode cross country! Today people think you can't do it unless you have a loaded out touring bike with a stereo. Don't get me wrong that helps but all you need is a windshield and some bags.

@jimmyp6443 2 года назад

Windshield ,bags. and a panhead

@frnktdmn1937 2 года назад

Thank you Foo and all brothers comment content, this will halp me navigate choices for my '06 RK.!

@GixxerFoo 2 года назад

We have the best community on RU-vid by far!

@rodgerbambauer123 2 года назад

I've been running my 03 Road King since it was new. Installed 95 inch cylinders and cams, and pro pipe at 10,000 miles. Upgraded the cam chest as soon as the kit came out. Same with an ignition module. Been running it that way since then. It's no slacker....

@GixxerFoo 2 года назад

They do run very hard!

@anchorsaweigh9893 2 года назад

I am a huge fan of the 95ci. Add a Oil Cooler, Cam, Makuni Carb, Decent Exhaust and it really does have good power and it’s actually really reliable.

@JohnSmith-de2mz Год назад

Mine is a 03 FXD, 95 in. DarkHorse crank and H beam rods, Wood TW8G gear drive .590 cams. Mondello heads, 10.5-1 comp., DynaTek ign., Jetted carb etc.etc. Over 115 to the wheels and revs quik. I love it.

@chuckkifer1551 2 года назад

Mine has a 95 kit with Keith Black 10.5:1 pistons, 570 cams, ported and polished. She pulls like a freight train and looks like a stock 88.

@GixxerFoo 2 года назад

That's what l'm talking about right there, that's a sleeper! I didn't even go into 10.5:1 compression either, you and l both know what that bike is capable of 👍.

@tl5108 2 года назад

That thing has to haul ass

@marke7445 2 года назад

I used to have a 2002 FXDWG and did the 95” kit with stock heads and a jet jet in the stock carb. I did add the s&s 510 gear drive cams and that thing was a runner!! Never put it on the dyno but I could pull and carry the front wheel through 2nd no problem!

@Dynachop420 Месяц назад

S&S 100 inch kits for twin cam 88s are pretty impressive too

@GixxerFoo Месяц назад

Yeah they are! They can put down over 100 horse pretty easily!

@johnpalmer6822 2 года назад

My stock 2002 flhrsei with the 95 has always ran good enough for me. I have thought about cams and such, but I haul a pop up camping trailer with it, and has done well doing that for the last 20 years.

@macburgess6785 14 дней назад

I love my 95 ci. I have a bit of a Frankenstein. 04 RK Classic fi. Power vision wide band o2 tuner, Bassani 2 into 1 , jp precision 2b heads.i got a set of 02 casses for the timken bearings, i got the casses cleared for a Woods tw6hg cam. The crank is welded plugged and trued. Im pushing 190 ccp. Om using pop up comp releases. I keep up with the 114ci no problems...

@scottarmstrong1172 2 года назад

I'm with you on this one. I had a 95" Zippers torque king kit on my 06 street glide that worked very well. It was a little lacking in hp but had a ton of torque. Even on car motors I prefer a big bore over a long stroke, for the very reason you've stated. Also strokers tend to run hotter.

@slickwilly1099 2 года назад

@knucklebuster47 2 года назад

Learned that with Small block Chevy vs BBC

@Jack-wi5qr Год назад

I’ve had my’05 road king 88 for 10 years and no complaints. Had a Vance &Hines Pro pipe when I bought it ( hated the sound). Made my own pipes and baffles that everyone I ride with says sounds great,though a little crispier tone like my irohead with homemade exhaust had. Never did have it re flashed and it’s been running better than ever. I’m happy with it as is,not planning to build it up .

@HagsRideOrDie 2 года назад

It also depends on how you ride. For instance some guys enjoy a sporty ride; high revving, speed cornering, high speed lane changing etc. BUT I just like getting up to the speed limit quickly without a bunch of high revs. SO I love a high torque engine that can effortlessly shove my fat ass down the road.

@GixxerFoo 2 года назад

The cam profile decides when and where you get your power, good torque cam in a 95 kit will give you that off the line pull.

@superplumber5 2 года назад

What's up mr .foo , I have an 02 road king with S&S 509 cams support plate and oil pump. I run a thundermax tuner . The local Indy took it for a ride and swore it has a 95 inch in it. I did my research and got the best cams for my application because I didn't want to pull the heads and change the springs for bigger cams. Bike runs absolutely flawless. 800 lb bike needs a torque cam to get her moving. She's real snappy and hits 80 really quick. My famous saying... Miles of smiles.... great stuff Mr Foo

@GixxerFoo 2 года назад

That right there, your bike exemplifies exactly what l talk about the channel! Right cam, right parts and the right bike! I appreciate your support on the channel!

@wingandhog Год назад

I have a carbureted 02 Electra Glide with a rebuilt Fueling component cam chest (hydraulic plate, tensioner shoes, high capacity oil pump, lifters) but I went with S&S 510 cams. The performance gain from the 510’s kick in at 3000 rpm’s. Or around 70 mph which is perfect for Highway cruising and passing. And that’s at half-throttle. I did this upgrade two years ago and it’s like having a new bike.

@clubstyleridahd4695 2 года назад

I finally got that hammer 1275 kit with the 570 cams and xb heads. Its way more rowdy and sounds different too. Tons of torque! Your reviews help me make the choice to go with hammer. Keep it up! Love the Harley performance side

@GixxerFoo 2 года назад

Thank you! That is awesome! That's an excellent street setup for a Sportster! It's a night and day difference, l hope you're enjoying it!

@rustyshackleford4059 2 года назад

Right on man.. I have an 88 sporty that I stuck a hammer 1250 with a set of andrews V2s in it last year. Has a set of 87 bathtub chamber heads as well. I could only wish to have some xb heads on this year. they don't run on first Gen Evo sportys. Not real sure why, not really researched it, maybe gixxerfoo knows lol. I know yours has to run like a scalded dog because mine does and not near what ya got on yours lol. Hammer Performance makes solid kits for sure and nice dealing with them as well..

@clubstyleridahd4695 2 года назад

@@rustyshackleford4059 oh ya it runs so good. Its a whole new bike. My buddy has a similar build to mine ( 10.5:1 comp. 560 cams) his should be faster maybe it's my pipe idk. I was out running him at Partial throttle and short shifting because I'm still in the break in process. The amount of torque I have now is the most noticable difference so far. I'll report back after I Dyno it and can go full throttle to 7000 rpms.

@slickwilly1099 2 года назад

@@clubstyleridahd4695 ya report back on the old ladies dusting you with her moped stuck in low gear.

@clubstyleridahd4695 2 года назад

@@slickwilly1099 ya because that makes a lot of sense right? In the Harley world there isn't much that can hang.. and if your talking about sport bikes I have one of those too and many other bikes. I've been riding for 16 years I've ridden all kinds of bikes. Explain what you are comparing it too that makes it slow?

@cardboardkiller6883 2 года назад

Great video! Exactly what I'm looking for. Some good performance that doesn't break my bank! I don't need to have 10hp more for $2k-$3k. Around 100hp or just shy of it is enough for this old cowboy 🤠

@GixxerFoo 2 года назад

Glad it helped! 100 horsepower goes a long way on a Harley, you'll feel the difference for sure!

@Red66gp 2 года назад

Great quality and information I’ve come to expect from this channel! Keep up the great work and research! Thank you!

@GixxerFoo 2 года назад

Thank you! We really appreciate the support!

@jamesball2128 2 года назад

This is exactly why I went with a 95" build on my Softail, shorter stroke, sooner powerband and not mention the con rod angularity thing. I went with S&S Super Stock heads with 1.94 intake, 79cc, SE flat tops and matching jugs and I guess that puts me around 9.75:1 can comp, Andrews 37g, Mikuni 42 and Bassani Pro Streets... don't know how much HP or TQ I'm making, but it sure does haul ass! You are absolutely right Gixxer, not to count out the 95"... great segment as always!!!

@mattinykanen7001 2 года назад

by the way i have the same parts except s & s pistons and 585 cams 10.7 compression. 100.3hp 150nm. the torque is in the upper rpms. Some day i test woods cams.

@dereknapier1132 2 года назад

Thanks @GixxerFoo for this video. My 06 Road King with my 95” build is fun, and does alright with the bigger engines. The Feuling 543 Reaper cam is pretty stout. I run 10.5:1.

@johnblackstock7653 2 года назад

Thanks for the 95 praise. I have a 02. I can testify that this baby runs 👍👍

@GixxerFoo 2 года назад

Right on! Those 95's are very strong motors, they will pull on built motors with much larger displacement all day long.

@lindalloakes7102 2 года назад

Same

@ardyrides834 2 года назад

I just got a 2000 model carbureted Dyna FXDWG with 22,022 miles. The bike is in near perfect original condition. The Guy threw in 2 extra seats and Sissy bar pads. One is the original seat and Sissy bar/pad, a luggage rack, a new Front tire, tube and Rim band in the box. Also, He gave me the original exhaust, (it has Vance&Hines staggered Straight shots now), a new H-D brand bike cover, and a Service Manual. I think I got a pretty good deal. I plan to upgrade the Cams when it's time to replace the original Cam Chain Tensioner Shoes. Thanks for your videos and keep up the good work! I think I'll upgrade to SE Hydraulic Cam Plate Chest, High volume oil pump and "Off the Shelf" parts like you mention here.

@superplumber5 2 года назад

Pull the cover and check the tensioners

@ardyrides834 2 года назад

@@superplumber5 - I already did. The shoes have minor wear on both of them. I removed and inspected the fuel petcock and fuel strainer. I removed and cleaned the K&N Hi-Flo air cleaner. I did a 3 hole oil and filter change. I'm flushing and bleeding the brakes now. Gonna take the front wheel to the shop in the morning, to have the new tire installed. Gonna replace the brake pads also. I'm gonna ride it awhile before I do anything else to it. It rides quite a bit different than my StreetGlide...

@josephcivita1450 6 месяцев назад

carburetor, my 2002 RK I did the 95" S&S 9.7:1 piston and cylinder kit and S&S 510 gear drive cams. I'm running a Ramjet one piece intake manifold, Mikuni 42mm carb, Supertrap 2 into exhaust and Thunderheart coil and ignition. I'm very happy with the performance.

@ganimusicinc.8477 2 года назад

I’ve done the 95 big bore 203 cams lifters and timken bearing I love it

@timmussmann5143 2 года назад

I just bought a 2003 wide glide with the 95 kit just waiting to pick it up!!! Can’t wait

@yoshit9819 2 года назад

I look forward to these weekly videos

@chrish5791 4 месяца назад

I’m afraid that I may be addicted to them!

@cm_mechanic6868 2 года назад

Excellent content!!! My 06 EG classic has the SE Kit with the SE plate, oil pump, TTS Tuner, and Khrome Werks header and exhaust. My Dyno run had 92 ft lbs and 84 hp.. Your video could not have came at a better time as I'm looking to change the cam, and have some head work done. Looking to really see what I can really get out of my little 88!!! lol

@GixxerFoo 2 года назад

Those really good numbers with a 88 honestly, you've got a great setup to build on. You put a 95 kit on top with a good cam and you'll have a whole new motorcycle. Great power and torque, best part is it will be reliable too. You'll be able to jump on it and go anywhere you want anytime.

@kennethkuehl4270 5 месяцев назад

Sent the heads from my 2003 fxstdse to JET in Rhode Island for their CVN cnc shrink porting. Used their jet velocity stack and kn air filter, Andrews 37 conversion cams with had newer hydraulic chains and adjusters had screaming Eagle oil pump and cam plate (upgraded cam bearing) with screaming eagle2 mufflers. Claimed 91 hp and 106 torq. This actually sounds conservative with what this video goes into. Did give it a noticible bump from the factory (with se 203 cam) set up.

@rodleithner7931 2 года назад

04 09 22 purchased a 2002 88 twin cam heritage. only 17828 mi. very clean scoot looks new. $9828.43 out the door. paid cash. It has a carb. I was a little bit shy about the 88. However the local wrench turner assured me the 88 is a good motor and says the same thing about upgrades that you say. Next winter going to turn this scoot into a beast. Thanks for your vids.

@CactusJack252 Год назад

2002 was the last year of the timken bear and forged crank shaft. Make sure the cam tensioner system is upgraded and you will have one of the most reliable twin cams out there

@Chase_N 2 года назад

Seems about the right time for you to do a few vids on upgrading the M8 107. Everything from a Stage 1, to cams, to big bore kits. HD is starting to put them in the Softail frame, which means they're underappreciated & the time is fast approaching that the 107 will be disco'd.

@stevengrchan6590 2 года назад

Went from 88 to 95in now it's a 106 stroker. 02 soft tail

@scottheid9715 10 месяцев назад

🤘🏼😎

@TheFox-fp5zg 8 месяцев назад

Just got mine back from the dyno. 85 hp with 90ft lbs. I’m running the 95”, fueling 525 camchest, with the Barnett scorpion a clutch.

@GixxerFoo 3 месяца назад

Not bad at all on a 95 with that cam, curious what exhaust you're running though.

@ronakins1212 Год назад

I have a 06 Street Glide with the 95 kit with light weight/high compression pistons, an Andrews gear drive cam combo, polished and ported heads, stage 1 intake and PCIII tuner and it dyno tested at well over 100 hp and over 100 ft lbs torque. I can't remember the exact numbers but at almost 80k miles it is still running strong.

@steveallenallen3725 2 года назад

I bought a pair cylinders at a swap meet and had them bored while waiting for my heads to come back from branch flowmetrics ran their cam and pistons on my 02 fxdx turned a 10.22 on the dyno drags 107 hp 127 mph rode it 70000 miles with no probs

@jpabrams1976 Год назад

Have 95 big bore in a 02 ultra ,635 ss cams, port polished heads ,flat top pistons ,kimble wires ,3 angle valve job ,fueling camplate ,oiler,and injectors power commander 5,50mm throttle body Dan motto 2 into 1 pipe with custom baffle, and she runs hard and upsets a lot of folks

@pcontiman 2 года назад

Thanks so much. Upgrading my screaming eagle 95 to tw6 and head work is the plan.

@GixxerFoo 2 года назад

Good choice! That will be like a whole new bike!

@leonardstanford1877 2 года назад

I would bore & hone the cyclinders to a set of Wiesco 10&1/2 pistons if you want torque use a1.900 intake valve & A 1.630 ex valve along with high lift springs if you want all out HP the intake valve should be a 2 inch .I like to use a head off a 2006 & up ( a lot less material to remove to make a good head . Cams should be 585 lift to 635 lift . Forget about woods cams every one of those has what I call the woods drop )they make the power for a short minute then the power drops off just when you want it to keep pulling ! Want even more bore the cases to accept 4&1/8 bore cyclinders for 107 cu in ! The 95 is my choice the 107 RULES ! Short stroke big bore !

@getoffmygrass6974 2 года назад

Wud up Foo!! Here is my current 95" build with dyno tune. I just ordered some Wood TW-6 cams, obviously not a huge difference between these and my current S&S 510's but why not, I like playing. The best thing about these engines is that they love to rev and cruise at 2800-3k rpms. This bike rips, 0-100 mph she takes my buddy's 2021 107 softail and keeps right up with the 114's. Now mind you, this is thousands more than you need to spend to get the same or better number's. 2002 FXSTB Night Train Pingel Petcock Mikuni hsr42 70 nozzle 25 pilot 162.5 main K&N hi flo AC Daytona Twin Tech ignition Accel wires Accel coil NGK's iridium Fueling cam plate fueling oil pump fueling lifter's S&S 510 cams S&S pushrods S&S 79cc heads .030 mls head gasket S&S rockers Trask breathers Zipper's blueprinted piston / jugs 95" forged flat top 9.5:1 R&B LSR 2 into 1 or Thunderheader ( which I'm presently running ) 100/100 Static 9.95:1 corrected 9.22:1 ccp 192 Rob's Dyno, Gardner MA

@chrismartin6544 2 года назад

I had on 02 FXDX that I did the stage 2 big bore jugs pistons and cams and I would routinely walk away from new 96 and lots of others

@upsidedowndog1256 2 года назад

Now THAT sounds like a fun HD engine!

@mmcclen9 2 года назад

I have one of these in a 2001 RK. It was installed when the bike was new. I bought the bike wrecked with 25k mile - it sounded like the valve train would fail at any moment. Since then I've installed Feuling cam plate and gear drive tw-6hg (same cam that was originally installed, shimmed the rocker arm end clearance to under 0.010. Finished it out with Reinhardt tru-dual and a Ness super sucker. Ii have not had it dyno'd but believe it is over 100 hp. I also am disappointed with my 2008 SE 110 with the same set up. It's nearly putting ou 101 hp and 109 Ft/lb.

@crspcritter 2 года назад

Right on ; little monster - Got my pistons gaskets ready ; waiting on cyl boring . Going to change out valve guide seals while heads off . I went with cast pistons 10:25 to one . Cam should bring that down a bit . 125 psi on compression test with stock pistons right now . High rpm recommend forged . Well the new rage around here is electric bicycles. Bidenomics I guess with the gas prices I guess.😁 ✊🏻👍👌 thanks for the info 🙏 Not worried about sprocket bearing for hd when bigger and bigger with that same bearing . Fingers crossed 🤞-

@capecodbiker9902 2 года назад

Great video bud. I’m a m8 guy but I still like watching

@boxcarbro3043 2 года назад

Dude. thanks for these videos. Gotta do this.

@jorgemelchor9000 2 года назад

Great content as always keep the job homie Gixxer. Regards...

@13DTodd Год назад

Just found this video while debating if i want to build my 88” road king or sell it. I think it might be fun learning to build it

@retiredguyadventures6211 Год назад

I've watched this video a couple of times now and you have me seriously considering changing out my Andrews TW26 cams with the Wood TW6. I had the TW26 cams installed as part of a stage 2 upgrade, but I didn't go with a hydraulic cam chain tensioner because at 37,000 miles there didn't seem to be enough wear to bother. I now want to do a stage 3 big bore kit on my 2006 feul injected Road King and maybe do the Wood TW6 cams plus the hydraulic tensioner. 104HP and 116 ft lbs tq ain't nothing to sneeze at! I do like the TW26 cams though because they come in at 1800/2000 rpm and pull like hell to as fast as I'm will to go, but the dyno chart of the TW6 cams look like they kick in right at 2000 rpm as well.

@kjetillien4677 2 года назад

Great video, again !! Very useful information !

@warmachine6859 Год назад

did one on my 2004 softail had head work done 570g cam s&s super g wih thunderjet crane ignition thing pulled like a animal

@MAC-co4cr 2 года назад

Excellent show brother

@MrAirmentbob Год назад

95 kit w 96 ci heads w headwork, 543 cams, s&s crank, mikuni 42 via lightweight chain driven fxr. it runs pretty decent.

@born-again-hooligan Год назад

Exactly what I did with my FXR just a 585 cam. What hp/tQ you achieve??

@blakeumthun8128 2 года назад

The only time I really scared myself on a bike, was on a SE Deuce with the factory 95. Probably would've killed myself if it had better cams. That engine creates a rocket!

@slickwilly1099 2 года назад

@brianstumo8581 Год назад

@@slickwilly1099 I gotta agree i lived 3 blocks from the piggley wiggley grocery store when i was a kid . I agree totally with you!! lol lol

@mickc4633 2 года назад

That 95 kit and a five speed transmission that’ll make it hop

@Punk-Jw Год назад

My 07 street glide has the big bore jugs, bored with a weisco piston 10.5 compression, ss ported heads with screamin eagle intake and throttle body tuned with a full true duel vance and hines exhaust and a custom grind cam. Its an absolute savage. Super super snappy. Eat 107's alive! Not even a match. It helps I've lightened the bike up some and I'm only 140lbs soaking wet lol

@kellyballard1773 2 года назад

You talked me into it !

@jimgomez5396 Год назад

I have the 203 cam an came out with 90 hp an 103 torque on my 95 kit

@Bluis5445 2 года назад

My fxdx has a 95 kit on it. Its ok for what it is.

@alexmorales7320 Год назад

I did this to my bike tw6 cams and heads were ported polished and spring kit

@MAC-co4cr 2 года назад

I went with fueling 575 cams straight gear drive fueling cam chest oil pump and it helped it but when I did the 95 inch bore and the heads on it it made it a rocket ship

@johnippolito2376 2 года назад

what did you do to the heads?

@MAC-co4cr 2 года назад

@@johnippolito2376 the heads are basically stock just cleaned them up and they change the valve springs in them and put compression releases in them

@MAC-co4cr 2 года назад

@@johnippolito2376 it's really strong right off idle all the way up through the mid-range that's why I didn't Port anything they just polished the heads up I love it

@davidson2004fatboy 2 года назад

GOD BLESS the 95 " TWINKIE 🙏 MY 95 KIT WITH WOODS TW6 97 HP 110 TQ CARBURETOR PULLS LIKE a FREIGHT TRAIN S/S GEAR DRIVE STOCK CYL. ( MY STOCK 88 BORED OUT CYLINDERS WERE NICELY HEAT SEASONED for BORING ) V/H PRO PIPE

@GixxerFoo 2 года назад

They don't build them like they used to is all l can say. Those 95's pull so damn hard from that 4 inch stroke, you ride a 95 like yours then jump on a long stroke 96 with a cam and you'll feel the difference. The long stroke is lazy compared to the short stroke.

@davidson2004fatboy 2 года назад

@@GixxerFoo THANK YOU SIR, I APPRECIATE the FEEDBACK. CARBED ALSO

@drewmacmillan6954 Год назад

Great post. My 2000 ultra 95 in , Runs with, and amuses my palls big boar hot rod bikes. Oh yea, I run Bob Woods Cams. Cheers

@heraldlee8112 2 года назад

I'm getting ready to do my 04 deuce. Cams are done and waiting on new cylinders piston and heads.

@daviddeleeuw2493 2 года назад

Hi what sort of cams are you running? Looking at doing my 04 Deuce as well. Cheers

@heraldlee8112 2 года назад

525 fueling cams. Runs great now with new pistons n heads.

@stevecrawford7814 2 года назад

Nice, my 88 with a two into one exhaust out runs 107 soft tails. I need to bump it up.

@jradish 2 года назад

no it doesn't

@SaltyandSprinkles 2 года назад

I googled “how to make a grenade” and this video came out 😂. My 88 was my favorite engine out of my harleys, but it blew up as well as tons of others that I knew who has them as well. Sucks they just can’t build reliable with their awesome fit finish and awesome sounding machines

@GixxerFoo 2 года назад

The 88's had the tensioners that basically turned the engine into a grenade if left unchecked lol.

@SaltyandSprinkles 2 года назад

@@GixxerFoo yup! Now that I know, I wouldn’t hesitate to get another one, but do it up right.

@kingofarcadia12 2 года назад

You should do a video covering the 95" HTCC builds. I'm in the middle of one and can find no videos anywhere referencing them.

@PunMidas 4 месяца назад

Im running a dave mackie megasphere 95, 10.5-1 comp, ported and polished heads 510 cams. Runs great but a coil/ignition with a bigger carb would complete it.

@coolgeek08 2 года назад

I would love you to do a review of a 124r engine

@tomedwards3814 2 года назад

A short stroke Twin as a Square Build ( 4x4 ) is a great engine for a light bike such as a Dyna or Softail riding locally. Without a doubt its a peppy engine and that 88in had the tried and true durable crank that was bolted together. But to say the bigger stroke engines are a bit slower to jump up and run as quickly isnt the case. The cams with compression dictate the peak torque and horsepower regardless of displacement. You smack the throttle on a big bore long stroke with a set of cams for torque. You better have a stout driveline to handle that level of power and have velcro on your seat, ass, gloves and grips. I have seen bike engines bang a 120ft pds of torque at 2200 rpms and carry that and more out in the upper rpms. I rode a 2002 Dyna Super Glide with a 95in stage 2 kit Mild head work with high lift springs, 48mm Mikuni Carb, Andrews TW54 set of cams and the original V&H Pro pipe. It was a great short ride bar hopper!!!

@GixxerFoo 2 года назад

Big cams and hot compression will overcome a lot for sure, a 95 in a touring bike with a high torque cam works really well. With the 5 speed transmission it keep the motor right in that rpm range on the highway for great roll on passing.

@tomedwards3814 2 года назад

@@GixxerFoo My current 124" in my 2008 Road Glide trike. Is a tractor engine. Compression is at 10.2 and I changed front and rear belt sprockets to a 30/70 ratio. Not sluggish at and any rpm and yes there is heat. Mostly due to the added weight and wind resistance of the trike body and my fat ass sitting on it. 😂😂😂

@georga1954 Год назад

Hey GixxerFoo, super Video (as always) - pls keep up the great work! As far as my RK Custom SE 2005 goes, hell yes, what a beast! But after riding and enjoying it for more than a year, i am curious (as a Non-Mechanic) whats really in this TWIN CAM 88??? From the outside the Engine shows SE + CNC Ported + SE Exhaust + SE high flow air filter. The Pre-Owner said that `everthing` was done by the factory as a `full SE package`. Who can help?

@JCunningham21 2 года назад

Iv mentioned it befor on your videos but my 03 FLHRCI 95ci stage 4 with mild Andrews 37G cam im at 100hp 107lbft.

@GixxerFoo 2 года назад

Andrews makes a hell of a cam! The right cam makes all the difference, those are some really good numbers and that's reliable power!

@gnsmk357 2 года назад

great information. thanks.

@GixxerFoo 2 года назад

Thank you, l really appreciate the support!

@hugieflhr03 2 года назад

You nailed it!

@GixxerFoo 2 года назад

Thank you!

@PeterSmith-or3pq 2 года назад

U bet cha! Love it . V@h propipe. Rocking out

@GixxerFoo 2 года назад

Rock on!

@eminor7536 2 года назад

Hey GixxerFoo thanks for putting out great content and all kinds of valuable hands on knowledge. I have an 06 Electra glide so far I’ve done the 95 kit se pistons, se heads s&s 510 gear drive cams fueling cam plate, se 90 degree air breather and thunder header 2 into 1. I Haven’t had it tuned yet but I’m wondering if I’m getting pretty much all I can get out of a 95 build. I think I was expecting a bigger difference in seat dyno. Would you recommend a different cam choice maybe , I’d like it to pull harder or am I expecting too much out of a 95.

@GixxerFoo 2 года назад

Wood makes some pretty good cam that will day down some power all over the chart. The cam you have is really meant to run with the stock heads and compression, a cam swap would really benefit you quite a bit. Since you've got the heads a Wood TW-8 is a pretty hot cam that will really make it run hard.

@eminor7536 2 года назад

@@GixxerFoo Okay that sounds good, I think I’ll order the the TW-8 and then get it tuned and see what it feels like. Thank you for assistance I appreciate it.

@xlrider1565 2 года назад

How's about adding a pair of performance ported heads? Would adding bigger valves help also? What is your take on knifeedging the flywheels, or, is keeping the flywheels weight heavier, better for these 88" T.C.'s?

@vmaxrich Год назад

GREAT content!! I have a question. I just picked up a 2000 Dyna Low Rider. It's had some work done to it. I know it's got an S&S carb. But how do I tell what else was done without tearing it down?

@michaelmitchell5909 2 года назад

Loved this one man!....especially cause I just bought a used road king. The dude said he put a 95" kit in it with 525 cams. I don't have any numbers but this thing pulls pretty good. It'll run 100 mph at 3 grand. Are those 525 cams a fueling cam?...he didn't know cause a shop did the work. Also it has stock heads with true duals so headwork and a 2 into 1 with a hpi throttle body should be a huge performance boost would you agree?....any advice from you is well received man love your channel

@petemathieson333 2 года назад

525’s are the Feuling Reaper cams.

@GixxerFoo 2 года назад

Yeah Feuling cams, I would go for the head work and the exhaust and see where you land. Throttle bodies are crazy expensive and being a 95 it may not be of much benefit to add a throttle body. Now having the throttle body ported wouldn't be a bad idea at all and Hammer Performance does that like 100 bucks.

@michaelmitchell5909 2 года назад

Thanks man. I had a hpi throttle body on my built 103 and it was pretty damn amazing....with ported heads, bigger jets and 90 degree air filter It was a damn strong running engine but you could fry an egg on the rocker box covers

@jerrycagle7565 2 года назад

Looking to put a 95 on my 2000 ultra classic, what would be the best cams for the most torque, also watched all your video, great infor.

@candersson7419 2 года назад

Very happy with my 1999 95" tc. I would however love an extra 100 hp on top of the 100 I have.

@slickwilly1099 2 года назад

then buy a victory. or indian.

@shannonstiles8751 2 года назад

After this riding season this will happen 🇺🇸

@GixxerFoo 2 года назад

It's worth the investment on an 88!

@hookerrods3 2 года назад

Do you have a Harley shop. If so where is it Thanks for the great videos

@martinyeskey5214 2 года назад

Can you do a video on the comparison between the S&S MR103 and the Woods TW 222 CAMS? Thank you!

@GixxerFoo 2 года назад

Not a bad idea, but depends on which engine it's in and what your goals are as far as power delivery. Wood is going walk just about everything out there as far as power, now where you get that power is the real story.

@stephanfrederickson2689 Год назад

I've got a 2005 Fxstdi Stage 4 95 big bore kit with screaming eagle 585 cams ,58 mm throttle body intake with hyper charger. 10.5:1 comppression with the relief valves. Performance springs adjustable push rods. Just wish it was a 6 speed. Not sure what the HP and torque is. I bought it as is from the dealership.

@richardsensky3383 2 года назад

thank you

@GixxerFoo 2 года назад

Welcome!

@jeffuda3638 Год назад

I have an 2002 heritage softail with a Jerry branch complete 95 kit with heads and cams. Let me tell you she a screamer and will out run a stock 114 M-8.

@strmtrpr42 2 года назад

I bought my 05 FLHR 2 years back with the SE95 kit already in it with the 203 cam. I have not replaced the cams yet but I did the SE cam plate, a S&S header, S&S intake and a Thundermax controller with add on 02 sensors and it still hauls. I am on the fence about replacing the cams. Who thinks it is worth it?

@superplumber5 2 года назад

Me ....I would go wood's cams ...they make amazing power and torque...I have them in my Dyna.

@lowrider3060 2 года назад

Hey man awesome information but have a question if I just changed cams in my 88 2002 dyna will this help me and how much horsepower and would it give me

@GixxerFoo 2 года назад

It really depends on the cam, horsepower can range from 75-80ish and torque high 80's to low 80's. Here's a video on what a cam swap alone can do in your 88 ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tV5LcDXx3xA.html.

@ardyrides834 2 года назад

I just noticed the exhaust headers on that Purple Dyna at the beginning of this video. I sure would like to have those on my Bike! Anyone know the brand of those pipes and where to get them?

@64Goef 2 года назад

Very tempting, not sure if this is a wise thing to do on a 160k kilometer '88 electra glide. 🤔

@whatyoumakeofit6635 2 года назад

It would be difficult to turn a evo I to a twin cam. Hey, that would be cool, it's not been done before. My opinion is a evo is better to have than any twin cam

@64Goef 2 года назад

@@whatyoumakeofit6635 ha no, that would be difficult. 88"cubics i meant. Its a 2004 EG. 😬🙂

@retiredguyadventures6211 Год назад

I currently have a stage 2 kit in my 06 Road King with Andrews TW26 cams and am getting ready to do a big bore build. I have spent hours going through Harley forums about what works well with these cams, and the same recommendations have come up over and over again from different forums. They recommend a 95" build and a 9.6 compression ratio for the Andrews TW26 cams?

@davypig571 2 года назад

I'm here because of the beautiful screen shot.

@xlrider1565 2 года назад

Regarding S.E. parts, I'm biased against, because I feel The Motor Co. should have put bigger cams in from the start. Unless, they are limited, due to emmissions constraints, then I relent. Still, I'd rather look into Woods, Reaper, S&S, or similar for aftermarket goodies.

@scottheid9715 10 месяцев назад

Ok , so I have this same setup in an 04 softail . With the largest screaming Eagle cam , stage 2 I believe. With Zippers heads . Tuned when it was installed at 102 HP / 104 FPT . Lots of fun ! Problem I’ve been having since is when I’m hammering on it , highway riding , coming to a slow down or stop the bike idles down to a complete shut off . Also an serious lack in power . Starts right back up and idles fine . I’ve had this bike in a few shops , zero solution . We’ve changed throttle body , and a few other small things . Anyone have any knowledge to share , I’d greatly appreciate it . I’m seriously lost on this one ! Thx y’all have an awesome day 🤘🏼😎

@nikasumo 2 года назад

Hammer performance 98” big bore kit would go best with which cams?

@GixxerFoo 2 года назад

Depends what you want to do with it, but with the 10.5:1 compression if you had the heads done with springs the Wood TW-8 would really make it rip! If you're running stock heads a TW-6 would be a good match.

@scottflora8876 2 года назад

I upgraded my cam chest on my '02 flht. Luckily the tolerance on my pinion shaft was a maximum of .0016", so I went with the S&S gear and .509 cam upgrade kit along with a Ness big sucker. It runs awesome! Down the road I'm thinking about the 95" upgrade also. What are your thoughts?

@GixxerFoo 2 года назад

The Timken bottom ends like you have are rock solid, shame they don't build them like that anymore. I'd have no reservations about putting a 95 top end on that bottom end.

@jondoe8816 2 года назад

I got 509 in my stock 99 model 88 pulls good but my 01 model 95 ci 570 cam. Goes better lol

@scottflora8876 2 года назад

@@GixxerFoo thanks for your input! I went with the 509 cams so I wouldn't have to tear into the top end. I'm new to working on Harleys, but loved wrenching on this upgrade! My wife helped when I cut the original pushrods with a bolt cutter!!! Lmao 🤣