High Pressure Fuel Pump Cam Follower Maintenance 07 Audi A4

1A Auto: Repair Tips & Secrets Only Mechanics Know

Подписаться 2,4 млн

Просмотров 135 тыс.

50% 1

1A Auto shows you how to check your high pressure fuel pump and cam follower for maintenance. This video is applicable to many Volkswagen vehicles, such as the A3, A4, Golf, Passat, MK5, MK6, and Jetta
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oHZ/1AXAA00013
• 13mm Wrench 1aau.to/ogF/1AXAA00010
• 17mm Wrench 1aau.to/ogF/1AXAA00010
• 8mm Triple Square Driver
• Needle nose pliers 1aau.to/oeL/1AXAA00051
• Needle nose pliers 1aau.to/oeL/1AXAA00052
• T30 Driver 1aau.to/oh9/1AXAA00008
• Ratchet 1aau.to/oIH/1AXAA00016
• Cloth Rags 1aau.to/odx/1AXSS00035
For More Info visit us at 1aau.to/h/ahs/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Авто/Мото

Опубликовано:

15 май 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@1AAuto 3 года назад

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@kjdaby 6 лет назад

Well explained. Great help. Thanks for this

@jhirsch123 7 лет назад

FYI... If you have the later revision with the hose, instead of the banjo bolt, you don't need to remove the hose in order to replace the cam follower! I wish I had known that before spending my weekend screwing with that god awful spring clip!

@e.e9331 4 года назад

jhirsch123 thank you for your comment! Saved me from destroying myself small rats ass of a place try in a remove the spring clip

@guisseppebm 3 года назад

So there is enough space to pull out the fuel pump to inspect and or replace the Cam follower with out disconnecting the high pressure hose at the bottom?

@tendyfish 3 года назад

very informative, thank you. you make it look so easy :)

@radu0505 6 лет назад

Great video

@TheOkram 4 года назад

Had hard time , puting back hard fuel line back , my spanner just didn't want to hug , to tighten it...too fat😅 very well explained tutorial

@matthayden708 2 года назад

Very helpful video. About to replace mine on my Audi.

@1AAuto 2 года назад

+matt hayden Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@Younghypes 5 лет назад

Awesome so is there a certain way the cam follower should go? And does the Audi A4 2.0T 2007 have more than 1 fuel pump?

@enriquet548 Год назад

I got all those codes but had other stuff replaced like Oxygen sensor and PCV valve. Cleaned MAF sensor and lightly cleaned the throttle body without removing it. The codes went away but still have the same problem. I am replacing the h.p. fuel pump and cam follower myself soon. 163k miles on Audi A4 so I'm sure everything is wearing down fast at the same time.

@MarkPatton-hu9cn 2 месяца назад

Awesome simple

@roybm3124 8 лет назад

Removing the rubber hose with a screwdriver is a bit risky but nice video.

@riccccccardo 7 лет назад

The last six months plus my 2.0 tfsi better have misfires, stuttering and 1-2 second power losses codes came up P0087 and P1093 I've suggested to mecanic about camshaft lobe or cam follower or high pressure fuel pump.

@jakemiller8610 3 года назад

were can i order the earlier virsion high pressure fuel pump i have the 1 with the banjo bit fitting

@sofiflonflin9551 6 лет назад

Hello, Ricardo from Chile, I would like to know wich is the right work pressure of this pump? could you tell me the right values? Greetings from Chile

@riccccccardo 7 лет назад

And 1 a auto pars thanks for the video but it would be better you put fault codes in your description or search perimeters as I've been searching for this type of video for ages and your video did not come up it was randomly suggested to me via utube without me searching for it when I needed it.

@ihatemyjobman Год назад

Do you recommend checking the cam follower on a 3.2 b7?

@whatsshaken Год назад

I bought the stud conversion kit with nuts, instead of getting new bolts, which tend to strip out the body threads due to wear etc... The problem with the new stud kit is, the pump wont fit over the studs, unless you remove the thrust sensor, 1st, when the pump is on the engine. I didn't have a vice. Also I found, removing the brake vacuum tube from the firewall, creates a good amount of space

@TurdKutter 6 лет назад

will this fix misfire also ?

@tedsterb 2 года назад

Does the new pump come with both electrical sensors, or just the black one on top?

@swimers100 2 года назад

I broke the bolts that hold it in place what is the name of the part the fuel pump actually attaches to? Thinking of replacing it

@TheHomeSavers 4 года назад

How does one test high pressure fuel pump if there is no seen shows of damage to pump?

@John-gj5fc 3 года назад

will it also be the cause for a p2294 code?

@SoCalGullwing Год назад

Is the location for a Q5 identical? I haven’t looked at it, but my daughter is complaining of a fuel smell and a local mechanic is saying: a fuel pump replacement is required. From the quote, i can tell he’s asking higher then expected. What’s a good place to purchase a pump other then the dealer? Thank you Great video.

@user-uq8nk5rh1z 4 года назад

If you can help me or advice!? I have audi a8 4.2l 2008 model. I have problem with starting a vehicle (not always) after driving a while ,after about 20 30 km . Once I shut it down, and come back to start it again after 10-15min, engine will start ,and once I go ,after few meters engine stops by itself. Then I open the bonet ,pour water on high pressure fuel pump, going back inside ,and vehicle will start normally. Until next turning off. I've changed pump, fuel sensor on pump, few connectors... but it happens again. Please for help!

@1AAuto 4 года назад

+Slavcho Misheski We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com

@travelsworld7920 2 года назад

It is seems like very easy to install fuel pump but where is the fuel pressure regulator located in the pump or outside of the fuel pumps?

@matthayden708 2 года назад

The fp regulator is the brass part that connects to the hard fuel line

@m4re94 4 года назад

Does 1.6 FSI engines has this problem?

@pastelproductions8126 4 года назад

I took out the fuse for fuel pump is that okay?

@LaMorenita21 Год назад

What are those connectors card for the fuel pump???

@BOHICA_ 6 лет назад

Shouldn't you just change out the follower as a precaution instead of having to check it every 20k? Is there a synthetic oil that helps prevent this?

@1AAuto 6 лет назад

+John Be Bad You can absolutely do that, but it is not necessary to do so. There is no oil or lubricant that helps prevent this item from normal wear and tear. 1aauto.com

@chimasniper4698 8 месяцев назад

hi, i have audi a4 b7 2.0t fsi s-line. I have the following problem eror code (p2293 fuel pressure regulator 2) and two p0087 fuel rail/system pressure too low. The engine runs very poorly. what is the problem?

@ParallelSkier 7 лет назад

what do you charge?

@IslandBlaze1k 3 года назад

Do you have a part number for the upgraded hpfp?

@1AAuto 3 года назад

+Wadner Blaise Great Question, I apologize we currently do not carry this part.

@Ardian1988 7 лет назад

I want to order this part for my audi a4 quattro 2.0 2006 on your website, but i cannot find it. Do you have it in stock and how much does it cost. How quick can you deliver it to Calgary Canada

@1AAuto 7 лет назад

+AE1988 Thanks for watching, but unfortunately we do not carry the part in the video! We do ship to Canada, so keep us in mind in the future! 1aauto.com

@TheOkram 4 года назад

Part number eBay etc 06d109309c fitted my 2.0 tfsi a4 Quattro 2006

@jclark7164 2 года назад

Rubber lower hose was damaged it was split

@youngdeity666 2 года назад

Greetings and salutations to YOU! I’m chiming in regards to the following fault CODE. P3089 this particular code manifested once the Mechinc install my NEWLY TUNED ECU MODUEL. Can YOU PLEASE RENDER SOME AID AS IN INTEL AS TO WHY THIS MECHANICAL ISSUE ARISED? Respectfully.

@michaelmiranda5319 7 лет назад

p0089 ..says its fuel pressure regulator ...what do i need to order

@1AAuto 7 лет назад

+michael miranda P0089 usually means there is an issue with the fuel pressure regulator system, and does not necessarily mean you need that part. I found this link that goes into more detail. www.yourmechanic.com/article/p0089-obd-ii-trouble-code-fuel-pressure-regulator-1-performance-by-spencer-clayton

@jonathangts5505 3 года назад

I have the same problem with the fuel pressure idk if the fuel pump working from stock dealerships

@1AAuto 3 года назад

+Jonathan GTs550 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@BattOnly 11 месяцев назад

Also, you do not have to remove the hose on the HPFP if you have that style, the pump should just pull out enough to change out that cam follower.

@1AAuto 11 месяцев назад

+Batt We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair.

@davispaul82 3 года назад

Can you help me with this fault code. replaces the sensor, voltage on the three terminals check out, but at 1/4 throttle car seems to run ok but halfway to wot car falls on it face. Someone suggested a clogged exhaust system which Ill check tomorrow but I think it might be the transmission although no codes are thrown via Ross_tech besides the one below: 1 Fault Found: 000400 - Fuel Pressure Sensor (G247) P0190 - 001 - Circuit Malfunction Freeze Frame: Fault Status: 01100001 Fault Priority: 0 Fault Frequency: 1 Reset counter: 255 Mileage: 200716 km Time Indication: 0 Freeze Frame: RPM: 674 /min Load: 30.6 % Speed: 0.0 km/h Temperature: 103.0°C Temperature: 42.0°C Absolute Pres.: 980.0 mbar Voltage: 13.208 V

@1AAuto 3 года назад

+Paul Davis We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@davispaul82 3 года назад

@@1AAuto I did manage to fux the car. One of the pins in the new Hign Pressure sensor was bent for some reason which made it hard to clip. Went to the dealer to pick one up for the G247 code and supposedly both high and low pressure sensors fall under that code and the parts guy gave a the low sensor. During inspection of the to sensors is when I noticed that a pin was bent. I straightened it out, put it back in, run VCDS, cleared the code which didnt want to dissapear and then took the car for a test drive and you could tell the difference. Are runs and shifts perfectly.

@monayhussen4376 2 года назад

Where would the Schrader valve Connect to

@matteoadams1294 2 года назад

Doesn’t connect to anything. It’s a pressure relief valve.

@fredwood630 3 года назад

my audi a4 2007 has this code p12a12 how to solve this problem

@1AAuto 3 года назад

+Fredy baires handyman We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@fredwood630 3 года назад

@@1AAuto the cam follower when it is worn that causes the engine

@breekthezeek6547 7 лет назад

If hpfp fail will car crank

@786hunzavalley 5 лет назад

Hi, nice video thanks, Just a question, have you encountered any situation where HPFP is faulty and car doesn’t start and spark plugs gets flooded . I took my car to 2 mechanics but no resolution yet. Can faulty HPFP sends more fuel than required and not let engine to start instead get it flooded. Look to your reply,

@1AAuto 5 лет назад

+786hunzavalley Thanks for watching! A faulty HPFP can definitely cause your engine to not start. Even it it did start it would not run very well, and the pump would need to get replaced right away. 1aauto.com

@786hunzavalley 5 лет назад

1A Auto Parts thanks for your reply. So you can confirm that faulty HPFP can cause engine flooding, there were 2 codes just before this non start issue. p2293 & p3008 when engine running. P3008 was due to big vacuum leak,. But p2293 never came back after deleting all codes and car also didn’t start. I removed HPFP , everything seems ok visually , everything intact, no fuel leak from spring side, cam follower in decent condition. THIS IS 12 years old car, and HPFP is genuine , which came with car. Replacement should be due I guess. Just wanted to know that engine flooding can be caused by HPFP. Few people told me online that faulty ECU also causes overfueling & engine flooding. Thanks for your help.

@ads7686 3 года назад

Would p0089 also be triggered by this?

@1AAuto 3 года назад

+AD S The P0089 is a diagnostic trouble code for a fault found with the fuel pressure regulator.

@ads7686 3 года назад

@@1AAuto so would i have to replace the fuel pressure regulator

@ads7686 3 года назад

@@1AAuto hi so i first got a p0089 code and after that code i got a p0171 from running to lean so it seems like it could be the fuel filter/fuel pressure regulator causing these issues. am i correct that this could possibly be the issue?

@ParallelSkier 7 лет назад

How much does this service usually cost?

@1AAuto 7 лет назад

+Roland L The job itself should not take a reputable shop more than an hour or two to perform. It will depend on the rate of labor and parts.